arXiv subjects

Jonathan Wierer

Publications and source records attributed to Jonathan Wierer.

4 recordsLinked to original sources

arXiv2026

Single-Mode Control of High-Speed and Low-Threshold III-V/Si Quantum Dot Microring Lasers via Azimuthal Gratings

Hybrid III-V/silicon quantum-dot microring lasers are compact, energy-efficient O-band sources, but their whispering-gallery cavities are inherently multimode and bidirectional, producing unstable mode hopping that is incompatible with dense wavelength-division multiplexing. We show that an azimuthal grating patterned into the silicon ring - a single lithographic degree of freedom - converts this multimode cavity into a wavelength-addressed, single-mode source. A coupled-mode analysis derives the angular-momentum selection rule from first principles and shows that the inner-wall corrugation replaces the degenerate counter-propagating pair with symmetric and anti-symmetric standing-wave supermodes of unequal radiative loss. At the second-order Bragg condition the anti-symmetric mode is symmetry-protected, yielding a high-quality-factor state at exactly one azimuthal order; finite-element simulations confirm this and identify grating depth as the primary loss-engineering handle. Devices fabricated in-house on a 100 mm silicon-on-insulator platform hold a single longitudinal order with a side-mode suppression ratio of 37.9 dB and continuous, hop-free tuning, while the emission wavelength stays fixed across a factor-of-two change in cavity loading, set lithographically rather than by the gain peak. Because the grating decouples the lasing wavelength from the quantum-dot gain, the detuning becomes a mask-level design variable that sets the temperature of minimum threshold current, reaching 1.95 mA near 50 {\deg}C. Combined with side-mode suppression beyond 37 dB and multi-gigahertz direct modulation, these lasers are practical building blocks for cascaded, wavelength-addressed transmitter arrays in data communication and co-packaged optics.

physics.optics↗

arXiv2026

PROPEL: A Memory-Driven, Adaptive Vector-Flow-Field Router with Process-Aware Waveguide Generation for Large-Scale Photonic Integrated Circuits

Photonic integrated circuits (PICs) are increasing in scale and routing complexity, driven by photonic computing, optical switching, programmable interferometer meshes, wavelength-routed optical networks-on-chip, and chip-to-chip optical interconnects. Manual waveguide planning becomes impractical as designs approach thousands of photonic components because routing must satisfy geometric, optical, electrical, and manufacturing constraints. This paper presents the Photonic Routing Optimization and Placement Engine (PROPEL), a memory-driven, native-accelerated adaptive vector-flow-field routing framework with process-aware waveguide generation for large-scale PIC design. PROPEL builds a routing kernel based on a bounded vector-flow-field algorithm and DRC validation. The same kernel supports passive optical routing, active optical-electrical routing, and topology-driven net assignment. C++ accelerates field and routing calculations, while Python performs detailed DRC replay, legality checking, route commitment, and GDSFactory-based geometry generation. Compared with state-of-the-art routing solutions, PROPEL is faster on 17 of 18 shared passive-routing cases, with a median speedup of 2.6x and a geometric-mean speedup of 2.5x, while maintaining zero design-rule violations. PROPEL also supports length, delay, and optical-path-length matching, process-map-aware waveguide generation, route-memory reuse, selective rip-up/reroute, and GDS-level legality replay. These capabilities address heterogeneous PIC layouts where optical, electrical, process, topology, matching, and manufacturability constraints must be handled together.

physics.optics↗

arXiv2026

Demonstration and Design of Uni-Directional and Ultra-Low Threshold Hybrid Quantum Dot III-V/Si Micro-Ring Laser

Micro-ring lasers (MRLs) are attractive light sources for energy-efficient optical interconnects, but their intrinsic directional bistability leads to unpredictable clockwise/counter-clockwise emission. We demonstrate stable unidirectional emission in hybrid quantum-dot (QD) III-V/Si MRLs using passive reflective feedback integrated on the bus waveguide, leaving the ring cavity unperturbed. Three reflector architectures - Y-splitter loop mirrors, adiabatic Y-splitter loop mirrors, and distributed Bragg reflectors (DBRs) - are benchmarked against a reflector-free bidirectional baseline through combined experiment and coupled-mode-theory rate-equation modeling. All designs preserve ultra-low thresholds of 0.79-1.12 mA (112-158 A/cm^2, roughly an order of magnitude below prior quantum-well unidirectional ring lasers) while enhancing single-facet output power and wall-plug efficiency, with directional isolation up to 27.65 dB for the DBR. The reflectors impose no penalty on the 4-5 GHz modulation bandwidth or its thermal robustness, establishing passive external feedback as a practical route to unidirectional QD MRLs for DWDM-scale optical interconnects.

physics.optics↗

arXiv2026

Experimental Design Space Exploration of Ultra-Low Threshold Hybrid III-V/Si Quantum Dot Microring Lasers

In this work, we report on the design strategies and experimental validation of ultra-low threshold ($< 0.8\,\mathrm{mA}$) hybrid III--V/Si quantum dot (InAs/GaAs) micro-ring lasers with optical output powers $> 2\,\mathrm{mW}$ for $1.3\,\mu\mathrm{m}$ emission. The multi-dimensional design exploration allows for the demonstration of record wall-plug efficiencies ($\sim 10\%$) and threshold current densities ($109\,\mathrm{A/cm^2}$) for these compact sources on silicon. We also demonstrate the thermal performance of several designs with record characteristic temperature values of $T_0 = 212\,\mathrm{K}$, indicating minimal temperature dependence of the threshold current. In addition, the high differential gain allows for the demonstration of 3-dB bandwidths up to $5\,\mathrm{GHz}$.

physics.optics↗