Searcharxiv⌕ Search

arXiv subjects

Joseph Silber

Publications and source records attributed to Joseph Silber.

12 recordsLinked to original sources
arXiv2026

A Hybrid R-Theta Fiber Positioning Robot Using a Piezoelectric Bender for Radial Motion

Future massively multiplexed spectroscopic surveys require focal planes with increasingly dense arrays of robotic fiber positioners. The DESI (Dark Energy Spectroscopic Instrument) fiber positioners, based on a two-axis Theta-Phi motorized architecture, have demonstrated excellent reliability and performance during operations and provide the benchmark for evaluating new concepts. However, proposed next-generation instruments such as Spec-S5 require a substantially smaller positioner pitch than DESI, making direct scaling of the existing design challenging. Here we describe a hybrid R-Theta fiber positioning concept in which the rotation about the central axis is provided by a DESI-like Theta motor, while the radial displacement is produced by a piezoelectric bimorph bender coupled to a lightweight carbon-fiber spine. This design builds on the heritage of the the proven central rotation mechanism while replacing the Phi arm with a compact piezoelectric actuator. We discuss the trade-offs between motorized positioners, piezoelectric slip-stick tilting spines, tubular piezo actuators, and direct piezo-bender actuation. A prototype based on a DESI positioner was fabricated and tested using a commercial bimorph bender and an 8-inch carbon-fiber extension. With closed-loop control using feedback from a fiber-view camera the fiber was brought on target after two corrections with residual stability of approximately 2 microns RMS. These results indicate that direct piezo-bender actuation is a promising approach for compact fiber positioning, provided that closed-loop operation is addressed.

astro-ph.IM↗
arXiv2026

A Natural $\gtrsim 100\times$ Telescope: Discovery of the Strongly Lensed Type II SN 2025mkn at $z=1.37$

We present the discovery of SN 2025mkn, a gravitationally lensed Type II supernova. First detected as a blue transient in ZTF, 0.83$^{\prime\prime}$ from a $z=0.42$ elliptical galaxy, follow-up SNIFS/UH2.2m and LRIS/Keck spectra revealed absorption lines at $z=1.371$. Later JWST NIRCam imaging shows that the bright transient is a close pair of point sources separated by $\sim 0.07^{\prime\prime}$, and a 30 times fainter counterimage opposite the lens, for which NIRSpec reveals strong H$\alpha$ emission also at $z=1.371$. The light curves and spectra are consistent with the Type II supernova source being magnified $\gtrsim 100$ times, with $\sim 250$ required to reconcile its luminosity with that of nearby events such as SN 2023ixf. Lens models are consistent with such high magnifications, and always show that the faint image arrived first (undetected in earlier ZTF imaging), consistent with the later spectral phase of this fainter image. A fourth image is also predicted and possibly detected in the NIRSpec data. Light-curve-based time-delay measurements are not possible due to the first image being the faintest; however, the resolved NIRSpec spectra offer a future opportunity for time-delay cosmography through supernova phase measurements.

astro-ph.CO↗
arXiv2025

Measurement of Parity-Violating Modes of the Dark Energy Spectroscopic Instrument (DESI) Year 1 Luminous Red Galaxies' 4-Point Correlation Function

Here we report the first measurement of the parity-violating (PV) 4-Point Correlation Function (4PCF) of the Dark Energy Spectroscopic Instrument's Year 1 Luminous Red Galaxy (DESI Y1 LRG) sample, motivated by the potential detection of the PV 4PCF in the Sloan Digital Sky Survey Baryon Oscillation Spectroscopic Survey (SDSS BOSS) galaxies. In our auto-correlation ("auto") analysis, we find a statistically significant excess of the PV signal compared to mocks without any PV, at 4-10$\sigma$ depending on details of the analysis. This could arise either from genuine PV or from an underestimation of the variance in the mocks; it is unlikely to arise, at the signal level, from a systematic. We then cross-correlate ("cross") the putative PV signal between different, independent patches of sky, and there find no detection of parity violation. The two measurements are in significant tension: while the cross has somewhat larger error bars than the auto, this is not sufficient to explain the discrepancy. We thus present the current work as an intriguing addition to the PV work on BOSS and as motivation for exploring further the relationship between the auto and cross PV 4PCF analyses.

astro-ph.CO↗
arXiv2025

The Spectroscopic Stage-5 Experiment

The existence, properties, and dynamics of the dark sectors of our universe pose fundamental challenges to our current model of physics, and large-scale astronomical surveys may be our only hope to unravel these long-standing mysteries. In this white paper, we describe the science motivation, instrumentation, and survey plan for the next-generation spectroscopic observatory, the Stage-5 Spectroscopic Experiment (Spec-S5). Spec-S5 is a new all-sky spectroscopic instrument optimized to efficiently carry out cosmological surveys of unprecedented scale and precision. The baseline plan for Spec-S5 involves upgrading two existing 4-m telescopes to new 6-m wide-field facilities, each with a highly multiplexed spectroscopic instrument capable of simultaneously measuring the spectra of 13,000 astronomical targets. Spec-S5, which builds and improves on the hardware used for previous cosmology experiments, represents a cost-effective and rapid approach to realizing a more than 10$\times$ gain in spectroscopic capability compared to the current state-of-the-art represented by the Dark Energy Spectroscopic Instrument project (DESI). Spec-S5 will provide a critical scientific capability in the post-Rubin and post-DESI era for advancing cosmology, fundamental physics, and astrophysics in the 2030s.

astro-ph.CO↗
arXiv2024

High redshift LBGs from deep broadband imaging for future spectroscopic surveys

Lyman break galaxies (LBGs) are promising probes for clustering measurements at high redshift, $z>2$, a region only covered so far by Lyman-$\alpha$ forest measurements. In this paper, we investigate the feasibility of selecting LBGs by exploiting the existence of a strong deficit of flux shortward of the Lyman limit, due to various absorption processes along the line of sight. The target selection relies on deep imaging data from the HSC and CLAUDS surveys in the $g,r,z$ and $u$ bands, respectively, with median depths reaching 27 AB in all bands. The selections were validated by several dedicated spectroscopic observation campaigns with DESI. Visual inspection of spectra has enabled us to develop an automated spectroscopic typing and redshift estimation algorithm specific to LBGs. Based on these data and tools, we assess the efficiency and purity of target selections optimised for different purposes. Selections providing a wide redshift coverage retain $57\%$ of the observed targets after spectroscopic confirmation with DESI, and provide an efficiency for LBGs of $83\pm3\%$, for a purity of the selected LBG sample of $90\pm2\%$. This would deliver a confirmed LBG density of $\sim 620$ deg$^{-2}$ in the range $2.3<z<3.5$ for a $r$-band limiting magnitude $r<24.2$. Selections optimised for high redshift efficiency retain $73\%$ of the observed targets after spectroscopic confirmation, with $89\pm4\%$ efficiency for $97\pm2\%$ purity. This would provide a confirmed LBG density of $\sim 470$ deg$^{-2}$ in the range $2.8<z<3.5$ for a $r$-band limiting magnitude $r<24.5$. A preliminary study of the LBG sample 3d-clustering properties is also presented and used to estimate the LBG linear bias. A value of $b_{LBG} = 3.3 \pm 0.2 (stat.)$ is obtained for a mean redshift of 2.9 and a limiting magnitude in $r$ of 24.2, in agreement with results reported in the literature.

astro-ph.CO↗
arXiv2022

The MegaMapper: A Stage-5 Spectroscopic Instrument Concept for the Study of Inflation and Dark Energy

In this white paper, we present the MegaMapper concept. The MegaMapper is a proposed ground-based experiment to measure Inflation parameters and Dark Energy from galaxy redshifts at $2<z<5$. In order to achieve path-breaking results with a mid-scale investment, the MegaMapper combines existing technologies for critical path elements and pushes innovative development in other design areas. To this aim, we envision a 6.5-m Magellan-like telescope, with a newly designed wide field, coupled with DESI spectrographs, and small-pitch robots to achieve multiplexing of at least 26,000. This will match the expected achievable target density in the redshift range of interest and provide a 10x capability over the existing state-of the art, without a 10x increase in project budget.

astro-ph.IM↗
arXiv2022

A Spectroscopic Road Map for Cosmic Frontier: DESI, DESI-II, Stage-5

In this white paper, we present an experimental road map for spectroscopic experiments beyond DESI. DESI will be a transformative cosmological survey in the 2020s, mapping 40 million galaxies and quasars and capturing a significant fraction of the available linear modes up to z=1.2. DESI-II will pilot observations of galaxies both at much higher densities and extending to higher redshifts. A Stage-5 experiment would build out those high-density and high-redshift observations, mapping hundreds of millions of stars and galaxies in three dimensions, to address the problems of inflation, dark energy, light relativistic species, and dark matter. These spectroscopic data will also complement the next generation of weak lensing, line intensity mapping and CMB experiments and allow them to reach their full potential.

astro-ph.CO↗
arXiv2021

Installation of the Dark Energy Spectroscopic Instrument at the Mayall 4-meter telescope

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. We describe the installation of the major elements of the instrument at the Mayall 4m telescope, completed in late 2019. The previous prime focus corrector, spider vanes, and upper rings were removed from the Mayall's Serrurier truss and replaced with the newly-constructed DESI ring, vanes, cage, hexapod, and optical corrector. The new corrector was optically aligned with the primary mirror using a laser tracker system. The DESI focal plane system was integrated to the corrector, with each of its ten 500-fiber-positioner petal segments installed using custom installation hardware and the laser tracker. Ten DESI spectrographs with 30 cryostats were installed in a newly assembled clean room in the Large Coude Room. The ten cables carrying 5000 optical fibers from the positioners in the focal plane were routed down the telescope through cable wraps at the declination and hour angle axes, and their integral slitheads were integrated with the ten spectrographs. The fiber view camera assembly was installed to the Mayall's primary mirror cell. Servers for the instrument control system replaced existing computer equipment. The fully integrated instrument has been commissioned and is ready to start its operations phase.

astro-ph.IM↗
arXiv2018

Dark Energy Spectroscopic Instrument (DESI) Fiber Positioner Production

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. We will describe the production and manufacturing processes developed for the 5000 fiber positioner robots mounted on the focal plane of the Mayall telescope.

astro-ph.IM↗
arXiv2018

ProtoDESI: First On-Sky Technology Demonstration for the Dark Energy Spectroscopic Instrument

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the universe using the baryon acoustic oscillations technique. The spectra of 35 million galaxies and quasars over 14,000 square degrees will be measured during a 5-year survey. A new prime focus corrector for the Mayall telescope at Kitt Peak National Observatory will deliver light to 5,000 individually targeted fiber-fed robotic positioners. The fibers in turn feed ten broadband multi-object spectrographs. We describe the ProtoDESI experiment, that was installed and commissioned on the 4-m Mayall telescope from August 14 to September 30, 2016. ProtoDESI was an on-sky technology demonstration with the goal to reduce technical risks associated with aligning optical fibers with targets using robotic fiber positioners and maintaining the stability required to operate DESI. The ProtoDESI prime focus instrument, consisting of three fiber positioners, illuminated fiducials, and a guide camera, was installed behind the existing Mosaic corrector on the Mayall telescope. A Fiber View Camera was mounted in the Cassegrain cage of the telescope and provided feedback metrology for positioning the fibers. ProtoDESI also provided a platform for early integration of hardware with the DESI Instrument Control System that controls the subsystems, provides communication with the Telescope Control System, and collects instrument telemetry data. Lacking a spectrograph, ProtoDESI monitored the output of the fibers using a Fiber Photometry Camera mounted on the prime focus instrument. ProtoDESI was successful in acquiring targets with the robotically positioned fibers and demonstrated that the DESI guiding requirements can be met.

astro-ph.IM↗
arXiv2018

The STAR MAPS-based PiXeL detector

The PiXeL detector (PXL) for the Heavy Flavor Tracker (HFT) of the STAR experiment at RHIC is the first application of the state-of-the-art thin Monolithic Active Pixel Sensors (MAPS) technology in a collider environment. Custom built pixel sensors, their readout electronics and the detector mechanical structure are described in detail. Selected detector design aspects and production steps are presented. The detector operations during the three years of data taking (2014-2016) and the overall performance exceeding the design specifications are discussed in the conclusive sections of this paper.

physics.ins-det↗