arXiv subjects

Jianan Fang

Publications and source records attributed to Jianan Fang.

31 records · Page 2Linked to original sources

arXiv2026

Mid-infrared edge-enhanced imaging via angle-selective nonlinear filtering

Mid-infrared reconfigurable edge-enhanced imaging is highly demanded in sensing and vision fields. Here, we propose a novel scheme for mid-infrared upconversion imaging with high tunability between bright-field and edge-enhanced modalities. The involved engineering of the nonlinear process favors shaping the optical transfer function of the imaging system. Consequently, a nonlinear angle-selective filter can be configured to perform an all-optical Fourier processing of the image, which highly depends on phase-matching parameters. We numerically demonstrate the ability to switch modalities between the bright-field and edge-enhanced imaging by tuning the crystal temperature, and to simultaneously acquire both information by dichromatic illumination. Notably, the achieved reconfigurability is realized without changing the imaging settings, which contrasts to previous instantiations based on pump adaptation. Therefore, the proposed architecture of upconversion imagers would pave a novel way to implement layout-compact and all-optical processing for infrared images.

physics.optics↗

arXiv2026

Mid-infrared Fourier ptychographic upconversion imaging

Frequency upconversion technique offers an appealing approach for sensitive mid-infrared (MIR) imaging at room temperature. However, the spatial resolution of the upconversion imager has been notoriously restricted by the limited transverse section of the involved nonlinear crystal at the Fourier plane. Here, we implement a wide-field and high-resolution MIR upconversion imaging system based on elliptical pumping and Fourier ptychography. Specifically, an elliptical pump beam is engineered to accommodate the narrow aperture of chirped-poling crystals, thus facilitating the acquisition of high spatial frequency components in the lateral direction. Such an elliptical passband in the Fourier space is then discretely rotated to generate a sequence of upconversion images, which allows computational recovery of a high-resolution object image through a combination of synthetic aperture and phase retrieval operations. Consequently, an enhanced spatial resolution of 39 $μ$m is achieved within a field of view about 25 mm, which corresponds to a space-bandwidth product of 3.2$\times$10$^5$, over tenfold larger than previously demonstrated values. Moreover, the MIR upconversion imager can operate under a low-light illumination of 1 photon/pulse/pixel. Therefore, the presented paradigm of nonlinear Fourier ptychography paves the way toward high-throughput infrared imaging with massive resolvable elements and single-photon sensitivity, which would stimulate a variety of applications such as industry inspection and biomedical diagnosis.

physics.optics↗

arXiv2026

High-resolution mid-infrared single-photon upconversion ranging

Single-photon laser ranging has widespread applications in remote sensing and target recognition. However, highly-sensitive light detection and ranging (LiDAR) has long been restricted in visible or near-infrared bands. An appealing quest is to extend the operation wavelength into the mid-infrared (MIR) region, which calls for an infrared photon counting system at high detection sensitivity and precise temporal resolution. Here, we devise and demonstrate a MIR upconversion LiDAR based on nonlinear asynchronous optical sampling. Specifically, the infrared probe is interrogated in a nonlinear crystal by a train of pump pulses at a slightly different repetition rate, which favors for a temporal optical scanning at a picosecond timing resolution and a kilohertz refreshing rate over $\sim$50 ns. Moreover, the cross-correlation upconversion trace is temporally stretched by a factor of 2$\times$10$^4$, which can thus be recorded by a low-bandwidth silicon detector. In combination with time-correlated photon-counting technique, the achieved effective resolution is about two orders of magnitude better than the timing jitter of the detector itself, which facilitates a ranging precision of 4 $μ$m under a low detected flux of 8$\times$10$^{-5}$ photons per pulse. The presented MIR time-of-flight range finder is featured with single-photon sensitivity and high positioning resolution, which would be particularly useful in infrared sensing and imaging in photon-starved scenarios.

physics.optics↗

arXiv2026

Widely tunable mid-infrared fiber-feedback optical parametric oscillator

Synchronously pumped optical parametric oscillators (OPOs) provide uniquely versatile platforms to generate ultrafast mid-infrared pulses within a spectral range beyond the access of conventional mode-locked lasers. However, conventional OPO sources based on bulk crystals have been plagued by complex optical alignment and large physical footprint. Here, we devise and implement two OPO variants based on a polarization-maintaining fiber-feedback cavity, which allow to robustly deliver sub-picosecond MIR pulses without the need of active stabilization. The first one integrates an erbium-doped fiber into the OPO cavity as the additional gain medium, which significantly reduces the pump threshold and allows stable optical pulse formation within a spectral range of 1553-1586 nm. The second one adopts a chirped poling nonlinear crystal in a passive-fiber cavity to further extend the operation spectral coverage, which facilitates broad tuning ranges of 1350-1768 nm and 2450-4450 nm for the signal and idler bands, respectively. Therefore, the presented mid-infrared OPO source is featured with high compactness, robust operation, and wide tunability, which would be attractive for subsequent applications such as infrared photonics, biomedical examination, and molecular spectroscopy.

physics.optics↗

arXiv2026

Mid-infrared single-photon computational temporal ghost imaging

The capture of transient optical waveforms is critical to reveal dynamical phenomena in various fields. However, fast and sensitive mid-infrared (MIR) measurements are typically limited by processing bandwidth and detection sensitivity of conventional infrared detectors. Here, we propose and implement a computational temporal ghost imaging system, which favors high-speed and high-sensitivity characterization of MIR temporal objects. The core process relies on high-fidelity nonlinear optical transduction for facilitating both the programmable structured illumination and frequency upconversion detection based on the high-performance near-infrared light modulator and detector, respectively. Consequently, the correlation between the recorded integral upconversion intensity and the designated encoding patterns allows one to reconstruct the MIR profiles with a temporal resolution of 80 ps, well beyond the intrinsic bandwidth or timing jitter of the involved detectors. Moreover, a record-high detection sensitivity is manifested by recovering single-photon MIR waveforms with an incident flux below 0.1 photon/bit. Additionally, faithful reconstructions at sub-Nyquist sampling rates are demonstrated using the compressive sensing algorithm, which can reduce the data acquisition time by over 90\%. The presented paradigm features high timing precision, single-photon sensitivity, and efficient data sampling, which could be extended into far-infrared or terahertz regions to address pressing demands in fast and sensitive sensing.

physics.optics↗

arXiv2026

Infrared Single-Pixel Hyperspectral Imaging via Spatial-Temporal Multiplexing

Near-infrared (NIR) hyperspectral imaging is widely used to reveal morphological and chemical information. However, conventional spectral imagers usually rely on costly focal plane arrays and suffer from data redundancy and inefficiencies in spatial-spectral data acquisition. Here, we devise and implement a single-pixel NIR hyperspectral imaging system based on high-fidelity spectrum-to-time mapping and high-precision spatial-encoding compressive measurements. The system employs a single-mode telecommunication fiber for temporal dispersion and a programmable spatial light modulator to impose structured spatial patterns, with all signals detected by a single InGaAs photodetector. By correlating temporally stretched waveforms with spatial encodings, we reconstruct 64$\times$64 spatially resolved hyperspectral datacubes spanning 50 spectral bands over the 1550-1600 nm range. Furthermore, real-time monitoring of dynamic liquid injection is demonstrated at a datacube refreshing rate of 12 Hz under sub-Nyquist sampling. The presented architecture features single-pixel simplicity, high optical throughput, and efficient data acquisition, which would pave a novel way for NIR spectral imaging in biomedical diagnostics and material characterization.

physics.optics↗

arXiv2026

Wide-field mid-infrared cavity-enhanced upconversion imaging

Mid-infrared (MIR) spectral imaging enables precise target identification and analysis by capturing rich chemical fingerprints, which calls for high-sensitivity broadband MIR imagers at room temperature. Here, we devise and implement a continuous-wave pumping MIR upconversion imaging system based on external-cavity enhancement, which favors a large field of view, a low cavity loss, and a high spectral resolution. The involved optical cavity is constructed in an integrated fashion by utilizing one crystal facet as a cavity mirror, which allows a 43-fold power enhancement for the single-longitudinal-mode pump at 1064 nm. In combination with the chirped-poled crystal design, high-fidelity and wide-field spectral imaging mapping is permitted to facilitate an acceptance angle up to 28.5$^\circ$ over a spectral coverage of 2.5--5 $μ$m. Moreover, a thermal locking approach is used to stabilize the cavity at the high-power operation, eliminating active feedback and ensuring long-term stability. A proof-of-principle demonstration is presented to showcase real-time observation of CO$_{2}$ gas injection dynamics. The implemented MIR upconversion imager features wide-field operation, high detection sensitivity, and compact footprint, which would benefit subsequent applications including environment monitoring, gas leakage inspection, and medical diagnostics.

physics.optics↗

arXiv2026

Mid-infrared single-pixel imaging via two-photon optical encoding

Mid-infrared (MIR) imaging offers powerful capabilities for label-free chemical analysis, yet its practical deployment remains hindered by the high cost and cryogenic complexity of conventional cameras. Two-photon absorption (TPA) provides a promising route to room-temperature MIR detection, but existing TPA imagers based on raster scanning or array detectors are constrained by slow acquisition speed or limited detection sensitivity. Here we present a scanning-free MIR single-pixel imaging approach based on non-degenerate TPA in a silicon detector. The involved spatial encoding is realized by a near-infrared structured pump with a resolution of 7 $μ$m, thus allowing high-fidelity MIR optical modulation through the phase-matching-free nonlinear interaction. Consequently, the spatially modulated TPA response is intrinsically integrated in the single-element photodetector, which favors computational reconstruction of the impinging MIR image by correlating measured intensities and predetermined patterns. Notably, the use of advanced algorithms of compressed sensing and deep learning facilitate image recovery under sub-Nyquist sampling with a compression ratio of 10\% and photon-starved illumination with an incident light flux of 0.5 pJ/pulse. Furthermore, a multispectral imaging over 2.5-3.8 $μ$m is manifested for chemical discrimination of plastic films. The presented architecture would offer a broadband and sensitive alternative for MIR imaging in various fields ranging from biomedical diagnostics to material inspection.

physics.optics↗

arXiv2026

Mid-infrared nonlinear pinhole imaging

Pinhole imaging is the most primitive and simplest lensless imaging paradigm, capable of transcending the physical limitations of conventional lens optics. This modality is particularly attractive for accessing a virtually infinite depth of focus or operating at extreme wavelengths. Here, we devise and implement a mid-infrared (MIR) pinhole imaging system at 3.07 $μ$m based on nonlinear spatial filtering. Instead of using a physical aperture, the involved pinhole is optically formed by a near-infrared pump at 1.03 $μ$m within a nonlinear crystal, which allows flexible and precise control over the effective aperture size to optimize imaging performance. Meanwhile, the MIR rays passing through the nonlinear pinhole are spectrally upconverted to facilitate sensitive imaging via a silicon camera. Consequently, the implemented upconversion pinhole imaging enables a large depth of field over 35 cm, beyond the reach of typical lens-based upconversion imagers. Furthermore, depth-resolving imaging across a large depth range is demonstrated in both the reflection and transmission modes based on time-of-flight and trigonometric techniques, respectively. The achieved capabilities -- featuring large operation depth, wide field of view, and flexible adaptability to various illumination conditions -- highlight the potential of the presented MIR imaging architecture for expansive scene detection and motion-aware applications in industrial inspection and night vision.

physics.optics↗

arXiv2026

Mid-infrared temporal ghost imaging via two-photon structured encoding

Temporal ghost imaging (TGI) enables ultrafast signal reconstruction beyond electronic bandwidth limits. Extending this concept to the mid-infrared (MIR) regime through nonlinear frequency conversion offers new opportunities for high-fidelity temporal detection, but remains constrained by stringent phase-matching condition, limited spectral coverage, and intricate optical alignment. Here, we propose and demonstrate a broadband MIR TGI system based on non-degenerate two-photon absorption. A temporally encoded near-infrared pump transfers structured modulation onto a MIR signal directly at a silicon detector, which facilitates concurrent modulation and detection without external nonlinear crystals. The reconstructed temporal waveforms exceed the detector bandwidth by more than fortyfold, achieve a detection sensitivity of 0.05 pJ/pulse, allow compressed sensing with 80\% fewer measurements, and support broadband operation across 2.5-3.8 $μ$m. This compact, alignment-free, and room-temperature system establishes a practical route for fast and sensitive MIR time-domain analysis, holding great promise for applications in time-resolved molecular spectroscopy, high-precision infrared ranging, and high-speed free-space communication.

physics.optics↗

arXiv2026

Mid-infrared single-photon sub-pixel temporal ghost imaging

Temporal ghost imaging (TGI) enables ultrafast temporal signal recovery using slow detectors, offering a promising route for high-speed mid-infrared (MIR) detection. However, conventional schemes remain limited in temporal resolution by the modulation bandwidth or pattern timescale, and are mostly confined to structured illumination. Here, we demonstrated a high-resolution MIR single-photon computational TGI system, which integrated nonlinear structured detection with sub-pixel temporal shifting. A pre-programmed near-infrared pump serves as a temporally optical gate to drive sum-frequency generation in a nonlinear crystal. Consequently, MIR waveforms at 3.4 $μ$m were upconverted, and captured by a room-temperature silicon detector. We realized sub-pixel operation by fractional-bin temporal stepping of the gate and multi-shot fusion via pseudo-inverse reconstruction. The sub-pixel shifting strategy decouples the achievable resolution from modulation speed, enabling 40 ps temporal precision at a driving rate of only 3.125 Gbps. This performance surpasses both detector jitter and pattern-rate limits, while maintaining single-photon sensitivity. The presented paradigm establishes a versatile route for ultrafast MIR waveform reconstruction, opening new opportunities in high-resolution infrared sensing and quantum photonics.

physics.optics↗

arXiv2026

Wide-field mid-infrared edge-enhanced upconversion imaging

Edge-enhanced imaging is critical for visualizing weakly absorbing and transparent objects. Extending this functionality into the mid-infrared (MIR) region enables chemical sensitivity and improved imaging performance for biomedical, material, and remote-sensing applications. Here, we present a wide-field MIR edge-enhanced upconversion imaging system that integrates vortex-pump complex-amplitude engineering with aperiodic quasi-phase matching. In contrast to the bright-field modality, the wide-field edge-enhanced operation shows sensitive dependence on the crystal position relative to the Fourier plane. The system achieves single-shot operation with a 25-mm field of view and 79-$μ$m spatial resolution, yielding a record-high space-bandwidth product of $7.9 \times 10^4$. We show that this capability enables direct visualization of phase gradients in transparent optical elements and enhances structural contrast in biological specimens. The demonstrated architecture combines high sensitivity, spectral specificity, and robust edge detection, offering a promising route toward advanced MIR imaging in industrial inspection and biomedical diagnostics.

physics.optics↗

arXiv2026

High-order mid-infrared nonlinear topological differentiator

High-order edge-enhanced imaging enables precise feature localization and effective background suppression, offering a powerful tool for real-time recognition and high-contrast visualization. Extending this capability to the mid-infrared (MIR) regime is particularly valuable for applications such as biomedical diagnostics, material inspection, and remote sensing, yet remains limited by inadequate spatial-frequency modulation fidelity and low detection sensitivity. Here, we demonstrate a high-sensitivity MIR upconversion differentiator operating at 3 $μ$m, which achieves isotropic high-order edge enhancement by optically imprinting topological complex-amplitude patterns onto MIR Fourier components via nonlinear parametric interaction. Vortex transfer functions $t(k_r, ϕ) \propto k_r^\ell e^{i\ellϕ}$ are precisely encoded on a phase-only spatial light modulator to enable tunable MIR differentiation from first- to fourth- order, with real-time switching at up to 60 Hz. Benefiting from a low-noise upconversion process and a single-photon-sensitive silicon camera, the system achieves high-contrast edge imaging under low-light conditions. Experimental results confirm accurate edge extraction and background suppression for both amplitude and phase objects, hence underscoring its potential for noninvasive diagnostics and label-free material analysis.

physics.optics↗