Searcharxiv⌕ Search

arXiv subjects

Jing Sun

Publications and source records attributed to Jing Sun.

At least 91 records · Page 5Linked to original sources

Sharp error estimates for spatial-temporal finite difference approximations to fractional sub-diffusion equation without regularity assumption on the exact solution

Finite difference method as a popular numerical method has been widely used to solve fractional diffusion equations. In the general spatial error analyses, an assumption $u\in C^{4}(\barΩ)$ is needed to preserve $\mathcal{O}(h^{2})$ convergence when using central finite difference scheme to solve fractional sub-diffusion equation with Laplace operator, but this assumption is somewhat strong, where $u$ is the exact solution and $h$ is the mesh size. In this paper, a novel analysis technique is proposed to show that the spatial convergence rate can reach $\mathcal{O}(h^{\min(σ+\frac{1}{2}-ε,2)})$ in both $l^{2}$-norm and $l^{\infty}$-norm in one-dimensional domain when the initial value and source term are both in $\hat{H}^σ(Ω)$ but without any regularity assumption on the exact solution, where $σ\geq 0$ and $ε>0$ being arbitrarily small. After making slight modifications on the scheme, acting on the initial value and source term, the spatial convergence rate can be improved to $\mathcal{O}(h^{2})$ in $l^{2}$-norm and $\mathcal{O}(h^{\min(σ+\frac{3}{2}-ε,2)})$ in $l^{\infty}$-norm. It's worth mentioning that our spatial error analysis is applicable to high dimensional cube domain by using the properties of tensor product. Moreover, two kinds of averaged schemes are provided to approximate the Riemann--Liouville fractional derivative, and $\mathcal{O}(τ^{2})$ convergence is obtained for all $α\in(0,1)$. Finally, some numerical experiments verify the effectiveness of the built theory.

math.NA↗

Energy-optimal Three-dimensional Path-following Control of Autonomous Underwater Vehicles under Ocean Currents

This paper presents a three-dimensional (3D) energy-optimal path-following control design for autonomous underwater vehicles subject to ocean currents. The proposed approach has a two-stage control architecture consisting of the setpoint computation and the setpoint tracking. In the first stage, the surge velocity, heave velocity, and pitch angle setpoints are optimized by minimizing the required vehicle propulsion energy under currents, and the line-of-sight (LOS) guidance law is used to generate the yaw angle setpoint that ensures path following. In the second stage, two model predictive controllers are designed to control the vehicle motion in the horizontal and vertical planes by tracking the optimal setpoints. The proposed controller is compared with a conventional LOS-based control that maintains zero heave velocity relative to the current (i.e., relative heave velocity) and derives pitch angle setpoint using LOS guidance to reach the desired depth. Through simulations, we show that the proposed approach can achieve more than 13% energy saving on a lawnmower-type and an inspection mission under different ocean current conditions. The simulation results demonstrate that allowing motions with non-zero relative heave velocity improves energy efficiency in 3D path-following applications.

eess.SY↗

Optimal convergence for the regularized solution of the model describing the competition between super- and sub- diffusions driven by fractional Brownian sheet noise

Super- and sub- diffusions are two typical types of anomalous diffusions in the natural world. In this work, we discuss the numerical scheme for the model describing the competition between super- and sub- diffusions driven by fractional Brownian sheet noise. Based on the obtained regulization result of the solution by using the properties of Mittag-Leffler function and the regularized noise by Wong-Zakai approximation, we make full use of the regularity of the solution operators to achieve optimal convergence of the regularized solution. The spectral Galerkin method and the Mittag-Leffler Euler integrator are respectively used to deal with the space and time operators. In particular, by contour integral, the fast evaluation of the Mittag-Leffler Euler integrator is realized. We provide complete error analyses, which are verified by the numerical experiments.

math.NA↗

Liuer Mihou: A Practical Framework for Generating and Evaluating Grey-box Adversarial Attacks against NIDS

Due to its high expressiveness and speed, Deep Learning (DL) has become an increasingly popular choice as the detection algorithm for Network-based Intrusion Detection Systems (NIDSes). Unfortunately, DL algorithms are vulnerable to adversarial examples that inject imperceptible modifications to the input and cause the DL algorithm to misclassify the input. Existing adversarial attacks in the NIDS domain often manipulate the traffic features directly, which hold no practical significance because traffic features cannot be replayed in a real network. It remains a research challenge to generate practical and evasive adversarial attacks. This paper presents the Liuer Mihou attack that generates practical and replayable adversarial network packets that can bypass anomaly-based NIDS deployed in the Internet of Things (IoT) networks. The core idea behind Liuer Mihou is to exploit adversarial transferability and generate adversarial packets on a surrogate NIDS constrained by predefined mutation operations to ensure practicality. We objectively analyse the evasiveness of Liuer Mihou against four ML-based algorithms (LOF, OCSVM, RRCF, and SOM) and the state-of-the-art NIDS, Kitsune. From the results of our experiment, we gain valuable insights into necessary conditions on the adversarial transferability of anomaly detection algorithms. Going beyond a theoretical setting, we replay the adversarial attack in a real IoT testbed to examine the practicality of Liuer Mihou. Furthermore, we demonstrate that existing feature-level adversarial defence cannot defend against Liuer Mihou and constructively criticise the limitations of feature-level adversarial defences.

cs.CR↗

On the Suppression and Enhancement of Thermal Chemical Rates in a Cavity

The observed modification of thermal chemical rates in Fabry-Perot cavities remains a poorly understood effect theoretically. Recent breakthroughs explain some of the observations through the Grote-Hynes theory, where the cavity introduces friction with the reaction coordinate, thus reducing the transmission coefficient and the rate. The regime of rate enhancement, the observed sharp resonances at varying cavity frequencies, and the survival of these effects in the collective regime remain mostly unexplained. In this paper, we consider the \emph{cis}-\emph{trans} isomerization of HONO atomistically using an \emph{ab-initio} potential energy surface. We evaluate the transmission coefficient using the reactive flux method and identify the conditions for rate acceleration. In the underdamped, low-friction regime of the reaction coordinate, the cavity coupling enhances the rate with increasing coupling strength until reaching the Kramers turnover point. Sharp resonances in this regime are related to cavity-enabled energy redistribution channels.

physics.chem-ph↗

Control Co-design of a Hydrokinetic Turbine with Open-loop Optimal Control

This paper introduces a control co-design (CCD) framework to simultaneously explore the physical parameters and control spaces for a hydro-kinetic turbine (HKT) rotor optimization. The optimization formulation incorporates a coupled dynamic-hydrodynamic model to maximize the rotor power efficiency for various time-variant flow profiles. The open-loop optimal control is applied for maximum power tracking, and the blade element momentum theory (BEMT) is used to model the hydrodynamics. Case studies with different control constraints are investigated for CCD. Sensitivity analyses were conducted with respect to different flow profiles and initial geometries. Comparisons are made between CCD and the sequential process, with physical design followed by a control design process under the same conditions. The results demonstrate the benefits of CCD and reveal that, with control constraints, CCD leads to increased energy production compared to the design obtained from the sequential design process.

eess.SY↗

A stochastic reduced-order model for statistical microstructure descriptors evolution

Integrated Computational Materials Engineering (ICME) models have been a crucial building block for modern materials development, relieving heavy reliance on experiments and significantly accelerating the materials design process. However, ICME models are also computationally expensive, particularly with respect to time integration for dynamics, which hinders the ability to study statistical ensembles and thermodynamic properties of large systems for long time scales. To alleviate the computational bottleneck, we propose to model the evolution of statistical microstructure descriptors as a continuous-time stochastic process using a non-linear Langevin equation, where the probability density function (PDF) of the statistical microstructure descriptors, which are also the quantities of interests (QoIs), are modeled by the Fokker-Planck equation. We discuss how to calibrate the drift and diffusion terms of the Fokker-Planck equation from the theoretical and computational perspectives. The calibrated Fokker-Planck equation can be used as a stochastic reduced-order model (ROM) to simulate the microstructure evolution of statistical microstructure descriptors PDF. Considering statistical microstructure descriptors in the microstructure evolution as QoIs, we demonstrate our proposed methodology in three integrated computational materials engineering (ICME) models: kinetic Monte Carlo, phase field, and molecular dynamics simulations.

cs.CE↗

Numerical Approximation for Stochastic Nonlinear Fractional Diffusion Equation Driven by Rough Noise

In this work, we are interested in building the fully discrete scheme for stochastic fractional diffusion equation driven by fractional Brownian sheet which is temporally and spatially fractional with Hurst parameters $H_{1}, H_{2} \in(0,\frac{1}{2}]$. We first provide the regularity of the solution. Then we employ the Wong-Zakai approximation to regularize the rough noise and discuss the convergence of the approximation. Next, the finite element and backward Euler convolution quadrature methods are used to discretize spatial and temporal operators for the obtained regularized equation, and the detailed error analyses are developed. Finally, some numerical examples are presented to confirm the theory.

math.NA↗

Eco-Coasting Strategies Using Road Grade Preview: Evaluation and Online Implementation Based on Mixed Integer Model Predictive Control

Coasting has been widely used in the eco-driving guidelines to reduce fuel consumption by profiting from kinetic energy. However, the comprehensive comparison between different coasting strategies and online performance of the eco-coasting strategy using road grade preview are still unclear because of the oversimplification and the integer variable in the optimal control problems. Herein, two different coasting strategies (fuel cut-off and engine start/stop) are proposed to reveal the potential benefit of eco-coasting using the road grade preview. Engine drag torque and energy cost used for engine restart are considered in the modeling to give a fair evaluation of the offline and online performance. The offline performance of these two coasting methods is evaluated through dynamic programming (DP) under various driving scenarios with different slope profiles. Offline simulation shows that the engine start/stop method outperforms the fuel cut-off method in terms of fuel consumption and travel time by getting rid of the engine drag torque. Then, online performance of these two coasting methods is evaluated using Mixed Integer Model Predictive Control (MIMPC). A novel operational constraint on the minimum off steps is added in the MIMPC formulation to avoid frequent switch of the integer variables which represent the fuel cut-off and the engine start/stop mechanism. Simulation results show that, for both fuel cut-off and engine start/stop coasting methods, the MPC controller reduces fuel consumption to a level comparable to DP without sacrificing the travel time.

eess.SY↗

Regularity theory and numerical algorithm for the fractional Klein-Kramers equation

Fractional Klein-Kramers equation can well describe subdiffusion in phase space. In this paper, we develop the fully discrete scheme for fractional Klein-Kramers equation based on the backward Euler convolution quadrature and local discontinuous Galerkin methods. Thanks to the obtained sharp regularity estimates in temporal and spatial directions after overcoming the hypocoercivity of the operator, the complete error analyses of the fully discrete scheme are built. % , the main challenge of which comes from the hypocoercivity of the operator. It's worth mentioning that the convergence of the provided scheme is independent of the temporal regularity of the exact solution. Finally, numerical results are proposed to verify the correctness of the theoretical results.

math.NA↗

Artificial Neural Network and its Application Research Progress in Distillation

Artificial neural networks learn various rules and algorithms to form different ways of processing information, and have been widely used in various chemical processes. Among them, with the development of rectification technology, its production scale continues to expand, and its calculation requirements are also more stringent, because the artificial neural network has the advantages of self-learning, associative storage and high-speed search for optimized solutions, it can make high-precision simulation predictions for rectification operations, so it is widely used in the chemical field of rectification. This article gives a basic overview of artificial neural networks, and introduces the application research of artificial neural networks in distillation at home and abroad.

cs.LG↗

PSSPR: A Source Location Privacy Protection Scheme Based on Sector Phantom Routing in WSNs

Source location privacy (SLP) protection is an emerging research topic in wireless sensor networks (WSNs). Because the source location represents the valuable information of the target being monitored and tracked, it is of great practical significance to achieve a high degree of privacy of the source location. Although many studies based on phantom nodes have alleviates the protection of source location privacy to some extent. It is urgent to solve the problems such as complicate the ac path between nodes, improve the centralized distribution of Phantom nodes near the source nodes and reduce the network communication overhead. In this paper, PSSPR routing is proposed as a visable approach to address SLP issues. We use the coordinates of the center node V to divide sector-domain, which act as important role in generating a new phantom nodes. The phantom nodes perform specified routing policies to ensure that they can choose various locations. In addition, the directed random route can ensure that data packets avoid the visible range when they move to the sink node hop by hop. Thus, the source location is protected. Theoretical analysis and simulation experiments show that this protocol achieves higher security of source node location with less communication overhead.

cs.NI↗

A bosonic perspective on the classical mapping of fermionic quantum dynamics

We consider the application of the original Meyer-Miller (MM) Hamiltonian to mapping fermionic quantum dynamics to classical equations of motion. Non-interacting fermionic and bosonic systems share the same one-body density dynamics when evolving from the same initial many-body state. The MM classical mapping is exact for non-interacting bosons, and therefore it yields the exact time-dependent one-body density for non-interacting fermions as well. Starting from this observation, the MM mapping is compared to different mappings specific for fermionic systems, namely the spin mapping (SM) with and without including a Jordan-Wigner transformation, and the Li-Miller mapping (LMM). For non-interacting systems, the inclusion of fermionic anti-symmetry through the Jordan-Wigner transform does not lead to any improvement in the performance of the mappings and instead it worsens the classical description. For an interacting impurity model and for models of excitonic energy transfer, the MM and LMM mappings perform similarly, and in some cases the former outperforms the latter when compared to a full quantum description. The classical mappings are able to capture interference effects, both constructive and destructive, that originate from equivalent energy transfer pathways in the models.

physics.chem-ph↗

Numerical approximations for the fractional Fokker-Planck equation with two-scale diffusion

Fractional Fokker-Planck equation plays an important role in describing anomalous dynamics. To the best of our knowledge, the existing discussions mainly focus on this kind of equation involving one diffusion operator. In this paper, we first derive the fractional Fokker-Planck equation with two-scale diffusion from the Lévy process framework, and then the fully discrete scheme is built by using the $L_{1}$ scheme for time discretization and finite element method for space. With the help of the sharp regularity estimate of the solution, we optimally get the spatial and temporal error estimates. Finally, we validate the effectiveness of the provided algorithm by extensive numerical experiments.

math.NA↗

An Empirical Study on End-to-End Singing Voice Synthesis with Encoder-Decoder Architectures

With the rapid development of neural network architectures and speech processing models, singing voice synthesis with neural networks is becoming the cutting-edge technique of digital music production. In this work, in order to explore how to improve the quality and efficiency of singing voice synthesis, in this work, we use encoder-decoder neural models and a number of vocoders to achieve singing voice synthesis. We conduct experiments to demonstrate that the models can be trained using voice data with pitch information, lyrics and beat information, and the trained models can produce smooth, clear and natural singing voice that is close to real human voice. As the models work in the end-to-end manner, they allow users who are not domain experts to directly produce singing voice by arranging pitches, lyrics and beats.

cs.SD↗

aphBO-2GP-3B: A budgeted asynchronous parallel multi-acquisition functions for constrained Bayesian optimization on high-performing computing architecture

High-fidelity complex engineering simulations are highly predictive, but also computationally expensive and often require substantial computational efforts. The mitigation of computational burden is usually enabled through parallelism in high-performance cluster (HPC) architecture. In this paper, an asynchronous constrained batch-parallel Bayesian optimization method is proposed to efficiently solve the computationally-expensive simulation-based optimization problems on the HPC platform, with a budgeted computational resource, where the maximum number of simulations is a constant. The advantages of this method are three-fold. First, the efficiency of the Bayesian optimization is improved, where multiple input locations are evaluated massively parallel in an asynchronous manner to accelerate the optimization convergence with respect to physical runtime. This efficiency feature is further improved so that when each of the inputs is finished, another input is queried without waiting for the whole batch to complete. Second, the method can handle both known and unknown constraints. Third, the proposed method considers several acquisition functions at the same time and sample based on an evolving probability mass distribution function using a modified GP-Hedge scheme, where parameters are corresponding to the performance of each acquisition function. The proposed framework is termed aphBO-2GP-3B, which corresponds to asynchronous parallel hedge Bayesian optimization with two Gaussian processes and three batches. The aphBO-2GP-3B framework is demonstrated using two high-fidelity expensive industrial applications, where the first one is based on finite element analysis (FEA) and the second one is based on computational fluid dynamics (CFD) simulations.

stat.ML↗

Experimental Validation of Eco-Driving and Eco-Heating Strategies for Connected and Automated HEVs

This paper presents experimental results that validate eco-driving and eco-heating strategies developed for connected and automated vehicles (CAVs). By exploiting vehicle-to-infrastructure (V2I) communications, traffic signal timing, and queue length estimations, optimized and smoothed speed profiles for the ego-vehicle are generated to reduce energy consumption. Next, the planned eco-trajectories are incorporated into a real-time predictive optimization framework that coordinates the cabin thermal load (in cold weather) with the speed preview, i.e., eco-heating. To enable eco-heating, the engine coolant (as the only heat source for cabin heating) and the cabin air are leveraged as two thermal energy storages. Our eco-heating strategy stores thermal energy in the engine coolant and cabin air while the vehicle is driving at high speeds, and releases the stored energy slowly during the vehicle stops for cabin heating without forcing the engine to idle to provide the heating source. To test and validate these solutions, a power-split hybrid electric vehicle (HEV) has been instrumented for cabin thermal management, allowing to regulate heating, ventilation, and air conditioning (HVAC) system inputs (cabin temperature setpoint and blower flow rate) in real-time. Experiments were conducted to demonstrate the energy-saving benefits of eco-driving and eco-heating strategies over real-world city driving cycles at different cold ambient temperatures. The data confirmed average fuel savings of 14.5% and 4.7% achieved by eco-driving and eco-heating, respectively, offering a combined energy saving of more than 19% when comparing to the baseline vehicle driven by a human driver with a constant-heating strategy.

eess.SY↗

Finite difference method for inhomogeneous fractional Dirichlet problem

We make the split of the integral fractional Laplacian as $(-Δ)^s u=(-Δ)(-Δ)^{s-1}u$, where $s\in(0,\frac{1}{2})\cup(\frac{1}{2},1)$. Based on this splitting, we respectively discretize the one- and two-dimensional integral fractional Laplacian with the inhomogeneous Dirichlet boundary condition and give the corresponding truncation errors with the help of the interpolation estimate. Moreover, the suitable corrections are proposed to guarantee the convergence in solving the inhomogeneous fractional Dirichlet problem and an $\mathcal{O}(h^{1+α-2s})$ convergence rate is obtained when the solution $u\in C^{1,α}(\barΩ^δ_{n})$, where $n$ is the dimension of the space, $α\in(\max(0,2s-1),1]$, $δ$ is a fixed positive constant, and $h$ denotes mesh size. Finally, the performed numerical experiments confirm the theoretical results.

math.NA↗