Searcharxiv⌕ Search

arXiv subjects

Jianmin Li

Publications and source records attributed to Jianmin Li.

At least 55 records · Page 3Linked to original sources

Preliminary Design of a FADC Readout System for the Alpha/Beta Discrimination in a Large Area Plastic Scintillation Detector

This paper describes a FADC Readout system developed for the tap water $α/β$ dose monitoring system which is based on EJ444 phoswich scintillation detector and wavelength shifting fiber readout. The Readout system contains dual sampling channels that can supply sampling rate up to 1 GSPS, 14-Bit vertical resolution and adequate effective number of bits (9.7 Bits at 10 MHz), which is optimum for the discrimination of the minimal difference between alpha/beta signals. Moreover, the system is based on a ZYNQ SoC which provides high data throughput speed, low latency and excellent flexibility. As for the discrimination algorithms, a simple least-square classification method is used to discriminate the $α/β$ signals and shows high discrimination capability. Besides, the front-end electronics and high voltage supply modules are also briefly introduced in the paper.

physics.ins-det↗

Noise Analysis of Current Sensitive Preamplifiers and Influence on Energy Resolution of NaI:Tl Detector System

Current Sensitive Preamplifiers (CSPs) are widely used in front-end electronics in data acquire system (DAQ), due to their ability to amplify signals directly. The optimization of energy resolution requires CSPs with suitable parameters such as gain, bandwidth, and low noise, etc. With the rapid improvement of CSP's bandwidth and trans-impedance gain, it is necessary to know how does the output noise of CSPs effect the energy resolution. For this purpose, we built the noise model of CSPs and analyzed the output noise voltage density of CSPs based on different commercial operation amplifiers (OP AMPs). Theoretical and experimental results shown that OP AMPs with low input noise voltage density is superior than others on energy resolution. Moreover, noise normalization factor has been defined to verify the relationship between energy resolution and noise of CSPs. The experimental results shown that the energy resolution and noise normalization factor are linearly conformable. This paper can provide reference on selecting commercial OP AMPs to design CSPs for optimization of energy resolution.

physics.ins-det↗

Analysis and Verification of Relation between Digitizer's Sampling Properties and Energy Resolution of HPGe Detectors

The CDEX (China Dark matter Experiment) aims at detection of WIMPs (Weakly Interacting Massive Particles) and 0vbb (Neutrinoless double beta decay) of 76Ge. It now uses ~10 kg HPGe (High Purity Germanium) detectors in CJPL (China Jinping Underground Laboratory). The energy resolution of detectors is calculated via height spectrum of waveforms with 6-us shaping time. It is necessary to know how sampling properties of a digitizer effect the energy resolution. This paper will present preliminary energy resolution results of waveforms at different sampling properties. The preliminary results show that the ENOB (effective number of bits) with 8.25-bit or better can meet the energy resolution @122keV of CDEX HPGe detectors. Based on the ADC (Analog-to-Digital Converter) quantized error theory, this paper will also make a quantitative analysis on energy resolution in CDEX HPGe detectors. It will provide guidance for ADC design in full-chain cryogenic readout electronics for HPGe detectors.

physics.ins-det↗

Pulse Shape Discrimination of Bulk and Very Bulk Events within HPGe Detectors

The CDEX (China Dark matter Experiment) now deploys ~10 kg pPCGe (p-type Point Contact Germanium) detectors in CJPL (China Jinping Underground Laboratory). It aims to detect rare events such as dark matter and 0vbb (neutrinoless double beta decay). The discrimination of bulk and very bulk events are essential for improvements of the analysis threshold of dark matter. Very bulk events are generated near the p+ point surface of pPCGe, which are usually from radioactive materials of electronic devices. Due to different locations of charge collection, bulk and very bulk events have different pulse shape. This paper will present two linear PSD (Pulse Shape Discrimination) methods: CCM (Charge Comparison Method) and Fisher's LDA (Linear Discriminant Analysis), to realize the discrimination of bulk and very bulk events. The results show that FOMs (Figure of Merit) are 1.38 $\pm$ 0.33 and 1.62 $\pm$ 0.18 by CCM and Fisher's LDA respectively.

physics.ins-det↗

Delving Deeper into the Decoder for Video Captioning

Video captioning is an advanced multi-modal task which aims to describe a video clip using a natural language sentence. The encoder-decoder framework is the most popular paradigm for this task in recent years. However, there exist some problems in the decoder of a video captioning model. We make a thorough investigation into the decoder and adopt three techniques to improve the performance of the model. First of all, a combination of variational dropout and layer normalization is embedded into a recurrent unit to alleviate the problem of overfitting. Secondly, a new online method is proposed to evaluate the performance of a model on a validation set so as to select the best checkpoint for testing. Finally, a new training strategy called professional learning is proposed which uses the strengths of a captioning model and bypasses its weaknesses. It is demonstrated in the experiments on Microsoft Research Video Description Corpus (MSVD) and MSR-Video to Text (MSR-VTT) datasets that our model has achieved the best results evaluated by BLEU, CIDEr, METEOR and ROUGE-L metrics with significant gains of up to 18% on MSVD and 3.5% on MSR-VTT compared with the previous state-of-the-art models.

cs.CV↗

Performance of Linear Classification Algorithms on alpha/gamma Discrimination for LaBr3:Ce Scintillation Detectors with Various Pulse Digitizer Properties

With the development of high-speed readout electronics, the digital pulse shape discrimination (PSD) methods have attracted the attention of more researchers, especially in the field of high energy physics and neutron detection. How to choose a PSD algorithm and corresponding data acquisition system (DAQ) naturally becomes a critical problem to settle down for the detection system designers. In this paper, the relationship between the classification performance of different PSD algorithms and digitizers' sampling properties (including sampling rate and the effective number of bits) has been researched based on $\mathrm{LaBr_3}$:Ce scintillation detectors. A self-developed integrated digitizer configured with five different ADCs and a WavePro 404HD oscilloscope were deployed to digitize the waveforms from $\mathrm{LaBr_3}$:Ce scintillators. Moreover, three PSD methods, charge comparison method (CCM), least square for classification method (LS) and Fisher's linear discriminant analysis (LDA), based on linear model were applied to discriminate the alpha signals from the intrinsic isotope $^{227}$Ac. With the LS method and a 125 MSPS 14-Bit ADC, the FoM value was 1.424$\pm$0.042, which is similar to the result from LDA but 31\% better than the result of CCM. The discrimination results showed that the performances of LS and LDA are less affected by the sampling rate with respect to the CCM method, which reflects in a better PSD capability. The results of this paper can help the developers of detector systems to make a trade-off among sampling properties, desirable discrimination results and the cost of systems.

physics.ins-det↗

Prototype of Pulse Digitizer and Readout Electronics for CDEX-10 in CJPL

The CDEX (China Dark matter Experiment) is currently in the stage to upgrade to approximately 10 kg HPGe (High Purity Germanium) detectors (CDEX-10) in CJPL (China Jinping Underground Laboratory) and aims to detect the WIMP (Weakly Interacting Massive Particles). Six analog signals and one inhibited signal are outputted from preamplifier by one HPGe detector (~1 kg) of CDEX-10. The analog signals are conditioned with two 6-us and one 12-us shaping amplifiers, and three timing amplifiers respectively. The inhibited signal is used for trigger. The analog signals from shaping and timing amplifiers are digitized to obtain energy spectrum and rise-time distribution. The rise-time distribution is used to discriminate surface, bulk, and very bulk events, which can help to supress the background level in dark matter detection. Composed of commercial modules, the previous DAQ (Data Acquisition Systems) is insufficient in discriminating between bulk and very bulk events due to the limited sampling rate (100 MSPS). Besides, as number of channel increases, the system will be simplified by integrating the trigger logic in FPGA (Field Programmable Gate Array). In this paper, a prototype named RAIN4HPGe is designed with pulse digitizer and readout electronics, integrating 14-Bit 100 MSPS ADCs (Analog-to-Digital Converters), 12-Bit 1 GSPS ADCs, FPGA etc.. The RAIN1000Z1 readout module based on ZYNQ SoC (System on Chip) is used for readout over Gigabit Ethernet. Better energy resolution, e.g. improving from 558 eV to 474 eV @122 keV, can be achieved by RAIN4HPGe compared to previous DAQ (Data Acquisition Systems) with commercial solution. Moreover, the discrimination performance of bulk, and very bulk events has been improved by RAIN4HPGe with 1 GSPS ADC.

physics.ins-det↗

Optimization of Energy Resolution and Pulse Shape Discrimination for a CLYC Detector with Integrated Digitizers

Sufficient current pulse information of nuclear radiation detectors can be retained by direct waveform digitization owing to the improvement of digitizer's performance. In many circumstances, reasonable cost and power consumption are on demand while the energy resolution and PSD performance should be ensured simultaneously for detectors. This paper will quantitatively analyse the influence of vertical resolution and sampling rate of digitizers on the energy resolution and PSD performance. The energy resolution and PSD performance can be generally optimized by improving the sampling rate and ENOB (effective number of bits) of digitizers. Several integrated digitizers, with sampling rates varying from 100 MSPS to 500 MSPS and vertical resolution ranging from 12-Bit to 16-Bit, were designed and integrated with a CLYC detector for verifications. Experimental results show good accordance with theoretical calculations. The conclusion can give guidance to designs of digitizes for similar applications in need of optimizing the energy resolution and PSD performance, and help to choose proper digitizers for different requirements.

physics.ins-det↗

Pairwise Teacher-Student Network for Semi-Supervised Hashing

Hashing method maps similar high-dimensional data to binary hashcodes with smaller hamming distance, and it has received broad attention due to its low storage cost and fast retrieval speed. Pairwise similarity is easily obtained and widely used for retrieval, and most supervised hashing algorithms are carefully designed for the pairwise supervisions. As labeling all data pairs is difficult, semi-supervised hashing is proposed which aims at learning efficient codes with limited labeled pairs and abundant unlabeled ones. Existing methods build graphs to capture the structure of dataset, but they are not working well for complex data as the graph is built based on the data representations and determining the representations of complex data is difficult. In this paper, we propose a novel teacher-student semi-supervised hashing framework in which the student is trained with the pairwise information produced by the teacher network. The network follows the smoothness assumption, which achieves consistent distances for similar data pairs so that the retrieval results are similar for neighborhood queries. Experiments on large-scale datasets show that the proposed method reaches impressive gain over the supervised baselines and is superior to state-of-the-art semi-supervised hashing methods.

cs.CV↗

Joint Cluster Unary Loss for Efficient Cross-Modal Hashing

With the rapid growth of various types of multimodal data, cross-modal deep hashing has received broad attention for solving cross-modal retrieval problems efficiently. Most cross-modal hashing methods follow the traditional supervised hashing framework in which the $O(n^2)$ data pairs and $O(n^3)$ data triplets are generated for training, but the training procedure is less efficient because the complexity is high for large-scale dataset. To address these issues, we propose a novel and efficient cross-modal hashing algorithm in which the unary loss is introduced. First of all, We introduce the Cross-Modal Unary Loss (CMUL) with $O(n)$ complexity to bridge the traditional triplet loss and classification-based unary loss. A more accurate bound of the triplet loss for structured multilabel data is also proposed in CMUL. Second, we propose the novel Joint Cluster Cross-Modal Hashing (JCCH) algorithm for efficient hash learning, in which the CMUL is involved. The resultant hashcodes form several clusters in which the hashcodes in the same cluster share similar semantic information, and the heterogeneity gap on different modalities is diminished by sharing the clusters. The proposed algorithm is able to be applied to various types of data, and experiments on large-scale datasets show that the proposed method is superior over or comparable with state-of-the-art cross-modal hashing methods, and training with the proposed method is more efficient than others.

cs.IR↗

Semantic Cluster Unary Loss for Efficient Deep Hashing

Hashing method maps similar data to binary hashcodes with smaller hamming distance, which has received a broad attention due to its low storage cost and fast retrieval speed. With the rapid development of deep learning, deep hashing methods have achieved promising results in efficient information retrieval. Most of the existing deep hashing methods adopt pairwise or triplet losses to deal with similarities underlying the data, but the training is difficult and less efficient because $O(n^2)$ data pairs and $O(n^3)$ triplets are involved. To address these issues, we propose a novel deep hashing algorithm with unary loss which can be trained very efficiently. We first of all introduce a Unary Upper Bound of the traditional triplet loss, thus reducing the complexity to $O(n)$ and bridging the classification-based unary loss and the triplet loss. Second, we propose a novel Semantic Cluster Deep Hashing (SCDH) algorithm by introducing a modified Unary Upper Bound loss, named Semantic Cluster Unary Loss (SCUL). The resultant hashcodes form several compact clusters, which means hashcodes in the same cluster have similar semantic information. We also demonstrate that the proposed SCDH is easy to be extended to semi-supervised settings by incorporating the state-of-the-art semi-supervised learning algorithms. Experiments on large-scale datasets show that the proposed method is superior to state-of-the-art hashing algorithms.

cs.CV↗

CDEX dark matter experiment: Status and prospects

The China Dark Matter Experiment (CDEX) aims at direct searches of light Weakly Interacting Massive Particles (WIMPs) at the China Jinping Underground Laboratory (CJPL) with an overburden of about 2400m rock. Results from a prototype CDEX-1 994 g p-type Point Contact Germanium(pPCGe) detector are reported. Research programs are pursued to further reduce the physics threshold by improving hardware and data analysis. The CDEX-10 experiment with a pPCGe array of 10 kg target mass range is being tested. The evolution of CDEX program into "CDEX-1T Experiment" with ton-scale germanium detector arrays will also be introduced in this study.

hep-ex↗

Factorized Distillation: Training Holistic Person Re-identification Model by Distilling an Ensemble of Partial ReID Models

Person re-identification (ReID) is aimed at identifying the same person across videos captured from different cameras. In the view that networks extracting global features using ordinary network architectures are difficult to extract local features due to their weak attention mechanisms, researchers have proposed a lot of elaborately designed ReID networks, while greatly improving the accuracy, the model size and the feature extraction latency are also soaring. We argue that a relatively compact ordinary network extracting globally pooled features has the capability to extract discriminative local features and can achieve state-of-the-art precision if only the model's parameters are properly learnt. In order to reduce the difficulty in learning hard identity labels, we propose a novel knowledge distillation method: Factorized Distillation, which factorizes both feature maps and retrieval features of holistic ReID network to mimic representations of multiple partial ReID models, thus transferring the knowledge from partial ReID models to the holistic network. Experiments show that the performance of model trained with the proposed method can outperform state-of-the-art with relatively few network parameters.

cs.CV↗

Real-time force control of an SEA-based body weight support unit with the 2-DOF control structure

Body weight support (BWS) is a fundamental technique in rehabilitation. Along with the dramatic progressing of rehabilitation science and engineering, BWS is quickly evolving with new initiatives and has attracted deep research effort in recent years. We have built up a novel gravity offloading system, in which the patient is allowed to move freely in the three-dimensional Cartesian space and receives support against gravity. Thus, the patients, especially for those that suffer from neurological injury such as stroke or spinal cord injury, can focus their residual motor control capabilities on essential therapeutic trainings of balance and gait. The real-time force control performance is critical for the BWS unit to provide suitable support and avoid disturbance. In this work, we have re-designed our BWS unit with a series elastic actuation structure to improve the human-robot interaction performance. Further, the 2 degrees of freedom (2-DOF) control approach was taken for accurate and robust BWS force control. Both simulation and experimental results have validated the efficacy of the BWS design and real-time control methods.

cs.RO↗

Preliminary Design of Integrated Digitizer Base for Photomultiplier Tube

In many physical experiments and applications with photomultiplier tubes (PMTs), high-speed pulse digitalization is used extensively. The current pulse from a PMT has a rising time of several to a hundred nanoseconds. The current pulse shape can be used to obtain the pulse energy and discriminate between different particles. The conventional readout system with a PMT uses the discrete or integrated pulse-shaping circuits and analogue-to-digital converter boards which are based on the NIM or VME system to implement the data acquisition function. In many applications, such as security instruments, there are only several PMTs used in the whole system, or in some distributed applications, long-distance analogue cable with high-voltage power cable is not applicable due to the tremendous number of channels and enormous distributed space. In this paper, an integrated digitizer base is designed and interfaced with a Cs2LiYCl6 (CLYC) scintillator with a PMT. The CLYC scintillator has the ability to realize the pulse shape discrimination (PSD) between the neutron and gamma-rays. There is only one Gigabit of unscreened twisted-pair cable needed for over 700 Mbps TCP data throughput and more than 10 W power. The boards of high voltage supply, current sensitive preamplifier, 500 MSPS/12-Bit ADC (Analog-to-Digital Converter), readout module based on ZYNQ SoC (System on Chip), power over Ethernet, and user interface circuits are stacked with board-to-board connectors. The system can achieve 4.6% gamma-ray energy resolution at 662 keV with a 20-μs pulse integral and PSD figure-of-merit of ~3.0 for the whole energy of neutrons and gamma-rays. This integrated digitizer base can also be interfaced with other detectors with a PMT.

physics.ins-det↗

Scalable Discrete Supervised Hash Learning with Asymmetric Matrix Factorization

Hashing method maps similar data to binary hashcodes with smaller hamming distance, and it has received a broad attention due to its low storage cost and fast retrieval speed. However, the existing limitations make the present algorithms difficult to deal with large-scale datasets: (1) discrete constraints are involved in the learning of the hash function; (2) pairwise or triplet similarity is adopted to generate efficient hashcodes, resulting both time and space complexity are greater than O(n^2). To address these issues, we propose a novel discrete supervised hash learning framework which can be scalable to large-scale datasets. First, the discrete learning procedure is decomposed into a binary classifier learning scheme and binary codes learning scheme, which makes the learning procedure more efficient. Second, we adopt the Asymmetric Low-rank Matrix Factorization and propose the Fast Clustering-based Batch Coordinate Descent method, such that the time and space complexity is reduced to O(n). The proposed framework also provides a flexible paradigm to incorporate with arbitrary hash function, including deep neural networks and kernel methods. Experiments on large-scale datasets demonstrate that the proposed method is superior or comparable with state-of-the-art hashing algorithms.

cs.CV↗

Letter of Intent: Jinping Neutrino Experiment

Jinping Neutrino Experiment (Jinping) is proposed to significantly improve measurements on solar neutrinos and geoneutrinos in China Jinping Laboratory - a lab with a number of unparalleled features, thickest overburden, lowest reactor neutrino background, etc., which identify it as the world-best low-energy neutrino laboratory. The proposed experiment will have target mass of 4 kilotons of liquid scintillator or water-based liquid scintillator, with a fiducial mass of 2 kilotons for neutrino-electron scattering events and 3 kilotons for inverse-beta interaction events. A number of initial sensitivities studies have been carried out, including on the transition phase for the solar neutrinos oscillation from the vacuum to the matter effect, the discovery of solar neutrinos from the carbon-nitrogen-oxygen (CNO) cycle, the resolution of the high and low metallicity hypotheses, and the unambiguous separation on U and Th cascade decays from the dominant crustal anti-electron neutrinos in China.

physics.ins-det↗

CNN Based Hashing for Image Retrieval

Along with data on the web increasing dramatically, hashing is becoming more and more popular as a method of approximate nearest neighbor search. Previous supervised hashing methods utilized similarity/dissimilarity matrix to get semantic information. But the matrix is not easy to construct for a new dataset. Rather than to reconstruct the matrix, we proposed a straightforward CNN-based hashing method, i.e. binarilizing the activations of a fully connected layer with threshold 0 and taking the binary result as hash codes. This method achieved the best performance on CIFAR-10 and was comparable with the state-of-the-art on MNIST. And our experiments on CIFAR-10 suggested that the signs of activations may carry more information than the relative values of activations between samples, and that the co-adaption between feature extractor and hash functions is important for hashing.

cs.CV↗