Searcharxiv⌕ Search

arXiv subjects

Jay M. Gambetta

Publications and source records attributed to Jay M. Gambetta.

At least 73 records · Page 4Linked to original sources

Optimized pulse shapes for a resonator-induced phase gate

The resonator-induced phase gate is a multi-qubit controlled-phase gate for fixed-frequency superconducting qubits. Through off-resonant driving of a bus resonator, statically coupled qubits acquire a state-dependent phase. However, photon loss leads to dephasing during the gate, and any residual entanglement between the resonator and qubits after the gate leads to decoherence. Here we consider how to shape the drive pulse to minimize these unwanted effects. First, we review how the gate's entangling and dephasing rates depend on the system parameters and validate closed-form solutions against direct numerical solution of a master equation. Next, we propose spline pulse shapes that reduce residual qubit-bus entanglement, are robust to imprecise knowledge of the resonator shift, and can be shortened by using higher-degree polynomials. Finally, we present a procedure that optimizes over the subspace of pulses that leave the resonator unpopulated. This finds shaped drive pulses that further reduce the gate duration. Assuming realistic parameters, we exhibit shaped pulses that have the potential to realize ~212 ns spline pulse gates and ~120 ns optimized gates with ~6e-4 average gate infidelity. These examples do not represent fundamental limits of the gate and in principle even shorter gates may be achievable.

quant-ph↗

Machine learning for discriminating quantum measurement trajectories and improving readout

High-fidelity measurements are important for the physical implementation of quantum information protocols. Current methods for classifying measurement trajectories in superconducting qubit systems produce fidelities that are systematically lower than those predicted by experimental parameters. Here, we place current classification methods within the framework of machine learning algorithms and improve on them by investigating more sophisticated ML approaches. We find that non-linear algorithms and clustering methods produce significantly higher assignment fidelities that help close the gap to the fidelity achievable under ideal noise conditions. Clustering methods group trajectories into natural subsets within the data, which allows for the diagnosis of specific systematic errors. We find large clusters in the data associated with relaxation processes and show these are the main source of discrepancy between our experimental and achievable fidelities. These error diagnosis techniques help provide a concrete path forward to improve qubit measurements.

quant-ph↗

Leakage Suppression in the Toric Code

Quantum codes excel at correcting local noise but fail to correct leakage faults that excite qubits to states outside the computational space. Aliferis and Terhal have shown that an accuracy threshold exists for leakage faults using gadgets called leakage reduction units (LRUs). However, these gadgets reduce the accuracy threshold and can increase overhead and experimental complexity, and these costs have not been thoroughly understood. Our work explores a variety of techniques for leakage-resilient, fault-tolerant error correction in the context of topological codes. Our contributions are threefold. First, we develop a leakage model that differs in critical details from earlier models. Second, we use Monte-Carlo simulations to survey several syndrome extraction circuits. Third, given the capability to perform three-outcome measurements, we present a dramatically improved syndrome processing algorithm. Our simulation results show that simple circuits with one extra CNOT per qubit and no additional ancillas reduce the accuracy threshold by less than a factor of 4 when leakage and depolarizing noise rates are comparable. This becomes a factor of 2 when the decoder uses 3-outcome measurements. Finally, when the physical error rate is less than 2 x 10^-4, placing LRUs after every gate may achieve the lowest logical error rates of all of the circuits we considered. We expect the closely related planar and rotated codes to exhibit the same accuracy thresholds and that the ideas may generalize naturally to other topological codes.

quant-ph↗

Detecting arbitrary quantum errors via stabilizer measurements on a sublattice of the surface code

To build a fault-tolerant quantum computer, it is necessary to implement a quantum error correcting code. Such codes rely on the ability to extract information about the quantum error syndrome while not destroying the quantum information encoded in the system. Stabilizer codes are attractive solutions to this problem, as they are analogous to classical linear codes, have simple and easily computed encoding networks, and allow efficient syndrome extraction. In these codes, syndrome extraction is performed via multi-qubit stabilizer measurements, which are bit and phase parity checks up to local operations. Previously, stabilizer codes have been realized in nuclei, trapped-ions, and superconducting qubits. However these implementations lack the ability to perform fault-tolerant syndrome extraction which continues to be a challenge for all physical quantum computing systems. Here we experimentally demonstrate a key step towards this problem by using a two-by-two lattice of superconducting qubits to perform syndrome extraction and arbitrary error detection via simultaneous quantum non-demolition stabilizer measurements. This lattice represents a primitive tile for the surface code, which is a promising stabilizer code for scalable quantum computing. Furthermore, we successfully show the preservation of an entangled state in the presence of an arbitrary applied error through high-fidelity syndrome measurement. Our results bolster the promise of employing lattices of superconducting qubits for larger-scale fault-tolerant quantum computing.

quant-ph↗

Purcell effect with microwave drive: Suppression of qubit relaxation rate

We analyze the Purcell relaxation rate of a superconducting qubit coupled to a resonator, which is coupled to a transmission line and pumped by an external microwave drive. Considering the typical regime of the qubit measurement, we focus on the case when the qubit frequency is significantly detuned from the resonator frequency. Surprisingly, the Purcell rate decreases when the strength of the microwave drive is increased. This suppression becomes significant in the nonlinear regime. In the presence of the microwave drive, the loss of photons to the transmission line also causes excitation of the qubit; however, the excitation rate is typically much smaller than the relaxation rate. Our analysis also applies to a more general case of a two-level quantum system coupled to a cavity.

quant-ph↗

Efficient measurement of quantum gate error by interleaved randomized benchmarking

We describe a scalable experimental protocol for obtaining estimates of the error rate of individual quantum computational gates. This protocol, in which random Clifford gates are interleaved between a gate of interest, provides a bounded estimate of the average error of the gate under test so long as the average variation of the noise affecting the full set of Clifford gates is small. This technique takes into account both state preparation and measurement errors and is scalable in the number of qubits. We apply this protocol to a superconducting qubit system and find gate errors that compare favorably with the gate errors extracted via quantum process tomography.

quant-ph↗

Tomography via Correlation of Noisy Measurement Records

We present methods and results of shot-by-shot correlation of noisy measurements to extract entangled state and process tomography in a superconducting qubit architecture. We show that averaging continuous values, rather than counting discrete thresholded values, is a valid tomographic strategy and is in fact the better choice in the low signal-to-noise regime. We show that the effort to measure $N$-body correlations from individual measurements scales exponentially with $N$, but with sufficient signal-to-noise the approach remains viable for few-body correlations. We provide a new protocol to optimally account for the transient behavior of pulsed measurements. Despite single-shot measurement fidelity that is less than perfect, we demonstrate appropriate processing to extract and verify entangled states and processes.

quant-ph↗

Implementing a strand of a scalable fault-tolerant quantum computing fabric

Quantum error correction (QEC) is an essential step towards realising scalable quantum computers. Theoretically, it is possible to achieve arbitrarily long protection of quantum information from corruption due to decoherence or imperfect controls, so long as the error rate is below a threshold value. The two-dimensional surface code (SC) is a fault-tolerant error correction protocol} that has garnered considerable attention for actual physical implementations, due to relatively high error thresholds ~1%, and restriction to planar lattices with nearest-neighbour interactions. Here we show a necessary element for SC error correction: high-fidelity parity detection of two code qubits via measurement of a third syndrome qubit. The experiment is performed on a sub-section of the SC lattice with three superconducting transmon qubits, in which two independent outer code qubits are joined to a central syndrome qubit via two linking bus resonators. With all-microwave high-fidelity single- and two-qubit nearest-neighbour entangling gates, we demonstrate entanglement distributed across the entire sub-section by generating a three-qubit Greenberger-Horne-Zeilinger (GHZ) state with fidelity ~94%. Then, via high-fidelity measurement of the syndrome qubit, we deterministically entangle the otherwise un-coupled outer code qubits, in either an even or odd parity Bell state, conditioned on the syndrome state. Finally, to fully characterize this parity readout, we develop a new measurement tomography protocol to obtain a fidelity metric (90% and 91%). Our results reveal a straightforward path for expanding superconducting circuits towards larger networks for the SC and eventually a primitive logical qubit implementation.

quant-ph↗

Time-Reversal Symmetrization of Spontaneous Emission for High Fidelity Quantum State Transfer

We demonstrate the ability to control the spontaneous emission from a superconducting qubit coupled to a cavity. The time domain profile of the emitted photon is shaped into a symmetric truncated exponential. The experiment is enabled by a qubit coupled to a cavity, with a coupling strength that can be tuned in tens of nanoseconds while maintaining a constant dressed state emission frequency. Symmetrization of the photonic wave packet will enable use of photons as flying qubits for transfering the quantum state between atoms in distant cavities.

quant-ph↗

Investigating the limits of randomized benchmarking protocols

In this paper, we analyze the performance of randomized benchmarking protocols on gate sets under a variety of realistic error models that include systematic rotations, amplitude damping, leakage to higher levels, and 1/f noise. We find that, in almost all cases, benchmarking provides better than a factor-of-two estimate of average error rate, suggesting that randomized benchmarking protocols are a valuable tool for verification and validation of quantum operations. In addition, we derive new models for fidelity decay curves under certain types of non-Markovian noise models such as 1/f and leakage errors. We also show that, provided the standard error of the fidelity measurements is small, only a small number of trials are required for high confidence estimation of gate errors.

quant-ph↗

Microwave-activated conditional-phase gate for superconducting qubits

We introduce a new entangling gate between two fixed-frequency qubits statically coupled via a microwave resonator bus which combines the following desirable qualities: all-microwave control, appreciable qubit separation for reduction of crosstalk and leakage errors, and the ability to function as a two-qubit conditional-phase gate. A fixed, always-on interaction is explicitly designed between higher energy (non-computational) states of two transmon qubits, and then a conditional-phase gate is `activated' on the otherwise unperturbed qubit subspace via a microwave drive. We implement this microwave-activated conditional-phase gate with a fidelity from quantum process tomography of 87%.

quant-ph↗

Improved superconducting qubit coherence using titanium nitride

We demonstrate enhanced relaxation and dephasing times of transmon qubits, up to ~ 60 μs by fabricating the interdigitated shunting capacitors using titanium nitride (TiN). Compared to lift-off aluminum deposited simultaneously with the Josephson junction, this represents as much as a six-fold improvement and provides evidence that previous planar transmon coherence times are limited by surface losses from two-level system (TLS) defects residing at or near interfaces. Concurrently, we observe an anomalous temperature dependent frequency shift of TiN resonators which is inconsistent with the predicted TLS model.

quant-ph↗

Characterization of addressability by simultaneous randomized benchmarking

The control and handling of errors arising from cross-talk and unwanted interactions in multi-qubit systems is an important issue in quantum information processing architectures. We introduce a benchmarking protocol that provides information about the amount of addressability present in the system and implement it on coupled superconducting qubits. The protocol consists of randomized benchmarking each qubit individually and then simultaneously, and the amount of addressability is related to the difference of the average gate fidelities of those experiments. We present the results on two similar samples with different amounts of cross-talk and unwanted interactions, which agree with predictions based on simple models for the amount of residual coupling.

quant-ph↗

Entanglement of two superconducting qubits in a waveguide cavity via monochromatic two-photon excitation

We report a system where fixed interactions between non-computational levels make bright the otherwise forbidden two-photon 00 --> 11 transition. The system is formed by hand selection and assembly of two discrete component transmon-style superconducting qubits inside a rectangular microwave cavity. The application of a monochromatic drive tuned to this transition induces two-photon Rabi-like oscillations between the ground and doubly-excited states via the Bell basis. The system therefore allows all-microwave two-qubit universal control with the same techniques and hardware required for single qubit control. We report Ramsey-like and spin echo sequences with the generated Bell states, and measure a two-qubit gate fidelity of 90% (unconstrained) and 86% (maximum likelihood estimator).

quant-ph↗

Process verification of two-qubit quantum gates by randomized benchmarking

We implement a complete randomized benchmarking protocol on a system of two superconducting qubits. The protocol consists of randomizing over gates in the Clifford group, which experimentally are generated via an improved two-qubit cross-resonance gate implementation and single-qubit unitaries. From this we extract an optimal average error per Clifford of 0.0936. We also perform an interleaved experiment, alternating our optimal two-qubit gate with random two-qubit Clifford gates, to obtain a two-qubit gate error of 0.0653. We compare these values with a two-qubit gate error of ~0.12 obtained from quantum process tomography, which is likely limited by state preparation and measurement errors.

quant-ph↗

Self-Consistent Quantum Process Tomography

Quantum process tomography is a necessary tool for verifying quantum gates and diagnosing faults in architectures and gate design. We show that the standard approach of process tomography is grossly inaccurate in the case where the states and measurement operators used to interrogate the system are generated by gates that have some systematic error, a situation all but unavoidable in any practical setting. These errors in tomography can not be fully corrected through oversampling or by performing a larger set of experiments. We present an alternative method for tomography to reconstruct an entire library of gates in a self-consistent manner. The essential ingredient is to define a likelihood function that assumes nothing about the gates used for preparation and measurement. In order to make the resulting optimization tractable we linearize about the target, a reasonable approximation when benchmarking a quantum computer as opposed to probing a black-box function.

quant-ph↗

Josephson junction-embedded transmission-line resonators: from Kerr medium to in-line transmon

We provide a general method to find the Hamiltonian of a linear circuit in the presence of a nonlinearity. Focussing on the case of a Josephson junction embedded in a transmission-line resonator, we solve for the normal modes of the system by taking into account exactly the effect of the quadratic (i.e. inductive) part of the Josephson potential. The nonlinearity is then found to lead to self and cross-Kerr effect, as well as beam-splitter type interactions between modes. By adjusting the parameters of the circuit, the Kerr coefficient K can be made to reach values that are weak (K < κ), strong (K > κ) or even very strong (K >> κ) with respect to the photon-loss rate κ. In the latter case, the resonator+junction circuit corresponds to an in-line version of the transmon. By replacing the single junction by a SQUID, the Kerr coefficient can be tuned in-situ, allowing for example the fast generation of Schrödinger cat states of microwave light. Finally, we explore the maximal strength of qubit-resonator coupling that can be reached in this setting.

quant-ph↗

Characterizing Quantum Gates via Randomized Benchmarking

We describe and expand upon the scalable randomized benchmarking protocol proposed in Phys. Rev. Lett. 106, 180504 (2011) which provides a method for benchmarking quantum gates and estimating the gate-dependence of the noise. The protocol allows the noise to have weak time and gate-dependence, and we provide a sufficient condition for the applicability of the protocol in terms of the average variation of the noise. We discuss how state preparation and measurement errors are taken into account and provide a complete proof of the scalability of the protocol. We establish a connection in special cases between the error rate provided by this protocol and the error strength measured using the diamond norm distance.

quant-ph↗