arXiv subjects

Jixiang Jing

Publications and source records attributed to Jixiang Jing.

5 recordsLinked to original sources

arXiv2026

Swelling-Induced Stress-Assisted Transfer of Nanodiamond Arrays with a PVA Carrier Tape for Conformal Bio-Integrated Sensing and Labelling

The conformal integration of nitrogen-vacancy (NV) center nanodiamond arrays onto soft, hydrated, curvilinear biological interfaces remain a fundamental challenge for in vivo quantum sensing and imaging. Conventional transfer techniques often fail due to reliance on high temperature, corrosive chemicals, or mechanical peeling, leading to pattern damage, low fidelity, or poor biocompatibility. Here, we report a transfer strategy utilizing polyvinyl alcohol (PVA) carrier soluble tape, enabling rapid, residue-free, high-fidelity transfer of nanodiamond patterns onto diverse biointerfaces. The success of this method is rooted in a unique "hydrate-soften-expand-self-peel" mechanism of the soluble tape with PVA backing. In situ mechanical tracking reveals non-uniform PVA swelling upon hydration generates transient local normal and shear stresses at the interface. These stresses delaminate the tape within 3 minutes at room temperature while promoting adhesion of the nanodiamond array to the substrate. In contrast, conventional water-soluble tapes with composite structures undergo passive dissolution and collapse, causing residue contamination and reduced efficiency. Leveraging this mechanism, we achieve conformal patterning on ultra-soft hydrogels (~0.6 kPa) and highly curved bio-surfaces (hair, 100 {\mu}m^-1). Additionally, we demonstrate a dual-identity verification system integrating data storage and physical unclonable functions on a hydrogel contact lens. This work provides a versatile tool for bio-interface engineering and a general framework for gentle, efficient transfer of functional nanomaterials.

physics.bio-ph↗

arXiv2025

Wafer-scale integration of single nanodiamonds via electrostatic-trapping

Nanodiamonds (NDs) are key materials for building nanoscale quantum sensing, imaging and communication devices. Scalable configuration of single NDs on heterogeneous platforms, forming photonic quantum source arrays, will be an essential solution towards realizing next-generation practical and industrial quantum devices. However, NDs are challenging to manipulate because their size, shape and surface chemistry vary substantially. Here, we show a simple method based on electrostatic-trapping to rapidly and reliably pattern single ND arrays on arbitrary substrates at scale. Our method, which uses carefully engineered microscale hole templates and electrostatic force, captures single NDs across 8-inch wafers with 82.5% yields within 5 min. Systematic experimental and theoretical studies show the number of deposited NDs primarily depends on the diameter of the hole trap. The method is compatible with mature CMOS technologies, enabling the mass production of scalable and integrable quantum devices. This advancement is expected to accelerate the commercialization and industrial adoption of ND-based technologies.

physics.optics↗

arXiv2025

Self-Powered, Ultra-thin, Flexible, and Scalable Ultraviolet Detector Utilizing Diamond-MoS$_2$ Heterojunction

The escalating demand for ultraviolet (UV) sensing in space exploration, environmental monitoring, and agricultural productivity necessitates detectors that are both environmentally and mechanically resilient. Diamond, featuring its high bandgap and UV absorption, exceptional mechanical/chemical robustness, and excellent thermal stability, emerges as a highly promising material for next-generation UV detection in various scenarios. However, conventional diamond-based UV detectors are constrained by rigid bulk architectures and reliance on external power supplies, hindering their integration with curved and flexible platforms and complicating device scalability due to auxiliary power requirements. To tackle these challenges, herein, we firstly demonstrated a large-scale, self-powered, and flexible diamond UV detector by heterogeneously integrating a MoS$_2$ monolayer with an ultrathin, freestanding diamond membrane. The fabricated device operates at zero external bias, and simultaneously exhibits a high responsivity of 94 mA W$^{-1}$ at 220 nm, and detectivity of 5.88 x 109 Jones. Notably, mechanical bending enables strain-induced bandgap modulation of the diamond membrane, allowing dynamically tunable photoresponse-a capability absent in rigid diamond counterparts. To validate its practicality and scalability, a proof-of-concept UV imager with 3x3 pixels was demonstrated. This newly developed configuration will undoubtedly open up new routes toward scalable, integrable, flexible, and cost-effective UV sensing solutions for emerging technologies

physics.ins-det↗

arXiv2024

A versatile method for nano-fabrication on diamond film: flexible diamond metasurfaces as a demonstration

Diamond exhibits superb performance across a wide range of applications due to its enormous outstanding properties in electronic, photonic and quantum fields. Yet heterogeneous integration of diamond for on-chip functionalities, like 2D materials, remains challenging due to the hard acquisition of scalable, transferable and ultrathin diamond samples. Recently, the edge-exposed exfoliation has been demonstrated as an effective way to produce wafer-scale, freestanding and ultrathin diamond films. However, the incompatibility of the newly developed diamond film with conventional nano-fabrication methods makes it difficult to fabricate diamond film into practical devices. Herein, we demonstrate the mask-transferring by sugar as a versatile method for pattern-definition on diamond films, which shows excellent geometrical resolution and accuracy comparing to conventional approaches. Additionally, based on this method, the flexible all-diamond metasurfaces functioning as structural colors have been achieved, which indicates its huge potential for fabricating more diamond-related devices.

physics.optics↗

arXiv2024

A diamond heater-thermometer microsensor for measuring localized thermal conductivity: a case study in gelatin hydrogel

Understanding the microscopic thermal effects of the hydrogel is important for its application in diverse fields, including thermal-related studies in tissue engineering and thermal management for flexible electronic devices. In recent decades, localized thermal properties, such as thermal conductivity, have often been overlooked due to technical limitations. To tackle this, we propose a new hybrid diamond microsensor that is capable of simultaneous temperature control and readout in a decoupled manner. Specifically, the sensor consists of a silicon pillar (heater) at about 10 microns in length, topped by a micron-sized diamond particle that contains silicon-vacancy (SiV) centers (thermometer) with 1.29 K*Hz^(-1/2) temperature measurement sensitivity. Combining this innovative, scalable sensor with a newly established simulation model that can transform heating-laser-induced temperature change into thermal conductivity, we introduced an all-optical decoupled method with about 0.05 W/(m* K) precision, which can reduce laser crosstalk. For the first time, we track the thermal conductivity change of hydrogels during the gelation process and demonstrate the existence of variation. We introduce a rapid, undisturbed technique for measuring microscale thermal conductivity, potentially serving as a valuable tool for cellular thermometry and highlight the idea that decoupling can reduce crosstalk from different lasers, which is helpful for quantum sensing.

physics.optics↗