Searcharxiv⌕ Search

arXiv subjects

Jing Sun

Publications and source records attributed to Jing Sun.

At least 73 records · Page 4Linked to original sources

DMSD-CDFSAR: Distillation from Mixed-Source Domain for Cross-Domain Few-shot Action Recognition

Few-shot action recognition is an emerging field in computer vision, primarily focused on meta-learning within the same domain. However, challenges arise in real-world scenario deployment, as gathering extensive labeled data within a specific domain is laborious and time-intensive. Thus, attention shifts towards cross-domain few-shot action recognition, requiring the model to generalize across domains with significant deviations. Therefore, we propose a novel approach, ``Distillation from Mixed-Source Domain", tailored to address this conundrum. Our method strategically integrates insights from both labeled data of the source domain and unlabeled data of the target domain during the training. The ResNet18 is used as the backbone to extract spatial features from the source and target domains. We design two branches for meta-training: the original-source and the mixed-source branches. In the first branch, a Domain Temporal Encoder is employed to capture temporal features for both the source and target domains. Additionally, a Domain Temporal Decoder is employed to reconstruct all extracted features. In the other branch, a Domain Mixed Encoder is used to handle labeled source domain data and unlabeled target domain data, generating mixed-source domain features. We incorporate a pre-training stage before meta-training, featuring a network architecture similar to that of the first branch. Lastly, we introduce a dual distillation mechanism to refine the classification probabilities of source domain features, aligning them with those of mixed-source domain features. This iterative process enriches the insights of the original-source branch with knowledge from the mixed-source branch, thereby enhancing the model's generalization capabilities. Our code is available at URL: \url{https://xxxx/xxxx/xxxx.git}

cs.CV↗

Learning Topological Representations with Bidirectional Graph Attention Network for Solving Job Shop Scheduling Problem

Existing learning-based methods for solving job shop scheduling problems (JSSP) usually use off-the-shelf GNN models tailored to undirected graphs and neglect the rich and meaningful topological structures of disjunctive graphs (DGs). This paper proposes the topology-aware bidirectional graph attention network (TBGAT), a novel GNN architecture based on the attention mechanism, to embed the DG for solving JSSP in a local search framework. Specifically, TBGAT embeds the DG from a forward and a backward view, respectively, where the messages are propagated by following the different topologies of the views and aggregated via graph attention. Then, we propose a novel operator based on the message-passing mechanism to calculate the forward and backward topological sorts of the DG, which are the features for characterizing the topological structures and exploited by our model. In addition, we theoretically and experimentally show that TBGAT has linear computational complexity to the number of jobs and machines, respectively, strengthening our method's practical value. Besides, extensive experiments on five synthetic datasets and seven classic benchmarks show that TBGAT achieves new SOTA results by outperforming a wide range of neural methods by a large margin. All the code and data are publicly available online at https://github.com/zcaicaros/TBGAT.

cs.LG↗

PatentGPT: A Large Language Model for Intellectual Property

In recent years, large language models(LLMs) have attracted significant attention due to their exceptional performance across a multitude of natural language process tasks, and have been widely applied in various fields. However, the application of large language models in the Intellectual Property (IP) domain is challenging due to the strong need for specialized knowledge, privacy protection, processing of extremely long text in this field. In this technical report, we present for the first time a low-cost, standardized procedure for training IP-oriented LLMs, meeting the unique requirements of the IP domain. Using this standard process, we have trained the PatentGPT series models based on open-source pretrained models. By evaluating them on the open-source IP-oriented benchmark MOZIP, our domain-specific LLMs outperforms GPT-4, indicating the effectiveness of the proposed training procedure and the expertise of the PatentGPT models in the IP domain. Remarkably, our model surpassed GPT-4 on the 2019 China Patent Agent Qualification Examination, scoring 65 and matching human expert levels. Additionally, the PatentGPT model, which utilizes the SMoE architecture, achieves performance comparable to that of GPT-4 in the IP domain and demonstrates a better cost-performance ratio on long-text tasks, potentially serving as an alternative to GPT-4 within the IP domain.

cs.CL↗

State of Health Estimation for Battery Modules with Parallel-Connected Cells Under Cell-to-Cell Variations

State of health (SOH) estimation for lithium-ion battery modules with cells connected in parallel is a challenging problem, especially with cell-to-cell variations. Incremental capacity analysis (ICA) and differential voltage analysis (DVA) are effective at the cell level, but a generalizable method to extend them to module-level SOH estimation remains missing, when only module-level measurements are available. This paper proposes a new method and demonstrates that, with multiple features systematically selected from the module-level ICA and DVA, the module-level SOH can be estimated with high accuracy and confidence in the presence of cell-to-cell variations. First, an information theory-based feature selection algorithm is proposed to find an optimal set of features for module-level SOH estimation. Second, a relevance vector regression (RVR)-based module-level SOH estimation model is proposed to provide both point estimates and three-sigma credible intervals while maintaining model sparsity. With more selected features incorporated, the proposed method achieves better estimation accuracy and higher confidence at the expense of higher model complexity. When applied to a large experimental dataset, the proposed method and the resulting sparse model lead to module-level SOH estimates with a 0.5% root-mean-square error and a 1.5% average three-sigma value. With all the training processes completed offboard, the proposed method has low computational complexity for onboard implementations.

eess.SY↗

Behavior-Contextualized Item Preference Modeling for Multi-Behavior Recommendation

In recommender systems, multi-behavior methods have demonstrated their effectiveness in mitigating issues like data sparsity, a common challenge in traditional single-behavior recommendation approaches. These methods typically infer user preferences from various auxiliary behaviors and apply them to the target behavior for recommendations. However, this direct transfer can introduce noise to the target behavior in recommendation, due to variations in user attention across different behaviors. To address this issue, this paper introduces a novel approach, Behavior-Contextualized Item Preference Modeling (BCIPM), for multi-behavior recommendation. Our proposed Behavior-Contextualized Item Preference Network discerns and learns users' specific item preferences within each behavior. It then considers only those preferences relevant to the target behavior for final recommendations, significantly reducing noise from auxiliary behaviors. These auxiliary behaviors are utilized solely for training the network parameters, thereby refining the learning process without compromising the accuracy of the target behavior recommendations. To further enhance the effectiveness of BCIPM, we adopt a strategy of pre-training the initial embeddings. This step is crucial for enriching the item-aware preferences, particularly in scenarios where data related to the target behavior is sparse. Comprehensive experiments conducted on four real-world datasets demonstrate BCIPM's superior performance compared to several leading state-of-the-art models, validating the robustness and efficiency of our proposed approach.

cs.IR↗

Decision-making with Speculative Opponent Models

Opponent modelling has proven effective in enhancing the decision-making of the controlled agent by constructing models of opponent agents. However, existing methods often rely on access to the observations and actions of opponents, a requirement that is infeasible when such information is either unobservable or challenging to obtain. To address this issue, we introduce Distributional Opponent-aided Multi-agent Actor-Critic (DOMAC), the first speculative opponent modelling algorithm that relies solely on local information (i.e., the controlled agent's observations, actions, and rewards). Specifically, the actor maintains a speculated belief about the opponents using the tailored speculative opponent models that predict the opponents' actions using only local information. Moreover, DOMAC features distributional critic models that estimate the return distribution of the actor's policy, yielding a more fine-grained assessment of the actor's quality. This thus more effectively guides the training of the speculative opponent models that the actor depends upon. Furthermore, we formally derive a policy gradient theorem with the proposed opponent models. Extensive experiments under eight different challenging multi-agent benchmark tasks within the MPE, Pommerman and StarCraft Multiagent Challenge (SMAC) demonstrate that our DOMAC successfully models opponents' behaviours and delivers superior performance against state-of-the-art methods with a faster convergence speed.

cs.AI↗

Interlayer ferroelectric polarization modulated anomalous Hall effects in four-layer MnBi2Te4 antiferromagnets

Van der Waals (vdW) assembly could efficiently modulate the symmetry of two-dimensional (2D) materials that ultimately governs their physical properties. Of particular interest is the ferroelectric polarization being introduced by proper vdW assembly that enables the realization of novel electronic, magnetic and transport properties of 2D materials. Four-layer antiferromagnetic MnBi2Te4 (F-MBT) offers an excellent platform to explore ferroelectric polarization effects on magnetic order and topological transport properties of nanomaterials. Here, by applying symmetry analyses and density-functional-theory calculations, the ferroelectric interface effects on magnetic order, anomalous Hall effect (AHE) or even quantum AHE (QAHE) on the F-MBT are analyzed. Interlayer ferroelectric polarization in F-MBT efficiently violates the PT symmetry (the combination symmetry of central inversion (P) and time reverse (T) of the F-MBT by conferring magnetoelectric couplings, and stabilizes a specific antiferromagnetic order encompassing a ferromagnetic interface in the F-MBT. We predict that engineering an interlayer polarization in the top or bottom interface of F-MBT allows converting F-MBT from a trivial insulator to a Chern insulator. The switching of ferroelectric polarization at the middle interfaces results in a direction reversal of the quantum anomalous Hall current. Additionally, the interlayer polarization of the top and bottom interfaces can be aligned in the same direction, and the switching of polarization direction also reverses the direction of anomalous Hall currents. Overall, our work highlights the occurrence of quantum-transport phenomena in 2D vdW four-layer antiferromagnets through vdW assembly. These phenomena are absent in the bulk or thin-film in bulk-like stacking forms of MnBi2Te4.

cond-mat.mtrl-sci↗

Task-Specific Alignment and Multiple Level Transformer for Few-Shot Action Recognition

In the research field of few-shot learning, the main difference between image-based and video-based is the additional temporal dimension. In recent years, some works have used the Transformer to deal with frames, then get the attention feature and the enhanced prototype, and the results are competitive. However, some video frames may relate little to the action, and only using single frame-level or segment-level features may not mine enough information. We address these problems sequentially through an end-to-end method named "Task-Specific Alignment and Multiple-level Transformer Network (TSA-MLT)". The first module (TSA) aims at filtering the action-irrelevant frames for action duration alignment. Affine Transformation for frame sequence in the time dimension is used for linear sampling. The second module (MLT) focuses on the Multiple-level feature of the support prototype and query sample to mine more information for the alignment, which operates on different level features. We adopt a fusion loss according to a fusion distance that fuses the L2 sequence distance, which focuses on temporal order alignment, and the Optimal Transport distance, which focuses on measuring the gap between the appearance and semantics of the videos. Extensive experiments show our method achieves state-of-the-art results on the HMDB51 and UCF101 datasets and a competitive result on the benchmark of Kinetics and something 2-something V2 datasets. Our code is available at the URL: https://github.com/cofly2014/tsa-mlt.git

cs.CV↗

A protein network refinement method based on module discovery and biological information

The identification of essential proteins can help in understanding the minimum requirements for cell survival and development. Network-based centrality approaches are commonly used to identify essential proteins from protein-protein interaction networks (PINs). Unfortunately, these approaches are limited by the poor quality of the underlying PIN data. To overcome this problem, researchers have focused on the prediction of essential proteins by combining PINs with other biological data. In this paper, we proposed a network refinement method based on module discovery and biological information to obtain a higher quality PIN. First, to extract the maximal connected subgraph in the PIN and to divide it into different modules by using Fast-unfolding algorithm; then, to detect critical modules based on the homology information, subcellular localization information and topology information within each module, and to construct a more refined network (CM-PIN). To evaluate the effectiveness of the proposed method, we used 10 typical network-based centrality methods (LAC, DC, DMNC, NC, TP, LID, CC, BC, PR, LR) to compare the overall performance of the CM-PIN with those the refined dynamic protein network (RD-PIN). The experimental results showed that the CM-PIN was optimal in terms of precision-recall curve, jackknife curve and other criteria, and can help to identify essential proteins more accurately.

cs.CE↗

Robust Model Predictive Control for Enhanced Fast Charging on Electric Vehicles through Integrated Power and Thermal Management

This paper explores the synergies between integrated power and thermal management (iPTM) and battery charging in an electric vehicle (EV). A multi-objective model predictive control (MPC) framework is developed to optimize the fast charging performance while enforcing the constraints in the power and thermal loops. The approach takes into account the coupling of the battery and cabin thermal management. The case study of a commercial EV demonstrates that the proposed method can effectively meet the requirements of fast charging and thermal management when accurate preview information is available. However, failure to predict the charging event can result in performance degradation with longer charging time. A time-varying weighting strategy is proposed to enhance charging performance in the presence of uncertainty. This strategy leverages the battery state-of-charge (SOC) and adjusts the priority of the multi-objective MPC at different phases during charging. Simulated results using a commercial EV use case show improved robustness in charging time using the proposed strategy.

eess.SY↗

Minimum-dissipation model for large-eddy simulation in OpenFoam -A study on channel flow, periodic hills and flow over cylinder

The minimum-dissipation model is applied to turbulent channel flows up to $Re_τ= 2000$, flow past a circular cylinder at $Re=3900$, and flow over periodic hills at $Re=10595$. Numerical simulations are performed in OpenFOAM which is based on finite volume methods for discretizing partial differential equations. We use both symmetry-preserving discretizations and standard second-order accurate discretization methods in OpenFOAM on structured meshes. The results are compared to DNS and experimental data. The results of channel flow mainly demonstrate the static QR model performs equally well as the dynamic models while reducing the computational cost. The model constant $C=0.024$ gives the most accurate prediction, and the contribution of the sub-grid model decreases with the increase of the mesh resolution and becomes very small (less than 0.2 molecular viscosity) if the fine meshes are used. Furthermore, the QR model is able to predict the mean and rms velocity accurately up to $Re_τ= 2000$ without a wall damping function. The symmetry-preserving discretization outperforms the standard OpenFOAM discretization at $Re_τ=1000$. The results for the flow over a cylinder show that mean velocity, drag coefficient, and lift coefficient are in good agreement with the experimental data. The symmetry-preserving scheme with the QR model predicts the best results. The various comparisons carried out for flows over periodic hills demonstrate the need to use the symmetry-preserving discretization or central difference schemes in OpenFOAM in combination with the minimum dissipation model. The model constant of $C=0.024$ is again the best one.

physics.flu-dyn↗

Modification of Thermal Chemical Rates in a Cavity via Resonant Effects in the Collective Regime

The modification of thermal chemical rates in Fabry-Perot cavities, as observed in experiments, still poses theoretical challenges. While we have a better grasp of how the reactivity of isolated molecules and model systems changes under strong coupling, we lack a comprehensive understanding of the combined effects and the specific roles played by activated and spectator molecules during reactive events. In this study, we investigate an ensemble of randomly oriented gas-phase HONO molecules undergoing a cis-trans isomerization reaction on an ab-initio potential energy surface. Using the classical reactive flux method, we analyze the transmission coefficient and determine conditions that lead to accelerated rates within the collective regime. We identify two main mechanisms at work: firstly, spectator molecules enhance the cavity's ability to dissipate excess energy from the activated molecule post-reactive event. Additionally, the interaction between spectator molecules and the cavity gives rise to the creation of polaritonic modes. These modes then interact with the activated molecule at a shifted resonance frequency.

physics.chem-ph↗

CFD-based Design Optimization of Ducted Hydrokinetic Turbines

Hydrokinetic turbines extract kinetic energy from moving water to generate renewable electricity, thus contributing to sustainable energy production and reducing reliance on fossil fuels. It has been hypothesized that a duct can accelerate and condition the fluid flow passing the turbine blades, improving the overall energy extraction efficiency. However, no substantial evidence has been provided so far for hydrokinetic turbines. To investigate this problem, we perform a CFD-based optimization study with a blade-resolved Reynolds-averaged Navier--Stokes (RANS) solver to explore the design of a ducted hydrokinetic turbine that maximizes the efficiency of energy extraction. To handle the high-dimensional design space of the blade and duct geometry, we use a gradient-based optimization approach where the gradients are computed using the adjoint method. The final design is re-evaluated through higher-fidelity unsteady RANS (URANS) simulations. Our optimized ducted turbine achieves an efficiency of about 54% over a range of operating conditions, higher than the typical 46% efficiency of unducted turbines such as the well-known Bahaj model.

physics.flu-dyn↗

Cascading Residual Graph Convolutional Network for Multi-Behavior Recommendation

Multi-behavior recommendation exploits multiple types of user-item interactions to alleviate the data sparsity problem faced by the traditional models that often utilize only one type of interaction for recommendation. In real scenarios, users often take a sequence of actions to interact with an item, in order to get more information about the item and thus accurately evaluate whether an item fits personal preference. Those interaction behaviors often obey a certain order, and different behaviors reveal different information or aspects of user preferences towards the target item. Most existing multi-behavior recommendation methods take the strategy to first extract information from different behaviors separately and then fuse them for final prediction. However, they have not exploited the connections between different behaviors to learn user preferences. Besides, they often introduce complex model structures and more parameters to model multiple behaviors, largely increasing the space and time complexity. In this work, we propose a lightweight multi-behavior recommendation model named Cascading Residual Graph Convolutional Network (CRGCN for short), which can explicitly exploit the connections between different behaviors into the embedding learning process without introducing any additional parameters. In particular, we design a cascading residual graph convolutional network structure, which enables our model to learn user preferences by continuously refining user embeddings across different types of behaviors. The multi-task learning method is adopted to jointly optimize our model based on different behaviors. Extensive experimental results on two real-world benchmark datasets show that CRGCN can substantially outperform state-of-the-art methods. Further studies also analyze the effects of leveraging multi-behaviors in different numbers and orders on the final performance.

cs.IR↗

MB-HGCN: A Hierarchical Graph Convolutional Network for Multi-behavior Recommendation

Collaborative filtering-based recommender systems that rely on a single type of behavior often encounter serious sparsity issues in real-world applications, leading to unsatisfactory performance. Multi-behavior Recommendation (MBR) is a method that seeks to learn user preferences, represented as vector embeddings, from auxiliary information. By leveraging these preferences for target behavior recommendations, MBR addresses the sparsity problem and improves the accuracy of recommendations. In this paper, we propose MB-HGCN, a novel multi-behavior recommendation model that uses a hierarchical graph convolutional network to learn user and item embeddings from coarse-grained on the global level to fine-grained on the behavior-specific level. Our model learns global embeddings from a unified homogeneous graph constructed by the interactions of all behaviors, which are then used as initialized embeddings for behavior-specific embedding learning in each behavior graph. We also emphasize the distinct of the user and item behaviorspecific embeddings and design two simple-yet-effective strategies to aggregate the behavior-specific embeddings for users and items, respectively. Finally, we adopt multi-task learning for optimization. Extensive experimental results on three real-world datasets demonstrate that our model significantly outperforms the baselines, achieving a relative improvement of 73.93% and 74.21% for HR@10 and NDCG@10, respectively, on the Tmall datasets.

cs.IR↗

Introduction of an intriguing approach for eletric current transformer on-site examining repairing

The working principle of a electric current transformer is based on electromagnetic induction, mainly composed of a closed iron core and windings. Its primary winding has relatively few turns and is connected in series with the current circuit to be measured. However, due to the frequent occurrence of full current passing through the current transformer during use, its secondary winding has relatively more turns. During use, errors may occur in the current transformer. Therefore, technical personnel can adopt the heterodyne measurement method to shield interference signals and ensure the accuracy of measurements during on-site examining and repairing of current transformers. This article mainly introduces the characteristics of transformers and their on-site examining and repairing process and errors, and describes the specific application of heterodyne measurement in on-site examining and repairing of current transformers.

eess.SY↗

The NTSC VLBI System and its application in UT1 measurement

In order to measure the Universal Time (UT1) in real time, National Time Service Center (NTSC) has built a VGOS-like (VLBI Global Observing System) broadband VLBI network, which includes three 13-m radio telescopes located in Jilin, Sanya and Kashi, and a data analysis center in Xi'an. Each station is equipped with a highly stable hydrogen atomic clock and a self-developed VLBI backend, and is co-located with two GPS receivers. This VGOS-like VLBI network may play an important role in improving the Chinese broadband VLBI technology and making valuable contributions to domestic VLBI measurements of UT1. In this paper, we introduce the specifications of this VLBI network, and present the UT1 measurements at C-band conducted in 2018 using the Jilin-Kashi baseline of this network. The comparisons between our UT1 estimates and those provided by IERS suggest that the NTSC VLBI network is capable to determine UT1 accurate at the level of 58.8 microseconds.

astro-ph.IM↗

Control Co-design of a Hydrokinetic Turbine: A Comparative Study of Open-loop Optimal Control and Feedback Control

Control co-design (CCD) explores physical and control design spaces simultaneously to optimize a system's performance. A commonly used CCD framework aims to achieve open-loop optimal control (OLOC) trajectory while optimizing the physical design variables subject to constraints on control and design parameters. In this study, in contrast with the conventional CCD methods based on OLOC schemes, we present a CCD formulation that explicitly considers a feedback controller. In the formulation, we consider two control laws based on proportional linear and quadratic state feedback, where the control gain is optimized. The simulation results show that the OLOC trajectory could be approximated by a feedback controller. While the total energy generated from the CCD with a feedback controller is slightly lower than that of the CCD with OLOC, it results in a much simpler control structure and more robust performance in the presence of uncertainties and disturbances, making it suitable for real-time control. The study in this paper investigates the performance of optimal hydrokinetic turbine design with a feedback controller in the presence of uncertainties and disturbances to demonstrate the benefits and highlight challenges associated with incorporating the feedback controller explicitly in the CCD stage.

eess.SY↗