Searcharxiv⌕ Search

arXiv subjects

Jiangzhou Wang

Publications and source records attributed to Jiangzhou Wang.

At least 199 records · Page 11Linked to original sources

Mobility-Aware Cooperative Caching in Vehicular Edge Computing Based on Asynchronous Federated and Deep Reinforcement Learning

The vehicular edge computing (VEC) can cache contents in different RSUs at the network edge to support the real-time vehicular applications. In VEC, owing to the high-mobility characteristics of vehicles, it is necessary to cache the user data in advance and learn the most popular and interesting contents for vehicular users. Since user data usually contains privacy information, users are reluctant to share their data with others. To solve this problem, traditional federated learning (FL) needs to update the global model synchronously through aggregating all users' local models to protect users' privacy. However, vehicles may frequently drive out of the coverage area of the VEC before they achieve their local model trainings and thus the local models cannot be uploaded as expected, which would reduce the accuracy of the global model. In addition, the caching capacity of the local RSU is limited and the popular contents are diverse, thus the size of the predicted popular contents usually exceeds the cache capacity of the local RSU. Hence, the VEC should cache the predicted popular contents in different RSUs while considering the content transmission delay. In this paper, we consider the mobility of vehicles and propose a cooperative Caching scheme in the VEC based on Asynchronous Federated and deep Reinforcement learning (CAFR). We first consider the mobility of vehicles and propose an asynchronous FL algorithm to obtain an accurate global model, and then propose an algorithm to predict the popular contents based on the global model. In addition, we consider the mobility of vehicles and propose a deep reinforcement learning algorithm to obtain the optimal cooperative caching location for the predicted popular contents in order to optimize the content transmission delay. Extensive experimental results have demonstrated that the CAFR scheme outperforms other baseline caching schemes.

cs.DC↗

An IRS Backscatter Enabled Integrated Sensing, Communication and Computation System

This paper proposes to leverage intelligent reflecting surface (IRS) backscatter to realize radio-frequency-chain-free uplink-transmissions (RFCF-UT). In this communication paradigm, IRS works as an information carrier, whose elements are capable of adjusting their amplitudes and phases to collaboratively portray an electromagnetic image like a dynamic quick response (QR) code, rather than a familiar reflection device, while a full-duplex base station (BS) is used as a scanner to collect and recognize the information on IRS. To elaborate it, an integrated sensing, communication and computation system as an example is presented, in which a dual-functional radar-communication BS simultaneously detects the target and collects the data from user equipments each connected to an IRS. Based on the established model, partial and binary data offloading strategies are respectively considered. By defining a performance metric named weighted throughput capacity (WTC), two maximization problems of WTC are formulated. According to the coupling degree of optimization variables in the objective function and the constraints, each optimization problem is firstly decomposed into two subproblems. Then, the methods of linear programming, fractional programming, integer programming and alternative optimization are developed to solve the subproblems. The simulation results demonstrate the achievable WTC of the considered system, thereby validating RFCF-UT.

eess.SP↗

Low-complexity Joint Phase Adjustment and Receive Beamforming for Directional Modulation Networks via IRS

Intelligent reflecting surface (IRS) is a revolutionary and low-cost technology for boosting the spectrum and energy efficiencies in future wireless communication network. In order to create controllable multipath transmission in the conventional line-of-sight (LOS) wireless communication environment, an IRS-aided directional modulation (DM) network is considered. In this paper, to improve the transmission security of the system and maximize the receive power sum (Max-RPS), two alternately optimizing schemes of jointly designing receive beamforming (RBF) vectors and IRS phase shift matrix (PSM) are proposed: Max-RPS using general alternating optimization (Max-RPS-GAO) algorithm and Max-RPS using zero-forcing (Max-RPS-ZF) algorithm. Simulation results show that, compared with the no-IRS-assisted scheme and the no-PSM optimization scheme, the proposed IRS-assisted Max-RPS-GAO method and Max-RPS-ZF method can significantly improve the secrecy rate (SR) performance of the DM system. Moreover, compared with the Max-RPS-GAO method, the proposed Max-RPS-ZF method has a faster convergence speed and a certain lower computational complexity.

cs.IT↗

Phase Optimization for Massive IRS-aided Two-way Relay Network

In this paper, with the help of an intelligent reflecting surface (IRS), the source (S) and destination (D) exchange information through the two-way decode-and-forward relay (TW-DFR). We mainly focus on the phase optimization of IRS to improve the system rate performance. Firstly, a maximizing receive power sum (Max-RPS) method is proposed via eigenvalue decomposition (EVD) with an appreciable rate enhancement, which is called Max-RPS-EVD. To further achieve a higher rate, a method of maximizing minimum rate (Max-Min-R) is proposed with high complexity. To reduce its complexity, a low-complexity method of maximizing the sum rate (Max-SR) via general power iterative (GPI) is proposed, which is called Max-SR-GPI. Simulation results show that the proposed three methods outperform the case of random phase method, especially the proposed Max-SR-GPI method is the best one achieving at least 20\% rate gain over random phase. Additionally, it is also proved the optimal rate can be achieved when TW-DFR and IRS are located in the middle of S and D.

cs.IT↗

Performance Analysis of Wireless Network Aided by Discrete-Phase-Shifter IRS

Discrete phase shifters of intelligent reflecting surface (IRS) generates phase quantization error (QE) and degrades the receive performance at the receiver. To make an analysis of the performance loss caused by IRS with phase QE, based on the law of large numbers, the closed-form expressions of signal-to-noise ratio (SNR) performance loss (PL), achievable rate (AR), and bit error rate (BER) are successively derived under line-of-sight (LoS) channels and Rayleigh channels. Moreover, based on the Taylor series expansion, the approximate simple closed form of PL of IRS with approximate QE is also given. The simulation results show that the performance losses of SNR and AR decrease as the number of quantization bits increase, while they gradually increase with the number of IRS phase shifter elements increase. Regardless of LoS channels or Rayleigh channels, when the number of quantization bits is larger than or equal to 3, the performance losses of SNR and AR are less than 0.23dB and 0.08bits/s/Hz, respectively, and the BER performance degradation is trivial. In particular, the performance loss difference between IRS with QE and IRS with approximate QE is negligible when the number of quantization bits is not less than 2.

cs.IT↗

Beamforming Design for IRS-Aided Decode-and-Forward Relay Wireless Network

As a low-cost and low-power-consumption passive reflector, intelligent reflecting surface (IRS) can make a significant rate improvement by building a programmable wireless environment. To improve the rate performance and coverage range of wireless networks, an IRS-aided decode-and-forward (DF) relay network is proposed with multiple antennas at relay station (RS). To achieve a high rate, an alternately iterative structure (AIS) of maximizing receive power (Max-RP) at RS is proposed to jointly optimize the beamforming vectors at RS and phase shifts at IRS. Considering its high-complexity, two low-complexity Max-RP schemes of null-space projection (NSP) plus maximum ratio combining (MRC) and IRS element selection (IRSES) plus MRC are presented to reduce this complexity, respectively. For the former, NSP is used to separate the reflected signal from IRS and the direct transmitted signal from source and MRC is adopted to combine the two signals at RS. For the latter, the basic concept of IRSES is as follows: IRS is partitioned into M subsets of elements and adjusting the phases of all elements per subset make all reflected signals and the direct signal from source phase alignment (PA) at the corresponding antenna of relay. Simulation results show that the proposed three methods perform much better than the existing network with single-antenna relay in terms of rate performance. In particular, a 85% rate gain over existing scheme is achieved in the high signal-to-noise ratio region. Moreover, it is verified that the positions of RS and IRS have a substantial impact on rate performance, and there exists an optimal positions of RS and IRS.

cs.IT↗

Power Allocation for IRS-aided Two-way Decode-and-Forward Relay Wireless Network

In this paper, an intelligent reflecting surface (IRS)-aided two-way decode-and-forward (DF) relay wireless network is considered, where two users exchange information via IRS and DF relay. To enhance the sum rate performance, three power allocation (PA) strategies are proposed. Firstly, a method of maximizing sum rate (Max-SR) is proposed to jointly optimize the PA factors of user U1, user U2 and relay station (RS). To further improve the sum rate performance, two high-performance schemes, namely maximizing minimum sum rate (Max-Min-SR) and maximizing sum rate with rate constraint (Max-SR-RC), are presented. Simulation results show that the proposed three methods outperform the equal power allocation (EPA) method in terms of sum rate performance. In particular, the highest performance gain achieved by Max-SR-RC method is up to 45.2% over EPA. Furthermore, it is verified that the total power and random shadow variable Xσ have a substantial impact on the sum rate performance.

cs.IT↗

Pilot Optimization and Channel Estimation for Two-way Relaying Network Aided by IRS with Finite Discrete Phase Shifters

In this paper, we investigate the problem of pilot optimization and channel estimation of two-way relaying network (TWRN) aided by an intelligent reflecting surface (IRS) with finite discrete phase shifters. In a TWRN, there exists a challenging problem that the two cascading channels from source-to-IRS-to-Relay and destination-to-IRS-to-relay interfere with each other. Via designing the initial phase shifts of IRS and pilot pattern, the two cascading channels are separated by using simple arithmetic operations like addition and subtraction. Then, the least-squares estimator is adopted to estimate the two cascading channels and two direct channels from source to relay and destination to relay. The corresponding mean square errors (MSE) of channel estimators are derived. By minimizing MSE, the optimal phase shift matrix of IRS is proved. Then, two special matrices Hadamard and discrete Fourier transform (DFT) matrix is shown to be two optimal training matrices for IRS. Furthermore, the IRS with discrete finite phase shifters is taken into account. Using theoretical derivation and numerical simulations, we find that 3-4 bits phase shifters are sufficient for IRS to achieve a negligible MSE performance loss. More importantly, the Hadamard matrix requires only one-bit phase shifters to achieve the optimal MSE performance while the DFT matrix requires at least three or four bits to achieve the same performance. Thus, the Hadamard matrix is a perfect choice for channel estimation using low-resolution phase-shifting IRS.

cs.IT↗

Beamforming and Power Allocation for Double-RIS-aided Two-way Directional Modulation Network

To improve the information exchange rate between Alice and Bob in traditional two-way directional modulation (TWDM) network, a new double-reconfigurable intelligent surface (RIS)-aided TWDM network is proposed. To achieve the low-complexity transmitter design, two analytical precoders, one closed-form method of adjusting the RIS phase-shifting matrices, and semi-iterative power allocation (PA) strategy of maximizing secrecy sum rate (SSR) are proposed. First, the geometric parallelogram (GPG) criterion is employed to give the phase-shifting matrices of RISs. Then, two precoders, called maximizing singular value (Max-SV) and maximizing signal-to-leakage-noise ratio (Max-SLNR), are proposed to enhance the SSR. Evenly, the maximizing SSR PA with hybrid iterative closed-form (HICF) is further proposed to improve the SSR and derived to be one root of a sixth-order polynomial computed by: (1) the Newton-Raphson algorithm is repeated twice to reduce the order of the polynomial from six to four; (2) the remaining four feasible solutions can be directly obtained by the Ferrari's method. Simulation results show that using the proposed Max-SV and Max-SLNR, the proposed GPG makes a significant SSR improvement over random phase and no RIS. Given GPG, the proposed Max-SV outperforms the proposed leakage for small-scale or medium-scale RIS. Particularly, the proposed HICF PA stragey shows about ten percent performance gain over equal PA.

cs.IT↗

On Performance Loss of DOA Measurement Using Massive MIMO Receiver with Mixed-ADCs

High hardware cost and high power consumption of massive multiple-input and multiple output (MIMO) are two challenges for the future wireless communications including beyond fifth generation (B5G) and sixth generation (6G). Adopting the low-resolution analog-to-digital converter (ADC) is viewed as a promising solution. Additionally, the direction of arrival (DOA) estimation is an indispensable technology for beam alignment and tracking in massive MIMO systems. Thus, in this paper, the performance of DOA estimation with mixed-ADC structure is firstly investigated. The Cramer-Rao lower bound (CRLB) for this architecture is derived based on the additive quantization noise model. Eventually, a performance loss factor and the associated energy efficiency factor is defined for analysis in detail. Simulation results show that the mixed-ADC architecture can strike a good balance among performance loss, circuit cost and energy efficiency. More importantly, just a few bits (up to 4 bits) of low-resolution ADCs can achieve a satisfactory performance for DOA measurement.

cs.IT↗

Multi-RIS Aided 3D Secure Precise Wireless Transmission

In this paper, multiple reconfigurable intelligent surfaces (RIS) aided secure precise wireless transmission (SPWT) schemes are proposed in the three-dimensional (3D) wireless communication scenario. Unavailable direct path channels from transmitter to receivers are considered when the direct paths are obstructed by obstacles. Then, multiple RISs are utilized to achieve SPWT through the reflection path among transmitter, RISs and receivers in order to enhance the communication performance and energy efficiency simultaneously. First, a maximum-signal-to-interference-and-noise ratio (MSINR) scheme is proposed in a single user scenario. Then, the multi-user scenario is considered where the illegitimate users are regarded as eavesdroppers. A maximum-secrecy-rate (MSR) scheme and a maximum-signal-to-leakage-and-noise ratio (MSLNR) are proposed. The former achieves a better secrecy rate (SR) performance but incurs a higher complexity. The latter has a lower complexity than the MSR scheme with an SR performance loss. Simulation results show that both single-user scheme and multi-user scheme can achieve SPWT which transmits confidential message precisely to location of desired users. Moreover, MSLNR scheme has a lower complexity than the MSR scheme, while the SR performance is close to that of the MSR scheme.

eess.SP↗

Physical Layer Security Techniques for Future Wireless Networks

The broadcast nature of wireless communication systems makes wireless transmission extremely susceptible to eavesdropping and even malicious interference. Physical layer security technology can effectively protect the private information sent by the transmitter from being listened to by illegal eavesdroppers, thus ensuring the privacy and security of communication between the transmitter and legitimate users. The development of mobile communication presents new challenges to physical layer security research. This paper provides a comprehensive survey of the physical layer security research on various promising mobile technologies, including directional modulation (DM), spatial modulation (SM), covert communication, intelligent reflecting surface (IRS)-aided communication, and so on. Finally, future trends and the unresolved technical challenges are summarized in physical layer security for mobile communications.

cs.CR↗

Decentralized Power Allocation for MIMO-NOMA Vehicular Edge Computing Based on Deep Reinforcement Learning

Vehicular edge computing (VEC) is envisioned as a promising approach to process the explosive computation tasks of vehicular user (VU). In the VEC system, each VU allocates power to process partial tasks through offloading and the remaining tasks through local execution. During the offloading, each VU adopts the multi-input multi-out and non-orthogonal multiple access (MIMO-NOMA) channel to improve the channel spectrum efficiency and capacity. However, the channel condition is uncertain due to the channel interference among VUs caused by the MIMO-NOMA channel and the time-varying path-loss caused by the mobility of each VU. In addition, the task arrival of each VU is stochastic in the real world. The stochastic task arrival and uncertain channel condition affect greatly on the power consumption and latency of tasks for each VU. It is critical to design an optimal power allocation scheme considering the stochastic task arrival and channel variation to optimize the long-term reward including the power consumption and latency in the MIMO-NOMA VEC. Different from the traditional centralized deep reinforcement learning (DRL)-based scheme, this paper constructs a decentralized DRL framework to formulate the power allocation optimization problem, where the local observations are selected as the state. The deep deterministic policy gradient (DDPG) algorithm is adopted to learn the optimal power allocation scheme based on the decentralized DRL framework. Simulation results demonstrate that our proposed power allocation scheme outperforms the existing schemes.

cs.NI↗

RIS-Aided D2D Communications Relying on Statistical CSI with Imperfect Hardware

In this letter, we investigate a reconfigurable intelligent surfaces (RIS)-aided device to device (D2D) communication system over Rician fading channels with imperfect hardware including both hardware impairment at the transceivers and phase noise at the RISs. This paper has optimized the phase shift by a genetic algorithm (GA) method to maximize the achievable rate for the continuous phase shifts (CPSs) and discrete phase shifts (DPSs). We also consider the two special cases of no RIS hardware impairments (N-RIS-HWIs) and no transceiver hardware impairments (N-T-HWIs). We present closed-form expressions for the achievable rate of different cases and study the impact of hardware impairments on the communication quality. Finally, simulation results validate the analytic work.

eess.SP↗

Autoencoder-based Semantic Communication Systems with Relay Channels

In this letter, we propose a semantic communication scheme for wireless relay channels based on Autoencoder, named AESC, which encodes and decodes sentences from the semantic dimension. The Autoencoder module provides anti-noise performance for the system. Meanwhile, a novel semantic forward (SF) mode is designed for the relay node to forward the semantic information at the semantic level, especially for the scenarios that there is no common knowledge shared between the source and destination nodes. Numerical results show that the AESC achieves better stability performance than the traditional communication schemes, and the proposed SF mode provides a significant performance gain compared to the traditional forward protocols.

cs.IT↗

High-performance Estimation of Jamming Covariance Matrix for IRS-aided Directional Modulation Network with a Malicious Attacker

In this paper, we investigate the anti-jamming problem of a directional modulation (DM) system with the aid of intelligent reflecting surface (IRS). As an efficient tool to combat malicious jamming, receive beamforming (RBF) is usually designed to be on null-space of jamming channel or covariance matrix from Mallory to Bob. Thus, it is very necessary to estimate the receive jamming covariance matrix (JCM) at Bob. To achieve a precise JCM estimate, three JCM estimation methods, including eigenvalue decomposition (EVD), parametric estimation method by gradient descend (PEM-GD) and parametric estimation method by alternating optimization (PEM-AO), are proposed. Here, the proposed EVD is under rank-2 constraint of JCM. The PEM-GD method fully explores the structure features of JCM and the PEM-AO is to decrease the computational complexity of the former via dimensionality reduction. The simulation results show that in low and medium jamming-noise ratio (JNR) regions, the proposed three methods perform better than the existing sample covariance matrix method. The proposed PEM-GD and PEM-AO outperform EVD method and existing clutter and disturbance covariance estimator RCML.

cs.IT↗

Beamforming and Transmit Power Design for Intelligent Reconfigurable Surface-aided Secure Spatial Modulation

Intelligent reflecting surface (IRS) is a promising solution to build a programmable wireless environment for future communication systems, in which the reflector elements steer the incident signal in fully customizable ways by passive beamforming. In this paper, an IRS-aided secure spatial modulation (SM) is proposed, where the IRS perform passive beamforming and information transfer simultaneously by adjusting the on-off states of the reflecting elements. We formulate an optimization problem to maximize the average secrecy rate (SR) by jointly optimizing the passive beamforming at IRS and the transmit power at transmitter under the consideration that the direct pathes channels from transmitter to receivers are obstructed by obstacles. As the expression of SR is complex, we derive a newly fitting expression (NASR) for the expression of traditional approximate SR (TASR), which has simpler closed-form and more convenient for subsequent optimization. Based on the above two fitting expressions, three beamforming methods, called maximizing NASR via successive convex approximation (Max-NASR-SCA), maximizing NASR via dual ascent (Max-NASR-DA) and maximizing TASR via semi-definite relaxation (Max-TASR-SDR) are proposed to improve the SR performance. Additionally, two transmit power design (TPD) methods are proposed based on the above two approximate SR expressions, called Max-NASR-TPD and Max-TASR-TPD. Simulation results show that the proposed Max-NASR-DA and Max-NASR-SCA IRS beamformers harvest substantial SR performance gains over Max-TASR-SDR. For TPD, the proposed Max-NASR-TPD performs better than Max-TASR-TPD. Particularly, the Max-NASR-TPD has a closed-form solution.

cs.IT↗

Estimation of Covariance Matrix of Interference for Secure Spatial Modulation against a Malicious Full-duplex Attacker

In a secure spatial modulation with a malicious full-duplex attacker, how to obtain the interference space or channel state information (CSI) is very important for Bob to cancel or reduce the interference from Mallory. In this paper, different from existing work with a perfect CSI, the covariance matrix of malicious interference (CMMI) from Mallory is estimated and is used to construct the null-space of interference (NSI). Finally, the receive beamformer at Bob is designed to remove the malicious interference using the NSI. To improve the estimation accuracy, a rank detector relying on Akaike information criterion (AIC) is derived. To achieve a high-precision CMMI estimation, two methods are proposed as follows: principal component analysis-eigenvalue decomposition (PCA-EVD), and joint diagonalization (JD). The proposed PCA-EVD is a rank deduction method whereas the JD method is a joint optimization method with improved performance in low signal to interference plus noise ratio (SINR) region at the expense of increased complexities. Simulation results show that the proposed PCA-EVD performs much better than the existing method like sample estimated covariance matrix (SCM) and EVD in terms of normalized mean square error (NMSE) and secrecy rate (SR). Additionally, the proposed JD method has an excellent NMSE performance better than PCA-EVD in the low SINR region (SINR < 0dB) while in the high SINR region PCA-EVD performs better than JD.

cs.IT↗