Searcharxiv⌕ Search

arXiv subjects

Jinwoo Hwang

Publications and source records attributed to Jinwoo Hwang.

At least 55 records · Page 3Linked to original sources

Booster-SHOT: Boosting Stacked Homography Transformations for Multiview Pedestrian Detection with Attention

Improving multi-view aggregation is integral for multi-view pedestrian detection, which aims to obtain a bird's-eye-view pedestrian occupancy map from images captured through a set of calibrated cameras. Inspired by the success of attention modules for deep neural networks, we first propose a Homography Attention Module (HAM) which is shown to boost the performance of existing end-to-end multiview detection approaches by utilizing a novel channel gate and spatial gate. Additionally, we propose Booster-SHOT, an end-to-end convolutional approach to multiview pedestrian detection incorporating our proposed HAM as well as elements from previous approaches such as view-coherent augmentation or stacked homography transformations. Booster-SHOT achieves 92.9% and 94.2% for MODA on Wildtrack and MultiviewX respectively, outperforming the state-of-the-art by 1.4% on Wildtrack and 0.5% on MultiviewX, achieving state-of-the-art performance overall for standard evaluation metrics used in multi-view pedestrian detection.

cs.CV↗

Anisotropic Magnetoresistance and Nontrivial Spin Hall Magnetoresistance in Pt/$α$-Fe$_2$O$_3$ Bilayers

To date, magnetic proximity effect (MPE) has only been conclusively observed in ferromagnet (FM) based systems. We report the observation of anomalous Hall effect and anisotropic magnetoresistance in angular dependent magnetoresistance (ADMR) measurements in Pt on antiferromagnetic (AF) $α$-Fe$_2$O$_3$(0001) epitaxial films at 10 K, which provide evidence for the MPE. The Néel order of $α$-Fe$_2$O$_3$ and the induced magnetization in Pt show a unique ADMR compared with all other FM and AF systems. A macrospin response model is established and can explain the AF spin configuration and all main ADMR features in the Pt/$α$-Fe$_2$O$_3$ bilayers.

cond-mat.mtrl-sci↗

Electrical Switching of Tristate Antiferromagnetic Néel Order in $α$-Fe$_{2}$O$_{3}$ Epitaxial Films

The ability to manipulate antiferromagnetic (AF) moments is a key requirement for the emerging field of antiferromagnetic spintronics. Electrical switching of bi-state AF moments has been demonstrated in metallic AFs, CuMnAs and Mn$_2$Au. Recently, current-induced "saw-tooth" shaped Hall resistance was reported in Pt/NiO bilayers, while its mechanism is under debate. Here, we report the first demonstration of convincing, non-decaying, step-like electrical switching of tri-state Néel order in Pt/$α$-Fe$_2$O$_3$ bilayers. Our experimental data, together with Monte-Carlo simulations, reveal the clear mechanism of the switching behavior of $α$-Fe$_2$O$_3$ Néel order among three stable states. We also show that the observed "saw-tooth" Hall resistance is due to an artifact of Pt, not AF switching, while the signature of AF switching is step-like Hall signals. This demonstration of electrical control of magnetic moments in AF insulator (AFI) films will greatly expand the scope of AF spintronics by leveraging the large family of AFIs.

cond-mat.mes-hall↗

Privacy Safe Representation Learning via Frequency Filtering Encoder

Deep learning models are increasingly deployed in real-world applications. These models are often deployed on the server-side and receive user data in an information-rich representation to solve a specific task, such as image classification. Since images can contain sensitive information, which users might not be willing to share, privacy protection becomes increasingly important. Adversarial Representation Learning (ARL) is a common approach to train an encoder that runs on the client-side and obfuscates an image. It is assumed, that the obfuscated image can safely be transmitted and used for the task on the server without privacy concerns. However, in this work, we find that training a reconstruction attacker can successfully recover the original image of existing ARL methods. To this end, we introduce a novel ARL method enhanced through low-pass filtering, limiting the available information amount to be encoded in the frequency domain. Our experimental results reveal that our approach withstands reconstruction attacks while outperforming previous state-of-the-art methods regarding the privacy-utility trade-off. We further conduct a user study to qualitatively assess our defense of the reconstruction attack.

cs.CV↗

CoVA: Exploiting Compressed-Domain Analysis to Accelerate Video Analytics

Modern retrospective analytics systems leverage cascade architecture to mitigate bottleneck for computing deep neural networks (DNNs). However, the existing cascades suffer two limitations: (1) decoding bottleneck is either neglected or circumvented, paying significant compute and storage cost for pre-processing; and (2) the systems are specialized for temporal queries and lack spatial query support. This paper presents CoVA, a novel cascade architecture that splits the cascade computation between compressed domain and pixel domain to address the decoding bottleneck, supporting both temporal and spatial queries. CoVA cascades analysis into three major stages where the first two stages are performed in compressed domain while the last one in pixel domain. First, CoVA detects occurrences of moving objects (called blobs) over a set of compressed frames (called tracks). Then, using the track results, CoVA prudently selects a minimal set of frames to obtain the label information and only decode them to compute the full DNNs, alleviating the decoding bottleneck. Lastly, CoVA associates tracks with labels to produce the final analysis results on which users can process both temporal and spatial queries. Our experiments demonstrate that CoVA offers 4.8x throughput improvement over modern cascade systems, while imposing modest accuracy loss.

cs.CV↗

Multiplication of freestanding semiconductor membranes from a single wafer by advanced remote epitaxy

Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to harvest epitaxial layers using practical processes. Here, we demonstrate a method to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, 2D materials are directly formed on III-N and III-V substrates in epitaxy systems, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of 2D materials and epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because 2D materials allow peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.

physics.app-ph↗

Kinetically-controlled epitaxial growth of Fe$_3$GeTe$_2$ van der Waals ferromagnetic films

We demonstrate that kinetics play an important role in the epitaxial growth of Fe$_3$GeTe$_2$ (FGT) van der Waals (vdW) ferromagnetic films by molecular beam epitaxy. By varying the deposition rate, we control the formation or suppression of an initial tellurium-deficient non-van der Waals phase (Fe$_3$Ge$_2$) prior to realizing epitaxial growth of the vdW FGT phase. Using cross-sectional scanning transmission electron microscopy and scanning tunneling microscopy, we optimize the FGT films to have atomically smooth surfaces and abrupt interfaces with the Ge(111) substrate. The magnetic properties of our high quality material are confirmed through magneto-optic, magnetotransport, and spin-polarized STM studies. Importantly, this demonstrates how the interplay of energetics and kinetics can help tune the re-evaporation rate of chalcogen atoms and interdiffusion from the underlayer, which paves the way for future studies of van der Waals epitaxy.

cond-mat.mtrl-sci↗

Experimental determination of the valence band offsets of $ZnGeN_2$ and $ZnGe_{0.94}Ga_{0.12}N_2$ with $GaN$

A predicted type-II staggered band alignment with an approximately $1.4 eV$ valence band offset at the $ZnGeN_2/GaN$ heterointerface has inspired novel band-engineered $III-N/ZnGeN_2$ heterostructure-based device designs for applications in high performance optoelectronics. We report on the determination of the valence band offset between metalorganic chemical vapor deposition grown $(ZnGe)_{1-x}Ga_{2x}N_2$, for $x = 0$ and $0.06$, and $GaN$ using X-ray photoemission spectroscopy. The valence band of $ZnGeN_2$ was found to lie $1.45-1.65 eV$ above that of $GaN$. This result agrees well with the value predicted by first-principles density functional theory calculations using the local density approximation for the potential profile and quasiparticle self-consistent GW calculations of the band edge states relative to the potential. For $(ZnGe)_{0.94}Ga_{0.12}N_2$ the value was determined to be $1.29 eV$, $~10-20\%$ lower than that of $ZnGeN_2$. The experimental determination of the large band offset between $ZnGeN_2$ and $GaN$ provides promising alternative solutions to address challenges faced with pure III-nitride-based structures and devices.

cond-mat.mtrl-sci↗

Field-free deterministic switching of a perpendicularly polarized magnet using unconventional spin-orbit torques in WTe2

Spin-orbit torque (SOT) driven deterministic control of the magnetization state of a magnet with perpendicular magnetic anisotropy (PMA) is key to next generation spintronic applications including non-volatile, ultrafast, and energy efficient data storage devices. But, field-free deterministic switching of perpendicular magnetization remains a challenge because it requires an out-of-plane anti-damping torque, which is not allowed in conventional spin source materials such as heavy metals (HM) and topological insulators due to the system's symmetry. The exploitation of low-crystal symmetries in emergent quantum materials offers a unique approach to achieve SOTs with unconventional forms. Here, we report the first experimental realization of field-free deterministic magnetic switching of a perpendicularly polarized van der Waals (vdW) magnet employing an out-of-plane anti-damping SOT generated in layered WTe2 which is a low-crystal symmetry quantum material. The numerical simulations confirm that out-of-plane antidamping torque in WTe2 is responsible for the observed magnetization switching in the perpendicular direction.

cond-mat.mes-hall↗

Coherent Growth and Characterization of van der Waals 1T-VSe$_2$ Layers on GaAs(111)B Using Molecular Beam Epitaxy

We report epitaxial growth of vanadium diselenide (VSe$_2$) thin films in the octahedrally-coordinated (1T) structure on GaAs(111)B substrates by molecular beam epitaxy. Film thickness from a single monolayer (ML) up to 30 ML is demonstrated. Structural and chemical studies using by x-ray diffraction, transmission electron microscopy, scanning tunneling microscopy and x-ray photoelectron spectroscopy indicate high quality thin films. Further studies show that monolayer VSe$_2$ films on GaAs are not air-stable and are susceptible to oxidation within a matter of hours, which indicates that a protective capping layer should be employed for device applications. This work demonstrates that VSe$_2$, a candidate van der Waals material for possible spintronic and electronic applications, can be integrated with III-V semiconductors via epitaxial growth for 2D/3D hybrid devices.

cond-mat.mtrl-sci↗

Magnetic Properties and Electronic Structure of Magnetic Topological Insulator MnBi$_2$Se$_4$

The intrinsic magnetic topological insulators MnBi$_2$X$_4$ (X = Se, Te) are promising candidates in realizing various novel topological states related to symmetry breaking by magnetic order. Although much progress had been made in MnBi$_2$Te$_4$, the study of MnBi$_2$Se$_4$ has been lacking due to the difficulty of material synthesis of the desired trigonal phase. Here, we report the synthesis of multilayer trigonal MnBi$_2$Se$_4$ with alternating-layer molecular beam epitaxy. Atomic-resolution scanning transmission electron microscopy (STEM) and scanning tunneling microscopy (STM) identify a well-ordered multilayer van der Waals (vdW) crystal with septuple-layer base units in agreement with the trigonal structure. Systematic thickness-dependent magnetometry studies illustrate the layered antiferromagnetic ordering as predicted by theory. Angle-resolved photoemission spectroscopy (ARPES) reveals the gapless Dirac-like surface state of MnBi$_2$Se$_4$, which demonstrates that MnBi$_2$Se$_4$ is a topological insulator above the magnetic ordering temperature. These systematic studies show that MnBi$_2$Se$_4$ is a promising candidate for exploring the rich topological phases of layered antiferromagnetic topological insulators.

cond-mat.mtrl-sci↗

Structural Heterogeneity, Ductility, and Glass Forming Ability of Zr-Based Metallic Glasses

We show the correlation between nanoscale structural heterogeneity and mechanical property and glass forming ability of Zr-based metallic glasses (MGs). Detailed parameters of medium range ordering (MRO) that constitutes the structural heterogeneity, including the type, size, and volume fraction of MRO domains determined using 4-dimensional scanning transmission electron microscopy, directly correlate with the ductility and glass forming ability of Zr-Cu-Co-Al MGs. Mesoscale deformation simulation incorporating the experimentally determined MRO confirms that the diverse types and sizes of MRO can significantly influence the MGs' mechanical behavior.

cond-mat.mtrl-sci↗

Unusual Formation of Point Defect Complexes in the Ultra-wide Band Gap Semiconductor beta-Ga2O3

Understanding the unique properties of ultra-wide band gap semiconductors requires detailed information about the exact nature of point defects and their role in determining the properties. Here, we report the first direct microscopic observation of an unusual formation of point defect complexes within the atomic scale structure of beta-Ga2O3 using high resolution scanning transmission electron microscopy (STEM). Each complex involves one cation interstitial atom paired with two cation vacancies. These divacancy - interstitial complexes correlate directly with structures obtained by density functional theory, which predicts them to be compensating acceptors in beta-Ga2O3. This prediction is confirmed by a comparison between STEM data and deep level optical spectroscopy results, which reveals that these complexes correspond to a deep trap within the band gap, and that the development of the complexes is facilitated by Sn doping through the increase in vacancy concentration. These findings provide new insight on this emerging material's unique response to the incorporation of impurities that can critically influence their properties.

cond-mat.mtrl-sci↗

High Mobility 2DEG in modulation-doped \b{eta}-(AlxGa1-x)2O3/Ga2O3 heterostructures

Beta-phase Ga2O3 has emerged as a promising candidate for a wide range of device applications, including power electronic devices, radio-frequency devices and solar-blind photodetectors. The wide bandgap energy and the predicted high breakdown field, together with the availability of low-cost native substrates, make \b{eta}-Ga2O3 a promising material compared to other conventional wide bandgap materials, such as GaN and SiC. Alloying of Al with \b{eta}-Ga2O3 could enable even larger band gap materials, and provide more flexibility for electronic and optoelectronic device design. In this work, we demonstrate a high mobility two-dimensional electron gas (2DEG) formed at the \b{eta}-(AlxGa1-x)2O3/Ga2O3 interface through modulation doping. Shubnikov-de Haas oscillation was observed for the first time in the modulation-doped \b{eta}-(AlxGa1-x)2O3/Ga2O3 structure, indicating a high-quality channel formed at the heterojunction interface. The formation of the 2DEG channel was further confirmed by a weak temperature-dependence of the carrier density, and the peak low temperature mobility was found to be 2790 cm2/Vs, which is significantly higher than can be achieved in bulk-doped \b{eta}-Ga2O3. The demonstrated modulation-doped \b{eta}-(AlxGa1-x)2O3/Ga2O3 structure lays the foundation for future exploration of quantum physical phenomena as well as new semiconductor device technologies based on the \b{eta}-Ga2O3 material system.

cond-mat.mtrl-sci↗

Modulation-doped beta-(Al0.2Ga0.8)2O3/Ga2O3 Field-Effect Transistor

Modulation-doped heterostructures are a key enabler for realizing high mobility and better scaling properties for high performance transistors. We report the realization of modulation-doped two-dimensional electron gas (2DEG) at beta(Al0.2Ga0.8)2O3/ Ga2O3 heterojunction using silicon delta doping. The formation of a 2DEG was confirmed using capacitance voltage measurements. A modulation-doped 2DEG channel was used to realize a modulation-doped field-effect transistor. The demonstration of modulation doping in the beta-(Al0.2Ga0.8)2O3/ Ga2O3 material system could enable heterojunction devices for high performance electronics.

cond-mat.mes-hall↗

Reflective Metal/Semiconductor Tunnel Junctions for Hole Injection in AlGaN UV LEDs

In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into p-AlGaN. The dependence of tunneling on the work function of the metal was investigated, and it was found that highly reflective Al metal layers can enable efficient hole injection into p-AlGaN, despite the relatively low work function of Al. Efficient tunneling hole injection was confirmed by light emission at 326 nm with on-wafer peak external quantum efficiency and wall-plug efficiency of 2.65% and 1.55%, respectively. A high power density of 83.7 W/cm2 was measured at 1200 kA/cm2. The metal/semiconductor tunnel junction structure demonstrated here could provide significant advantages for efficient and manufacturable device topologies for high power UV emitters.

physics.app-ph↗

Molecular Beam Epitaxy of 2D-layered Gallium Selenide on GaN substrates

Large area epitaxy of two-dimensional (2D) layered materials with high material quality is a crucial step in realizing novel device applications based on 2D materials. In this work, we report high-quality, crystalline, large-area gallium selenide (GaSe) films grown on bulk substrates such as c-plane sapphire and gallium nitride (GaN) using a valved cracker source for Se. (002)-oriented GaSe with random in-plane orientation of domains was grown on sapphire and GaN substrates at a substrate temperature of 350-450 C with complete surface coverage and smooth surface morphology. Higher growth temperature (575 C) resulted in the formation of single-crystalline ε-GaSe triangular domains with six-fold symmetry confirmed by in-situ reflection high electron energy diffraction (RHEED) and off-axis x-ray diffraction (XRD). A two-step growth method involving high temperature nucleation of single crystalline domains and low temperature growth to enhance coalescence was adopted to obtain continuous (002)-oriented GaSe with an epitaxial relationship with the substrate. While six-fold symmetry was maintained in the two step growth, β-GaSe phase was observed in addition to the dominant ε-GaSe in cross-sectional scanning transmission electron microscopy images. This work demonstrates the potential of growing high quality 2D-layered materials using molecular beam epitaxy and can be extended to the growth of other transition metal chalcogenides.

cond-mat.mtrl-sci↗

FEMSIM+HRMC: Simulation of and Structural Refinement using Fluctuation Electron Microscopy for Amorphous Materials

FEMSIM, a Fortran code, has been developed to simulate the fluctuation electron microscopy signal, the variance, V(k), from a model atomic structure. FEMSIM has been incorporated into a hybrid-reverse Monte Carlo code that combines an embedded atom or Finnis-Sinclair potential with the deviation between simulated and experimental V(k) data to refine an atomic model with structure constrained by both the potential and experimental data. The resulting models have experimentally-derived medium-range order.

cond-mat.mtrl-sci↗