Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2501.07357

High-efficiency, high-count-rate 2D superconducting nanowire single-photon detector array

Fiona Fleming·Will McCutcheon·Emma E. Wollman·Andrew D. Beyer·Vikas Anant·Boris Korzh·Jason P. Allmaras·Lautaro Narváez·Saroch Leedumrongwatthanakun·Gerald S. Buller·Mehul Malik·Matthew D. Shaw
View original source ↗Read source document ↗Export metadata ↓

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) are the current leading technology for the detection of single-photons in the near-infrared (NIR) and short-wave infrared (SWIR) spectral regions, due to record performance in terms of detection efficiency, low dark count rate, minimal timing jitter, and high maximum count rates. The various geometry and design parameters of SNSPDs are often carefully tailored to specific applications, resulting in challenges in optimising each performance characteristic without adversely impacting others. In particular, when scaling to larger array formats, the key challenge is to manage the heat load generated by the many readout cables in the cryogenic cooling system. Here we demonstrate a practical, self-contained 64-pixel SNSPD array system which exhibits high performance of all operational parameters, for use in the strategically important SWIR spectral region. The detector is an 8x8 array of 27.5 x 27.8 {\mu}m pixels on a 30 {\mu}m pitch, which leads to an 80 -- 85% fill factor. At a wavelength of 1550nm, a uniform average per-pixel photon detection efficiency of 77.7% was measured and the observed system detection efficiency (SDE) across the entire array was 65%. A full performance characterisation is presented, including a dark count rate of 20 cps per pixel, full-width-half-maximum (FWHM) jitter of 100 ps per pixel, a 3-dB maximum count rate of 645 Mcps and no evidence of crosstalk at the 0.1% level. This camera system therefore facilitates a variety of picosecond time-resolved measurement-based applications that include biomedical imaging, quantum communications, and long-range single-photon light detection and ranging (LiDAR) and 3D imaging.

Explore related subjects

quant-phphysics.ins-detphysics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fiona Fleming, Will McCutcheon, Emma E. Wollman, Andrew D. Beyer, Vikas Anant, Boris Korzh, Jason P. Allmaras, Lautaro Narváez, Saroch Leedumrongwatthanakun, Gerald S. Buller, Mehul Malik, Matthew D. Shaw. 2025-01-13. High-efficiency, high-count-rate 2D superconducting nanowire single-photon detector array. https://arxiv.org/abs/2501.07357

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Probing the Error-Mitigation Threshold with Matrix Product States

Quantum error mitigation relies on accurate noise characterization, but mismatches between the actual and characterized noise can be amplified and drive a sharp threshold between successful and failed mitigation. In random circuits, this threshold maps onto a random-field Ising transition, but previous exact numerics were limited to small one-dimensional and all-to-all systems, leaving explicit two-dimensional architectures unresolved. We develop a fixed-bond-dimension matrix-product-state method for the replicated transfer dynamics that extends threshold calculations beyond exact propagation while retaining the finite-size signatures of the transition. At system sizes beyond previous exact studies, we recover the predicted absence of a threshold for quenched disorder in 1D, obtain a sharper annealed all-to-all critical point, and resolve architecture-dependent finite-depth thresholds in 2D square and heavy-hex circuits. These results establish replicated tensor-network dynamics as a practical tool for probing error-mitigation thresholds in large and higher-dimensional noisy circuits.

quant-ph↗
arXiv2026

Low-cost algorithm-to-execution framework for surface-code quantum computing

The execution of useful quantum algorithms on fault-tolerant processors requires more than a mapping from logical gates to encoded operations: the spatial organization, non-Clifford resource supply, and execution schedule must also be determined while keeping physical overhead within practical limits. Although the theoretical hierarchy from logical circuits to fault-tolerant operations is well established, these implementation choices are often specified and optimized separately. Here we develop a low-cost algorithm-to-execution framework for surface-code quantum computing. From hierarchical algorithm descriptions, it constructs dependency-preserving logical schedules and an executable workload capturing logical interactions, operation parallelism, and time-resolved non-Clifford demand, thereby linking logical computation to surface-code organization, resource-state preparation, and fault-tolerant execution in a traceable workflow. We apply the framework to twenty benchmark circuits across seven algorithm families and a hierarchically composed application-scale elliptic-curve discrete-logarithm workload. Physical costs vary substantially even for circuits with similar logical resource counts. Under our direct-rotation calibration, non-Clifford implementation selection reduces space-time volume by up to 241.5 times versus an all-synthesis baseline for the QAOA amplitude-amplification workload. Circuit-specific surface-code layouts reduce routed-latency estimates for all twenty benchmarks; thirteen also reduce space-time volume because communication savings outweigh added spatial overhead. These results show that low-cost fault-tolerant execution depends on computation scheduling and organization, not aggregate logical resource counts alone.

quant-ph↗
arXiv2026

Sample-optimal learning of stabilizer states

It is well-known that learning a pure $n$-qubit stabilizer state $|\psi\rangle$ both requires, and can be accomplished with, access to a number of copies of $|\psi\rangle$ linear in $n$. However, the precise constant coefficient of this scaling does not appear to have been determined. Here we prove that $L_\delta(n)$, the smallest number of copies from which a quantum procedure can identify any stabilizer state with failure probability at most $0<\delta<1/8$, satisfies $n+\lceil\log_2(1/\delta)\rceil-3\leq L_\delta(n)\leq n+\left\lceil\log_2(1/\delta)\right\rceil+4$. We present a polynomial-time quantum learning algorithm that saturates this bound, achieving a constant factor improvement in sample-complexity over previously known approaches. As an immediate corollary, we obtain via the Choi-Jamiolkowski isomorphism an algorithm for learning an unknown $n$-qubit Clifford unitary from $2n+\left\lceil\log_2(1/\delta)\right\rceil+4$ queries, the $n$-dependence of which we show to be optimal. Our proof technique, which involves Fourier analysis on the abelian group $\mathbb{Z}_4^n \times \mathbb{F}_2^{n(n-1)/2}$, seems to be qualitatively different to previous approaches to stabilizer state learning, and may be of some independent interest; in particular, it admits natural generalisations to further problems in quantum learning theory.

quant-ph↗