arXiv subjects

Jelena Vuckovic

Publications and source records attributed to Jelena Vuckovic.

At least 73 records · Page 4Linked to original sources

arXiv2011

Multiply resonant high quality photonic crystal nanocavities

We propose and experimentally demonstrate a photonic crystal nanocavity with multiple resonances that can be tuned nearly independently. The design is composed of two orthogonal intersecting nanobeam cavities. Experimentally, we measure cavity quality factors of 6,600 and 1000 for resonances separated by 382 nm; we measure a maximum separation between resonances of 506 nm. These structures are promising for enhancing efficiency in nonlinear optical processes such as sum/difference frequency and stimulated Raman scattering.

physics.optics↗

arXiv2011

Nanobeam Photonic Crystal Cavity Light-Emitting Diodes

We present results on electrically driven nanobeam photonic crystal cavities formed out of a lateral p-i-n junction in gallium arsenide. Despite their small conducting dimensions, nanobeams have robust electrical properties with high current densities possible at low drive powers. Much like their two-dimensional counterparts, the nanobeam cavities exhibit bright electroluminescence at room temperature from embedded 1,250 nm InAs quantum dots. A small room temperature differential gain is observed in the cavities with minor beam self-heating suggesting that lasing is possible. These results open the door for efficient electrical control of active nanobeam cavities for diverse nanophotonic applications.

physics.optics↗

arXiv2011

Second harmonic generation in GaP photonic crystal waveguides

We demonstrate enhanced second harmonic generation in a gallium phosphide photonic crystal waveguide with a measured external conversion efficiency of 5$\times10^{-7}$/W. Our results are promising for frequency conversion of on-chip integrated emitters having broad spectra or large inhomogeneous broadening, as well as for frequency conversion of ultrashort pulses.

physics.optics↗

arXiv2011

Ultra-low threshold, electrically pumped quantum dot photonic crystal nanocavity laser

Efficient, low threshold, and compact semiconductor laser sources are being investigated for many applications in high-speed communications, information processing, and optical interconnects. The best edge-emitting and vertical cavity surface-emitting lasers (VCSELs) have thresholds on the order of 100 \muA[1,2] but dissipate too much power to be practical for many applications, particularly optical interconnects[3]. Optically pumped photonic crystal (PC) nanocavity lasers represent the state of the art in low-threshold lasers[4,5]; however, in order to be practical, techniques to electrically pump these structures must be developed. Here we demonstrate a quantum dot photonic crystal nanocavity laser in gallium arsenide pumped by a lateral p-i-n junction formed by ion implantation. Continuous wave lasing is observed at temperatures up to 150 K. Thresholds of only 181 nA at 50 K and 287 nA at 150 K are observed - the lowest thresholds ever observed in any type of electrically pumped laser.

cond-mat.mtrl-sci↗

arXiv2011

Coherent Optical Spectroscopy of a Single Quantum Dot Via an Off-Resonant Cavity

In recent experiments on coupled quantum dot (QD) optical cavity systems a pronounced interaction between the dot and the cavity has been observed even for detunings of many cavity linewidths. This interaction has been attributed to an incoherent phonon-mediated scattering process and is absent in atomic systems. Here, we demonstrate that despite its incoherent nature, this process preserves the signatures of coherent interaction between a QD and a strong driving laser, which may be observed via the optical emission from the off-resonant cavity. Under bichromatic driving of the QD, the cavity emission exhibits spectral features consistent with optical dressing of the QD transition. In addition to revealing new aspects of the off-resonant QD-cavity interaction, this result provides a new, simpler means of coherently probing QDs than traditional approaches and opens the possibility of employing off-resonant cavities to optically interface QD-nodes in quantum networks.

quant-ph↗

arXiv2010

Fast quantum dot single photon source triggered at telecommunications wavelength

We demonstrate a quantum dot single photon source at 900 nm triggered at 300 MHz by a continuous wave telecommunications wavelength laser followed by an electro-optic modulator. The quantum dot is excited by on-chip-generated second harmonic radiation, resonantly enhanced by a GaAs photonic crystal cavity surrounding the InAs quantum dot. Our result suggests a path toward the realization of telecommunications-wavelength-compatible quantum dot single photon sources with speeds exceeding 1 GHz.

quant-ph↗

arXiv2010

Phonon Mediated Off-Resonant Quantum Dot-Cavity Coupling

A theoretical model for the phonon-mediated off-resonant coupling between a quantum dot and a cavity, under resonant excitation of the quantum dot, is presented. We show that the coupling is caused by electron-phonon interaction in the quantum dot and is enhanced by the cavity. We analyze recently observed resonant quantum dot spectroscopic data by our theoretical model.

cond-mat.mes-hall↗

arXiv2010

Low Power Resonant Optical Excitation of an Optomechanical Cavity

We demonstrate the actuation of a double beam opto-mechanical cavity with a sinusoidally varying optical input power. We observe the driven mechanical motion with only 200 nW coupled to the optical cavity mode. We also investigate the pump power dependence of the radio-frequency response for both the driving power and the probe power. Finally, we investigate the dependence of the amplitude of the mechanical motion on mechanical cavity quality factor.

physics.optics↗

arXiv2010

Deterministic coupling of a single nitrogen vacancy center to a photonic crystal cavity

We describe and experimentally demonstrate a technique for deterministic coupling between a photonic crystal (PC) nanocavity and single emitters. The technique is based on in-situ scanning of a PC cavity over a sample and allows the positioning of the cavity over a desired emitter with nanoscale resolution. The power of the technique, which we term a Scanning Cavity Microscope (SCM), is demonstrated by coupling the PC nanocavity to a single nitrogen vacancy (NV) center in diamond, an emitter system that provides optically accessible electron and nuclear spin qubits.

quant-ph↗

arXiv2010

Linewidth broadening of a quantum dot coupled to an off-resonant cavity

We study the coupling between a photonic crystal cavity and an off-resonant quantum dot under resonant excitation of the cavity or the quantum dot. Linewidths of the quantum dot and the cavity as a function of the excitation laser power are measured. We show that the linewidth of the quantum dot, measured by observing the cavity emission, is significantly broadened compared to the theoretical estimate. This indicates additional incoherent coupling between the quantum dot and the cavity.

quant-ph↗

arXiv2010

Observation of Transparency of Erbium-doped Silicon nitride in photonic crystal nanobeam cavities

One-dimensional nanobeam photonic crystal cavities are fabricated in an Er-doped amorphous silicon nitride layer. Photoluminescence from the cavities around 1.54 um is studied at cryogenic and room temperatures at different optical pump powers. The resonators demonstrate Purcell enhanced absorption and emission rates, also confirmed by time-resolved measurements. Resonances exhibit linewidth narrowing with pump power, signifying absorption bleaching and the onset of stimulated emission in the material at both 5.5 K and room temperature. We estimate from the cavity linewidths that Er has been pumped to transparency at the cavity resonance wavelength.

physics.optics↗

arXiv2010

Nanobeam photonic crystal cavity quantum dot laser

The lasing behavior of one dimensional GaAs nanobeam cavities with embedded InAs quantum dots is studied at room temperature. Lasing is observed throughout the quantum dot PL spectrum, and the wavelength dependence of the threshold is calculated. We study the cavity lasers under both 780 nm and 980 nm pump, finding thresholds as low as 0.3 uW and 19 uW for the two pump wavelengths, respectively. Finally, the nanobeam cavity laser wavelengths are tuned by up to 7 nm by employing a fiber taper in near proximity to the cavities. The fiber taper is used both to efficiently pump the cavity and collect the cavity emission.

physics.optics↗

arXiv2010

Photoluminescence from silicon dioxide photonic crystal cavities with embedded silicon nanocrystals

One dimensional nanobeam photonic crystal cavities are fabricated in silicon dioxide with silicon nanocrystals. Quality factors of over 9 x 10^3 are found in experiment, matching theoretical predictions, with mode volumes of 1.5(lambda/n)^3 . Photoluminescence from the cavity modes is observed in the visible wavelength range 600-820 nm. Studies of the lossy characteristics of the cavities are conducted at varying temperatures and pump powers. Free carrier absorption effects are found to be significant at pump powers as low as a few hundred nanowatts.

physics.optics↗

arXiv2010

Coupled fiber taper extraction of 1.53 um photoluminescence from erbium doped silicon nitride photonic crystal cavities

Optical fiber tapers are used to collect photoluminescence emission at ~1.5 um from photonic crystal cavities fabricated in erbium doped silicon nitride on silicon. Photoluminescence collection via fiber taper is enhanced 2.5 times relative to free space, with a total taper collection efficiency of 53%. By varying the fiber taper offset from the cavity, a broad tuning range of coupling strength is obtained. This material system combined with fiber taper collection is promising for building on-chip optical amplifiers.

physics.optics↗

arXiv2009

Inverse design of nanophotonic structures using complementary convex optimization

A computationally-fast inverse design method for nanophotonic structures is presented. The method is based on two complementary convex optimization problems which modify the dielectric structure and resonant field respectively. The design of one- and two-dimensional nanophotonic resonators is demonstrated and is shown to require minimal computational resources.

physics.optics↗

arXiv2009

Theory of Electro-optic Modulation via a Quantum Dot Coupled to a Nano-resonator

In this paper, we analyze the performance of an electro-optic modulator based on a single quantum dot strongly coupled to a nano-resonator, where electrical control of the quantum dot frequency is achieved via quantum confined Stark effect. Using realistic system parameters, we show that modulation speeds of a few tens of GHz are achievable with this system, while the energy per switching operation can be as small as 0.5 fJ. In addition, we study the non-linear distortion, and the effect of pure quantum dot dephasing on the performance of the modulator.

quant-ph↗

arXiv2009

Second harmonic generation in gallium phosphide photonic crystal nanocavities with ultralow continuous wave pump power

We demonstrate second harmonic generation in photonic crystal nanocavities fabricated in the semiconductor gallium phosphide. We observe second harmonic radiation at 750 nm with input powers of only nanowatts coupled to the cavity and conversion efficiency $P_{\rm out}/P_{\rm in, coupled}^2 = 430%/{\rm W}$. The large electronic band gap of GaP minimizes absorption loss, allowing efficient conversion. Our results are promising for integrated, low-power light sources and on-chip reduction of input power in other nonlinear processes.

physics.optics↗

arXiv2009

Photonic Crystal Cavities in Silicon Dioxide

One dimensional nano-beam photonic crystal cavities fabricated in silicon dioxide are considered in both simulation and experiment. Quality factors of over 10^4 are found via simulation, while quality factors of over 5*10^3 are found in experiment, for cavities with mode volumes of 2.0 cubic wavelengths (in oxide) and in the visible wavelength range (600-716nm). The dependences of the cavity quality factor and mode volume for different design parameters are also considered.

physics.optics↗