arXiv subjects

Jiangzhou Wang

Publications and source records attributed to Jiangzhou Wang.

At least 217 records · Page 12Linked to original sources

arXiv2021

Impact of Low-Resolution ADC on DOA Estimation Performance for Massive MIMO Receive Array

In this paper, we present a new scenario of direction of arrival (DOA) estimation using massive multiple-input multiple-output (MIMO) receive array with low-resolution analog-to-digital convertors (ADCs), which can strike a good balance between performance and circuit cost. Based on the linear additive quantization noise model (AQNM), the effect of low-resolution ADCs on the methods, such as Root-MUSIC method, is analyzed. Also, the closed-form expression of Cramer-Rao lower bound (CRLB) is derived to evaluate the performance loss caused by the low-resolution ADCs. The simulation results show that the Root-MUSIC methods can achieve the corresponding CRLB. Furthermore, 2-3 bits are acceptable for most applications if the 1dB performance loss.

cs.IT↗

arXiv2021

Fast Network Community Detection with Profile-Pseudo Likelihood Methods

The stochastic block model is one of the most studied network models for community detection. It is well-known that most algorithms proposed for fitting the stochastic block model likelihood function cannot scale to large-scale networks. One prominent work that overcomes this computational challenge is Amini et al.(2013), which proposed a fast pseudo-likelihood approach for fitting stochastic block models to large sparse networks. However, this approach does not have convergence guarantee, and is not well suited for small- or medium- scale networks. In this article, we propose a novel likelihood based approach that decouples row and column labels in the likelihood function, which enables a fast alternating maximization; the new method is computationally efficient, performs well for both small and large scale networks, and has provable convergence guarantee. We show that our method provides strongly consistent estimates of the communities in a stochastic block model. As demonstrated in simulation studies, the proposed method outperforms the pseudo-likelihood approach in terms of both estimation accuracy and computation efficiency, especially for large sparse networks. We further consider extensions of our proposed method to handle networks with degree heterogeneity and bipartite properties.

stat.ME↗

arXiv2021

Velocity-adaptive Access Scheme for MEC-assisted Platooning Networks: Access Fairness Via Data Freshness

Platooning strategy is an important part of autonomous driving technology. Due to the limited resource of autonomous vehicles in platoons, mobile edge computing (MEC) is usually used to assist vehicles in platoons to obtain useful information, increasing its safety. Specifically, vehicles usually adopt the IEEE 802.11 distributed coordination function (DCF) mechanism to transmit large amount of data to the base station (BS) through vehicle-to-infrastructure (V2I) communications, where the useful information can be extracted by the edge server connected to the BS and then sent back to the vehicles to make correct decisions in time. However, vehicles may be moving on different lanes with different velocities, which incurs the unfair access due to the characteristics of platoons, i.e., vehicles on different lanes transmit different amount of data to the BS when they pass through the coverage of the BS, which also results in the different amount of useful information received by various vehicles. Moreover, age of information (AoI) is an important performance metric to measure the freshness of the data. Large average age of data implies not receiving the useful information in time. It is necessary to design an access scheme to jointly optimize the fairness and data freshness. In this paper, we formulate a joint optimization problem in the MEC-assisted V2I networks and present a multi-objective optimization scheme to solve the problem through adjusting the minimum contention window under the IEEE 802.11 DCF mode according to the velocities of vehicles. The effectiveness of the scheme has been demonstrated by simulation.

cs.NI↗

arXiv2021

High-performance Passive Eigen-model-based Detectors of Single Emitter Using Massive MIMO Receivers

For a passive direction of arrival (DoA) measurement system using massive multiple input multiple output (MIMO), it is mandatory to infer whether the emitter exists or not before performing DOA estimation operation. Inspired by the detection idea from radio detection and ranging (radar), three high-performance detectors are proposed to infer the existence of single passive emitter from the eigen-space of sample covariance matrix of receive signal vector. The test statistic (TS) of the first method is defined as the ratio of maximum eigen-value (Max-EV) to minimum eigen-value (R-MaxEV-MinEV) while that of the second one is defined as the ratio of Max-EV to noise variance (R-MaxEV-NV). The TS of the third method is the mean of maximum eigen-value (EV) and minimum EV(M-MaxEV-MinEV). Their closed-form expressions are presented and the corresponding detection performance is given. Simulation results show that the proposed M-MaxEV-MinEV and R-MaxEV-NV methods can approximately achieve the same detection performance that is better than the traditional generalized likelihood ratio test method with false alarm probability being less than 0.3.

eess.SP↗

arXiv2021

Fast Ambiguous DOA Elimination Method of DOA Measurement for Hybrid Massive MIMO Receiver

DOA estimation for massive multiple-input multiple-output (MIMO) system can provide ultra-high-resolution angle estimation. However, due to the high computational complexity and cost of all digital MIMO systems, a hybrid analog digital (HAD) structure MIMO was proposed. In this paper, a fast ambiguous phase elimination method is proposed to solve the problem of direction-finding ambiguity caused by the HAD MIMO. Only two-data-blocks are used to realize DOA estimation. Simulation results show that the proposed method can greatly reduce the estimation delay with a slight performance loss.

cs.IT↗

arXiv2021

Reconfigurable Intelligent Surfaces for 6G Systems: Principles, Applications, and Research Directions

Reconfigurable intelligent surfaces (RISs) or intelligent reflecting surfaces (IRSs), are regarded as one of the most promising and revolutionizing techniques for enhancing the spectrum and/or energy efficiency of wireless systems. These devices are capable of reconfiguring the wireless propagation environment by carefully tuning the phase shifts of a large number of low-cost passive reflecting elements. In this article, we aim for answering four fundmental questions: 1) Why do we need RISs? 2) What is an RIS? 3) What are RIS's applications? 4) What are the relevant challenges and future research directions? In response, eight promising research directions are pointed out.

eess.SP↗

arXiv2021

Stable Nonlinear and IQ Imbalance RF Fingerprint for Wireless OFDM Devices

An estimation method of Radio Frequency fingerprint (RFF) based on the physical hardware properties of the nonlinearity and in-phase and quadrature (IQ) imbalance of the transmitter is proposed for the authentication of wireless orthogonal frequency division multiplexing (OFDM) devices. Firstly, the parameters of the nonlinearity of the transmitter and finite impulse response (FIR) of the wireless multipath channel are estimated with a Hammerstein system parameter separation technique. Secondly, the best IQ imbalance parameter combination estimation is obtained with a searching algorithm and the applied conjugate anti-symmetric pilots. Thirdly, the estimations of the nonlinear coefficients and IQ imbalance parameter combination are considered as a novel RFF, the features are extracted from the novel RFF, and a k-Nearest Neighbor (k-NN) classifier is used to classify the communication devices with the features. It is demonstrated with the numerical experiments of five transmitters that the novel RFF eliminates the adverse effect of the wireless channel and is therefore stable. The proposed RF fingerprinting method is helpful for the high-strength authentication of the OFDM communication devices with subtle differences from the same model and same series.

cs.IT↗

arXiv2021

Spatial Modulation: an Attractive Secure Solution to Future Wireless Network

As a green and secure wireless transmission method, secure spatial modulation (SM) is becoming a hot research area. Its basic idea is to exploit both the index of activated transmit antenna and amplitude phase modulation signal to carry messages, improve security, and save energy. In this paper, we review its crucial challenges: transmit antenna selection (TAS), artificial noise (AN) projection, power allocation (PA) and joint detection at the desired receiver. As the size of signal constellation tends to medium-scale or large-scale, the complexity of traditional maximum likelihood detector becomes prohibitive. To reduce this complexity, a low-complexity maximum likelihood (ML) detector is proposed. To further enhance the secrecy rate (SR) performance, a deep-neural-network (DNN) PA strategy is proposed. Simulation results show that the proposed low-complexity ML detector, with a lower-complexity, has the same bit error rate performance as the joint ML method while the proposed DNN method strikes a good balance between complexity and SR performance.

cs.IT↗

arXiv2021

UAV-Assisted and Intelligent Reflecting Surfaces-Supported Terahertz Communications

In this paper, unmanned aerial vehicles (UAVs) and intelligent reflective surface (IRS) are utilized to support terahertz (THz) communications. To this end, the joint optimization of UAV's trajectory, the phase shift of IRS, the allocation of THz sub-bands, and the power control is investigated to maximize the minimum average achievable rate of all the users. An iteration algorithm based on successive Convex Approximation with the Rate constraint penalty (CAR) is developed to obtain UAV's trajectory, and the IRS phase shift is formulated as a closed-form expression with introduced pricing factors. Simulation results show that the proposed scheme significantly enhances the rate performance of the whole system.

eess.SP↗

arXiv2021

Self-Sustainable Reconfigurable Intelligent Surface Aided Simultaneous Terahertz Information and Power Transfer (STIPT)

This paper proposes a new simultaneous terahertz (THz) information and power transfer (STIPT) system, which is assisted by reconfigurable intelligent surface (RIS) for both the information data and power transmission. We aim to maximize the information users' (IUs') data rate while guaranteeing the energy users' (EUs') and RIS's power harvesting requirements. To solve the formulated non-convex problem, the block coordinate descent (BCD) based algorithm is adopted to alternately optimize the transmit precoding of IUs, RIS's reflecting coefficients, and RIS's coordinate. The Penalty Constrained Convex Approximation (PCCA) Algorithm is proposed to solve the intractable optimization problem of the RIS's coordinate, where the solution's feasibility is guaranteed by the introduced penalties. Simulation results confirm that the proposed BCD algorithm can significantly enhance the performance of STIPT by employing RIS.

eess.SP↗

arXiv2021

Performance Comparison between Reconfigurable Intelligent Surface and Relays: Theoretical Methods and a Perspective from Operator

Reconfigurable intelligent surface (RIS) is an emerging technique employing metasurface to reflect the signal from the source node to the destination node without consuming any energy. Not only the spectral efficiency but also the energy efficiency can be improved through RIS. Essentially, RIS can be considered as a passive relay between the source and destination node. On the other hand, a relay node in a traditional relay network has to be active, which indicates that it will consume energy when it is relaying the signal or information between the source and destination nodes. In this paper, we compare the performances between RIS and active relay for a general multiple-input multiple-output (MIMO) system. To make the comparison fair and comprehensive, both the performances of RIS and active relay are optimized with best-effort. In terms of the RIS, transmit beamforming and reflecting coefficient at the RIS are jointly optimized so as to maximize the end-to-end throughput. Although the optimization problem is non-convex, it is transformed equivalently to a weighted mean-square error (MSE) minimization problem and an alternating optimization problem is proposed, which can ensure the convergence to a stationary point. In terms of active relay, both half duplex relay (HDR) and full duplex relay (FDR) are considered. End-to-end throughput is maximized via an alternating optimization method. Numerical results are presented to demonstrate the effectiveness of the proposed algorithm. Finally, comparisons between RIS and relays are investigated from the perspective of system model, performance, deployment and controlling method.

cs.IT↗

arXiv2020

Low-complexity and High-performance Receive Beamforming for Secure Directional Modulation Networks against an Eavesdropping-enabled Full-duplex Attacker

In this paper, we present a novel scenario for directional modulation (DM) networks with a full-duplex (FD) malicious attacker (Mallory), where Mallory can eavesdrop the confidential message from Alice to Bob and simultaneously interfere Bob by sending a jamming signal. Considering that the jamming plus noise at Bob is colored, an enhanced receive beamforming (RBF), whitening-filter-based maximum ratio combining (MRC) (WFMRC), is proposed. Subsequently, two RBFs of maximizing the secrecy rate (Max-SR) and minimum mean square error (MMSE) are presented to show the same performance as WFMRC. To reduce the computational complexity of conventional MMSE, a low-complexity MMSE is also proposed. Eventually, to completely remove the jamming signal from Mallory and transform the residual interference plus noise to a white one, a new RBF, null-space projection (NSP) based maximizing WF receive power, called NSP-based Max-WFRP, is also proposed. From simulation results, we find that the proposed Max-SR, WFMRC, and low-complexity MMSE have the same SR performance as conventional MMSE, and achieve the best performance while the proposed NSP-based Max-WFRP performs better than MRC in the medium and high signal-to-noise ratio regions. Due to its low-complexity,the proposed low-complexity MMSE is very attractive. More important, the proposed methods are robust to the change in malicious jamming power compared to conventional MRC.

cs.IT↗

arXiv2020

Time-dependent Performance Analysis of the 802.11p-based Platooning Communications Under Disturbance

Platooning is a critical technology to realize autonomous driving. Each vehicle in platoons adopts the IEEE 802.11p standard to exchange information through communications to maintain the string stability of platoons. However, one vehicle in platoons inevitably suffers from a disturbance resulting from the leader vehicle acceleration/deceleration, wind gust and uncertainties in a platoon control system, i.e., aerodynamics drag and rolling resistance moment etc. Disturbances acting on one vehicle may inevitably affect the following vehicles and cause that the spacing error is propagated or even amplified downstream along the platoon, i.e., platoon string instability. In this case, the connectivity among vehicles is dynamic, resulting in the performance of 802.11p in terms of packet delay and packet delivery ratio being time-varying. The effect of the string instability would be further deteriorated once the time-varying performance of 802.11p cannot satisfy the basic communication requirement. Unlike the existing works which only analyze the steady performance of 802.11p in vehicular networks, we will focus on the impact of disturbance and construct models to analyze the time-dependent performance of 802.11p-based platooning communications. The effectiveness of the models is validated through simulation results. Moreover, the time-dependent performance of 802.11p is analyzed through numerical results and it is validated that 802.11p is able to satisfy the communication requirement under disturbance.

cs.NI↗

arXiv2020

Enhanced RSS-based UAV Localization via Trajectory and Multi-base Stations

To improve the localization precision of unmanned aerial vehicle (UAV), a novel framework is established by jointly utilizing multiple measurements of received signal strength (RSS) from multiple base stations (BSs) and multiple points on trajectory. First, a joint maximum likelihood (ML) of exploiting both trajectory information and multi-BSs is proposed. To reduce its high complexity, two low-complexity localization methods are designed. The first method is from BS to trajectory (BST), called LCSL-BST. First, fixing the nth BS, by exploiting multiple measurements along trajectory, the position of UAV is computed by ML rule. Finally, all computed positions of UAV for different BSs are combined to form the resulting position. The second method reverses the order, called LCSL-TBS. We also derive the Cramer-Rao lower boundary (CRLB) of the joint ML method. From simulation results, we can see that the proposed joint ML and separate LCSL-BST methods have made a significant improvement over conventional ML method without use of trajectory knowledge in terms of location performance. The former achieves the joint CRLB and the latter is of low-complexity.

eess.SP↗

arXiv2020

Sum Rate Maximization for Intelligent Reflecting Surface Assisted Terahertz Communications

In this paper, an intelligent reflecting surface (IRS) is deployed to assist the terahertz (THz) communications. The molecular absorption causes path loss peaks to appear in the THz frequency band, and the fading peak is greatly affected by the transmission distance. In this paper, we aim to maximize the sum rate with individual rate constraints, in which the IRS location, IRS phase shift, the allocation of sub-bands of the THz spectrum, and power control for UEs are jointly optimized. For the special case of a single user equipment (UE) with a single sub-band, the globally optimal solution is provided. For the general case with multiple UEs, the block coordinate searching (BCS) based algorithm is proposed to solve the non-convex problem. Simulation results show that the proposed scheme can significantly enhance system performance.

cs.IT↗

arXiv2020

Enhanced Secrecy Rate Maximization for Directional Modulation Networks via IRS

Intelligent reflecting surface (IRS) is of low-cost and energy-efficiency and will be a promising technology for the future wireless communications like sixth generation. To address the problem of conventional directional modulation (DM) that Alice only transmits single confidential bit stream (CBS) to Bob with multiple antennas in a line-of-sight channel, IRS is proposed to create friendly multipaths for DM such that two CBSs can be transmitted from Alice to Bob. This will significantly enhance the secrecy rate (SR) of DM. To maximize the SR (Max-SR), a general non-convex optimization problem is formulated with the unit-modulus constraint of IRS phase-shift matrix (PSM), and the general alternating iterative (GAI) algorithm is proposed to jointly obtain the transmit beamforming vectors (TBVs) and PSM by alternately optimizing one and fixing another. To reduce its high complexity, a low-complexity iterative algorithm for Max-SR is proposed by placing the constraint of null-space (NS) on the TBVs, called NS projection (NSP). Here, each CBS is transmitted separately in the NSs of other CBS and AN channels. Simulation results show that the SRs of the proposed GAI and NSP can approximately double that of IRS-based DM with single CBS for massive IRS in the high signal-to-noise ratio region.

cs.IT↗

arXiv2020

Cost Minimization for Cooperative Computation Framework in MEC Networks

In this paper, a cooperative task computation framework exploits the computation resource in UEs to accomplish more tasks meanwhile minimizes the power consumption of UEs. The system cost includes the cost of UEs' power consumption and the penalty of unaccomplished tasks and the system cost is minimized by jointly optimizing binary offloading decisions, the computational frequencies, and the offloading transmit power. To solve the formulated mixed-integer non-linear programming problem, three efficient algorithms are proposed, i.e., integer constraints relaxation-based iterative algorithm (ICRBI), heuristic matching algorithm, and the decentralized algorithm. The ICRBI algorithm achieves the best performance at the cost of the highest complexity, while the heuristic matching algorithm significantly reduces the complexity while still providing reasonable performance. As the previous two algorithms are centralized, the decentralized algorithm is also provided to further reduce the complexity, and it is suitable for the scenarios that cannot provide the central controller. The simulation results are provided to validate the performance gain in terms of the total system cost obtained by the proposed cooperative computation framework.

cs.IT↗

arXiv2020

Efficient Receive Beamformers for Secure Spatial Modulation against a Malicious Full-duplex Attacker with Eavesdropping Ability

In this paper, we consider a new secure spatial modulation scenario with a full-duplex (FD) malicious attacker Mallory owning eavesdropping capacity, where Mallory works on FD model and transmits a malicious jamming such as artificial noise (AN) to interfere with Bob. To suppress the malicious jamming on Bob from Mallory, a conventional maximum receive power (Max-RP) at Bob is presented firstly. Subsequently, to exploit the colored property of noise plus interference at Bob, a whitening-filter-based Max-RP (Max-WFRP) is proposed with an obvious performance enhancement over Max-RP. To completely remove the malicious jamming from Mallory, a Max-RP with a constraint of forcing the malicious jamming from Mallory to zero at Bob is proposed. To further improve secrecy rate (SR) by removing the ZF contraint (ZFC), the maximum signal-to-jamming-plus-noise ratio (Max-SJNR) is proposed. Our proposed methods have closed-form expressions. From simulation results, the four receive beamforming methods have an increasing order in performance: Max-RP, Max-RP with ZFC and Max-SJNR$\approx$Max-WFRP. Additionally, the latter two harvest a substantial performance gains over Max-RP and Max-RP with ZFC in the low and medium signal-to-noise ratio regions.

cs.IT↗