arXiv subjects

Jean-François Berret

Publications and source records attributed to Jean-François Berret.

At least 37 records · Page 2Linked to original sources

arXiv2021

Magnetic wire active microrheology of human respiratory mucus

Mucus is a viscoelastic gel secreted by the pulmonary epithelium in the tracheobronchial region of the lungs. The coordinated beating of cilia moves mucus upwards towards pharynx, removing inhaled pathogens and particles from the airways. The efficacy of this clearance mechanism depends primarily on the rheological properties of mucus. Here we use magnetic wire based microrheology to study the viscoelastic properties of human mucus collected from human bronchus tubes. The response of wires between 5 and 80 microns in length to a rotating magnetic field is monitored by optical time-lapse microscopy and analyzed using constitutive equations of rheology, including those of Maxwell and Kelvin-Voigt. The static shear viscosity and elastic modulus can be inferred from low frequency (from 0.003 to 30 rad s-1) measurements, leading to the evaluation of the mucin network relaxation time. This relaxation time is found to be widely distributed, from one to several hundred seconds. Mucus is identified as a viscoelastic liquid with an elastic modulus of 2.5 +/- 0.5 Pa and a static viscosity of 100 +/- 40 Pa s. Our work shows that beyond the established spatial variations in rheological properties due to microcavities, mucus exhibits secondary inhomogeneities associated with the relaxation time of the mucin network that may be important for its flow properties.

cond-mat.soft↗

arXiv2021

Cellulose nanocrystals mimicking micron sized fibers to assess the deposition of latex particles on cotton

We report the interactions of cationic latex particles synthesized by RAFT/MADIX-mediated emulsion polymerization with anionic cellulose nanocrystals (CNCs) and cotton fabrics. Latexes in the size range 200-300 nm with poly(butyl acrylate) or poly(2-ethylhexyl acrylate) hydropho-bic cores and hydrophilic shell are synthesized. We show that the latex/CNC interaction is me-diated by electrostatics, the interaction being the strongest with the most charged particles. The adsorption process is efficient and does not require any functionalization step for either cellulose or latex. A major result is the observation by cryogenic transmission electron micros-copy of latexes coated with entangled arrays of CNCs, and for the softer particles a notable deformation of their structure into faceted polyhedra. By labeling the latexes with hydrophobic carbocyanine dyes, their deposition on woven cotton fabrics is studied in situ and quantified by fluorescence microscopy. As with the CNCs, the highest deposition on cotton in the wet and dried states is achieved with the most charged latexes. This demonstrates that CNCs can serve as models to adjust the interactions of latex particles with cotton, and thus optimize manufac-turing processes for the development of advanced textiles.

cond-mat.mtrl-sci↗

arXiv2021

Antioxidant activity and toxicity study of cerium oxide nanoparticles stabilized with innovative functional copolymers

Oxidative stress, which is one of the main harmful mechanisms of pathologies including is-chemic stroke, contributes to both neurons and endothelial cell damages, leading to vascular lesions. Although many antioxidants have been tested in preclinical studies, no treatment is currently available for stroke patients. Since cerium oxide nanoparticles (CNPs) exhibit remarkable antioxidant capacities, our objective is to develop an innovative coating to enhance CNPs biocompatibility without disrupting their antioxidant capacities or enhance their toxicity. This study reports the synthesis and characterization of functional polymers and their impact on the enzyme-like catalytic activity of CNPs. To study the toxicity and the antioxidant properties of CNPs for stroke and particularly endothelial damages, in vitro studies are conducted on a cerebral endothelial cell line (bEnd.3). Despite their internalization in bEnd.3 cells, coated CNPs are devoid of cytotoxicity. Microscopy studies report an intracellular localization of CNPs, more precisely in endosomes. All CNPs reduces glutamate-induced intracellular production of ROS in endothelial cells but one CNP significantly reduces both the production of mitochondrial super-oxide anion and DNA oxidation. In vivo studies report a lack of toxicity in mice. This study there-fore describes and identifies biocompatible CNPs with interesting antioxidant properties for ischemic stroke and related pathologies.

cond-mat.mtrl-sci↗

arXiv2020

Adsorption of a fabric conditioner on cellulose nanocrystals: Synergistic effects of surfactant vesicles and polysaccharides on softness properties

Concentrated fabric conditioners are water-based formulations containing 10 wt. % of cationic surfactants that are deposited on textile fibers during the rinse cycle in a washing machine to make them smoother and softer to touch. In topical formulations, the concentration of cationic surfactants is reduced by half, this reduction being compensated by the addition of environment-friendly polysaccharides. Using atomic force microscopy (AFM), quartz crystal microbalance with dissipation (QCM-D) and ellipsometry, the deposition of formulations with or without polysaccharides on model cellulose substrates is studied. We found that 180 nm long cellulose nanocrystals (CNCs) deposited by spin-coating on amorphous silicon dioxide or on quartz crystal sensors provide a good model of cellulose surfaces. QCM-D results reveal strong electrostatic interactions of the surfactant vesicles and polysaccharides with the CNC layer. In the presence of polysaccharides, the adsorbed quantities are less (by 60%) than the sum of the respective amounts of each component, the structure of the interface being however more homogenous and rigid. This outcome suggests that surface techniques coupled with CNC coated substrates are promising for studying interactions of current formulations with cellulose surfaces.

cond-mat.soft↗

arXiv2020

Template-Free Preparation of Thermoresponsive Mag-netic Cilia Compatible with Biological Conditions

Bio-inspired materials are commonly used in the development of functional devices. The fabrication of artificial cilia mimicking the biological functions has emerged as a promising strategy for fluid manipulation in miniaturized systems. In this study, we propose a different physicochemical insight for the preparation of magnetic cilia based on the temperature-triggered reversible assembly of coated iron oxide nanoparticles in a bio-compatible template-free approach. The length of the prepared cilia could be tuned between 10 and 100 microns reaching aspect ratios up to 100 in a very dense array of flexible structures with persistence lengths around 8 microns. Magnetic actuation of the cilia revealed robust structures (over several hours of actuation) with a wide range of bending amplitudes resulting from high susceptibility of the filaments. The results demonstrate that the proposed strategy is an efficient and versatile alternative for templated fabrication methods and producing cilia with remarkable characteristics and dimensions within the template-free approaches.

cond-mat.soft↗

arXiv2020

A mathematical finance approach to the stochastic and intermittent viscosity fluctuations in living cells

Here we report on the viscosity of eukaryotic living cells as a function of the time, and on the application of stochastic models to analyze its temporal fluctuations. The viscoelastic properties of NIH/3T3 fibroblastic cells are investigated using an active microrheological technique, where magnetic wires, embedded into cells, are being actuated remotely. The data reveal anomalous transient responses characterized by intermittent phases of slow and fast rotation, revealing significant fluctuations. The time dependent viscosity is analyzed from a time series perspective by computing the autocorrelation functions and the variograms, two functions used to describe stochastic processes in mathematical finance. The resulting analysis gives evidence of a sub-diffusive mean-reverting process characterized by an autoregressive coefficient lower than 1. It also shows the existence of specific cellular times in the ranges 1 - 10 s and 100 - 200 s, not previously disclosed. The shorter time is found being related to the internal relaxation time of the cytoplasm. To our knowledge, this is the first time that similarities are established between the properties of time series describing the intracellular metabolism and statistical results from mathematical finance. The current approach could be exploited to reveal hidden features from biological complex systems, or determine new biomarkers of cellular metabolism.

cond-mat.soft↗

arXiv2020

Effect of pH on the complex coacervation and on the formation of layers of sodium alginate and PDADMAC

In this study, we investigated the thermodynamic features of a system based on oppositely charged polyelectrolytes, sodium alginate, and poly(diallyldimethylammonium chloride) (PDADMAC) at different pH values. Additionally, a comparison of the effects of the thermodynamic parameters on the growth of the layers based on the same polymers is presented. For this investigation, different techniques were combined to compare results from the association in solution and co-assembled layers at the silicon surface. Dynamic light scattering (DLS) and isothermal titration calorimetry (ITC) were used for studies in solution, and the layer-by-layer technique was employed for the preparation of the polymer layers. Ellipsometry and atomic force microscopy (AFM) were used to characterize the layer thickness growth as a function of the solution pH, and interferometric confocal microscopy was employed to analyze the topography and roughness of the films. The layers grown for the PDADMAC/sodium alginate system demonstrated pH sensitivity with either linear or exponential behavior, depending on the pH values of the polyelectrolyte solutions. The layer thicknesses measured using ellipsometry and AFM data were in good agreement. Additionally, a pH influence on the roughness and topography of the films was observed. Films from basic dipping solutions resulted in surfaces that were more homogeneous with less roughness; in contrast, films with more layers and those formed in a low-pH dipping solution were rougher and less homogeneous.

cond-mat.soft↗

arXiv2020

Revealing the Pulmonary Surfactant Corona on Silica Nano-particles by Cryo-Transmission Electron Microscopy

When inhaled nanoparticles (NPs) deposit in alveoli, they transit through the pulmonary surfactant (PS), a biofluid made of proteins and phospholipidic vesicles. They acquire a corona reflecting the PS-nanomaterials interaction. Since the corona determines directly the NPs biological fate, the question of its nature and structure is central. Here, we report on the corona architecture raising after incubation of positive or negative silica particles with Curosurf, a biomimetic pulmonary surfactant of porcine origin. Using optical, electron and cryo-electron microscopy (cryo-TEM), we determine the pulmonary surfactant corona structure at different scales of observation. Contrary to common belief, the PS corona is not only constituted by phospholipidic bilayers surrounding NPs but by multiple hybrid structures derived from NPs-vesicles interaction. Statistical analysis of cryo-TEM images provides interesting highlights about the nature of the corona depending on the particle charge. The influence of Curosurf pre- or post-treatment is also investigated and demonstrate the need of protocols standardization.

cond-mat.soft↗

arXiv2019

Design and applications of a fluorescent labeling technique for lipid and surfactant preformed vesicles

Amphiphilic molecules such as surfactants, lipids and block copolymers can be assembled into bilayers and form vesicles. Fluorescent membrane labeling methods require the use of dye molecules that can be inserted in the bilayers at different stages of the synthesis. To our knowledge there is no generalized method for labeling preformed vesicles. Herein we develop a versatile protocol that is suitable to both surfactant and lipid preformed vesicles and requires no separation or purification steps. Based on the lipophilic carbocyanine green dye PKH67, the methodology is assessed on zwitterionic phosphatidylcholine vesicles. To demonstrate its versatility, it is applied to dispersions of anionic or cationic vesicles, such as a drug administrated to premature infants with respiratory distress syndrome, or a vesicle formulation used as a fabric softener for homecare applications. By means of fluorescence microscopy we then visualize the interaction mechanisms of nanoparticles crossing live cell membranes and of surfactant adsorbing on cotton fabric. These results highlight the advantages of a membrane labeling technique that is simple and applicable to a large number of soft matter systems.

cond-mat.soft↗

arXiv2019

A health concern regarding the protein corona, aggregation and disaggregation

Nanoparticle (NP)-protein complexes exhibit the correct identity of NP in biological media. Therefore, protein-NP interactions should be closely explored to understand and to modulate the nature of NPs in medical implementations. This review focuses mainly on the physicochemical parameters such as dimension, surface chemistry, the morphology of NPs and influence of medium pH on the formation of protein corona and conformational changes of adsorbed proteins by different kinds of methods. Also, the impact of protein corona on the colloidal stability of NPs is discussed. Uncontrolled protein attachment on NPs may bring unwanted impacts such as protein denaturation and aggregation. In contrast, controlled protein adsorption by optimal concentration, size, pH and surface modification of NPs may result in potential implementation of NPs as therapeutic agents especially for disaggregation of amyloid fibrils. Also, the effect of NPs-protein corona on reducing the cytotoxicity and clinical implications such as drug delivery, cancer therapy, imaging and diagnosis will be discussed. Validated correlative physicochemical parameters for NP-protein corona formation frequently derived from protein corona fingerprints of NPs which are more valid than the parameters obtained only on the base of NP features. This review may provide useful information regarding the potency as well as the adverse effects of NPs to predict their behavior in the in vivo experiments.

physics.bio-ph↗

arXiv2018

Brake wear (nano)particle characterization and toxicity on airway epithelial cells in vitro

Particulate air pollution results from different sources, among which those related to road traffic have a significant impact on human health. Combustion-derived particles emitted by thermal engines have been incriminated and are now better controlled. In contrast, non-exhaust emission sources related to car wear and degradation processes are not yet regulated. Here we report on brake wear particles (BWP) harvested in two test facilities operating in France, providing samples from different braking systems and driving/testing conditions. Using a combination of light scattering, X-ray fluorescence, optical and electron microscopy, the particle size and elemental composition are revealed. The BWP are shown to be in the nano- to micrometer range and to have a low carbonaceous content (6%), iron and copper being the main components (> 40%). To evaluate the toxicity potential of its nano-sized fraction, brake wear nanoparticles are isolated by sonication, filtration and ultra-centrifugation techniques, leading to stable colloidal dispersions. A significant outcome of this study is that the nano-sized fraction represents 26% by mass of the initial BWP. Human bronchial epithelial cells (Calu-3) are used as relevant target cells to investigate their cytotoxicity. We observe a clear short-term loss of viability associated to reactive oxygen species generation, but with limited pro-inflammatory effects. On an actual cell-deposited mass-dose basis, the cytotoxicity of the nanosized fraction is similar to that of BWP, suggesting that the cytotoxicity is particle size independent. To conclude, brake wear dust contains substantial amount of metallic nanoparticles exhibiting toxicity for lung cells, and should warrant further consideration.

physics.app-ph↗

arXiv2017

Serum protein resistant behavior of multisite-bound poly(ethylene glycol) chains onto iron oxide surfaces

Recent surveys have shown that the number of nanoparticle-based formulations actually used at the clinical level is significantly lower than expected a decade ago. One reason for this is that the nanoparticle physicochemical properties fall short for handling the complexity of biological environments and for preventing nonspecific protein adsorption. In this study, we address the issue of the interactions of plasma proteins with polymer coated surfaces. To this aim, we use a non-covalent grafting-to method to functionalize iron oxide sub-10 nm nanoparticles and iron oxide flat substrates, and compare their protein responses. The functionalized copolymers consist in alternating poly(ethylene glycol) (PEG) chains and phosphonic acid grafted on the same backbone. Quartz Crystal Microbalance with dissipation was used to monitor the polymer adsorption kinetics and to evaluate the resistance to protein adsorption. On flat substrates, functionalized PEG copolymers adsorb and form a brush in the moderate or in the highly stretched regimes, with density between 0.15 and 1.5 nm-2. PEG layers using phosphonic acid as linkers exhibit excellent protein resistance. In contrast, layers prepared with carboxylic acid as grafting agent exhibit mitigated protein responses and layer destructuration. The present study establishes a correlation between the long-term stability of PEG coated particles in biofluids and the protein resistance of surfaces coated with the same polymers.

cond-mat.soft↗

arXiv2016

Microrheology of viscoelastic solutions studied by magnetic rotational spectroscopy

Magnetic rotational spectroscopy is based on the use of magnetic micron-size wires for viscosity measurements. Submitted to a rotational magnetic field with increasing frequency, the wires undergo a hydrodynamic instability between a synchronous and an asynchronous regime. From a comparison between predictions and experiments, the static shear viscosity and elastic modulus of wormlike micellar solutions are here determined. The values agree with the determination by cone-and-plate rheometry.

cond-mat.soft↗

arXiv2015

Isothermal titration calorimetry as a powerful tool to quantify and better understand agglomeration mechanisms during interaction processes between TiO2 nanoparticles and humic acids

The association processes between engineered TiO2 nanoparticles and Suwannee River humic acids are investigated by isothermal titration calorimetry and by measuring the exchanged heat during binding process allowing the determination of thermodynamic (change of enthalpy, Gibbs free energy and entropy) and reaction (binding affinity constant, reaction stoichiometry) parameters. Our results indicate that strong TiO2-Suwannee River humic acid interactions are entropically and enthalpically favorable with exothermic binding reactions and that the mixing order is also an important parameter. High humic acid concentrations induce homoagglomeration ("self" assembly) and are shown to favor an enthalpically driven association process. Light scattering techniques are also considered to investigate the influence of TiO2 surface charge modifications and agglomeration mechanisms. Patch and bridging mechanisms are found to result into the formation of large agglomerates once charge inversion of TiO2-humic acid complexes is achieved. Moreover van der Waals interactions are also found to play a significant role during interaction processes due to the amphiphilic character of humic acids.

cond-mat.mtrl-sci↗

arXiv2015

Towards a better understanding on agglomeration mechanisms and thermodynamic properties of TiO2 nanoparticles interacting with natural organic matter

Interaction between engineered nanoparticles and natural organic matter is investigated by measuring the exchanged heat during binding process with isothermal titration calorimetry. TiO2 anatase nanoparticles and alginate are used as engineered nanoparticles and natural organic matter to get an insight into the thermodynamic association properties and mechanisms of adsorption and agglomeration. Changes of enthalpy, entropy and total free energy, reaction stoichiometry and affinity binding constant are determined or calculated at a pH value where the TiO2 nanoparticles surface charge is positive and the alginate exhibits a negative structural charge. Our results indicate that strong TiO2-alginate interactions are essentially entropy driven and enthalpically favorable with exothermic binding reactions. The reaction stoichiometry and entropy gain are also found dependent on the mixing order. Finally correlation is established between the binding enthalpy, the reaction stoichiometry and the zeta potential values determined by electrophoretic mobility measurements. From these results two types of agglomeration mechanisms are proposed depending on the mixing order. Addition of alginate in TiO2 dispersions is found to form agglomerates due to polymer bridging whereas addition of TiO2 in alginate promotes a more individually coating of the nanoparticles.

cond-mat.mtrl-sci↗

arXiv2013

Rotational microrheology of Maxwell fluids using micron-sized wires

We demonstrate a simple method for rotational microrheology in complex fluids, using micrometric wires. The three-dimensional rotational Brownian motion of the wires suspended in Maxwell fluids is measured from their projection on the focal plane of a microscope. We analyze the mean-squared angular displacement of the wires of length between 1 and 40 microns. The viscoelastic properties of the suspending fluids are extracted from this analysis and found to be in good agreement with macrorheology data. Viscosities of simple and complex fluids between 0.01 and 30 Pa.s could be measured. As for the elastic modulus, values up to ~ 5 Pa could be determined. This simple technique, allowing for a broad range of probed length scales, opens new perspectives in microrheology of heterogeneous materials such as gels, glasses and cells.

cond-mat.soft↗

arXiv2012

3D rotational diffusion microrheology using 2D video microscopy

We propose a simple way to perform three-dimensional (3D) rotational microrheology using two-dimensional (2D) video microscopy. The 3D rotational brownian motion of micrometric wires in a viscous fluid is deduced from their projection on the focal plane of an optical microscope objective. The rotational diffusion coefficient of the wires of length between 1-100 μm is extracted, as well as their diameter distribution in good agreement with electron microscopy measurements. This is a promising way to characterize soft visco-elastic materials, and probe the dimensions of anisotropic objects.

cond-mat.soft↗

arXiv2011

The role of the coating and aggregation state in the interactions between iron oxide nanoparticles and 3T3 fibroblasts

Recent nanotoxicity studies revealed that the physico-chemical characteristics of engineered nanomaterials play an important role in the interactions with living cells. Here, we report on the toxicity and uptake of the iron oxide sub-10 nm nanoparticles by NIH/3T3 mouse fibroblasts. Coating strategies include low-molecular weight ligands (citric acid) and polymers (poly(acrylic acid), MW = 2000 g mol-1). We find that most particles were biocompatible, as exposed cells remained 100% viable relative to controls. The strong uptake shown by the citrate-coated particles is related to the destabilization of the dispersions in the cell culture medium and their sedimentation down to the cell membranes.

cond-mat.mtrl-sci↗