Searcharxiv⌕ Search

arXiv subjects

Jonathan P. K. Doye

Publications and source records attributed to Jonathan P. K. Doye.

At least 19 recordsLinked to original sources
arXiv2025

A patchy-particle 3-dimensional octagonal quasicrystal

We devise an ideal 3-dimensional octagonal quasicrystal that is based upon the 2-dimensional Ammann-Beenker tiling and that is potentially suitable for realization with patchy particles. Based on an analysis of its local environments we design a binary system of 8- and 5-patch particles that in simulations assembles into a 3-dimensional octagonal quasicrystal. The local structure is subtly different from the original ideal quasicrystal possessing a narrower coordination-number distribution; in fact, the 8-patch particles are not needed and a one-component system of the 5-patch particles assembles into an essentially identical octagonal quasicrystal. We also consider a one-component system of the 8-patch particles; this assembles into a cluster with a number of crystalline domains, but which, because of the coherent boundaries between the crystallites, has approximate eight-fold order. We envisage that these systems could be realized using DNA origami or protein design.

cond-mat.soft↗
arXiv2025

Chirality transfer in lyotropic twist-bend nematics

Using molecular simulations and classical density functional theory, we study the liquid-crystalline phase behaviour of a series of bent rod-like mesogens with a controlled degree of chirality introduced through a twist at the centre of the particle. In the achiral limit, isotropic, uniaxial nematic, twist-bend nematic and smectic phases form as the packing fraction increases. On introducing chirality, the symmetry between the right- and left-handed twist-bend phases is broken. The phase with the same-handedness as the particles quickly becomes overwhelmingly favoured as the magnitude of the particle twist is increased, because the particles are then able to better follow the helical director field lines in the twist-bend phase and pack more efficiently. By contrast, the cholesteric phase is predicted to have the opposite handedness to that of the particle due to the relatively weakly-twisted nature of the particles. That the cholesteric and twist-bend phases have opposite handedness illustrates the differences in the mechanisms of chirality transfer in the two phases. We also found that doping a system of achiral mesogens with a small fraction of chiral particles led to selection of the twist-bend phase with the same chirality as the particle.

cond-mat.soft↗
arXiv2025

A one-component patchy-particle icosahedral quasicrystal

Designing particles that are able to form icosahedral quasicrystals (IQCs) and that are as simple as possible is not only of fundamental interest but is also important to the potential realization of IQCs in materials other than metallic alloys. Here we introduce one-component patchy-particle systems that in simulations are able to form face-centred IQCs that are made up of interconnected icosahedra. The directional bonding of the particles facilitates the formation of a network of bonds with icosahedral orientational order and hence quasiperiodic positional order. The assembled quasicrystals have similar energies to periodic approximants but are entropically stabilized by phason disorder. Their long-range quasiperiodic order is confirmed by a higher-dimensional analysis. These materials, which are predicted to have an almost spherical photonic band gap, can potentially be realized via protein design and DNA origami particles.

cond-mat.soft↗
arXiv2023

Coarse-grained modelling of DNA-RNA hybrids

We introduce oxNA, a new model for the simulation of DNA-RNA hybrids which is based on two previously developed coarse-grained models$\unicode{x2014}$oxDNA and oxRNA. The model naturally reproduces the physical properties of hybrid duplexes including their structure, persistence length and force-extension characteristics. By parameterising the DNA-RNA hydrogen bonding interaction we fit the model's thermodynamic properties to experimental data using both average-sequence and sequence-dependent parameters. To demonstrate the model's applicability we provide three examples of its use$\unicode{x2014}$calculating the free energy profiles of hybrid strand displacement reactions, studying the resolution of a short R-loop and simulating RNA-scaffolded wireframe origami.

cond-mat.soft↗
arXiv2023

Pipelined information flow in molecular mechanical circuits leads to increased error and irreversibility

Pipelining is a design technique for logical circuits that allows for higher throughput than circuits in which multiple computations are fed through the system one after the other. It allows for much faster computation than architectures in which inputs must pass through every layer of the circuit before the next computation can begin (phased chaining). We explore the hypothesis that these advantages may be offset by a higher error rate, logical irreversibility and greater thermodynamic costs by simulating pipelined molecular mechanical circuits using an explicit physical model. We observe the emergent logical irreversibility, and see that the simultaneous action of multiple components indeed leads to a higher error rate than in phase-chained circuits. The thermodynamic costs of operating the gates are much larger than in equivalent phase-chained circuits, and these costs do not appear to tend to zero in the limit of slow gate operation. Redesigning the gates to eliminate errors and artificially enforcing logical reversibility reduces the thermodynamic costs and recovers thermodynamically reversible behaviour in the limit of slow gate operation. The breakdown of logical reversibility and accuracy are both associated with a breakdown of the digital behaviour of the device, likely contributing to thermodynamic costs that are large relative to the scale of the information being processed.

physics.comp-ph↗
arXiv2022

Simulation of reversible molecular mechanical logic gates and circuits

Landauer's principle places a fundamental lower limit on the work required to perform a logically irreversible operation. Logically reversible gates provide a way to avoid these work costs, and also simplify the task of making the computation as a whole thermodynamically reversible. The inherent reversibility of mechanical logic gates would make them good candidates for the design of practical logically reversible computing systems if not for the relatively large size and mass of such systems. In this paper, we outline the design and simulation of reversible molecular mechanical logic gates that come close to the limits of thermodynamic reversibility even under the effects of thermal noise, and outline associated circuit components from which arbitrary combinatorial reversible circuits can be constructed and simulated. We demonstrate that isolated components can be operated in a thermodynamically reversible manner, and explore the complexities of combining components to implement more complex computations. Finally, we demonstrate a method to construct arbitrarily large reversible combinatorial circuits using multiple external controls and signal boosters with a working half-adder circuit.

physics.comp-ph↗
arXiv2022

The free-energy landscape of a mechanically bistable DNA origami

Molecular simulations using coarse-grained models allow the structure, dynamics and mechanics of DNA origamis to be comprehensively characterized. Here, we focus on the free-energy landscape of a jointed DNA origami that has been designed to exhibit two mechanically stable states and for which a bistable landscape has been inferred from ensembles of structures visualized by electron microscopy. Surprisingly, simulations using the oxDNA model predict that the defect-free origami has a single free-energy minimum. The expected second state is not stable because the hinge joints do not simply allow free angular motion but instead lead to increasing free-energetic penalties as the joint angles relevant to the second state are approached. This raises interesting questions about the cause of this difference between simulations and experiment, such as how assembly defects might affect the ensemble of structures observed experimentally.

cond-mat.soft↗
arXiv2021

Free-energy landscapes of DNA and its assemblies: Perspectives from coarse-grained modelling

This chapter will provide an overview of how characterizing free-energy landscapes can provide insights into the biophysical properties of DNA, as well as into the behaviour of the DNA assemblies used in the field of DNA nanotechnology. The landscapes for these complex systems are accessible through the use of accurate coarse-grained descriptions of DNA. Particular foci will be the landscapes associated with DNA self-assembly and mechanical deformation, where the latter can arise from either externally imposed forces or internal stresses.

cond-mat.soft↗
arXiv2021

Characterizing the free-energy landscapes of DNA origamis

We show how coarse-grained modelling combined with umbrella sampling using distance-based order parameters can be applied to compute the free-energy landscapes associated with mechanical deformations of large DNA nanostructures. We illustrate this approach for the strong bending of DNA nanotubes and the potentially bistable landscape of twisted DNA origami sheets. The homogeneous bending of the DNA nanotubes is well described by the worm-like chain model; for more extreme bending the nanotubes reversibly buckle with the bending deformations localized at one or two "kinks". For a twisted one-layer DNA origami, the twist is coupled to the bending of the sheet giving rise to a free-energy landscape that has two nearly-degenerate minima that have opposite curvatures. By contrast, for a two-layer origami, the increased stiffness with respect to bending leads to a landscape with a single free-energy minimum that has a saddle-like geometry. The ability to compute such landscapes is likely to be particularly useful for DNA mechanotechnology and for understanding stress accumulation during the self-assembly of origamis into higher-order structures.

cond-mat.soft↗
arXiv2021

Programming patchy particles to form three-dimensional dodecagonal quasicrystals

Model patchy particles have been shown to be able to form a wide variety of structures, including symmetric clusters, complex crystals and even two-dimensional quasicrystals. Here, we investigate whether we can design patchy particles that form three-dimensional quasicrystals, in particular targeting a quasicrystal with dodecagonal symmetry that is made up of stacks of two-dimensional quasicrystalline layers. We obtain two designs that are able to form such a dodecagonal quasicrystal in annealing simulations. The first is a one-component system of 7-patch particles but with wide patches that allow them to adopt both 7- and 8-coordinated environments. The second is a ternary system that contains a mixture of 7- and 8-patch particles, and is likely to be more realizable in experiments, for example, using DNA origami. One interesting feature of the first system is that the resulting quasicrystals very often contain a screw dislocation.

cond-mat.soft↗
arXiv2020

Chiral shape fluctuations and the origin of chirality in cholesteric phases of DNA origamis

Lyotropic cholesteric liquid crystal phases are ubiquitously observed in biological and synthetic polymer solutions, characterized by a complex interplay between thermal fluctuations, entropic and enthalpic forces. The elucidation of the link between microscopic features and macroscopic chiral structure, and of the relative roles of these competing contributions on phase organization, remains a topical issue. Here we provide theoretical evidence of a novel mechanism of chirality amplification in lyotropic liquid crystals, whereby phase chirality is governed by fluctuation-stabilized helical deformations in the conformations of their constituent molecules. Our results compare favorably to recent experimental studies of DNA origami assemblies and demonstrate the influence of intra-molecular mechanics on chiral supra-molecular order, with potential implications for a broad class of experimentally-relevant colloidal systems.

cond-mat.soft↗
arXiv2020

Measuring internal forces in single-stranded DNA: Application to a DNA force clamp

We present a new method for calculating internal forces in DNA structures using coarse-grained models and demonstrate its utility with the oxDNA model. The instantaneous forces on individual nucleotides are explored and related to model potentials, and using our framework, internal forces are calculated for two simple DNA systems and for a recently-published nanoscopic force clamp. Our results highlight some pitfalls associated with conventional methods for estimating internal forces, which are based on elastic polymer models, and emphasise the importance of carefully considering secondary structure and ionic conditions when modelling the elastic behaviour of single-stranded DNA. Beyond its relevance to the DNA nanotechnological community, we expect our approach to be broadly applicable to calculations of internal force in a variety of structures -- from DNA to protein -- and across other coarse-grained simulation models.

cond-mat.soft↗
arXiv2020

Computing the elastic mechanical properties of rod-like DNA nanostructures

To study the elastic properties of rod-like DNA nanostructures, we perform long simulations of these structure using the oxDNA coarse-grained model. By analysing the fluctuations in these trajectories we obtain estimates of the bend and twist persistence lengths, and the underlying bend and twist elastic moduli and couplings between them. Only on length scales beyond those associated with the spacings between the interhelix crossovers do the bending fluctuations behave like those of a worm-like chain. The obtained bending persistence lengths are much larger than that for double-stranded DNA and increase non-linearly with the number of helices, whereas the twist moduli increase approximately linearly. To within the numerical error in our data, the twist-bend coupling constants are of order zero. That the bending persistence lengths we obtain are generally somewhat higher than in experiment probably reflects both that the simulated origami have no assembly defects and that the oxDNA extensional modulus for double-stranded DNA is too large.

cond-mat.soft↗
arXiv2020

Characterising DNA T-motifs by Simulation and Experiment

The success of DNA nanotechnology has been driven by the discovery of novel structural motifs with a wide range of shapes and uses. We present a comprehensive study of the T-motif, a 3-armed, planar, right-angled junction that has been used in the self-assembly of DNA polyhedra and periodic structures. The motif is formed through the interaction of a bulge loop in one duplex and a sticky end of another. The polarity of the sticky end has significant consequences for the thermodynamic and geometrical properties of the T-motif: different polarities create junctions spanning different grooves of the duplex. We compare experimental binding strengths with predictions of oxDNA, a coarse-grained model of DNA, for various loop sizes. We find that, although both sticky-end polarities can create stable junctions, junctions resulting from 5$'$ sticky ends are stable over a wider range of bulge loop sizes. We highlight the importance of possible coaxial stacking interactions within the motif and investigate how each coaxial stacking interaction stabilises the structure and favours a particular geometry.

q-bio.BM↗
arXiv2019

Programming patchy particles to form complex periodic structures

We introduce a scheme to design patchy particles so that a given target crystal is the global free-energy minimum at sufficiently low temperature. A key feature is a torsional component to the potential that only allows binding when particles have the correct relative orientations. In all examples studied, the target crystal structures readily assembled on annealing from a low-density fluid phase, albeit with the simpler target structures assembling more rapidly. The most complex example was a clathrate with 46 particles in its primitive unit cell. We also explored whether the structural information encoded in the particle interactions could be further reduced. For example, removing the torsional restrictions led to the assembly of an alternative crystal structure for the BC8-forming design, but the more complex clathrate design was still able to assemble because of the greater remaining specificity.

cond-mat.soft↗
arXiv2019

Incorporating particle flexibility in a density functional description of nematics and cholesterics

We describe a general implementation of the Fynewever-Yethiraj density functional theory (DFT) for the investigation of nematic and cholesteric self-assembly in arbitrary solutions of semi-flexible polymers. The basic assumptions of the theory are discussed in the context of other generalised Onsager descriptions for flexible polyatomic systems. The location of the isotropic-to-nematic phase transition is found to be in good agreement with molecular simulations for elongated chains up to relatively high polymer flexibilities, although the predictions of the theory in the nematic regime lead to gradual underestimations of order parameters with decreasing particle stiffness. This shortcoming is attributed to increasing overestimations of the molecular conformational entropy in higher-density phases, which may not be easily addressed in the formalism of DFT for realistic particle models. Practical consequences of these limitations are illustrated through the application of DFT to systems of near-persistence-length DNA duplexes, whose cholesteric behaviour is found to be strongly contingent on their detailed accessible conformational space in concentrated solutions.

cond-mat.soft↗
arXiv2018

Coarse-grained modelling of the structural properties of DNA origami

We use the oxDNA coarse-grained model to provide a detailed characterization of the fundamental structural properties of DNA origamis, focussing on archetypal 2D and 3D origamis. The model reproduces well the characteristic pattern of helix bending in a 2D origami, showing that it stems from the intrinsic tendency of anti-parallel four-way junctions to splay apart, a tendency that is enhanced both by less screened electrostatic interactions and by increased thermal motion. We also compare to the structure of a 3D origami whose structure has been determined by cryo-electron microscopy. The oxDNA average structure has a root-mean-square deviation from the experimental structure of 8.4 Angstrom, which is of the order of the experimental resolution. These results illustrate that the oxDNA model is capable of providing detailed and accurate insights into the structure of DNA origamis, and has the potential to be used to routinely pre-screen putative origami designs.

cond-mat.soft↗