arXiv subjects

Jianwei Sun

Publications and source records attributed to Jianwei Sun.

At least 73 records · Page 4Linked to original sources

arXiv2020

Exceptionally large anomalous Hall effect due to anticrossing of spin-split bands in the antiferromagnetic half-Heusler compound TbPtBi

We have investigated magnetotransport properties and the topological electronic structure of the half-Heusler compound TbPtBi. Our experiments reveal an exceptionally large anomalous Hall effect (AHE) in the canted antiferromagnetic state of TbPtBi with the anomalous Hall angle (AHA) reaching ~0.68-0.76, which is a few times larger than the previously reported record in GdPtBi. First-principles electronic structure and the associated anomalous Hall conductivity were computed in order to interpret the experimental results. Our analysis shows that the AHE in TbPtBi does not originate from the Weyl points but that it is driven by the large net Berry curvature produced by the anticrossing of spin-split bands near the Fermi level in TbPtBi.

cond-mat.mes-hall↗

arXiv2020

Correlation in noncollinear antiferromagnetic $α$-Mn

We have investigated the interplay between magnetic and structural degrees of freedom in elemental Mn. The equilibrium volume is shown to depend critically on the magnetic interactions between the Mn atoms. While the standard generalized-gradient-approximation underestimates the equilibrium volume, a more accurate treatment of the effects of electronic localization and magnetism is found to solve this longstanding problem. We capture well the complexity of the large 58 atoms per unit cell $α$-Mn system for the first time, including its charge and spin patterns and the canting of spins with respect to the average magnetization direction.

cond-mat.mtrl-sci↗

arXiv2020

Spinon Excitations in the Quasi-1D S = 1/2 Chain Cs4CuSb2Cl12

The spin-1/2 Heisenberg antiferromagnetic chain is ideal for realizing one of the simplest gapless quantum spin-liquids (QSLs), supporting a many-body ground state whose elementary excitations are fractional fermionic excitations called spinons. Here we report the discovery of such a 1D QSL in Cs4CuSb2Cl12. Compared to previously reported S = 1/2 1D chains, this material possesses a wider temperature range over which the QSL state is stabilized. We identify spinon excitations extending at T > 0.8 K, with a large T-linear contribution to the specific heat, gamma = 31.5(2) mJ mol-1 K-2 which contribute itinerantly to thermal transport up to temperatures as high as T = 35 K. At T = 0.7 K, we find a second-order phase transition, suggesting a weak spin-Peierls transition that is unchanged by a 5 T magnetic field. Cs4CuSb2Cl12 reveals new phenomenology deep in the 1D QSL regime, supporting a gapped QSL phase over a wide temperature range compared to many other experimental realizations.

cond-mat.str-el↗

arXiv2019

Subtle metastability of the layered magnetic topological insulator MnBi2Te4 from weak interactions

The metastable layered compound MnBi2Te4 is the first experimentally realized intrinsic antiferromagnetic topological insulator, predicted to host the quantum anomalous Hall effect at high temperatures upon exfoliation to atomically thin layers. While its magnetic ordering and topological properties have generated intensive interest, the mechanism behind its metastability and the ideal crystal synthesis conditions have remained elusive. Here, using a combined first-principles-based approach that considers lattice, charge, and spin degrees of freedom, we investigate the metastability of MnBi2Te4 by calculating the Helmholtz free energy for the reaction Bi2Te3 + MnTe -> MnBi2Te4. We identify a narrow temperature range (767 K to 873 K) in which the compound is stable with respect to the competing binary phases and successfully synthesize high-quality MnBi2Te4 single crystals using the Bi-Te flux method within this range. We also predict the various contributions to the total specific heat, which is consistent with our experimental measurements. Our findings indicate that the degrees of freedom responsible for the van der Waals interaction, magnetic coupling, and nontrivial band topology in layered materials not only enable emergent phenomena but also determine thermodynamic stability. This conclusion lays the foundation for future computational material synthesis of novel layered systems.

cond-mat.mtrl-sci↗

arXiv2019

High yield production of ultrathin fibroid semiconducting nanowire of Ta$_2$Pd$_3$Se$_8$

Immediately after the demonstration of the high-quality electronic properties in various two dimensional (2D) van der Waals (vdW) crystals fabricated with mechanical exfoliation, many methods have been reported to explore and control large scale fabrications. Comparing with recent advancements in fabricating 2D atomic layered crystals, large scale production of one dimensional (1D) nanowires with thickness approaching molecular or atomic level still remains stagnant. Here, we demonstrate the high yield production of a 1D vdW material, semiconducting Ta2Pd3Se8 nanowires, by means of liquid-phase exfoliation. The thinnest nanowire we have readily achieved is around 1 nm, corresponding to a bundle of one or two molecular ribbons. Transmission electron microscopy and transport measurements reveal the as-fabricated Ta2Pd3Se8 nanowires exhibit unexpected high crystallinity and chemical stability. Our low frequency Raman spectroscopy reveals clear evidence of the existing of weak inter-ribbon bindings. The fabricated nanowire transistors exhibit high switching performance and promising applications for photodetectors.

physics.app-ph↗

arXiv2019

Re-thinking CO adsorption on transition-metal surfaces: Density-driven error?

Adsorption of the molecule CO on metallic surfaces is an important unsolved problem in Kohn-Sham density functional theory (KS-DFT). We present a detailed study of carbon monoxide adsorption on fcc (111) surfaces of 3d, 4d and 5d metals using nonempirical semilocal density functionals for the exchange-correlation energy: the local-density approximation (LDA), two generalized gradient approximations or GGAs (PBE and PBEsol), and a meta-GGA (SCAN). The typical error pattern (as found earlier for free molecules and for free transition metal surfaces), in which results improve from LDA to PBE or PBEsol to SCAN, due to the satisfaction of more exact constraints, is not found here. Instead, for CO adsorption on transition metal surfaces, we find that, while SCAN overbinds much less than LDA, it overbinds slightly more than PBE. Moreover, the tested functionals often predict the wrong adsorption site, as first pointed out for LDA and GGA in the ``CO/Pt (111) puzzle". This abnormal pattern leads us to suspect that the errors of PBE and SCAN for this problem are density-driven self-interaction errors associated with incorrect charge transfer between molecule and metal surface. We point out that, by the variational principle, overbinding by an approximate functional would be reduced if that functional were applied not to its selfconsistent density for the adsorbed system but to an exact or more correct density for that system. Finally, we show for CO on Pt(111) that the site preference is corrected and the adsorption energy is improved for the PBE functional by using not the selfconsistent PBE density but a PBE+U density. The resulting correction to the PBE total energy is much larger for the adsorbed system than for its desorbed components, showing that the error is in the density of the adsorbed system. This seems to solve the ``CO/Pt (111) puzzle", in principle if not fully in practice.

cond-mat.mtrl-sci↗

arXiv2018

Landscape of competing stripe and magnetic phases in cuprates

Realistic modeling of competing phases in complex quantum materials has proven extremely challenging. For example, much of the existing density-functional-theory-based first-principles framework fails in the cuprate superconductors. Various many-body approaches involve generic model Hamiltonians and do not account for the couplings between spin, charge, and lattice. Here, by deploying the recently constructed strongly-constrained-and-appropriately-normed density functional, we show how landscapes of competing stripe and magnetic phases can be addressed on a first-principles basis in YBa2Cu3O6 and YBa2Cu3O7 as archetype cuprate compounds. We invoke no free parameters such as the Hubbard U, which has been the basis of much of the cuprate literature. Lattice degrees of freedom are found to be crucially important in stabilizing the various phases.

cond-mat.supr-con↗

arXiv2018

Antiferromagnetic Ground State of La$_{2}$CuO$_{4}$: A Parameter-free Ab Initio Description

We show how an accurate first-principles treatment of the antiferromagnetic (AFM) ground state of La$_2$CuO$_4$ can be obtained without invoking any free parameters such as the Hubbard $U$. The magnitude and orientation of our theoretically predicted magnetic moment of $0.495 μ_{B}$ on Cu-sites along the (100) direction are in excellent accord with experimental results. The computed values of the band gap (1.00 eV) and the exchange-coupling (-138 meV) match the corresponding experimental values. We identify interesting band splittings below the Fermi energy, including an appreciable Hund's splitting of 1.25 eV. The magnetic form factor obtained from neutron scattering experiments is also well described by our calculations. Our study opens up a new pathway for first-principles investigations of electronic and atomic structures and phase diagrams of cuprates and other complex materials.

cond-mat.str-el↗

arXiv2018

Enhancing the efficiency of density functionals with a novel iso-orbital indicator

Due to its efficiency and reasonable accuracy, density functional theory is one of the most widely used electronic structure theories in condensed matter physics, materials physics, and quantum chemistry. The accuracy and efficiency of a density functional is dependent on the basic ingredients it uses, and how the ingredients are built into the functional as a whole. An iso-orbital indicator based on the electron density, its gradients, and the kinetic energy density, has proven an essential dimensionless variable that allows density functionals to recognise and correctly treat various types of chemical bonding, both strong and weak. Density functionals constructed around the iso-orbital indicator usually require dense real-space grids for numerical implementation that deteriorate computational efficiency, with poor grid convergence compromising the improved accuracy. Here, a novel iso-orbital indicator is proposed based on the same ingredients that retains the capability to identify the same chemical bonds while significantly relieving the requirement of dense grids, and giving an improved recognition for tail regions of electron densities. The novel iso-orbital indicator is therefore expected to be the prime choice for further density functional development.

physics.chem-ph↗

arXiv2017

Performance of SCAN density functional for a set of ionic liquid ion pairs

Computational chemistry is a powerful tool for the discovery of novel materials. In particular, it is used to simulate ionic liquids in search of electrolytes for electrochemical applications. Herein, the choice of the computational method is not trivial, as it has to be both efficient and accurate. Density functional theory (DFT) methods with appropriate corrections for the systematic weaknesses can give precision close to that of the post-Hartree--Fock coupled cluster methods with a fraction of their cost. Thence, we have evaluated the performance of a recently developed non-empirical Strongly Constrained and Appropriately Normed (SCAN) density functional on electronic structure calculations of ionic liquid ion pairs. The performance of SCAN and other popular functionals (PBE, M06-L, B2PLYP) among with Grimme's dispersion correction and Boys-Bernardi basis set superposition error correction was compared to DLPNO-CCSD(T)/CBS. We show that SCAN reproduces coupled-cluster results for describing the employed dataset of 48 ion pairs.

physics.atm-clus↗

arXiv2017

Comparative first-principles studies of prototypical ferroelectric materials by LDA, GGA, and SCAN meta-GGA

Originating from a broken spatial inversion symmetry, ferroelectricity is a functionality of materials with an electric dipole that can be switched by external electric fields. Spontaneous polarization is a crucial ferroelectric property, and its amplitude is determined by the strength of polar structural distortions. Density functional theory (DFT) is one of the most widely used theoretical methods to study ferroelectric properties, yet it is limited by the levels of approximations in electron exchange-correlation. On the one hand, the local density approximation (LDA) is considered to be more accurate for the conventional perovskite ferroelectrics such as BaTiO3 and PbTiO3 than the generalized gradient approximation (GGA), which suffers from the so-called super-tetragonality error. On the other hand, GGA is more suitable for hydrogen-bonded ferroelectrics than LDA, which largely overestimates the strength of hydrogen bonding in general. We show here that the recently developed general-purpose strongly constrained and appropriately normed (SCAN) meta-GGA functional significantly improves over the traditional LDA/GGA for structural, electric, and energetic properties of diversely-bonded ferroelectric materials with a comparable computational effort, and thus enhances largely the predictive power of DFT in studies of ferroelectric materials. We also address the observed system-dependent performances of LDA and GGA for ferroelectrics from a chemical bonding point of view.

cond-mat.mtrl-sci↗

arXiv2017

Properties of real metallic surfaces: Effects of density functional semilocality and van der Waals nonlocality

We have computed the surface energies, work functions, and interlayer surface relaxations of clean (111), (110), and (100) surfaces of Al, Cu, Ru, Rh, Pd, Ag, Pt, and Au. Many of these metallic surfaces have technological or catalytic applications. We compare experimental reference values to those of the local density approximation (LDA), the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA), the PBEsol (PBE for solids) GGA, the SCAN meta-GGA, and SCAN+rVV10 (SCAN with a long-range van der Waals or vdW correction). The closest agreement with uncertain experimental values is achieved by the simplest density functional (LDA) and by the most sophisticated general-purpose one (SCAN+rVV10). The long-range vdW interaction increases the surface energies by about 10%, and the work functions by about 1%. LDA works for metal surfaces through a stronger-than-usual error cancellation. PBE yields the most-underestimated and presumably least accurate surface energies and work functions. Surface energies within the random phase approximation (RPA) are also reported. Interlayer relaxations from different functionals are in reasonable agreement with one another, and usually with experiment.

cond-mat.mtrl-sci↗

arXiv2017

Understanding Band Gaps of Solids in Generalized Kohn-Sham Theory

The fundamental energy gap of a periodic solid distinguishes insulators from metals and characterizes low-energy single-electron excitations. But the gap in the band-structure of the exact multiplicative Kohn-Sham (KS) potential substantially underestimates the fundamental gap, a major limitation of KS density functional theory. Here we give a simple proof of a new theorem: In generalized KS theory (GKS), the band gap of an extended system equals the fundamental gap for the approximate functional if the GKS potential operator is continuous and the density change is delocalized when an electron or hole is added. Our theorem explains how GKS band gaps from meta-generalized gradient approximations (meta-GGAs) and hybrid functionals can be more realistic than those from GGAs or even from the exact KS potential. The theorem also follows from earlier work. The band edges in the GKS one-electron spectrum are also related to measurable energies. A linear chain of hydrogen molecules, solid aluminum arsenide, and solid argon provide numerical illustrations.

cond-mat.mtrl-sci↗

arXiv2016

More-Realistic Band Gaps from Meta-Generalized Gradient Approximations: Only in a Generalized Kohn-Sham Scheme

Unlike the local density approximation (LDA) and the generalized gradient approximation (GGA), calculations with meta-generalized gradient approximations (meta-GGA) are usually done according to the generalized Kohn-Sham (gKS) formalism. The exchange-correlation potential of the gKS equation is non-multiplicative, which prevents systematic comparison of meta-GGA bandstructures to those of the LDA and the GGA. We implement the optimized effective potential (OEP) of the meta-GGA for periodic systems, which allows us to carry out meta-GGA calculations in the same KS manner as for the LDA and the GGA. We apply the OEP to several meta-GGAs, including the new SCAN functional [Phys. Rev. Lett. 115, 036402 (2015)]. We find that the KS gaps and KS band structures of meta-GGAs are close to those of GGAs. They are smaller than the more realistic gKS gaps of meta-GGAs, but probably close to the less-realistic gaps in the band structure of the exact KS potential, as can be seen by comparing with the gaps of the EXX+RPA OEP potential. The well-known grid sensitivity of meta-GGAs is much more severe in OEP calculations.

cond-mat.mtrl-sci↗

arXiv2016

SCAN+rVV10: A promising van der Waals density functional

The newly developed "strongly constrained and appropriately normed" (SCAN) meta-generalized-gradient approximation (meta-GGA) can generally improve over the non-empirical Perdew-Burke-Ernzerhof (PBE) GGA not only for strong chemical bonding, but also for the intermediate-range van der Waals (vdW) interaction. However, the long-range vdW interaction is still missing. To remedy this, we propose here pairing SCAN with the non-local correlation part from the rVV10 vdW density functional, with only two empirical parameters. The resulting SCAN+rVV10 yields excellent geometric and energetic results not only for molecular systems, but also for solids and layered-structure materials, as well as the adsorption of benzene on coinage metal surfaces. Especially, SCAN+rVV10 outperforms all current methods with comparable computational efficiencies, accurately reproducing the three most fundamental parameters---the inter-layer binding energies, inter-, and intra-layer lattice constants---for 28 layered-structure materials. Hence, we have achieved with SCAN+rVV10 a promising vdW density functional for general geometries, with minimal empiricism.

cond-mat.mtrl-sci↗

arXiv2016

Near-locality of exchange and correlation density functionals for 1- and 2-electron systems

The uniform electron gas and the hydrogen atom play fundamental roles in condensed matter physics and quantum chemistry. The former has an infinite number of electrons uniformly distributed over the neutralizing positively-charged background, and the latter only one electron bound to the proton. The uniform electron gas was used to derive the local spin density approximation (LSDA) to the exchange-correlation functional that undergirds the development of the Kohn-Sham density functional theory. We show here that the ground-state exchange-correlation energies of the hydrogen atom and many other 1- and 2-electron systems are modeled surprisingly well by a different local spin density approximation (LSDA0). Our LSDA0 is constructed to satisfy exact constraints, but agrees surprisingly well with the exact results for a uniform two-electron density in a finite, curved three-dimensional space. We also apply LSDA0 to excited or noded 1-electron densities. Furthermore, we show that the locality of an orbital can be measured by the ratio between the exact exchange energy and its optimal lower bound.

physics.chem-ph↗

arXiv2015

SCAN: An Efficient Density Functional Yielding Accurate Structures and Energies of Diversely-Bonded Materials

Kohn-Sham density functional theory (DFT) is a widely-used electronic structure theory for materials as well as molecules. DFT is needed especially for large systems, ab initio molecular dynamics, and high-throughput searches for functional materials. DFT's accuracy and computational efficiency are limited by the approximation to its exchange-correlation energy. Currently, the local density approximation (LDA) and generalized gradient approximations (GGAs) dominate materials computation mainly due to their efficiency. We show here that the recently developed non-empirical strongly constrained and appropriately normed (SCAN) meta-GGA improves significantly over LDA and the standard Perdew-Burke-Ernzerhof GGA for geometries and energies of diversely-bonded materials (including covalent, metallic, ionic, hydrogen, and van der Waals bonds) at comparable efficiency. Thus SCAN may be useful even for soft matter. Often SCAN matches or improves upon the accuracy of a computationally expensive hybrid functional, at almost-GGA cost. SCAN is therefore expected to have a broad impact on materials science.

cond-mat.mtrl-sci↗

arXiv2015

Combinations of coupled cluster, density functionals, and the random phase approximation for describing static and dynamic correlation, and van der Waals interactions

Contrary to standard coupled cluster doubles (CCD) and Brueckner doubles (BD), singlet-paired analogues of CCD and BD (denoted here as CCD0 and BD0) do not break down when static correlation is present, but neglect substantial amounts of dynamic correlation. In fact, CCD0 and BD0 do not account for any contributions from multielectron excitations involving only same-spin electrons at all. We exploit this feature to add---without introducing double counting, self-interaction, or increase in cost---the missing correlation to these methods via meta-GGA density functionals (TPSS and SCAN). Furthermore, we improve upon these CCD0+DFT blends by invoking range separation: the short- and long-range correlations absent in CCD0/BD0 are evaluated with DFT and the direct random phase approximation (dRPA), respectively. This corrects the description of long-range van der Waals forces. Comprehensive benchmarking shows that the combinations presented here are very accurate for weakly correlated systems, while also providing a reasonable description of strongly correlated problems without resorting to symmetry breaking.

physics.chem-ph↗