arXiv subjects

Jenni Raitoharju

Publications and source records attributed to Jenni Raitoharju.

At least 19 recordsLinked to original sources

arXiv2026

MS-RFD: Multi-Signal Release Frame Detection in Hammer Throw from Reconstructed 3D Trajectories

Recent advances in artificial intelligence and computer vision are reshaping sports performance analysis by enabling automated detection, tracking, and performance analysis. In hammer throw, performance is strongly determined by the kinematic conditions at release, particularly release speed, release angle, and release height. However, identifying the release instant from video typically requires manual frame-by-frame inspection, which is subjective and cumbersome in real-world training scenarios. In this paper, we present a fully automatic multi-signal release frame detection (MS-RFD) method for hammer throw using reconstructed 3D hammer trajectories. The proposed method integrates four complementary kinematic signals: speed dynamics, angular velocity transition, radial distance relative to the rotation center, and post-release trajectory linearity. These signals are fused to score and verify candidate release frames. MS-RFD is evaluated through the throwing-distance estimation error obtained from the release parameters estimated at the detected frame. An ablation study analyzes the contribution of each signal and compares alternative candidate selection strategies. The results show that speed dynamics and radial expansion provide the strongest signals for release frame detection, while angular velocity and post-release linearity provide smaller refinements.

cs.CV↗

arXiv2026

Computer vision-based estimation of invertebrate biomass

The ability to estimate invertebrate biomass using only images could help scaling up quantitative biodiversity monitoring efforts. Computer vision-based methods have the potential to omit the manual, time-consuming, and destructive process of dry weighing specimens. We present two approaches for dry mass estimation that do not require additional manual effort apart from imaging the specimens: fitting a linear model with novel predictors, automatically calculated by an imaging device, and training a family of end-to-end deep neural networks for the task, using single-view, multi-view, and metadata-aware architectures. We propose using area and sinking speed as predictors. These can be calculated with BIODISCOVER, which is a dual-camera system that captures image sequences of specimens sinking in an ethanol column. For this study, we collected a large dataset of dry mass measurement and image sequence pairs to train and evaluate models. We show that our methods can estimate specimen dry mass even with complex and visually diverse specimen morphologies. Combined with automatic taxonomic classification, our approach is an accurate method for group-level dry mass estimation, with a median percentage error of 10-20% for individuals. We highlight the importance of choosing appropriate evaluation metrics, and encourage using both percentage errors and absolute errors as metrics, because they measure different properties. We also explore different optimization losses, data augmentation methods, and model architectures for training deep-learning models.

cs.CV↗

arXiv2026

ULW-SleepNet: An Ultra-Lightweight Network for Multimodal Sleep Stage Scoring

Automatic sleep stage scoring is crucial for the diagnosis and treatment of sleep disorders. Although deep learning models have advanced the field, many existing models are computationally demanding and designed for single-channel electroencephalography (EEG), limiting their practicality for multimodal polysomnography (PSG) data. To overcome this, we propose ULW-SleepNet, an ultra-lightweight multimodal sleep stage scoring framework that efficiently integrates information from multiple physiological signals. ULW-SleepNet incorporates a novel Dual-Stream Separable Convolution (DSSC) Block, depthwise separable convolutions, channel-wise parameter sharing, and global average pooling to reduce computational overhead while maintaining competitive accuracy. Evaluated on the Sleep-EDF-20 and Sleep-EDF-78 datasets, ULW-SleepNet achieves accuracies of 86.9% and 81.4%, respectively, with only 13.3K parameters and 7.89M FLOPs. Compared to state-of-the-art methods, our model reduces parameters by up to 98.6% with only marginal performance loss, demonstrating its strong potential for real-time sleep monitoring on wearable and IoT devices. The source code for this study is publicly available at https://github.com/wzw999/ULW-SLEEPNET.

cs.LG↗

arXiv2025

A multimodal stress detection dataset with facial expressions and physiological signals

Affective computing has garnered the attention and interest of researchers in recent years, as there is a need for AI systems to better understand and react to human emotions. However, analyzing human emotions, such as mood or stress, is quite complex. While various stress studies use facial expressions and wearables, most existing datasets rely on processing data from a single modality. This paper presents EmpathicSchool, a novel dataset that captures facial expressions and the associated physiological signals, such as heart rate, electrodermal activity, and skin temperature, under different stress levels. The data was collected from 30 participants during different sessions for about ninety minutes each (for a total of 40 hours). The data includes seven different signal types, including both computer vision and physiological features that can be used to detect stress. In addition, various experiments were conducted to validate the signal quality.

cs.MM↗

arXiv2025

Generalized Reference Kernel With Negative Samples For Support Vector One-class Classification

This paper focuses on small-scale one-class classification with some negative samples available. We propose Generalized Reference Kernel with Negative Samples (GRKneg) for One-class Support Vector Machine (OC-SVM). We study different ways to select/generate the reference vectors and recommend an approach for the problem at hand. It is worth noting that the proposed method does not use any labels in the model optimization but uses the original OC-SVM implementation. Only the kernel used in the process is improved using the negative data. We compare our method with the standard OC-SVM and with the binary Support Vector Machine (SVM) using different amounts of negative samples. Our approach consistently outperforms the standard OC-SVM using Radial Basis Function kernel. When there are plenty of negative samples, the binary SVM outperforms the one-class approaches as expected, but we show that for the lowest numbers of negative samples the proposed approach clearly outperforms the binary SVM.

cs.LG↗

arXiv2025

AquaMonitor: A multimodal multi-view image sequence dataset for real-life aquatic invertebrate biodiversity monitoring

This paper presents the AquaMonitor dataset, the first large computer vision dataset of aquatic invertebrates collected during routine environmental monitoring. While several large species identification datasets exist, they are rarely collected using standardized collection protocols, and none focus on aquatic invertebrates, which are particularly laborious to collect. For AquaMonitor, we imaged all specimens from two years of monitoring whenever imaging was possible given practical limitations. The dataset enables the evaluation of automated identification methods for real-life monitoring purposes using a realistically challenging and unbiased setup. The dataset has 2.7M images from 43,189 specimens, DNA sequences for 1358 specimens, and dry mass and size measurements for 1494 specimens, making it also one of the largest biological multi-view and multimodal datasets to date. We define three benchmark tasks and provide strong baselines for these: 1) Monitoring benchmark, reflecting real-life deployment challenges such as open-set recognition, distribution shift, and extreme class imbalance, 2) Classification benchmark, which follows a standard fine-grained visual categorization setup, and 3) Few-shot benchmark, which targets classes with only few training examples from very fine-grained categories. Advancements on the Monitoring benchmark can directly translate to improvement of aquatic biodiversity monitoring, which is an important component of regular legislative water quality assessment in many countries.

cs.CV↗

arXiv2024

Efficient Curation of Invertebrate Image Datasets Using Feature Embeddings and Automatic Size Comparison

The amount of image datasets collected for environmental monitoring purposes has increased in the past years as computer vision assisted methods have gained interest. Computer vision applications rely on high-quality datasets, making data curation important. However, data curation is often done ad-hoc and the methods used are rarely published. We present a method for curating large-scale image datasets of invertebrates that contain multiple images of the same taxa and/or specimens and have relatively uniform background in the images. Our approach is based on extracting feature embeddings with pretrained deep neural networks, and using these embeddings to find visually most distinct images by comparing their embeddings to the group prototype embedding. Also, we show that a simple area-based size comparison approach is able to find a lot of common erroneous images, such as images containing detached body parts and misclassified samples. In addition to the method, we propose using novel metrics for evaluating human-in-the-loop outlier detection methods. The implementations of the proposed curation methods, as well as a benchmark dataset containing annotated erroneous images, are publicly available in https://github.com/mikkoim/taxonomist-studio.

cs.CV↗

arXiv2024

Linear-time One-Class Classification with Repeated Element-wise Folding

This paper proposes an easy-to-use method for one-class classification: Repeated Element-wise Folding (REF). The algorithm consists of repeatedly standardizing and applying an element-wise folding operation on the one-class training data. Equivalent mappings are performed on unknown test items and the classification prediction is based on the item's distance to the origin of the final distribution. As all the included operations have linear time complexity, the proposed algorithm provides a linear-time alternative for the commonly used computationally much more demanding approaches. Furthermore, REF can avoid the challenges of hyperparameter setting in one-class classification by providing robust default settings. The experiments show that the proposed method can produce similar classification performance or even outperform the more complex algorithms on various benchmark datasets. Matlab codes for REF are publicly available at https://github.com/JenniRaitoharju/REF.

cs.LG↗

arXiv2024

Improving Taxonomic Image-based Out-of-distribution Detection With DNA Barcodes

Image-based species identification could help scaling biodiversity monitoring to a global scale. Many challenges still need to be solved in order to implement these systems in real-world applications. A reliable image-based monitoring system must detect out-of-distribution (OOD) classes it has not been presented before. This is challenging especially with fine-grained classes. Emerging environmental monitoring techniques, DNA metabarcoding and eDNA, can help by providing information on OOD classes that are present in a sample. In this paper, we study if DNA barcodes can also support in finding the outlier images based on the outlier DNA sequence's similarity to the seen classes. We propose a re-ordering approach that can be easily applied on any pre-trained models and existing OOD detection methods. We experimentally show that the proposed approach improves taxonomic OOD detection compared to all common baselines. We also show that the method works thanks to a correlation between visual similarity and DNA barcode proximity. The code and data are available at https://github.com/mikkoim/dnaimg-ood.

cs.CV↗

arXiv2023

Convolutional autoencoder-based multimodal one-class classification

One-class classification refers to approaches of learning using data from a single class only. In this paper, we propose a deep learning one-class classification method suitable for multimodal data, which relies on two convolutional autoencoders jointly trained to reconstruct the positive input data while obtaining the data representations in the latent space as compact as possible. During inference, the distance of the latent representation of an input to the origin can be used as an anomaly score. Experimental results using a multimodal macroinvertebrate image classification dataset show that the proposed multimodal method yields better results as compared to the unimodal approach. Furthermore, study the effect of different input image sizes, and we investigate how recently proposed feature diversity regularizers affect the performance of our approach. We show that such regularizers improve performance.

cs.LG↗

arXiv2023

Learning distinct features helps, provably

We study the diversity of the features learned by a two-layer neural network trained with the least squares loss. We measure the diversity by the average $L_2$-distance between the hidden-layer features and theoretically investigate how learning non-redundant distinct features affects the performance of the network. To do so, we derive novel generalization bounds depending on feature diversity based on Rademacher complexity for such networks. Our analysis proves that more distinct features at the network's units within the hidden layer lead to better generalization. We also show how to extend our results to deeper networks and different losses.

cs.LG↗

arXiv2023

On Feature Diversity in Energy-based Models

Energy-based learning is a powerful learning paradigm that encapsulates various discriminative and generative approaches. An energy-based model (EBM) is typically formed of inner-model(s) that learn a combination of the different features to generate an energy mapping for each input configuration. In this paper, we focus on the diversity of the produced feature set. We extend the probably approximately correct (PAC) theory of EBMs and analyze the effect of redundancy reduction on the performance of EBMs. We derive generalization bounds for various learning contexts, i.e., regression, classification, and implicit regression, with different energy functions and we show that indeed reducing redundancy of the feature set can consistently decrease the gap between the true and empirical expectation of the energy and boosts the performance of the model.

cs.LG↗

arXiv2023

WLD-Reg: A Data-dependent Within-layer Diversity Regularizer

Neural networks are composed of multiple layers arranged in a hierarchical structure jointly trained with a gradient-based optimization, where the errors are back-propagated from the last layer back to the first one. At each optimization step, neurons at a given layer receive feedback from neurons belonging to higher layers of the hierarchy. In this paper, we propose to complement this traditional 'between-layer' feedback with additional 'within-layer' feedback to encourage the diversity of the activations within the same layer. To this end, we measure the pairwise similarity between the outputs of the neurons and use it to model the layer's overall diversity. We present an extensive empirical study confirming that the proposed approach enhances the performance of several state-of-the-art neural network models in multiple tasks. The code is publically available at \url{https://github.com/firasl/AAAI-23-WLD-Reg}

cs.LG↗

arXiv2023

Computer Vision on X-ray Data in Industrial Production and Security Applications: A Comprehensive Survey

X-ray imaging technology has been used for decades in clinical tasks to reveal the internal condition of different organs, and in recent years, it has become more common in other areas such as industry, security, and geography. The recent development of computer vision and machine learning techniques has also made it easier to automatically process X-ray images and several machine learning-based object (anomaly) detection, classification, and segmentation methods have been recently employed in X-ray image analysis. Due to the high potential of deep learning in related image processing applications, it has been used in most of the studies. This survey reviews the recent research on using computer vision and machine learning for X-ray analysis in industrial production and security applications and covers the applications, techniques, evaluation metrics, datasets, and performance comparison of those techniques on publicly available datasets. We also highlight some drawbacks in the published research and give recommendations for future research in computer vision-based X-ray analysis.

cs.CV↗

arXiv2022

1st Workshop on Maritime Computer Vision (MaCVi) 2023: Challenge Results

The 1$^{\text{st}}$ Workshop on Maritime Computer Vision (MaCVi) 2023 focused on maritime computer vision for Unmanned Aerial Vehicles (UAV) and Unmanned Surface Vehicle (USV), and organized several subchallenges in this domain: (i) UAV-based Maritime Object Detection, (ii) UAV-based Maritime Object Tracking, (iii) USV-based Maritime Obstacle Segmentation and (iv) USV-based Maritime Obstacle Detection. The subchallenges were based on the SeaDronesSee and MODS benchmarks. This report summarizes the main findings of the individual subchallenges and introduces a new benchmark, called SeaDronesSee Object Detection v2, which extends the previous benchmark by including more classes and footage. We provide statistical and qualitative analyses, and assess trends in the best-performing methodologies of over 130 submissions. The methods are summarized in the appendix. The datasets, evaluation code and the leaderboard are publicly available at https://seadronessee.cs.uni-tuebingen.de/macvi.

cs.CV↗

arXiv2022

Reducing Redundancy in the Bottleneck Representation of the Autoencoders

Autoencoders are a type of unsupervised neural networks, which can be used to solve various tasks, e.g., dimensionality reduction, image compression, and image denoising. An AE has two goals: (i) compress the original input to a low-dimensional space at the bottleneck of the network topology using an encoder, (ii) reconstruct the input from the representation at the bottleneck using a decoder. Both encoder and decoder are optimized jointly by minimizing a distortion-based loss which implicitly forces the model to keep only those variations of input data that are required to reconstruct the and to reduce redundancies. In this paper, we propose a scheme to explicitly penalize feature redundancies in the bottleneck representation. To this end, we propose an additional loss term, based on the pair-wise correlation of the neurons, which complements the standard reconstruction loss forcing the encoder to learn a more diverse and richer representation of the input. We tested our approach across different tasks: dimensionality reduction using three different dataset, image compression using the MNIST dataset, and image denoising using fashion MNIST. The experimental results show that the proposed loss leads consistently to superior performance compared to the standard AE loss.

cs.CV↗

arXiv2022

Habitat classification from satellite observations with sparse annotations

Remote sensing benefits habitat conservation by making monitoring of large areas easier compared to field surveying especially if the remote sensed data can be automatically analyzed. An important aspect of monitoring is classifying and mapping habitat types present in the monitored area. Automatic classification is a difficult task, as classes have fine-grained differences and their distributions are long-tailed and unbalanced. Usually training data used for automatic land cover classification relies on fully annotated segmentation maps, annotated from remote sensed imagery to a fairly high-level taxonomy, i.e., classes such as forest, farmland, or urban area. A challenge with automatic habitat classification is that reliable data annotation requires field-surveys. Therefore, full segmentation maps are expensive to produce, and training data is often sparse, point-like, and limited to areas accessible by foot. Methods for utilizing these limited data more efficiently are needed. We address these problems by proposing a method for habitat classification and mapping, and apply this method to classify the entire northern Finnish Lapland area into Natura2000 classes. The method is characterized by using finely-grained, sparse, single-pixel annotations collected from the field, combined with large amounts of unannotated data to produce segmentation maps. Supervised, unsupervised and semi-supervised methods are compared, and the benefits of transfer learning from a larger out-of-domain dataset are demonstrated. We propose a \ac{CNN} biased towards center pixel classification ensembled with a random forest classifier, that produces higher quality classifications than the models themselves alone. We show that cropping augmentations, test-time augmentation and semi-supervised learning can help classification even further.

cs.CV↗

arXiv2022

Efficient CNN with uncorrelated Bag of Features pooling

Despite the superior performance of CNN, deploying them on low computational power devices is still limited as they are typically computationally expensive. One key cause of the high complexity is the connection between the convolution layers and the fully connected layers, which typically requires a high number of parameters. To alleviate this issue, Bag of Features (BoF) pooling has been recently proposed. BoF learns a dictionary, that is used to compile a histogram representation of the input. In this paper, we propose an approach that builds on top of BoF pooling to boost its efficiency by ensuring that the items of the learned dictionary are non-redundant. We propose an additional loss term, based on the pair-wise correlation of the items of the dictionary, which complements the standard loss to explicitly regularize the model to learn a more diverse and rich dictionary. The proposed strategy yields an efficient variant of BoF and further boosts its performance, without any additional parameters.

cs.CV↗