arXiv subjects

John T. Gaskins

Publications and source records attributed to John T. Gaskins.

11 recordsLinked to original sources

arXiv2026

Lock-In Infrared Thermography: Phase Analysis for Rapid, Wide-Range Thermal Conductivity Measurements

We report on a phase-based lock-in thermography approach, combined with a multilayered thermal model (often employed in thermoreflectance analysis), to measure the thermal conductivity of bulk materials and layered structures. The spatial distribution of the material's thermal phase is monitored with an infrared camera, which is locked into the frequency of a modulated laser used to heat the material. This phase distribution is then fit with a thermal model, in which properties such as thermal conductivity are extracted as fit parameters. This approach enables non-contact, front-side measurements, which are insensitive to surface roughness. The technique does not strictly require the application of a transducer layer, but we highlight the practical benefits of applying a removable adhesive layer to serve as a near-surface absorber. We demonstrate the efficacy of the method by measuring materials with thermal conductivities that span over three orders of magnitude (approximately 1 W/m/K to > 2000 W/m/K).

cond-mat.mtrl-sci↗

arXiv2025

Unveiling Phonon Contributions to Thermal Transport and the Failure of the Wiedemann-Franz Law in Ruthenium and Tungsten Thin Films

Thermal transport in nanoscale interconnects is dominated by intricate electron-phonon interactions and microstructural influences. As copper faces limitations at the nanoscale, tungsten and ruthenium have emerged as promising alternatives due to their substantial phonon contributions to thermal conductivity. Metals with stronger phonon-mediated thermal transport are particularly advantageous in nanoscale architectures, where phonons are less sensitive to size effects than electrons. Here, we show that phonons play a comparable role to electrons in the thermal transport of ruthenium and tungsten thin films, evidenced by deviations from the classical Wiedemann-Franz law. Elevated Lorenz numbers-1.9 and 2.7 times the Sommerfeld value for ruthenium and tungsten, respectively-indicate phonon contributions of 45% and 62% to total thermal conductivity. Comparisons of in-plane thermal conductivity from steady-state thermoreflectance and electron relaxation times from infrared ellipsometry reveal that phonon-mediated transport is insensitive to microstructural variations and scaling. Ultrafast infrared pump-probe measurements show that ruthenium exhibits a higher electron-phonon coupling factor than tungsten, consistent with the differing contributions of carriers to thermal transport. Molecular dynamics simulations and spectral energy density analysis confirm substantial phonon-driven thermal transport and mode-dependent phonon lifetimes. These results offer insights into phonon-driven thermal transport and provide design principles for selecting interconnects with enhanced thermal management.

cond-mat.mtrl-sci↗

arXiv2024

Ruddlesden-Popper chalcogenides push the limit of mechanical stiffness and glass-like thermal conductivity in single crystals

Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded single crystals in which heat transport is impeded by other means. Here, we report intrinsic, glass-like, ultralow thermal conductivity and ultrahigh elastic-modulus/thermal-conductivity ratio in single-crystalline Ruddlesden-Popper Ban+1ZrnS3n+1, n = 2,3, which are derivatives of BaZrS3. Their key features are strong anharmonicity and intra-unit-cell rock-salt blocks. The latter produce strongly bonded intrinsic superlattices, impeding heat conduction by broadband reduction of phonon velocities and mean free paths and concomitant strong phonon localization. The present study initiates a paradigm of mechanically stiff phonon glasses.

cond-mat.mtrl-sci↗

arXiv2024

Disorder controlled sound speed and thermal conductivity of hybrid metalcone films

The multifaceted applications of polymers are often limited by their thermal conductivity. Therefore, understanding the mechanisms of thermal transport in polymers is of vital interest. Here, we leverage molecular layer deposition to grow three types of hybrid metalcone (i.e., alucone, zincone, and tincone) films and study their thermal and acoustic properties. The thermal conductivity of the hybrid polymer films ranges from 0.43 to 1.14 W/mK. Using kinetic theory, we trace the origin of thermal conductivity difference to sound speed change, which is dictated by the structural disorder within the films. Changing the disorder has negligible impacts on volumetric heat capacity and vibrational lifetimes. Our findings provide means to improve the thermal conductivity of organic, hybrid, and inorganic polymer films.

physics.app-ph↗

arXiv2023

Validation of the Wiedemann-Franz Law in solid and molten tungsten above 2000 K through thermal conductivity measurements via steady state temperature differential radiometry

We measure the thermal conductivity of solid and molten tungsten using Steady State Temperature Differential Radiometry. We demonstrate that the thermal conductivity can be well described by application of Wiedemann-Franz Law to electrical resistivity data, thus suggesting the validity of Wiedemann-Franz Law to capture the electronic thermal conductivity of metals in their molten phase. We further support this conclusion using ab initio molecular dynamics simulations with a machine-learned potential. Our results show that at these high temperatures, the vibrational contribution to thermal conductivity is negligible compared to the electronic component.

cond-mat.mtrl-sci↗

arXiv2022

On the thermal and mechanical properties of Mg$_{0.2}$Co$_{0.2}$Ni$_{0.2}$Cu$_{0.2}$Zn$_{0.2}$O across the high-entropy to entropy-stabilized transition

As various property studies continue to emerge on high entropy and entropy-stabilized ceramics, we seek further understanding of property changes across the phase boundary between \enquote{high-entropy} and \enquote{entropy-stabilized}. The thermal and mechanical properties of bulk ceramic entropy stabilized oxide composition Mg$_{0.2}$Co$_{0.2}$Ni$_{0.2}$Cu$_{0.2}$Zn$_{0.2}$O are investigated across this critical transition temperature via the transient plane-source method, temperature-dependent X-ray diffraction, and nano-indentation. Thermal conductivity remains constant within uncertainty across the multi-to-single phase transition at a value of ~2.5 W/mK, while the linear coefficient of thermal expansion increases nearly 24 % from 10.8 to 14.1 x 10$^{-6}$ K$^{-1}$. Mechanical softening is also observed across the transition.

cond-mat.mtrl-sci↗

arXiv2021

Thermal conductivity measurements of sub-surface buried substrates by steady-state thermoreflectance

Measuring the thermal conductivity of sub-surface buried substrates are of significant practical interests. However, this remains challenging with traditional pump-probe spectroscopies due to their limited thermal penetration depths (TPD). Here, we experimentally and numerically investigate the TPD of recently developed optical pump-probe technique steady-state thermoreflectance (SSTR) and explore its capability for measuring the thermal properties of buried substrates. The conventional definition of the TPD does not truly represent the upper limit of how far beneath the surface SSTR can probe. For estimating the uncertainty of SSTR measurements of a buried substrate a priori, sensitivity calculations provide the best means. Thus, detailed sensitivity calculations are provided to guide future measurements. Due to the steady-state nature of SSTR, it can measure the thermal conductivity of buried substrates typically inaccessible by traditional pump-probe techniques, exemplified by measuring three control samples. We also discuss the required criteria for SSTR to isolate the thermal properties of a buried film. Our study establishes SSTR as a suitable technique for thermal characterizations of sub-surface buried substrates in typical device geometries.

physics.ins-det↗

arXiv2020

Interface controlled thermal properties of ultra-thin chalcogenide-based phase change memory devices

Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close to the memory cell dimension and, thus, the impact of interfaces on PCM operation is unknown. Our work presents a new paradigm to manage thermal transport in memory cells by manipulating the interfacial thermal resistance between the phase change unit and the electrodes without incorporating additional insulating layers. Experimental measurements show a substantial change in thermal boundary resistance as GST transitions from one crystallographic structure (cubic) to another (hexagonal) and as the thickness of tungsten contacts is reduced from five to two nanometers. Simulations reveal that interfacial resistance between the phase change unit and its adjacent layer can reduce the reset current for 20 and 120 nm diameter devices by up to ~40% and ~50%, respectively. The resultant phase-dependent and geometric effects on thermal boundary resistance dictate that the effective thermal conductivity of the phase change unit can be reduced by a factor of four, presenting a new opportunity to reduce operating currents in PCMs.

physics.app-ph↗

arXiv2017

Thermal boundary conductance across epitaxial ZnO/GaN interfaces: Assessment of phonon gas models and atomistic Green's function approaches for predicting interfacial phonon transport

We present experimental measurements of the thermal boundary conductance (TBC) from $77 - 500$ K across isolated heteroepitaxially grown ZnO films on GaN substrates. These data provide an assessment of the assumptions that drive the phonon gas model-based diffuse mismatch models (DMM) and atomistic Green's function (AGF) formalisms for predicting TBC. Our measurements, when compared to previous experimental data, suggest that the TBC can be influenced by long wavelength, zone center modes in a material on one side of the interface as opposed to the "vibrational mismatch" concept assumed in the DMM; this disagreement is pronounced at high temperatures. At room temperature, we measure the ZnO/GaN TBC as $490\lbrack +150, -110\rbrack$ MW m$^{-2}$ K$^{-1}$. The disagreement among the DMM and AGF and the experimental data these elevated temperatures suggests a non-negligible contribution from additional modes contributing to TBC that not accounted for in the fundamental assumptions of these harmonic formalisms, such as inelastic scattering. Given the high quality of these ZnO/GaN interface, these results provide an invaluable critical and quantitive assessment of the accuracy of assumptions in the current state of the art of computational approaches for predicting the phonon TBC across interfaces.

cond-mat.mtrl-sci↗

arXiv2017

Small-mass atomic defects enhance vibrational thermal transport at disordered interfaces with ultrahigh thermal boundary conductance

The role of interfacial nonidealities and disorder on thermal transport across interfaces is traditionally assumed to add resistance to heat transfer, decreasing the thermal boundary conductance (TBC).$^1$ However, recent computational works have suggested that interfacial defects can enhance this thermal boundary conductance through emergence of unique vibrations that are intrinsic to the material interface and defect atoms,$^{2-6}$ a finding that contradicts traditional theory and conventional understanding. By manipulating the local heat flux of atomic vibrations that comprise these interfacial modes, in principle, the TBC can be increased. In this work, we provide evidence that interfacial defects can enhance the TBC across interfaces through the emergence of unique high frequency vibrational modes that arise from atomic mass defects at the interface with relatively small masses. We demonstrate ultrahigh TBC at amorphous SiOC:H/SiC:H interfaces, approaching 1 GW m$^{-2}$ K$^{-1}$, that is further increased through the introduction of nitrogen defects. The fact that disordered interfaces can exhibit such high conductances, which can be further increased with additional defects offers a unique direction in controlling interfacial thermal transport that becomes important in manipulating heat transfer across materials with high densities of interfaces.

cond-mat.mtrl-sci↗

arXiv2015

Steady-State Thermal Analysis of an Integrated 160 GHz Balanced Quadrupler Based on Quasi-Vertical Schottky Diodes

This work reports on a steady-state thermal analysis of a 160 GHz balanced quadrupler, based on a quasi-vertical varactor Schottky diode process, for high power applications. The chip is analyzed by solving the heat equation via the 3D finite element method. Time-Domain Thermoreflectance (TDTR) was used to measure the thermal conductivity of the different materials used in the model. A maximum anode temperature of 64.9 C was found from the simulation. The addition of an extra beam lead connected to the block, for heat sinking, was found to reduce this maximum temperature to 41.0 C.

cond-mat.mtrl-sci↗