arXiv subjects

Jonathan P. K. Doye

Publications and source records attributed to Jonathan P. K. Doye.

At least 37 records · Page 2Linked to original sources

arXiv2018

Perturbative density functional methods for cholesteric liquid crystals

We introduce a comprehensive numerical framework to generically infer the emergent macroscopic properties of uniaxial nematic and cholesteric phases from that of their microscopic constituent mesogens. This approach, based on the full numerical resolution of the Poniewierski-Stecki equations in the weak chirality limit, may expediently handle a wide range of particle models through the use of Monte-Carlo sampling for all virial-type integrals. Its predictions in terms of equilibrium cholesteric structures are found to be in excellent agreement with previous full-functional descriptions, thereby demonstrating the quantitative validity of the perturbative treatment of chirality for pitch lengths as short as a few dozen particle diameters. Furthermore, the use of the full angle-dependent virial coefficients in the Onsager-Parsons-Lee formalism increases its numerical efficiency by several orders of magnitude over that of these previous methods. The comparison of our results with numerical simulations however reveals some shortcomings of the Parsons-Lee approximation for systems of strongly non-convex particles, notwithstanding the accurate inclusion of their full effective molecular volume. Further potential limitations of our theory in terms of phase symmetry assumptions are also examined, and prospective directions for future improvements discussed.

cond-mat.soft↗

arXiv2018

Multi-scale coarse-graining for the study of assembly pathways in DNA-brick self assembly

Inspired by recent successes using single-stranded DNA tiles to produce complex structures, we develop a two-step coarse-graining approach that uses detailed thermodynamic calculations with oxDNA, a nucleotide-based model of DNA, to parametrize a coarser kinetic model that can reach the time and length scales needed to study the assembly mechanisms of these structures. We test the model by performing a detailed study of the assembly pathways for a two-dimensional target structure made up of 334 unique strands each of which are 42 nucleotides long. Without adjustable parameters, the model reproduces a critical temperature for the formation of the assembly that is close to the temperature at which assembly first occurs in experiments. Furthermore, the model allows us to investigate in detail the nucleation barriers and the distribution of critical nucleus shapes for the assembly of a single target structure. The assembly intermediates are compact and highly connected (although not maximally so) and classical nucleation theory provides a good fit to the height and shape of the nucleation barrier at temperatures close to where assembly first occurs.

cond-mat.soft↗

arXiv2017

Hierarchical bounding structures for efficient virial computations: Towards a realistic molecular description of cholesterics

We detail the application of bounding volume hierarchies to accelerate second-virial evaluations for arbitrary complex particles interacting through hard and soft finite-range potentials. This procedure, based on the construction of neighbour lists through the combined use of recursive atom-decomposition techniques and binary overlap search schemes, is shown to scale sub-logarithmically with particle resolution in the case of molecular systems with high aspect ratios. Its implementation within an efficient numerical and theoretical framework based on classical density functional theory enables us to investigate the cholesteric self-assembly of a wide range of experimentally-relevant particle models. We illustrate the method through the determination of the cholesteric behaviour of hard, structurally-resolved twisted cuboids, and report quantitative evidence of the long-predicted phase handedness inversion with increasing particle thread angles near the phenomenological threshold value of $45^\circ$. Our results further highlight the complex relationship between microscopic structure and helical twisting power in such model systems, which may be attributed to subtle geometric variations of their chiral excluded-volume manifold.

cond-mat.soft↗

arXiv2016

DNA-stabilized Ag-Au bimetallic clusters: The effects of alloying and embedding on optical properties

Global geometry optimization and time-dependent density functional theory calculations have been used to study the structural evolution and optical properties of (AgAu)n (n=2-6) nanoalloys both as individual clusters and as clusters stabilized with the fragments of DNA of different size. We show that alloying can be used to control and tune the level of interaction between the metal atoms of the cluster and the organic fragments of the DNA ligands. For instance, gold and silver atoms are shown to exhibit synergistic effects in the process of charge transfer from the nucleobase to the cluster, with the silver atoms directly connected to the nitrogen atoms of cytosine increasing their positive partial charge, while their more electronegative neighbouring gold atoms host the excess negative charge. This allows the geometrical structures and optical absorption spectra of small bimetallic clusters to retain many of their main features upon aggregation with relatively large DNA fragments, such as a cytosine-based 9-nucleotide hairpin loop, which suggests a potential synthetic route to such hybrid metal-organic compounds, and opens up the possibility of bringing the unique tunable properties of bimetallic nanoalloys to biological applications.

cond-mat.mtrl-sci↗

arXiv2016

Self-assembly of two-dimensional binary quasicrystals: A possible route to a DNA quasicrystal

We use Monte Carlo simulations and free-energy techniques to show that binary solutions of penta- and hexavalent two-dimensional patchy particles can form thermodynamically stable quasicrystals even at very narrow patch widths, provided their patch interactions are chosen in an appropriate way. Such patchy particles can be thought of as a coarse-grained representation of DNA multi-arm `star' motifs, which can be chosen to bond with one another very specifically by tuning the DNA sequences of the protruding arms. We explore several possible design strategies and conclude that DNA star tiles that are designed to interact with one another in a specific but not overly constrained way could potentially be used to construct soft quasicrystals in experiment. We verify that such star tiles can form stable dodecagonal motifs using oxDNA, a realistic coarse-grained model of DNA.

cond-mat.soft↗

arXiv2015

Coarse-grained modelling of strong DNA bending I: Thermodynamics and comparison to an experimental "molecular vice"

DNA bending is biologically important for genome regulation and is relevant to a range of nanotechnological systems. Recent results suggest that sharp bending is much easier than implied by the widely-used worm-like chain model; many of these studies, however, remain controversial. We use a coarse-grained model, previously fitted to DNA's basic thermodynamic and mechanical properties, to explore strongly bent systems. We find that as the end-to-end distance is decreased sufficiently short duplexes undergo a transition to a state in which the bending strain is localized at a flexible kink that involves disruption of base-pairing and stacking. This kinked state, which is not well-described by the worm-like chain model, allows the duplex to more easily be sharply bent. It is not completely flexible, however, due to constraints arising from the connectivity of both DNA backbones. We also perform a detailed comparison to recent experiments on a "molecular vice" that probes highly bent DNA. Close agreement between simulations and experiments strengthens the hypothesis that localised bending via kinking occurs in the molecular vice and causes enhanced flexibility of duplex DNA. Our calculations therefore suggests that the cost of kinking implied by this experiment is consistent with the known thermodynamic and mechanical properties of DNA.

q-bio.BM↗

arXiv2015

Coarse-grained modelling of strong DNA bending II: Cyclization

DNA cyclization is a powerful technique to gain insight into the nature of DNA bending. The worm-like chain model provides a good description of small to moderate bending fluctuations, but some experiments on strongly-bent shorter molecules suggest enhanced flexibility over and above that expected from the worm-like chain. Here, we use a coarse-grained model of DNA to investigate the thermodynamics of DNA cyclization for molecules with less than 210 base pairs. As the molecules get shorter we find increasing deviations between our computed equilibrium j-factor and the worm-like chain predictions of Shimada and Yamakawa. These deviations are due to sharp kinking, first at nicks, and only subsequently in the body of the duplex. At the shortest lengths, substantial fraying at the ends of duplex domains is the dominant method of relaxation. We also estimate the dynamic j-factor measured in recent FRET experiments. We find that the dynamic j-factor is systematically larger than its equilibrium counterpart, with the deviation larger for shorter molecules, because not all the stress present in the fully cyclized state is present in the transition state. These observations are important for the interpretation of recent experiments, as only kinking within the body of the duplex is genuinely indicative of non-worm-like chain behaviour.

q-bio.BM↗

arXiv2015

Coarse-grained modelling of supercoiled RNA

We study the behaviour of double-stranded RNA under twist and tension using oxRNA, a recently developed coarse-grained model of RNA. Introducing explicit salt-dependence into the model allows us to directly compare our results to data from recent single-molecule experiments. The model reproduces extension curves as a function of twist and stretching force, including the buckling transition and the behaviour of plectoneme structures. For negative supercoiling, we predict denaturation bubble formation in plectoneme end-loops, suggesting preferential plectoneme localisation in weak base sequences. OxRNA exhibits a positive twist-stretch coupling constant, in agreement with recent experimental observations.

q-bio.BM↗

arXiv2015

Introducing Improved Structural Properties and Salt Dependence into a Coarse-Grained Model of DNA

We introduce an extended version of oxDNA, a coarse-grained model of DNA designed to capture the thermodynamic, structural and mechanical properties of single- and double-stranded DNA. By including explicit major and minor grooves, and by slightly modifying the coaxial stacking and backbone-backbone interactions, we improve the ability of the model to treat large (kilobase-pair) structures such as DNA origami which are sensitive to these geometric features. Further, we extend the model, which was previously parameterised to just one salt concentration ([Na$^+$]=0.5M), so that it can be used for a range of salt concentrations including those corresponding to physiological conditions. Finally, we use new experimental data to parameterise the oxDNA potential so that consecutive adenine bases stack with a different strength to consecutive thymine bases, a feature which allows a more accurate treatment of systems where the flexibility of single-stranded regions is important. We illustrate the new possibilities opened up by the updated model, oxDNA2, by presenting results from simulations of the structure of large DNA objects and by using the model to investigate some salt-dependent properties of DNA.

q-bio.BM↗

arXiv2015

Force-induced rupture of a DNA duplex

The rupture of double-stranded DNA under stress is a key process in biophysics and nanotechnology. In this article we consider the shear-induced rupture of short DNA duplexes, a system that has been given new importance by recently designed force sensors and nanotechnological devices. We argue that rupture must be understood as an activated process, where the duplex state is metastable and the strands will separate in a finite time that depends on the duplex length and the force applied. Thus, the critical shearing force required to rupture a duplex within a given experiment depends strongly on the time scale of observation. We use simple models of DNA to demonstrate that this approach naturally captures the experimentally observed dependence of the critical force on duplex length for a given observation time. In particular, the critical force is zero for the shortest duplexes, before rising sharply and then plateauing in the long length limit. The prevailing approach, based on identifying when the presence of each additional base pair within the duplex is thermodynamically unfavorable rather than allowing for metastability, does not predict a time-scale-dependent critical force and does not naturally incorporate a critical force of zero for the shortest duplexes. Additionally, motivated by a recently proposed force sensor, we investigate application of stress to a duplex in a mixed mode that interpolates between shearing and unzipping. As with pure shearing, the critical force depends on the time scale of observation; at a fixed time scale and duplex length, the critical force exhibits a sigmoidal dependence on the fraction of the duplex that is subject to shearing.

cond-mat.soft↗

arXiv2015

CO Oxidation Catalysed by Pd-based Bimetallic Nanoalloys

Density functional theory based global geometry optimization has been used to demonstrate the crucial influence of the geometry of the catalytic cluster on the energy barriers for the CO oxidation reaction over Pd-based bimetallic nanoalloys. We show that dramatic geometry change between the reaction intermediates can lead to very high energy barriers and thus be prohibitive for the whole process. This introduces challenges for both the design of new catalysts, and theoretical methods employed. On the theory side, a careful choice of geometric configurations of all reaction intermediates is crucial for an adequate description of a possible reaction path. From the point of view of the catalyst design, the cluster geometry can be controlled by adjusting the level of interaction between the cluster and the dopant metal, as well as between the adsorbate molecules and the catalyst cluster by mixing different metals in a single nanoalloy particle. We show that substitution of a Pd atom in the Pd$_{5}$ cluster with a single Ag atom to form Pd$_{4}$Ag$_{1}$ leads to a potential improvement of the catalytic properties of the cluster for the CO oxidation reaction. On the other hand, a single Au atom does not enhance the properties of the catalyst, which is attributed to a weaker hybridization between the cluster's constituent metals and the adsorbate molecules. Such flexibility of properties of bimetallic nanoalloy clusters illustrates the possibility of fine-tuning, which might be used for design of novel efficient catalytic materials.

cond-mat.mtrl-sci↗

arXiv2014

Characterizing the bending and flexibility induced by bulges in DNA duplexes

Advances in DNA nanotechnology have stimulated the search for simple motifs that can be used to control the properties of DNA nanostructures. One such motif, which has been used extensively in structures such as polyhedral cages, two-dimensional arrays, and ribbons, is a bulged duplex, that is two helical segments that connect at a bulge loop. We use a coarse-grained model of DNA to characterize such bulged duplexes. We find that this motif can adopt structures belonging to two main classes: one where the stacking of the helices at the center of the system is preserved, the geometry is roughly straight and the bulge is on one side of the duplex, and the other where the stacking at the center is broken, thus allowing this junction to act as a hinge and increasing flexibility. Small loops favor states where stacking at the center of the duplex is preserved, with loop bases either flipped out or incorporated into the duplex. Duplexes with longer loops show more of a tendency to unstack at the bulge and adopt an open structure. The unstacking probability, however, is highest for loops of intermediate lengths, when the rigidity of single-stranded DNA is significant and the loop resists compression. The properties of this basic structural motif clearly correlate with the structural behavior of certain nano-scale objects, where the enhanced flexibility associated with larger bulges has been used to tune the self-assembly product as well as the detailed geometry of the resulting nanostructures.

cond-mat.soft↗

arXiv2014

Modelling toehold-mediated RNA strand displacement

We study the thermodynamics and kinetics of an RNA toehold-mediated strand displacement reaction with a recently developed coarse-grained model of RNA. Strand displacement, during which a single strand displaces a different strand previously bound to a complementary substrate strand, is an essential mechanism in active nucleic acid nanotechnology and has also been hypothesized to occur in vivo. We study the rate of displacement reactions as a function of the length of the toehold and temperature and make two experimentally testable predictions: that the displacement is faster if the toehold is placed at the 5' end of the substrate and that the displacement slows down with increasing temperature for longer toeholds.

physics.bio-ph↗

arXiv2014

The role of loop stacking in the dynamics of DNA hairpin formation

We study the dynamics of DNA hairpin formation using oxDNA, a nucleotide-level coarse-grained model of DNA. In particular, we explore the effects of the loop stacking interactions and non-native base pairing on the hairpin closing times. We find a non-monotonic variation of the hairpin closing time with temperature, in agreement with the experimental work of Wallace et al. [Proc. Nat. Acad. Sci. USA 2001, 98, 5584-5589]. The hairpin closing process involves the formation of an initial nucleus of one or two bonds between the stems followed by a rapid zippering of the stem. At high temperatures, typically above the hairpin melting temperature, an effective negative activation enthalpy is observed because the nucleus has a lower enthalpy than the open state. By contrast, at low temperatures, the activation enthalpy becomes positive mainly due to the increasing energetic cost of bending a loop that becomes increasingly highly stacked as the temperature decreases. We show that stacking must be very strong to induce this experimentally observed behavior, and that the existence of just a few weak stacking points along the loop can substantially suppress it. Non-native base pairs are observed to have only a small effect, slightly accelerating hairpin formation.

physics.bio-ph↗

arXiv2014

Ni-based nanoalloys: Towards thermally stable highly magnetic materials

Molecular dynamics simulations and density functional theory calculations have been used to demonstrate the possibility of preserving high spin states of the magnetic cores within Ni-based core-shell bimetallic nanoalloys over a wide range of temperatures. We show that, unlike the case of Ni-Al clusters, Ni-Ag clusters preserve high spin states (up to 8 $μ_{\mathrm{B}}$ in case of Ni$_{13}$Ag$_{32}$ cluster) due to small hybridization between the electronic levels of two species. Intriguingly, such clusters are also able to maintain geometrical and electronic integrity of their cores at temperatures up to 1000 K (e.g. for Ni$_{7}$Ag$_{27}$ cluster). Furthermore, we also show the possibility of creating ordered arrays of such magnetic clusters on a suitable support by soft-landing pre-formed clusters on the surface, without introducing much disturbance in geometrical and electronic structure of the cluster. We illustrate this approach with the example of Ni$_{13}$Ag$_{38}$ clusters adsorbed on the Si(111)-(7$\times$7) surface, which, having two distinctive halves to the unit cell, acts as a selective template for cluster deposition.

cond-mat.mtrl-sci↗

arXiv2014

DNA hairpins primarily promote duplex melting rather than inhibiting hybridization

The effect of secondary structure on DNA duplex formation is poorly understood. We use a coarse-grained model of DNA to show that specific 3- and 4-base pair hairpins reduce hybridization rates by factors of 2 and 10 respectively, in good agreement with experiment. By contrast, melting rates are accelerated by factors of ~100 and ~2000. This surprisingly large speed-up occurs because hairpins form during the melting process, stabilizing partially melted states, and facilitating dissociation. These results may help guide the design of DNA devices that use hairpins to modulate hybridization and dissociation pathways and rates.

cond-mat.soft↗

arXiv2014

Heterogeneous ice nucleation on silver-iodide-like surfaces

We attempt to simulate the heterogeneous nucleation of ice at model silver-iodide surfaces and find relatively facile ice nucleation and growth at the Ag+ termi nated basal face, but never see nucleation at the I- terminated basal face or the prism and normal faces. Water molecules strongly adsorb onto the Ag+ terminate d face to give a well-ordered hexagonal ice-like bilayer that then acts as a template for further ice growth.

cond-mat.mtrl-sci↗

arXiv2014

Effects of surface interactions on heterogeneous ice nucleation for a monatomic water model

Despite its importance in atmospheric science, much remains unknown about the microscopic mechanism of heterogeneous ice nucleation. In this work, we perform hybrid Monte Carlo simulations of the heterogeneous nucleation of ice on a range of generic surfaces, both flat and structured, in order to probe the underlying factors affecting the nucleation process. The structured surfaces we study comprise one basal plane bilayer of ice with varying lattice parameters and interaction strengths. We show that what determines the propensity for nucleation is not just the surface attraction, but also the orientational ordering imposed on liquid water near a surface. In particular, varying the ratio of the surface's attraction and orientational ordering can change the mechanism by which nucleation occurs: ice can nucleate on the structured surface even when the orientational ordering imposed by the surface is weak, as the water molecules that interact strongly with the surface are themselves a good template for further growth. We also show that lattice matching is important for heterogeneous nucleation on the structured surface we study. We rationalise these brute-force simulation results by explicitly calculating the interfacial free energies of ice and liquid water in contact with the nucleating surface and their variation with surface interaction parameters.

cond-mat.stat-mech↗