arXiv subjects

Jon Pratt

Publications and source records attributed to Jon Pratt.

8 recordsLinked to original sources

arXiv2026

High Breakdown Field Multi-kV UWBG AlGaN Transistors

We demonstrate high-performance UWBG AlGaN PolFETs exhibiting a state-of-the-art combination of nearly 1 A/mm on-state current (~ 960 mA/mm) and large breakdown field (> 4.8 MV/cm) in high carrier density (1.15 x 1013 cm-2). Multi-kV robustness is successfully demonstrated exhibiting 1.28 and 2.17 kV by utilizing a gate-connected field plate structures in 3.9 and 6.8 {\mu}m LGD, corresponding to the extremely low specific on-resistance of 1.25 and 2.86 m{\Omega}cm2, respectively. High RF performance is also achieved, providing fT and fMAX, of 8.5 and 15 GHz, respectively, for 3.9 {\mu}m LGD. These results highlight UWBG AlGaN as a platform for both high-voltage RF and power applications.

physics.app-ph↗

arXiv2025

Ultra-Wide Bandgap AlGaN Heterostructure Field Effect Transistors with Current Gain Cutoff Frequency Above 85 GHz

We report the design and demonstration of ultra-wide-bandgap (UWBG) AlGaN polarization-graded field-effect transistors (PolFETs) that achieve a current-gain cutoff frequency above 85 GHz and a current density exceeding 1.3 A/mm. Ultra-thin channel and buffer layers were grown epitaxially on AlN substrates, and a reverse-graded AlGaN contact layer was incorporated to reduce the contact resistance to below 1 ohm.mm. With aggressively scaled device dimensions, the AlGaN PolFETs exhibit state-of-the-art high-frequency performance for UWBG transistors. Small-signal modeling reveals both parasitic and transit delays, confirming the benefits of reduced access resistance and enhanced intrinsic transconductance. These results establish a new performance benchmark for UWBG AlGaN devices and demonstrate their strong potential for next-generation millimeter-wave electronics.

physics.app-ph↗

arXiv2025

Lithographically Defined Si$_3$N$_4$ Torsional Pendulum

Torsion pendulums provide an opportunity to trap large masses in a potential weak enough to explore two-body gravitation. Cooled to, and then released from a ground state, weak quantum effects, including those from gravity, might reveal themselves in the evolving decoherence of a torsion pendulum, if its baseline dissipation were sufficiently dilute for quantum coherent oscillation. Monolithic ribbon-like, or multi-filar suspension geometries provide a key to such dilution in torsion, but are challenging to make. As a solution, we introduce a lithographically defined silicon nitride (Si$_3$N$_4$) ribbon suspension in a wafer-scale approach to pendulum fabrication that is conducive to such 2-D geometries, making extreme aspect ratios, and even multi-filar designs, a possibility. A monofilar, monolithic, centimeter scale torsion pendulum is fabricated and released in a first proof of concept. Mounted in vacuum, it is optically excited and cooled using measurement based feedback. Though only 37 mg, the device displays a fundamental frequency of 162 mHz and an undiluted Q of 12000, demonstrating a foundational step towards ultra-coherent, ultra-low frequency torsion pendulums.

physics.app-ph↗

arXiv2025

Barrier Electrostatics and Contact Engineering for Ultra-Wide Bandgap AlGaN HFETs

We report ultra-wide bandgap (UWBG) AlGaN heterostructure field-effect transistors (HFETs) exhibiting a high breakdown field (> 5.3 MV/cm) and a low contact resistance (~1.55 {\Omega}mm), tailored for high-power radiofrequency applications. A split-doped barrier architecture, employing two distinct doping concentrations, is shown to enhance both the breakdown field and contact resistance. This design enables a state-of-the-art combination of maximum drain current (487 mA/mm) and breakdown field, along with a high cutoff frequency of 7.2 GHz. These results demonstrate a viable pathway to push device performance toward the material limits while minimizing contact resistance in UWBG AlGaN HFETs, paving the way for next-generation high-power, high-frequency applications.

cond-mat.mtrl-sci↗

arXiv2025

High Breakdown Electric Field (> 5 MV/cm) in UWBG AlGaN Transistors

We report on the design and demonstration of ultra-wide bandgap (UWBG) AlGaN-channel metal-insulator heterostructure field effect transistors (HEFTs) for high-power, high-frequency applications. We find that the integration of gate dielectrics and field plates greatly improves the breakdown field in these devices, with state-of-art average breakdown field of 5.3 MV/cm (breakdown voltage > 260 V) with an associated maximum current density of 342 mA/mm, and cut-off frequency of 9.1 GHz. Furthermore, low trap-related impact was observed from minimal gate and drain lag estimated from pulsed I-V characteristics. The reported results provide the potential of UWBG AlGaN HEFTs for the next generation high-power radio frequency applications.

cond-mat.mtrl-sci↗

arXiv2019

The Performance of the KIBB-g1 Tabletop Kibble Balance at NIST

A tabletop-sized Kibble balance (KIBB-g1) designed to directly realize mass at the gram-level range with uncertainties on the order of parts in 10$^6$ has been developed at the National Institute of Standards and Technology (NIST). The masses of a nominally 5\,g and 1\,g weight were determined with 1-$\sigma$ standard uncertainties of 9.0\,$\upmu$g and 6.7\,$\upmu$g, respectively. The corresponding relative uncertainties are $1.8\times 10^{-6}$ and $6.3\times 10^{-6}$. The construction of the instrument, capabilities, and full uncertainty budgets are presented in this manuscript.

physics.ins-det↗

arXiv2014

High sensitivity optomechanical reference accelerometer over 10 kHz

We present an optically-detected mechanical accelerometer that achieves a sensitivity of 100 ng/rtHz over a bandwidth of 10kHz and is traceable. We have incorporated a Fabry-Perot fiber-optic micro-cavity that is currently capable of measuring the test-mass displacement with sensitivities of 200 am/rtHz, and whose length determination enables traceability to the International System of Units (SI). The compact size and high mQ-product achieved combined with the high sensitivity and simplicity of the implemented optical detection scheme highlight our device and this category of accelerometers, outlining a path for high sensitivity reference acceleration measurements and observations in seismology and gravimetry.

physics.optics↗

arXiv2014

A nonlinearity in permanent-magnet systems used in watt balances

Watt balances are used to measure the Planck constant and will be used in the future to realize mass at the kilogram level. They increasingly rely on permanent magnet systems to generate the magnetic flux. It has been known that the weighing current might effect the magnetization state of the permanent magnetic system used in these systems causing a systematic bias that can lead to an error in the result if not accounted for. In this article a simple model explaining the effect of the weighing current on the yoke of the magnet is developed. This model leads to a nonlinear dependence of the magnetic flux density in the gap that is proportional to the squared value of the coil current. The effect arises from changing the reluctance of the yoke by the additional field produced by the coil. Our analysis shows that the effect depends on the width of the air gap, the magnetic flux density in the air gap, and the $BH$ curve of the yoke material. Suggestions to reduce the nonlinear effect are discussed.

physics.class-ph↗