arXiv subjects

Jonathan Baugh

Publications and source records attributed to Jonathan Baugh.

At least 37 records · Page 2Linked to original sources

arXiv2020

Roadmap for gallium arsenide spin qubits

Gate-defined quantum dots in gallium arsenide (GaAs) have been used extensively for pioneering spin qubit devices due to the relative simplicity of fabrication and favourable electronic properties such as a single conduction band valley, a small effective mass, and stable dopants. GaAs spin qubits are readily produced in many labs and are currently studied for various applications, including entanglement, quantum non-demolition measurements, automatic tuning, multi-dot arrays, coherent exchange coupling, and teleportation. Even while much attention is shifting to other materials, GaAs devices will likely remain a workhorse for proof-of-concept quantum information processing and solid-state experiments.

cond-mat.mes-hall↗

arXiv2020

Self-driven oscillation in Coulomb blockaded suspended carbon nanotubes

Suspended carbon nanotubes are known to support self-driven oscillations due to electromechanical feedback under certain conditions, including low temperatures and high mechanical quality factors. Prior reports identified signatures of such oscillations in Kondo or high-bias transport regimes. Here, we observe self-driven oscillations that give rise to significant conduction in normally Coulomb-blockaded low-bias transport. Using a master equation model, the self-driving is shown to result from strongly energy-dependent electron tunneling, and the dependencies of transport features on bias, gate voltage, and temperature are well reproduced.

cond-mat.mes-hall↗

arXiv2019

Supercurrent Interference in Semiconductor Nanowire Josephson Junctions

Semiconductor-superconductor hybrid systems provide a promising platform for hosting unpaired Majorana fermions towards the realisation of fault-tolerant topological quantum computing. In this study, we employ the Keldysh Non-Equilibrium Green's function formalism to model quantum transport in normal-superconductor junctions. We analyze III-V semiconductor nanowire Josephson junctions (InAs/Nb) using a three-dimensional discrete lattice model described by the Bogolubov-de Gennes Hamiltonian in the tight-binding approximation, and compute the Andreev bound state spectrum and current-phase relations. Recent experiments [Zuo et al., Phys. Rev. Lett. 119,187704 (2017)] and [Gharavi et al., arXiv:1405.7455v2 (2014)] reveal critical current oscillations in these devices, and our simulations confirm these to be an interference effect of the transverse sub-bands in the nanowire. We add disorder to model coherent scattering and study its effect on the critical current oscillations, with an aim to gain a thorough understanding of the experiments. The oscillations in the disordered junction are highly sensitive to the particular realisation of the random disorder potential, and to the gate voltage. A macroscopic current measurement thus gives us information about the microscopic profile of the junction. Finally, we study dephasing in the channel by including elastic phase-breaking interactions. The oscillations thus obtained are in good qualitative agreement with the experimental data, and this signifies the essential role of phase-breaking processes in III-V semiconductor nanowire Josephson junctions.

cond-mat.mes-hall↗

arXiv2019

Understanding resonant charge transport through weakly coupled single-molecule junctions

Off-resonant charge transport through molecular junctions has been extensively studied since the advent of single-molecule electronics and it is now well understood within the framework of the non-interacting Landauer approach. Conversely, gaining a qualitative and quantitative understanding of the resonant transport regime has proven more elusive. Here, we study resonant charge transport through graphene-based zinc-porphyrin junctions. We experimentally demonstrate an inadequacy of the non-interacting Landauer theory as well as the conventional single-mode Franck-Condon model. Instead, we model the overall charge transport as a sequence of non-adiabatic electron transfers, the rates of which depend on both outer and inner-sphere vibrational interactions. We show that the transport properties of our molecular junctions are determined by a combination of electron-electron and electron-vibrational coupling, and are sensitive to the interactions with the wider local environment. Furthermore, we assess the importance of nuclear tunnelling and examine the suitability of semi-classical Marcus theory as a description of charge transport in molecular devices.

cond-mat.mes-hall↗

arXiv2019

Few-electrode design for silicon MOS quantum dots

Silicon metal-oxide-semiconductor (MOS) spin qubits have become a promising platform for quantum information processing, with recent demonstrations of high-fidelity single and two-qubit gates. To move beyond a few qubits, however, more scalable designs that reduce the fabrication complexity and electrode density are needed. Here, we introduce a two-metal-layer MOS quantum dot device in which tunnel barriers are naturally formed by gaps between electrodes and controlled by adjacent accumulation gates. The accumulation gates define the electron reservoirs and provide tunability of the tunnel rate of nearly 8.5 decades/V, determined by a combination of charge sensor electron counting measurements and by direct transport. The valley splitting in the few-electron regime is probed by magneto-spectroscopy up to a field of 6 T, providing an estimate for the ground-state gap of 290 $μ$eV. We show preliminary characterization of a double quantum dot, demonstrating that this design can be extended to linear dot arrays that should be useful in applications like electron shuttling. These results motivate further innovations in MOS quantum dot design that can improve the scalability prospects for spin qubits.

cond-mat.mes-hall↗

arXiv2018

Network architecture for a topological quantum computer in silicon

A design for a large-scale surface code quantum processor based on a node/network approach is introduced for semiconductor quantum dot spin qubits. The minimal node contains only 7 quantum dots, and nodes are separated on the micron scale, creating useful space for wiring interconnects and integration of conventional transistor circuits. Entanglement is distributed between neighbouring nodes by loading spin singlets locally and then shuttling one member of the pair through a linear array of empty dots. Each node contains one data qubit, two ancilla qubits, and additional dots to facilitate electron shuttling and measurement of the ancillas. A four-node GHZ state is realized by sharing three internode singlets followed by local gate operations and ancilla measurements. Further local operations and measurements produce an X or Z stabilizer on four data qubits, which is the fundamental operation of the surface code. Electron shuttling is simulated using a simplified gate electrode geometry without explicit barrier gates, and demonstrates that adiabatic transport is possible on timescales that do not present a speed bottleneck to the processor. An important shuttling error in a clean system is uncontrolled phase rotation due to the modulation of the electronic g-factor during transport, owing to the Stark effect. This error can be reduced by appropriate electrostatic tuning of the stationary electron's g-factor. Using reasonable noise models, we estimate error thresholds with respect to single and two-qubit gate fidelities as well as singlet dephasing errors during shuttling. A twirling protocol transforms the non-Pauli noise associated with exchange gate operations into Pauli noise, making it possible to use the Gottesman-Knill theorem to efficiently simulate large codes.

quant-ph↗

arXiv2018

Gradient-based closed-loop quantum optimal control in a solid-state two-qubit system

Quantum optimal control can play a crucial role to realize a set of universal quantum logic gates with error rates below the threshold required for fault-tolerance. Open-loop quantum optimal control relies on accurate modeling of the quantum system under control, and does not scale efficiently with system size. These problems can be avoided in closed-loop quantum optimal control, which utilizes feedback from the system to improve control fidelity. In this paper, two gradient-based closed-loop quantum optimal control algorithms, the hybrid quantum-classical approach (HQCA) described in [Phys. Rev. Lett. 118, 150503 (2017)] and the finite-difference (FD) method, are experimentally investigated and compared to the open-loop quantum optimal control utilizing the gradient ascent method. We employ a solid-state ensemble of coupled electron-nuclear spins serving as a two-qubit system. Specific single-qubit and two-qubit state preparation gates are optimized using the closed-loop and open-loop methods. The experimental results demonstrate the implemented closed-loop quantum control outperforms the open-loop control in our system. Furthermore, simulations reveal that HQCA is more robust than the FD method to gradient noise which originates from measurement noise in this experimental setting. On the other hand, the FD method is more robust to control field distortions coming from non-ideal hardware

quant-ph↗

arXiv2018

Non-equilibrium Green's function study of magneto-conductance features and oscillations in clean and disordered nanowires

We explore various aspects of magneto-conductance oscillations in semiconductor nanowires, developing quantum transport models based on the non-equilibrium Green's function formalism. In the clean case, Aharonov-Bohm (AB - h/e) oscillations are found to be dominant, contingent upon the surface confinement of electrons in the nanowire. We also numerically study disordered nanowires of finite length, bridging a gap in the existing literature. By varying the nanowire length and disorder strength, we identify the transition where Al'tshuler-Aronov-Spivak (AAS - h/2e) oscillations start dominating, noting the effects of considering an open system. Moreover, we demonstrate how the relative magnitudes of the scattering length and the device dimensions govern the relative dominance of these harmonics with energy, revealing that the AAS oscillations emerge and start dominating from the center of the band, much higher in energy than the conduction band-edge. We also show the ways of suppressing the oscillatory components (AB and AAS) to observe the non-oscillatory weak localization corrections, noting the interplay of scattering, incoherence/dephasing, the geometry of electronic distribution, and orientation of magnetic field. This is followed by a study of surface roughness which shows contrasting effects depending on its strength and type, ranging from magnetic depopulation to strong AAS oscillations. Subsequently, we show that dephasing causes a progressive degradation of the higher harmonics, explaining the re-emergence of the AB component even in long and disordered nanowires. Lastly, we show that our model qualitatively reproduces the experimental magneto-conductance spectrum in [Holloway et al, PRB 91, 045422 (2015)] reasonably well while demonstrating the necessity of spatial-correlations in the disorder potential, and dephasing.

cond-mat.mes-hall↗

arXiv2018

Efficient continuous wave noise spectroscopy beyond weak coupling

The optimization of quantum control for physical qubits relies on accurate noise characterization. Probing the spectral density $S(ω)$ of semi-classical phase noise using a spin interacting with a continuous-wave (CW) resonant excitation field has recently gained attention. CW noise spectroscopy protocols have been based on the generalized Bloch equations (GBE) or the filter function formalism, assuming weak coupling to a Markovian bath. However, this standard protocol can substantially underestimate $S(ω)$ at low frequencies when the CW pulse amplitude becomes comparable to $S(ω)$. Here, we derive the coherence decay function more generally by extending it to higher orders in the noise strength and discarding the Markov approximation. Numerical simulations show that this provides a more accurate description of the spin dynamics compared to a simple exponential decay, especially on short timescales. Exploiting these results, we devise a protocol that uses an experiment at a single CW pulse amplitude to extend the spectral range over which $S(ω)$ can be reliably determined to $ω=0$.

quant-ph↗

arXiv2017

Enhancing quantum control by bootstrapping a quantum processor of 12 qubits

Accurate and efficient control of quantum systems is one of the central challenges for quantum information processing. Current state-of-the-art experiments rarely go beyond 10 qubits and in most cases demonstrate only limited control. Here we demonstrate control of a 12-qubit system, and show that the system can be employed as a quantum processor to optimize its own control sequence by using measurement-based feedback control (MQFC). The final product is a control sequence for a complex 12-qubit task: preparation of a 12-coherent state. The control sequence is about 10% more accurate than the one generated by the standard (classical) technique, showing that MQFC can correct for unknown imperfections. Apart from demonstrating a high level of control over a relatively large system, our results show that even at the 12-qubit level, a quantum processor can be a useful lab instrument. As an extension of our work, we propose a method for combining the MQFC technique with a twirling protocol, to optimize the control sequence that produces a desired Clifford gate.

quant-ph↗

arXiv2017

A double quantum dot memristor

Memristive systems are generalisations of memristors, which are resistors with memory. In this paper, we present a quantum description of memristive systems. Using this model we propose and experimentally demonstrate a simple and practical scheme for realising memristive systems with quantum dots. The approach harnesses a phenomenon that is commonly seen as a bane of nanoelectronics, i.e. switching of a trapped charge in the vicinity of the device. We show that quantum-dot memristive systems have hysteresis current-voltage characteristics and quantum jump induced stochastic behaviour. Realising such a quantum memristor completes the menu of components for quantum circuit design.

cond-mat.mes-hall↗

arXiv2017

Fast measurement of carbon nanotube resonator amplitude with a heterojunction bipolar transistor

Carbon nanotube (CNT) electromechanical resonators have demonstrated unprecedented sensitivities for detecting small masses and forces. The detection speed in a cryogenic setup is usually limited by the CNT contact resistance and parasitic capacitance. We report the use of a heterojunction bipolar transistor (HBT) amplifying circuit near the device to measure the mechanical amplitude at microsecond timescales. A Coulomb rectification scheme, in which the probe signal is at much lower frequency than the mechanical drive signal, allows investigation of the strongly non-linear regime. The behaviour of transients in both the linear and non-linear regimes is observed and modeled by including Duffing and non-linear damping terms in a harmonic oscillator equation. We show that the non-linear regime can result in faster mechanical response times, on the order of 10 microseconds for the device and circuit presented, potentially enabling the magnetic moments of single molecules to be measured within their spin relaxation and dephasing timescales.

cond-mat.mes-hall↗

arXiv2016

Estimating the coherence of noise in quantum control of a solid-state qubit

To exploit a given physical system for quantum information processing, it is critical to understand the different types of noise affecting quantum control. Distinguishing coherent and incoherent errors is extremely useful as they can be reduced in different ways. Coherent errors are generally easier to reduce at the hardware level, e.g. by improving calibration, whereas some sources of incoherent errors, e.g. T2* processes, can be reduced by engineering robust pulses. In this work, we illustrate how purity benchmarking and randomized benchmarking can be used together to distinguish between coherent and incoherent errors and to quantify the reduction in both of them due to using optimal control pulses and accounting for the transfer function in an electron spin resonance system. We also prove that purity benchmarking provides bounds on the optimal fidelity and diamond norm that can be achieved by correcting the coherent errors through improving calibration.

quant-ph↗

arXiv2016

Nb/InAs nanowire proximity junctions from Josephson to quantum dot regimes

The superconducting proximity effect is probed experimentally in Josephson junctions fabricated with InAs nanowires contacted by Nb leads. Contact transparencies $t \sim 0.7$ are observed. The electronic phase coherence length at low temperatures exceeds the channel length. However, the elastic scattering length is a few times shorter than the channel length. Electrical measurements reveal two regimes of quantum transport: (i) the Josephson regime, characterized by a dissipationless current up to $\sim 100$ nA, and (ii) the quantum dot regime, characterized by the formation of Andreev Bound States (ABS) associated with spontaneous quantum dots inside the nanowire channel. In regime (i), the behaviour of the critical current $I_c$ versus an axial magnetic field $B_{||}$ shows an unexpected modulation and persistence to fields $>2$ T. In the quantum dot regime, the ABS are modelled as the current-biased solutions of an Anderson-type model. The applicability of devices in both transport regimes to Majorana fermion experiments is discussed.

cond-mat.mes-hall↗

arXiv2016

Electrical characterization of chemical and dielectric passivation of InAs nanowires

The native oxide at the surface of III-V nanowires, such as InAs, can be a major source of charge noise and scattering in nanowire-based electronics, particularly for quantum devices operated at low temperatures. Surface passivation provides a means to remove the native oxide and prevent its regrowth. Here, we study the effects of surface passivation and conformal dielectric deposition by measuring electrical conductance through nanowire field effect transistors treated with a variety of surface preparations. By extracting field effect mobility, subthreshold swing, threshold shift with temperature, and the gate hysteresis for each device, we infer the relative effects of the different treatments on the factors influencing transport. It is found that a combination of chemical passivation followed by deposition of an aluminum oxide dielectric shell yields the best results compared to the other treatments, and comparable to untreated nanowires. Finally, it is shown that an entrenched, top-gated device using an optimally treated nanowire can successfully form a stable double quantum dot at low temperatures. The device has excellent electrostatic tunability owing to the conformal dielectric layer and the combination of local top gates and a global back gate.

cond-mat.mes-hall↗

arXiv2016

Readout of Majorana parity states using a quantum dot

We theoretically examine a scheme for projectively reading out the parity state of a pair of Majorana bound states (MBS) using a tunnel coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir, and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved and charge transfer between the MBS and dot only occurs through resonant tunnelling. Resonance is controlled by the dot potential through a local gate and by the MBS energy splitting due to the overlap of the MBS pair wavefunctions. The latter splitting can be tuned from zero (topologically protected regime) to a finite value by gate-driven shortening of the topological wire. Simulations show that the oscillatory nature of the MBS splitting is not a fundamental obstacle to readout, but requires precise gate control of the MBS spatial position and dot potential. With experimentally realistic parameters, we find that high-fidelity parity readout is achievable given nanometer-scale spatial control of the MBS, and that there is a tradeoff between required precisions of temporal and spatial control. Use of the scheme to measure the MBS splitting versus separation would present a clear signature of topological order, and could be used to test the robustness of this order to spatial motion, a key requirement in certain schemes for scalable topological qubits. We show how the scheme can be extended to distinguish valid parity measurements from invalid ones due to gate calibration errors.

cond-mat.mes-hall↗

arXiv2016

Randomized benchmarking of quantum gates implemented by electron spin resonance

Spin systems controlled and probed by magnetic resonance have been valuable for testing the ideas of quantum control and quantum error correction. This paper introduces an X-band pulsed electron spin resonance spectrometer designed for high-fidelity coherent control of electron spins, including a loop-gap resonator for sub-millimeter sized samples with a control bandwidth ~ 40 MHz. Universal control is achieved by a single-sideband upconversion technique with an I-Q modulator and a 1.2 GS/s arbitrary waveform generator. A single qubit randomized benchmarking protocol quantifies the average errors of Clifford gates implemented by simple Gaussian pulses, using a sample of gamma-irradiated quartz. Improvements in unitary gate fidelity are achieved through phase transient correction and hardware optimization. A preparation pulse sequence that selects spin packets in a narrowed distribution of static fields confirms that inhomogeneous dephasing (1/T2*) is the dominant source of gate error. The best average fidelity over the Clifford gates obtained here is 99.2%, which serves as a benchmark to compare with other technologies.

quant-ph↗

arXiv2016

Chiral Quantum Walks

Given its importance to many other areas of physics, from condensed matter physics to thermodynamics, time-reversal symmetry has had relatively little influence on quantum information science. Here we develop a network-based picture of time-reversal theory, classifying Hamiltonians and quantum circuits as time-symmetric or not in terms of the elements and geometries of their underlying networks. Many of the typical circuits of quantum information science are found to exhibit time-asymmetry. Moreover, we show that time-asymmetry in circuits can be controlled using local gates only, and can simulate time-asymmetry in Hamiltonian evolution. We experimentally implement a fundamental example in which controlled time-reversal asymmetry in a palindromic quantum circuit leads to near-perfect transport. Our results pave the way for using time-symmetry breaking to control coherent transport, and imply that time-asymmetry represents an omnipresent yet poorly understood effect in quantum information science.

quant-ph↗