arXiv subjects

Jason E. Austermann

Publications and source records attributed to Jason E. Austermann.

At least 19 recordsLinked to original sources

arXiv2026

CCAT: The Prime-Cam Instrument for the Fred Young Submillimeter Telescope -- Overview and Status

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST), under construction at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam will deliver over ten times greater mapping speed at submillimeter wavelengths than current facilities for unprecedented broadband and spectroscopic measurements in windows between 1.4 -- 0.3 mm (220 -- 850 GHz). When fully populated, Prime-Cam will field over 100,000 kinetic inductance detectors across seven independently optimized instrument modules. With Prime-Cam, the CCAT Collaboration will address a suite of science goals, from Big Bang cosmology, to galaxy evolution and star formation over cosmic time. Prime-Cam is scheduled for integration in FYST in late 2026, followed by a year of early science observations with the 280 and 350 GHz instrument modules. We discuss the design and in-lab testing of the 1.8-m diameter Prime-Cam receiver and 280 GHz instrument module, and give an update on deployment status and early science plans.

astro-ph.IM↗

arXiv2026

Laser-micromachined silicon-platelet feedhorns for large-scale submillimeter and millimeter-wave focal planes

We present the fabrication and characterization of the first silicon-platelet feedhorn arrays produced using laser micromachining. First, we present a demonstration of the technology for the millimeter-wave band of 80~GHz to 170~GHz, i.e. covering the 90/150~GHz bands typical of CMB experiments. Next, we expand the technology to large-scale production on 150~mm wafers and demonstrate operation at submillimeter wavelengths. This feedhorn array is optimized for operation in a band centered at 350~GHz (330~GHz to 370~GHz) and is being deployed as one of the focal plane elements of the CCAT 350~GHz module of Prime-Cam. We present the design and fabrication processes for these feedhorn arrays and compare the optical performance directly to simulation and to feedhorns of identical design but produced using traditional deep reactive-ion etching (DRIE). We conclude with a discussion of future expansions of this technology, including the potential of sidewall control and using thicker (and thus fewer) wafers, which could significantly reduce production costs and labor.

astro-ph.IM↗

arXiv2026

picoMUX: microcontroller based time-domain multiplexing readout for kilopixel TES arrays

Advances in cryogenic SQUID-based time-domain multiplexing (TDM) have outpaced their warm readout electronics. Next generation CMB telescopes are baselining kilopixel TES arrays with few viable electronic options. We present picoMUX, a new TDM readout electronics architecture that replaces the FPGA typically used in such systems with a complement of modern microcontrollers. Designed around the current generation NIST multiplexer, it fully exploits its differential nature and two-level switching. The system achieves the desired timing metrics (sub {\mu}s row dwell time) while reducing cost, complexity, and power consumption over a comparable FPGA solution. Preliminary noise measurements are consistent with expectations and show no evidence that the novel architecture introduces excess noise. picoMUX demonstrates how recent advances in microcontrollers enable simpler, low-power, low-cost TDM readouts for kilopixel TES arrays.

astro-ph.IM↗

arXiv2026

Sub-Kelvin Cryogenics for a Super-Pressure Balloon-Borne CMB Polarimeter: Taurus

Taurus is a balloon-borne cosmic microwave background (CMB) experiment designed to operate more than 10,000 transition-edge sensor bolometers at a base temperature near 100 mK during a multi-week stratospheric balloon flight. This platform provides near-space observing conditions while imposing stringent constraints on mass, power, and system robustness, driving the need for a lightweight and highly reliable cryogenic system. To meet these requirements, Taurus employs a multi-stage cryogenic architecture. A 660 L liquid helium tank provides a stable 4 K reservoir, with vapor-cooled shields establishing intermediate stages at approximately 40 K and 80 K. A superfluid helium tank provides an approximately 1.5 K takeoff point for the sub-Kelvin cooling systems. Each of the instrument's three receivers is supported by an independent sub-Kelvin cooling chain that includes closed-cycle 3He sorption refrigerators that cool to 300 mK. These provide the thermal intercept and takeoff for a Chase Research Cryogenics miniature dilution refrigerator that cools the detectors to approximately 100 mK. Here we discuss the requirements and challenges of the Taurus sub-Kelvin cryogenic system and present results of early performance tests.

astro-ph.IM↗

arXiv2025

CCAT: Design, Implementation, and Testing of a System to Read Out over 10,000 280 GHz KIDs using RFSoC Electronics

Over the past decade, kinetic inductance detectors (KIDs) have emerged as a viable superconducting technology for astrophysics at millimeter and submillimeter wavelengths. KIDs spanning 210 - 850 GHz across seven instrument modules will be deployed in the Prime-Cam instrument of CCAT Observatory's Fred Young Submillimeter Telescope at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. The natural frequency-division multiplexed readout of KIDs allows hundreds of detectors to be coupled to a single radio frequency (RF) transmission line, but requires sophisticated warm readout electronics. The FPGA-based Xilinx ZCU111 radio frequency system on chip (RFSoC) offers a promising and flexible solution to the challenge of warm readout. CCAT uses custom packaged RFSoCs to read out KIDs in the Prime-Cam instrument. Each RFSoC can simultaneously read out four RF channels with up to 1,000 detectors spanning a 512 MHz bandwidth per channel using the current firmware. We use five RFSoCs to read out the >10,000 KIDs in the broadband 280 GHz instrument module. Here, we describe and demonstrate the readout hardware, software and pipeline for the RFSoC system. We present a detector position map of the 280 GHz module focal plane and preliminary averaged spectral responses of a small subset of detectors from the TiN and first Al arrays. These measurements demonstrate our ability to simultaneously readout thousands of detectors, validate the end-to-end performance of the readout and optical systems, and represent a critical step toward reading out the ~100,000 KIDs in Prime-Cam in its future full capacity configuration.

astro-ph.IM↗

arXiv2025

CCAT: Mod-Cam Cryogenic Performance and its Impact on 280 GHz KID Array Noise

The CCAT Observatory's Fred Young Submillimeter Telescope (FYST) is designed to observe submillimeter astronomical signals with high precision, using receivers fielding state-of-the-art kinetic inductance detector (KID) arrays. Mod-Cam, a first-light instrument for FYST, serves as a testbed for instrument module characterization, including detailed evaluation of thermal behavior under operating conditions prior to deploying modules in the larger Prime-Cam instrument. Prime-Cam is a first generation multi-band, wide-field camera for FYST, designed to field up to seven instrument modules and provide unprecedented sensitivity across a broad frequency range. We present results from two key laboratory characterizations: an "optically open" cooldown to validate the overall thermal performance of the cryostat, and a "cold load" cooldown to measure the effect of focal plane temperature stability on detector noise. During the optically open test, we achieved stable base temperatures of 1.5 K on the 1 K stage and 85 mK at the detector stage. In the cold load configuration, we measured a detector focal plane RMS temperature stability of 3.2e-5 K. From this stability measurement, we demonstrate that the equivalent power from focal plane thermal fluctuations is only 0.0040% of a 5pW incident photon power for aluminum detectors and 0.0023% for titanium-nitride detectors, a negligible level for CCAT science goals. This highlights the success of the cryogenic system design and thermal management.

astro-ph.IM↗

arXiv2025

The Atacama Cosmology Telescope: DR6 Power Spectra, Likelihoods and $Λ$CDM Parameters

We present power spectra of the cosmic microwave background (CMB) anisotropy in temperature and polarization, measured from the Data Release 6 maps made from Atacama Cosmology Telescope (ACT) data. These cover 19,000 deg$^2$ of sky in bands centered at 98, 150 and 220 GHz, with white noise levels three times lower than Planck in polarization. We find that the ACT angular power spectra estimated over 10,000 deg$^2$, and measured to arcminute scales in TT, TE and EE, are well fit by the sum of CMB and foregrounds, where the CMB spectra are described by the $Λ$CDM model. Combining ACT with larger-scale Planck data, the joint P-ACT dataset provides tight limits on the ingredients, expansion rate, and initial conditions of the universe. We find similar constraining power, and consistent results, from either the Planck power spectra or from ACT combined with WMAP data, as well as from either temperature or polarization in the joint P-ACT dataset. When combined with CMB lensing from ACT and Planck, and baryon acoustic oscillation data from DESI DR1, we measure a baryon density of $Ω_b h^2=0.0226\pm0.0001$, a cold dark matter density of $Ω_c h^2=0.118\pm0.001$, a Hubble constant of $H_0=68.22\pm0.36$ km/s/Mpc, a spectral index of $n_s=0.974\pm0.003$, and an amplitude of density fluctuations of $σ_8=0.813\pm0.005$. Including the DESI DR2 data tightens the Hubble constant to $H_0=68.43\pm0.27$ km/s/Mpc; $Λ$CDM parameters agree between the P-ACT and DESI DR2 data at the $1.6σ$ level. We find no evidence for excess lensing in the power spectrum, and no departure from spatial flatness. The contribution from Sunyaev-Zel'dovich (SZ) anisotropy is detected at high significance; we find evidence for a tilt with suppressed small-scale power compared to our baseline SZ template spectrum, consistent with hydrodynamical simulations with feedback.

astro-ph.CO↗

arXiv2025

The Atacama Cosmology Telescope: DR6 Constraints on Extended Cosmological Models

We use new cosmic microwave background (CMB) primary temperature and polarization anisotropy measurements from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) to test foundational assumptions of the standard cosmological model and set constraints on extensions to it. We derive constraints from the ACT DR6 power spectra alone, as well as in combination with legacy data from Planck. To break geometric degeneracies, we include ACT and Planck CMB lensing data and baryon acoustic oscillation data from DESI Year-1, and further add supernovae measurements from Pantheon+ for models that affect the late-time expansion history. We verify the near-scale-invariance (running of the spectral index $d n_s/d\ln k = 0.0062 \pm 0.0052$) and adiabaticity of the primordial perturbations. Neutrino properties are consistent with Standard Model predictions: we find no evidence for new light, relativistic species that are free-streaming ($N_{\rm eff} = 2.86 \pm 0.13$, which combined with external BBN data becomes $N_{\rm eff} = 2.89 \pm 0.11$), for non-zero neutrino masses ($\sum m_ν< 0.082$ eV at 95% CL), or for neutrino self-interactions. We also find no evidence for self-interacting dark radiation ($N_{\rm idr} < 0.134$), early-universe variation of fundamental constants, early dark energy, primordial magnetic fields, or modified recombination. Our data are consistent with standard BBN, the FIRAS-inferred CMB temperature, a dark matter component that is collisionless and with only a small fraction allowed as axion-like particles, a cosmological constant, and the late-time growth rate predicted by general relativity. We find no statistically significant preference for a departure from the baseline $Λ$CDM model. In general, models introduced to increase the Hubble constant or to decrease the amplitude of density fluctuations inferred from the primary CMB are not favored by our data.

astro-ph.CO↗

arXiv2025

The Atacama Cosmology Telescope: DR6 Maps

We present Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) maps of the Cosmic Microwave Background temperature and polarization anisotropy at arcminute resolution over three frequency bands centered on 98, 150 and 220 GHz. The maps are based on data collected with the AdvancedACT camera over the period 2017--2022 and cover 19,000 square degrees with a median combined depth of 10 uK arcmin. We describe the instrument, mapmaking and map properties and illustrate them with a number of figures and tables. The ACT DR6 maps and derived products are available on LAMBDA at https://lambda.gsfc.nasa.gov/product/act/actadv_prod_table.html. We also provide an interactive web atlas at https://phy-act1.princeton.edu/public/snaess/actpol/dr6/atlas and HiPS data sets in Aladin (e.g. https://alasky.cds.unistra.fr/ACT/DR4DR6/color_CMB).

astro-ph.CO↗

arXiv2025

Simons Observatory: Characterization of the Large Aperture Telescope Receiver

The Simons Observatory (SO) is a ground-based cosmic microwave background (CMB) survey experiment that currently consists of three 0.42m small-aperture telescopes (SATs) and one 6m large-aperture telescope (LAT), located at an elevation of 5200m in the Atacama Desert in Chile. At the LAT's focal plane, SO will install >62,000 transition-edge sensor detectors across 13 optics tubes (OTs) within the Large Aperture Telescope Receiver (LATR), the largest cryogenic camera ever built to observe the CMB. Here we report on the validation of the LATR in the laboratory and the subsequent dark testing and validation within the LAT. We show that the LATR meets cryogenic, optical, and detector specifications required for high-sensitivity measurements of the CMB. At the time of writing, the LATR is installed in the LAT with six OTs (corresponding to >31,000 detectors), and the LAT mirrors and remaining seven OTs are undergoing development.

astro-ph.IM↗

arXiv2024

Thermal architecture for a cryogenic super-pressure balloon payload: design and development of the Taurus flight cryostat

We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of <100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and is encased in two layers of vapor-cooled shields which allow Taurus to make full use of the extended flight time offered by the super-pressure balloon platform. The Taurus cryostat is projected to hold for over 50 days while weighing under 1000lbs. We present the design, testing, and thermal analysis of the Taurus cryogenic systems.

physics.ins-det↗

arXiv2024

Modeling optical systematics for the Taurus CMB experiment

We simulate a variety of optical systematics for Taurus, a balloon-borne cosmic microwave background (CMB) polarisation experiment, to assess their impact on large-scale E-mode polarisation measurements and constraints of the optical depth to reionisation τ. We model a one-month flight of Taurus from Wanaka, New Zealand aboard a super-pressure balloon (SPB). We simulate night-time scans of both the CMB and dust foregrounds in the 150GHz band, one of Taurus's four observing bands. We consider a variety of possible systematics that may affect Taurus's observations, including non-gaussian beams, pointing reconstruction error, and half-wave plate (HWP) non-idealities. For each of these, we evaluate the residual power in the difference between maps simulated with and without the systematic, and compare this to the expected signal level corresponding to Taurus's science goals. Our results indicate that most of the HWP-related systematics can be mitigated to be smaller than sample variance by calibrating with Planck's TT spectrum and using an achromatic HWP model, with a preference for five layers of sapphire to ensure good systematic control. However, additional beam characterization will be required to mitigate far-sidelobe pickup from dust on larger scales.

astro-ph.CO↗

arXiv2024

The Atacama Cosmology Telescope: DR6 Gravitational Lensing Map and Cosmological Parameters

We present cosmological constraints from a gravitational lensing mass map covering 9400 sq. deg. reconstructed from CMB measurements made by the Atacama Cosmology Telescope (ACT) from 2017 to 2021. In combination with BAO measurements (from SDSS and 6dF), we obtain the amplitude of matter fluctuations $σ_8 = 0.819 \pm 0.015$ at 1.8% precision, $S_8\equivσ_8({Ω_{\rm m}}/0.3)^{0.5}=0.840\pm0.028$ and the Hubble constant $H_0= (68.3 \pm 1.1)\, \text{km}\,\text{s}^{-1}\,\text{Mpc}^{-1}$ at 1.6% precision. A joint constraint with CMB lensing measured by the Planck satellite yields even more precise values: $σ_8 = 0.812 \pm 0.013$, $S_8\equivσ_8({Ω_{\rm m}}/0.3)^{0.5}=0.831\pm0.023$ and $H_0= (68.1 \pm 1.0)\, \text{km}\,\text{s}^{-1}\,\text{Mpc}^{-1}$. These measurements agree well with $Λ$CDM-model extrapolations from the CMB anisotropies measured by Planck. To compare these constraints to those from the KiDS, DES, and HSC galaxy surveys, we revisit those data sets with a uniform set of assumptions, and find $S_8$ from all three surveys are lower than that from ACT+Planck lensing by varying levels ranging from 1.7-2.1$σ$. These results motivate further measurements and comparison, not just between the CMB anisotropies and galaxy lensing, but also between CMB lensing probing $z\sim 0.5-5$ on mostly-linear scales and galaxy lensing at $z\sim 0.5$ on smaller scales. We combine our CMB lensing measurements with CMB anisotropies to constrain extensions of $Λ$CDM, limiting the sum of the neutrino masses to $\sum m_ν < 0.13$ eV (95% c.l.), for example. Our results provide independent confirmation that the universe is spatially flat, conforms with general relativity, and is described remarkably well by the $Λ$CDM model, while paving a promising path for neutrino physics with gravitational lensing from upcoming ground-based CMB surveys.

astro-ph.CO↗

arXiv2024

Instrument Overview of Taurus: A Balloon-borne CMB and Dust Polarization Experiment

Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales ($\ell$ $\lt$ 30) and improve measurements of the optical depth to reionization ($τ$). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the $ΛCDM$ model on large angular scales and providing high-frequency maps of polarized dust foregrounds to the CMB community. These measurements take advantage of the low-loading environment found in the stratosphere and are enabled by NASA's super-pressure balloon platform, which provides access to 70% of the sky with a launch from Wanaka, New Zealand. Here we describe a general overview of Taurus, with an emphasis on the instrument design. Taurus will employ more than 10,000 100 mK transition edge sensor bolometers distributed across two low-frequency (150, 220 GHz) and one high-frequency (280, 350 GHz) dichroic receivers. The liquid helium cryostat housing the detectors and optics is supported by a lightweight gondola. The payload is designed to meet the challenges in mass, power, and thermal control posed by the super-pressure platform. The instrument and scan strategy are optimized for rigorous control of instrumental systematics, enabling high-fidelity linear polarization measurements on the largest angular scales.

astro-ph.IM↗

arXiv2024

The BLAST Observatory: A Sensitivity Study for Far-IR Balloon-borne Polarimeters

Sensitive wide-field observations of polarized thermal emission from interstellar dust grains will allow astronomers to address key outstanding questions about the life cycle of matter and energy driving the formation of stars and the evolution of galaxies. Stratospheric balloon-borne telescopes can map this polarized emission at far-infrared wavelengths near the peak of the dust thermal spectrum - wavelengths that are inaccessible from the ground. In this paper we address the sensitivity achievable by a Super Pressure Balloon (SPB) polarimetry mission, using as an example the Balloon-borne Large Aperture Submillimeter Telescope (BLAST) Observatory. By launching from Wanaka, New Zealand, BLAST Observatory can obtain a 30-day flight with excellent sky coverage - overcoming limitations of past experiments that suffered from short flight duration and/or launch sites with poor coverage of nearby star-forming regions. This proposed polarimetry mission will map large regions of the sky at sub-arcminute resolution, with simultaneous observations at 175, 250, and 350 $μm$, using a total of 8274 microwave kinetic inductance detectors. Here, we describe the scientific motivation for the BLAST Observatory, the proposed implementation, and the forecasting methods used to predict its sensitivity. We also compare our forecasted experiment sensitivity with other facilities.

astro-ph.IM↗

arXiv2024

Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands

The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious new instrument suite, initially comprising three 0.5 m small-aperture telescopes and one 6 m large aperture telescope, is designed using a common combination of new technologies and new implementations to realize an observatory significantly more capable than the previous generation. In this paper, we present the pre-deployment performance of the first mid-frequency "optics tube" which will be fielded on the large aperture telescope with sensitivity to the 90 and 150 GHz spectral bands. This optics tube contains lenses, filters, detectors, and readout components, all of which operate at cryogenic temperatures. It is one of seven that form the core of the large aperture telescope receiver in its initial deployment. We describe this optics tube, including details of comprehensive testing methods, new techniques for beam and passband characterization, and its measured performance. The performance metrics include beams, optical efficiency, passbands, and forecasts for the on-sky performance of the system. We forecast a sensitivity that exceeds the requirements of the large aperture telescope with greater than 30% margin in each spectral band, and predict that the instrument will realize diffraction-limited performance and the expected detector passbands.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of $σ(r)=0.002$, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35$^\circ$ field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and $<0.1$ K focal plane that holds $>12,000$ TES detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

astro-ph.IM↗

arXiv2023

The Atacama Cosmology Telescope: High-resolution component-separated maps across one-third of the sky

Observations of the millimeter sky contain valuable information on a number of signals, including the blackbody cosmic microwave background (CMB), Galactic emissions, and the Compton-$y$ distortion due to the thermal Sunyaev-Zel'dovich (tSZ) effect. Extracting new insight into cosmological and astrophysical questions often requires combining multi-wavelength observations to spectrally isolate one component. In this work, we present a new arcminute-resolution Compton-$y$ map, which traces out the line-of-sight-integrated electron pressure, as well as maps of the CMB in intensity and E-mode polarization, across a third of the sky (around 13,000 sq.~deg.). We produce these through a joint analysis of data from the Atacama Cosmology Telescope (ACT) Data Release 4 and 6 at frequencies of roughly 93, 148, and 225 GHz, together with data from the \textit{Planck} satellite at frequencies between 30 GHz and 545 GHz. We present detailed verification of an internal linear combination pipeline implemented in a needlet frame that allows us to efficiently suppress Galactic contamination and account for spatial variations in the ACT instrument noise. These maps provide a significant advance, in noise levels and resolution, over the existing \textit{Planck} component-separated maps and will enable a host of science goals including studies of cluster and galaxy astrophysics, inferences of the cosmic velocity field, primordial non-Gaussianity searches, and gravitational lensing reconstruction of the CMB.

astro-ph.CO↗