arXiv subjects

Jiangzhou Wang

Publications and source records attributed to Jiangzhou Wang.

At least 109 records · Page 6Linked to original sources

arXiv2025

DNN-based Enhanced DOA Sensing via Massive MIMO Receiver with Switches-based Hybrid Architecture

Switches-based hybrid architecture has attracted much attention, especially in directional-of-arrival (DOA) sensing, due to its ability of significantly reducing the hardware cost by compressing massive multiple-input multiple-output (MIMO) arrays with switching networks. However, this structure will lead to a degradation in the degrees of freedom (DOF) and accuracy of DOA estimation. To address these two issues, we first propose a switches-based sparse hybrid array (SW-SHA). In this method, we design a dynamic switching network to form a synthesized sparse array, i.e., SW-SHA, that can enlarge the virtual aperture obtained by the difference co-array, thereby significantly enhancing the DOF. Second, in order to improve the DOA estimation accuracy of switches-based hybrid arrays, a deep neural network (DNN)-based method called ASN-DNN is proposed. It includes an antenna selection network (ASN) for optimizing the switch connections based on the criterion of minimizing the Cramer-Rao lower bound (CRLB) under the peak sidelobe level (PSL) constraint and a DNN for DOA estimation. Then by integrating ASN and DNN into an iterative process, the ASN-DNN is obtained. Furthermore, the closed-form expression of CRLB for DOA estimation is derived to evaluate the performance lower bound of switches-based hybrid arrays and provide a benchmark for ASN-DNN. The simulation results show the proposed ASN-DNN can achieve a greater performance than traditional methods, especially in the low signal-to-noise ratio (SNR) regions.

eess.SP↗

arXiv2025

Effective DoF-Oriented Optimal Antenna Spacing in Near-Field XL-MIMO Systems

This letter investigates the optimal antenna spacing for a near-field XL-MIMO communication system from the perspective of the array gain. Specifically, using the Green's function-based channel model, the letter analyzes the channel capacity, which is related to the effective degrees-of-freedom (EDoF). Then, the letter further investigates the applicability of two EDoF estimation methods. To increase EDoF, this letter focuses on analyzing the impact of antenna spacing. Furthermore, from the perspective of the array gain, the letter derives an approximate closed-form expression of the optimal antenna spacing, at which EDoF is maximized and the array gain at the antenna nearest to the focused antenna of the transmit array becomes zero. Finally, numerical results verify the main results of this letter.

eess.SP↗

arXiv2025

RIS-Aided Integrated Sensing and Communication Systems under Dual-polarized Channels

This paper considers reconfigurable intelligent surface (RIS)-aided integrated sensing and communication (ISAC) systems under dual-polarized (DP) channels. Unlike the existing ISAC systems, which ignored polarization of electromagnetic waves, this study adopts DP base station (BS) and DP RIS to serve users with a pair of DP antennas. The achievable sum rate is maximized through jointly optimizing the beamforming matrix at the DP BS, and the reflecting coefficients at the DP RIS. To address this problem, we first utilize the weighted minimum mean-square error (WMMSE) method to transform the objective function into a more tractable form, and then an alternating optimization (AO) method is employed to decouple the original problem into two subproblems. Due to the constant modulus constraint, the DP RIS reflection matrix optimization problem is addressed by the majorization-minimization (MM) method. For the DP beamforming matrix, we propose a penalty-based algorithm that can obtain a low-complexity closed-form solution. Simulation results validate the advantage of deploying DP transmit array and DP RIS in the considered ISAC systems.

cs.IT↗

arXiv2024

Two-Timescale Design for AP Mode Selection of Cooperative ISAC Networks

As an emerging technology, cooperative bi-static integrated sensing and communication (ISAC) is promising to achieve high-precision sensing, high-rate communication as well as self-interference (SI) avoidance. This paper investigates the two-timescale design for access point (AP) mode selection to realize the full potential of the cooperative bi-static ISAC network with low system overhead, where the beamforming at the APs is adapted to the rapidly-changing instantaneous channel state information (CSI), while the AP mode is adapted to the slowly-changing statistical CSI. We first apply the minimum mean square error (MMSE) estimator to estimate the channel between the APs and the channels from the APs to the user equipments (UEs). Then we adopt the low-complexity maximum ratio transmission (MRT) beamforming and the maximum ratio combining (MRC) detector, and derive the closed-form expressions of the communication rate and the sensing signal-to-interference-plus-noise-ratio (SINR). We formulate a non-convex integer optimization problem to maximize the minimum sensing SINR under the communication quality of service (QoS) constraints. McCormick envelope relaxation and successive convex approximation (SCA) techniques are applied to solve the challenging non-convex integer optimization problem. Simulation results validate the closed-form expressions and prove the convergence and effectiveness of the proposed AP mode selection scheme.

eess.SP↗

arXiv2024

Cooperative ISAC-empowered Low-Altitude Economy

This paper proposes a cooperative integrated sensing and communication (ISAC) scheme for the low-altitude sensing scenario, aiming at estimating the parameters of the unmanned aerial vehicles (UAVs) and enhancing the sensing performance via cooperation. The proposed scheme consists of two stages. In Stage I, we formulate the monostatic parameter estimation problem via using a tensor decomposition model. By leveraging the Vandermonde structure of the factor matrix, a spatial smoothing tensor decomposition scheme is introduced to estimate the UAVs' parameters. To further reduce the computational complexity, we design a reduced-dimensional (RD) angle of arrival (AoA) estimation algorithm based on generalized Rayleigh quotient (GRQ). In Stage II, the positions and true velocities of the UAVs are determined through the data fusion across multiple base stations (BSs). Specifically, we first develop a false removing minimum spanning tree (MST)-based data association method to accurately match the BSs' parameter estimations to the same UAV. Then, a Pareto optimality method and a residual weighting scheme are developed to facilitate the position and velocity estimation, respectively. We further extend our approach to the dual-polarized system. Simulation results validate the effectiveness of the proposed schemes in comparison to the conventional techniques.

eess.SP↗

arXiv2024

Two-way Node Popularity Model for Directed and Bipartite Networks

There has been extensive research on community detection in directed and bipartite networks. However, these studies often fail to consider the popularity of nodes in different communities, which is a common phenomenon in real-world networks. To address this issue, we propose a new probabilistic framework called the Two-Way Node Popularity Model (TNPM). The TNPM also accommodates edges from different distributions within a general sub-Gaussian family. We introduce the Delete-One-Method (DOM) for model fitting and community structure identification, and provide a comprehensive theoretical analysis with novel technical skills dealing with sub-Gaussian generalization. Additionally, we propose the Two-Stage Divided Cosine Algorithm (TSDC) to handle large-scale networks more efficiently. Our proposed methods offer multi-folded advantages in terms of estimation accuracy and computational efficiency, as demonstrated through extensive numerical studies. We apply our methods to two real-world applications, uncovering interesting findings.

stat.ME↗

arXiv2024

A Novel RFID Authentication Protocol Based on A Block-Order-Modulus Variable Matrix Encryption Algorithm

In this paper, authentication for mobile radio frequency identification (RFID) systems with low-cost RFID sensor tags is studied. Firstly, an adaptive modulus (AM) encryption algorithm is proposed. Subsequently, in order to enhance the security without additional storage of new key matrices, a self-updating encryption order (SUEO) algorithm is designed. Furthermore, a diagonal block local transpose key matrix (DBLTKM) encryption algorithm is presented, which effectively expands the feasible domain of the key space. Based on the above three algorithms, a novel joint AM-SUEO-DBLTKM encryption algorithm is constructed. Making full use of the advantages of the proposed joint algorithm, a two-way RFID authentication protocol, named AM-SUEO-DBLTKM-RFID, is proposed for mobile RFID systems. In addition, the Burrows-Abadi-Needham (BAN) logic and security analysis indicate that the proposed AM-SUEO-DBLTKM-RFID protocol can effectively combat various typical attacks. Numerical results demonstrate that the proposed AM-SUEO-DBLTKM algorithm can save 99.59% of tag storage over traditional algorithms. Finally, the low computational complexity as well as the low storage cost of the proposed AM-SUEO-DBLTKM-RFID protocol facilitates deployment within low-cost RFID sensor tags.

cs.CR↗

arXiv2024

Hybrid Precoding with Per-Beam Timing Advance for Asynchronous Cell-free mmWave Massive MIMO-OFDM Systems

Cell-free massive multiple-input-multiple-output (CF-mMIMO) is regarded as one of the promising technologies for next-generation wireless networks. However, due to its distributed architecture, geographically separated access points (APs) jointly serve a large number of user-equipments (UEs), there will inevitably be a discrepancies in the arrival time of transmitted signals. In this paper, we investigate millimeter-wave (mmWave) CF-mMIMO orthogonal frequency division multiplexing (OFDM) systems with asynchronous reception in a wide area coverage scenario, where asynchronous timing offsets may extend far beyond the cyclic prefix (CP) range. A comprehensive asynchronous beam-domain signal transmission model is presented for mmWave CF-mMIMO-OFDM systems in both downlink and uplink, incorporating phase offset, inter-carrier interference (ICI) and inter-symbol interference (ISI). To address the issue of asynchronous reception, we propose a novel per-beam timing advance (PBTA) hybrid precoding architecture and analyze the spectral efficiency (SE) in the beam domain for downlink and uplink asynchronous receptions. Both scalable centralized and distributed implementations are taken into account, and the asynchronous delay phase is utilized to design precoding/combining vectors. Furthermore, we formulate the sum rate maximization problem and develop two low-complexity joint beam selection and UE association algorithms considering the impact of asynchronous timing offset exceeding the CP range. Simulation results demonstrate that the performance will be severely limited by ICI and ISI, and our proposed PBTA hybrid precoding architecture effectively mitigates asynchronous interference compared to the nearest AAU/UE-based timing-advance scheme. Additionally, numerical results show that our proposed low-complexity joint beam selection and UE association algorithms achieve superior SE performance.

eess.SP↗

arXiv2024

Large Generative Model-assisted Talking-face Semantic Communication System

The rapid development of generative Artificial Intelligence (AI) continually unveils the potential of Semantic Communication (SemCom). However, current talking-face SemCom systems still encounter challenges such as low bandwidth utilization, semantic ambiguity, and diminished Quality of Experience (QoE). This study introduces a Large Generative Model-assisted Talking-face Semantic Communication (LGM-TSC) System tailored for the talking-face video communication. Firstly, we introduce a Generative Semantic Extractor (GSE) at the transmitter based on the FunASR model to convert semantically sparse talking-face videos into texts with high information density. Secondly, we establish a private Knowledge Base (KB) based on the Large Language Model (LLM) for semantic disambiguation and correction, complemented by a joint knowledge base-semantic-channel coding scheme. Finally, at the receiver, we propose a Generative Semantic Reconstructor (GSR) that utilizes BERT-VITS2 and SadTalker models to transform text back into a high-QoE talking-face video matching the user's timbre. Simulation results demonstrate the feasibility and effectiveness of the proposed LGM-TSC system.

cs.IT↗

arXiv2024

Performance Analysis of Local Partial MMSE Precoding Based User-Centric Cell-Free Massive MIMO Systems and Deployment Optimization

Cell-free massive multiple-input multiple-output (MIMO) systems, leveraging tight cooperation among wireless access points, exhibit remarkable signal enhancement and interference suppression capabilities, demonstrating significant performance advantages over traditional cellular networks. This paper investigates the performance and deployment optimization of a user-centric scalable cell-free massive MIMO system with imperfect channel information over correlated Rayleigh fading channels. Based on the large-dimensional random matrix theory, this paper presents the deterministic equivalent of the ergodic sum rate for this system when applying the local partial minimum mean square error (LP-MMSE) precoding method, along with its derivative with respect to the channel correlation matrix. Furthermore, utilizing the derivative of the ergodic sum rate, this paper designs a Barzilai-Borwein based gradient descent method to improve system deployment. Simulation experiments demonstrate that under various parameter settings and large-scale antenna configurations, the deterministic equivalent of the ergodic sum rate accurately approximates the Monte Carlo ergodic sum rate of the system. Furthermore, the deployment optimization algorithm effectively enhances the ergodic sum rate of this system by optimizing the positions of access points.

eess.SP↗

arXiv2024

A Framework of RIS-assisted ICSC User-centric Based Systems: Latency Optimization and Design

This paper studies a comprehensive framework for reconfigurable intelligent surface (RIS)-assisted integrated communication, sensing, and computation (ICSC) systems with a User-centric focus. The study encompasses two scenarios: the general multi-user equipment (UE) scenario and the simplified single-UE scenario. To satisfy the critical need for time-efficient sensing, we investigate the latency minimization problem, subject to constraints on UEs' transmit power, radar signal-to-interference-plus-noise-ratio (SINR), RIS phase shift, and computation capability. To address the formulated non-convex problem in the multi-UE scenario, we decouple the original problem into two subproblems, where the computational and beamforming settings are optimized alternately. Specifically, for the computational settings, we derive a closed-form solution for the offloading volume and propose a low-complexity algorithm based on the bisection search method to optimize the edge computing resource allocation. Additionally, we employ two equivalent transformations to address the challenge posed by the non-convex sum-of-ratios form in the objective function (OF) of the subproblem related to active and passive beamforming. Several techniques are then combined to address these subproblems. Furthermore, a low-complexity algorithm that offers closed-form solutions is developed for the simplified single UE scenario. Finally, simulation results substantiate the effectiveness of the proposed framework.

eess.SP↗

arXiv2024

Addressing the Mutual Interference in Uplink ISAC Receivers: A Projection Method

Dual function radar and communication (DFRC) is a promising research direction within integrated sensing and communication (ISAC), improving hardware and spectrum efficiency by merging sensing and communication (S&C) functionalities into a shared platform. However, the DFRC receiver (DFRC-R) is tasked with both uplink communication signal detection and simultaneously target-related parameter estimation from the echoes, leading to issues with mutual interference. In this paper, a projection-based scheme is proposed to equivalently transform the joint signal detection and target estimation problem into a joint signal detection process across multiple snapshots. Compared with conventional successive interference cancellation (SIC) schemes, our proposed approach achieves a higher signal-to-noise ratio (SNR), and a higher ergodic rate when the radar signal is non-negligible. Nonetheless, it introduces an ill-conditioned signal detection problem, which is addressed using a non-linear detector. By jointly processing an increased number of snapshots, the proposed scheme can achieve high S&C performance simultaneously.

cs.IT↗

arXiv2024

Channel Estimation for mmWave MIMO-OFDM Systems in High-Mobility Scenarios: Instantaneous Model or Statistical Model?

Classical linear statistical models, like the first-order auto-regressive (AR) model, are commonly used as channel model in high-mobility scenarios. However, compared to sub-6G, the effect of Doppler frequency shifts is more significant at millimeter wave (mmWave) frequencies, and the effectiveness of the statistical channel model in high-mobility mmWave scenarios should be reconsidered. In this paper, we investigate the channel estimation for mmWave multiple-input multiple-output-(MIMO) orthogonal frequency division multiplexing (OFDM) systems in high-mobility scenarios, with the focus on the comparison between the instantaneous channel model and the statistical channel model. For the instantaneous model, by leveraging the low-rank nature of mmWave channels and the multidimensional characteristics of MIMO-OFDM signals across space, time, and frequency, the received signals are structured as a fourth-order tensor fitting a low-rank CANDECOMP/PARAFAC (CP) model. Then, to solve the CP decomposition problem, an estimation of signal parameters via rotational invariance techniques (ESPRIT)-type decomposition based channel estimation method is proposed by exploring the Vandermonde structure of factor matrix, and the channel parameters are then estimated from the factor matrices. We analyze the uniqueness condition of the CP decomposition and develop a concise derivation of the Cramer-Rao bound (CRB) for channel parameters. Simulations show that our method outperforms the existing benchmarks. Furthermore, the results based on the wireless environment generated by Wireless InSite verify that the channel estimation based on the instantaneous channel model performs better than that based on the statistical channel model. Therefore, the instantaneous channel model is recommended for designing channel estimation algorithm for mmWave systems in high-mobility scenarios.

cs.IT↗

arXiv2024

Target Localization in Cooperative ISAC Systems: A Scheme Based on 5G NR OFDM Signals

The integration of sensing capabilities into communication systems, by sharing physical resources, has a significant potential for reducing spectrum, hardware, and energy costs while inspiring innovative applications. Cooperative networks, in particular, are expected to enhance sensing services by enlarging the coverage area and enriching sensing measurements, thus improving the service availability and accuracy. This paper proposes a cooperative integrated sensing and communication (ISAC) framework by leveraging information-bearing orthogonal frequency division multiplexing (OFDM) signals transmitted by access points (APs). Specifically, we propose a two-stage scheme for target localization, where communication signals are reused as sensing reference signals based on the system information shared at the central processing unit (CPU). In Stage I, we propose a twodimensional fast Fourier transform (2D-FFT)-based algorithm to measure the ranges of scattered paths induced by targets, through the extraction of delay and Doppler information from the sensing channels between APs. Then, the target locations are estimated in Stage II based on these range measurements. Considering the potential occurrence of ill-conditioned measurements with large error during the extraction of time-frequency information, we propose an efficient algorithm to match the range measurements with the targets while eliminating ill-onditioned measurements, achieving high-accuracy target localization. In addition, based on the transmission configurations defined in the fifth generation (5G) standards, we elucidate the performance trade-offs in both communication and sensing, and extend the proposed sensing scheme for general scenarios. Finally, numerical results confirm the effectiveness of our sensing scheme and the cooperative gain of the ISAC framework.

eess.SP↗

arXiv2024

Augmenting Channel Simulator and Semi- Supervised Learning for Efficient Indoor Positioning

This work aims to tackle the labor-intensive and resource-consuming task of indoor positioning by proposing an efficient approach. The proposed approach involves the introduction of a semi-supervised learning (SSL) with a biased teacher (SSLB) algorithm, which effectively utilizes both labeled and unlabeled channel data. To reduce measurement expenses, unlabeled data is generated using an updated channel simulator (UCHS), and then weighted by adaptive confidence values to simplify the tuning of hyperparameters. Simulation results demonstrate that the proposed strategy achieves superior performance while minimizing measurement overhead and training expense compared to existing benchmarks, offering a valuable and practical solution for indoor positioning.

eess.SP↗

arXiv2024

Channel Modeling Aided Dataset Generation for AI-Enabled CSI Feedback: Advances, Challenges, and Solutions

The AI-enabled autoencoder has demonstrated great potential in channel state information (CSI) feedback in frequency division duplex (FDD) multiple input multiple output (MIMO) systems. However, this method completely changes the existing feedback strategies, making it impractical to deploy in recent years. To address this issue, this paper proposes a channel modeling aided data augmentation method based on a limited number of field channel data. Specifically, the user equipment (UE) extracts the primary stochastic parameters of the field channel data and transmits them to the base station (BS). The BS then updates the typical TR 38.901 model parameters with the extracted parameters. In this way, the updated channel model is used to generate the dataset. This strategy comprehensively considers the dataset collection, model generalization, model monitoring, and so on. Simulations verify that our proposed strategy can significantly improve performance compared to the benchmarks.

eess.SP↗

arXiv2024

Optimizing Age of Information in Vehicular Edge Computing with Federated Graph Neural Network Multi-Agent Reinforcement Learning

With the rapid development of intelligent vehicles and Intelligent Transport Systems (ITS), the sensors such as cameras and LiDAR installed on intelligent vehicles provides higher capacity of executing computation-intensive and delay-sensitive tasks, thereby raising deployment costs. To address this issue, Vehicular Edge Computing (VEC) has been proposed to process data through Road Side Units (RSUs) to support real-time applications. This paper focuses on the Age of Information (AoI) as a key metric for data freshness and explores task offloading issues for vehicles under RSU communication resource constraints. We adopt a Multi-agent Deep Reinforcement Learning (MADRL) approach, allowing vehicles to autonomously make optimal data offloading decisions. However, MADRL poses risks of vehicle information leakage during communication learning and centralized training. To mitigate this, we employ a Federated Learning (FL) framework that shares model parameters instead of raw data to protect the privacy of vehicle users. Building on this, we propose an innovative distributed federated learning framework combining Graph Neural Networks (GNN), named Federated Graph Neural Network Multi-Agent Reinforcement Learning (FGNN-MADRL), to optimize AoI across the system. For the first time, road scenarios are constructed as graph data structures, and a GNN-based federated learning framework is proposed, effectively combining distributed and centralized federated aggregation. Furthermore, we propose a new MADRL algorithm that simplifies decision making and enhances offloading efficiency, further reducing the decision complexity. Simulation results demonstrate the superiority of our proposed approach to other methods through simulations.

cs.LG↗

arXiv2024

Beamforming Design for IRS-and-UAV-Aided Two-Way Amplify-and-Forward Relay Networks in Maritime IoT

In this paper, an intelligent reflecting surface (IRS)-and-unmanned aerial vehicle (UAV)-assisted two-way amplify-and-forward (AF) relay network in maritime Internet of Things (IoT) is proposed, where ship1 ($\text{S}_1$) and ship2 ($\text{S}_2$) can be viewed as data collecting centers. To enhance the message exchange rate between $\text{S}_1$ and $\text{S}_2$, a problem of maximizing minimum rate is cast, where the variables, namely AF relay beamforming matrix and IRS phase shifts of two time slots, need to be optimized. To achieve a maximum rate, a low-complexity alternately iterative (AI) scheme based on zero forcing and successive convex approximation (LC-ZF-SCA) algorithm is presented. To obtain a significant rate enhancement, a high-performance AI method based on one step, semidefinite programming and penalty SCA (ONS-SDP-PSCA) is proposed. Simulation results show that by the proposed LC-ZF-SCA and ONS-SDP-PSCA methods, the rate of the IRS-and-UAV-assisted AF relay network surpass those of with random phase and only AF relay networks. Moreover, ONS-SDP-PSCA perform better than LC-ZF-SCA in aspect of rate.

cs.IT↗