arXiv subjects

Jason P. Allmaras

Publications and source records attributed to Jason P. Allmaras.

16 recordsLinked to original sources

arXiv2026

Reaching the intrinsic performance limits of superconducting nanowire single-photon detectors up to 0.1 mm wide

Superconducting nanowire single-photon detectors (SNSPDs) combine high detection efficiency, low noise, and excellent timing resolution, making them a leading platform for photon-counting applications. However, despite decades of materials and fabrication research, detector performance has never been shown to match theoretical performance expectations. Here, we demonstrate for the first time in situ tuning of a detector from its typical, suboptimal operation, to a regime limited only by material quality, allowing the device to reach its intrinsic performance limit. Our approach is based on current-biased superconducting "rails" placed on either side of the detector that redistribute current across its width to achieve its peak performance. This technique reduces the dark count rate by ten orders of magnitude. Further, we show operation at this intrinsic performance limit for devices up to 0.1 mm wide, and also demonstrate near-unity internal detection efficiency (IDE) at a wavelength of 4um for a 20um-wide detector--a factor of 20 wider than the current state of the art. This work enables future detectors to overcome the Pearl limit for device width, paving the way for arbitrarily large detectors.

cond-mat.supr-con↗

arXiv2025

High-efficiency, high-count-rate 2D superconducting nanowire single-photon detector array

Superconducting nanowire single-photon detectors (SNSPDs) are the current leading technology for the detection of single-photons in the near-infrared (NIR) and short-wave infrared (SWIR) spectral regions, due to record performance in terms of detection efficiency, low dark count rate, minimal timing jitter, and high maximum count rates. The various geometry and design parameters of SNSPDs are often carefully tailored to specific applications, resulting in challenges in optimising each performance characteristic without adversely impacting others. In particular, when scaling to larger array formats, the key challenge is to manage the heat load generated by the many readout cables in the cryogenic cooling system. Here we demonstrate a practical, self-contained 64-pixel SNSPD array system which exhibits high performance of all operational parameters, for use in the strategically important SWIR spectral region. The detector is an 8x8 array of 27.5 x 27.8 μm pixels on a 30 μm pitch, which leads to an 80 -- 85% fill factor. At a wavelength of 1550nm, a uniform average per-pixel photon detection efficiency of 77.7% was measured and the observed system detection efficiency (SDE) across the entire array was 65%. A full performance characterisation is presented, including a dark count rate of 20 cps per pixel, full-width-half-maximum (FWHM) jitter of 100 ps per pixel, a 3-dB maximum count rate of 645 Mcps and no evidence of crosstalk at the 0.1% level. This camera system therefore facilitates a variety of picosecond time-resolved measurement-based applications that include biomedical imaging, quantum communications, and long-range single-photon light detection and ranging (LiDAR) and 3D imaging.

quant-ph↗

arXiv2024

An SNSPD-based detector system for NASA's Deep Space Optical Communications project

We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diameter active area and embedded in an optical stack. The detector system also includes cryogenic optics for filtering and focusing the downlink signal and electronics for biasing the array and amplifying the output pulses. The detector system exhibits a peak system detection efficiency of 76% at 1550 nm, a background-limited false count rate as low as 3.7 kcps across the array, timing jitter less than 120 ps FWHM, and a maximum count rate of ~ 1 Gcps.

physics.ins-det↗

arXiv2024

Improvements of readout signal integrity in mid-infrared superconducting nanowire single photon detectors

Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal as the critical currents become increasingly smaller. We overcome this trade-off with a new device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and getting close to saturation at 10.6 μm. This work provides a novel platform for pushing SNSPD sensitivity to longer wavelengths while improving the scalability of the readout electronics.

physics.ins-det↗

arXiv2023

Low-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 $μ$m

We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low noise and high timing resolution photon counting detection, effectively providing a new class of single-photon sensitive detector for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing and direct dark-matter detection.

quant-ph↗

arXiv2023

Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared

Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experiments. We present 8-pixel $1 mm^2$ superconducting microwire single photon detectors (SMSPDs) with $1\,\mathrm{μm}$-wide wires fabricated from WSi and MoSi films of various stoichiometries using electron-beam and optical lithography. Devices made from all materials and fabrication techniques show saturated internal detection efficiency at 1064 nm in at least one pixel, and the best performing device made from silicon-rich WSi shows single-photon sensitivity in all 8 pixels and saturated internal detection efficiency in 6/8 pixels. This detector is the largest reported active-area SMSPD or SNSPD with near-IR sensitivity published to date, and the first report of an SMSPD array. By further optimizing the photolithography techniques presented in this work, a viable pathway exists to realize larger devices with $cm^2$-scale active area and beyond.

physics.ins-det↗

arXiv2022

High-speed detection of 1550 nm single photons with superconducting nanowire detectors

Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-counts/s at 3 dB compression. The PEACOQ detector (Performance-Enhanced Array for Counting Optical Quanta) comprises a linear array of 32 straight superconducting niobium nitride nanowires which span the mode of an optical fiber. This design supports high count rates with minimal penalties for detection efficiency and timing jitter. We show how these trade-offs can be mitigated by implementing independent read-out for each nanowire and by using a temporal walk correction technique to reduce count-rate dependent timing jitter. These detectors make quantum communication practical on a 10 GHz clock.

quant-ph↗

arXiv2022

Picosecond Synchronization of Photon Pairs through a Fiber Link between Fermilab and Argonne National Laboratories

We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-to-accidental ratio (CAR) of the C-band pairs from 51 $\pm$ 2 to 5.3 $\pm$ 0.4 due to Raman scattering of the O-band clock pulses. Despite this reduction, the CAR is nevertheless suitable for quantum networks.

quant-ph↗

arXiv2022

Picosecond synchronization system for quantum networks

The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks.

quant-ph↗

arXiv2021

The thermally-coupled imager: A scalable readout architecture for superconducting nanowire single photon detectors

Although superconducting nanowire single-photon detectors (SNSPDs) are a promising technology for quantum optics, metrology, and astronomy, they currently lack a readout architecture that is scalable to the megapixel regime and beyond. In this work, we have designed and demonstrated such an architecture for SNSPDs, called the thermally-coupled imager (TCI). The TCI uses a combination of time-of-flight delay lines and thermal coupling to create a scalable architecture that can scale to large array sizes, allows neighboring detectors to operate independently, and requires only four microwave readout lines to operate no matter the size of the array. We give an overview of how the architecture functions, and demonstrate a proof-of-concept $32\times32$ imaging array. The array was able to image a free-space focused spot at 373 nm, count at 9.6 Mcps, and resolve photon location with greater than 99.83\% distinguishability.

cond-mat.supr-con↗

arXiv2021

Impedance-matched differential superconducting nanowire detectors

Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications.

physics.app-ph↗

arXiv2020

Teleportation Systems Towards a Quantum Internet

Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of >=90% that are consistent with an analytical model of our system, which includes realistic imperfections. To demonstrate the compatibility of our setup with deployed quantum networks, we teleport qubits over 22 km of single-mode fiber while transmitting qubits over an additional 22 km of fiber. Our systems, which are compatible with emerging solid-state quantum devices, provide a realistic foundation for a high-fidelity quantum internet with practical devices.

quant-ph↗

arXiv2020

Demonstration of a Thermally-Coupled Row-Column SNSPD Imaging Array

While single-pixel superconducting nanowire single photon detectors (SNSPDs) have demonstrated remarkable efficiency and timing performance from the UV to near-IR, scaling these devices to large imaging arrays remains challenging. Here, we propose a new SNSPD multiplexing system using thermal coupling and detection correlations between two photosensitive layers of an array. Using this architecture with the channels of one layer oriented in rows and the second layer in columns, we demonstrate imaging capability in 16-pixel arrays with accurate spot tracking at the few photon level. We also explore the performance tradeoffs of orienting the top layer nanowires parallel and perpendicular to the bottom layer. The thermally-coupled row-column scheme is readily able to scale to the kilopixel size with existing readout systems, and when combined with other multiplexing architectures, has the potential to enable megapixel scale SNSPD imaging arrays.

physics.ins-det↗

arXiv2018

Superconducting nanowire single-photon detector with integrated impedance-matching taper

Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where $Z_\mathrm{load}$ is limited to 50 $Ω$ in standard r.f. electronics. Here, we break this limit by interfacing the 50 $Ω$ load and the SNSPD using an integrated superconducting transmission line taper. The taper is a transformer that effectively loads the SNSPD with high impedance without latching. It increases the amplitude of the detector output while preserving the fast rising edge. Using a taper with a starting width of 500 nm, we experimentally observed a 3.6$\times$ higher pulse amplitude, 3.7$\times$ faster slew rate, and 25.1 ps smaller timing jitter. The results match our numerical simulation, which incorporates both the hotspot dynamics in the SNSPD and the distributed nature in the transmission line taper. The taper studied here may become a useful tool to interface high-impedance superconducting nanowire devices to conventional low-impedance circuits.

physics.ins-det↗

arXiv2018

Intrinsic timing jitter and latency in superconducting single photon nanowire detectors

We analyze the origin of the intrinsic timing jitter in superconducting nanowire single photon detectors (SNSPDs) in terms of fluctuations in the latency of the detector response, which is determined by the microscopic physics of the photon detection process. We demonstrate that fluctuations in the physical parameters which determine the latency give rise to the intrinsic timing jitter. We develop a general description of latency by introducing the explicit time dependence of the internal detection efficiency. By considering the dynamic Fano fluctuations together with static spatial inhomogeneities, we study the details of the connection between latency and timing jitter. We develop both a simple phenomenological model and a more general microscopic model of detector latency and timing jitter based on the solution of the generalized time-dependent Ginzburg-Landau equations for the 1D hotbelt geometry. While the analytical model is sufficient for qualitative interpretation of recent data, the general approach establishes the framework for a quantitative analysis of detector latency and the fundamental limits of intrinsic timing jitter. These theoretical advances can be used to interpret the results of recent experiments measuring the dependence of detection latency and timing jitter on photon energy to the few-picosecond level.

physics.ins-det↗

arXiv2017

UV superconducting nanowire single-photon detectors with high efficiency, low noise, and 4 K operating temperature

For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for wavelengths below 400 nm. Here, we describe the design, fabrication, and characterization of UV SNSPDs operating at wavelengths between 250 and 370 nm. The detectors have active areas up to 56 $μ$m in diameter, 70 - 80% efficiency, timing resolution down to 60 ps FWHM, blindness to visible and infrared photons, and dark count rates of ~ 0.25 counts/hr for a 56 $μ$m diameter pixel. By using the amorphous superconductor MoSi, these UV SNSPDs are also able to operate at temperatures up to 4.2 K. These performance metrics make UV SNSPDs ideal for applications in trapped-ion quantum information processing, lidar studies of the upper atmosphere, UV fluorescent-lifetime imaging microscopy, and photon-starved UV astronomy.

physics.ins-det↗