arXiv subjects

Joshua B. Surya

Publications and source records attributed to Joshua B. Surya.

15 recordsLinked to original sources

arXiv2023

Two-colour dissipative solitons and breathers in microresonator second-harmonic generation

Frequency conversion of dissipative solitons associated with the generation of broadband optical frequency combs having a tooth spacing of hundreds of giga-hertz is a topical challenge holding the key to practical applications in precision spectroscopy and data processing. The work in this direction is underpinned by fundamental problems in nonlinear and quantum optics. Here, we present the dissipative two-colour bright-bright and dark-dark solitons in a quasi-phase-matched microresonator pumped for the second-harmonic generation in the near-infrared spectral range. We also found the breather states associated with the pulse front motion and collisions. The soliton regime is found to be typical in slightly phase-mismatched resonators, while the phase-matched ones reveal broader but incoherent spectra and higher-order harmonic generation. Soliton and breather effects reported here exist for the negative tilt of the resonance line, which is possible only via the dominant contribution of second-order nonlinearity.

physics.optics↗

arXiv2021

Ultralow-threshold thin-film lithium niobate optical parametric oscillator

Materials with strong $χ^{(2)}$ optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss $χ^{(2)}$ materials remains challenging and limits the threshold power of on-chip $χ^{(2)}$ OPO. Here we report the first on-chip lithium niobate optical parametric oscillator at the telecom wavelengths using a quasi-phase matched, high-quality microring resonator, whose threshold power ($\sim$30 $μ$W) is 400 times lower than that in previous $χ^{(2)}$ integrated photonics platforms. An on-chip power conversion efficiency of 11% is obtained at a pump power of 93 $μ$W. The OPO wavelength tuning is achieved by varying the pump frequency and chip temperature. With the lowest power threshold among all on-chip OPOs demonstrated so far, as well as advantages including high conversion efficiency, flexibility in quasi-phase matching and device scalability, the thin-film lithium niobate OPO opens new opportunities for chip-based tunable classical and quantum light sources and provides an potential platform for realizing photonic neural networks.

physics.optics↗

arXiv2020

III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing

Frequency microcombs, successors to mode-locked laser and fiber combs, enable miniature rulers of light for applications including precision metrology, molecular fingerprinting, and exoplanet discoveries. To enable the frequency ruling function, microcombs must be stabilized by locking their carrier-envelop offset frequency. So far, the microcomb stabilization remains compounded by the elaborate optics external to the chip, thus evading its scaling benefit. To address this challenge, here we demonstrate a nanophotonic chip solution based on aluminum nitride thin films, which simultaneously offer optical Kerr nonlinearity for generating octave soliton combs and Pockels nonlinearity for enabling heterodyne detection of the offset frequency. The agile dispersion control of crystalline III-Nitride photonics permits high-fidelity generation of solitons with features including 1.5-octave comb span, dual dispersive waves, and sub-terahertz repetition rates down to 220 gigahertz. These attractive characteristics, aided by on-chip phase-matched aluminum nitride waveguides, allow the full determination of the offset frequency. Our proof-of-principle demonstration represents an important milestone towards fully-integrated self-locked microcombs for portable optical atomic clocks and frequency synthesizers.

physics.app-ph↗

arXiv2020

Stable tuning of photorefractive micro-cavities using an auxiliary laser

Cavity nonlinear optics enables intriguing physical phenomena to occur at micro- or nano-scales with modest input powers. While this enhances capabilities in applications such as comb generation, frequency conversion and quantum optics, undesired nonlinear effects including photorefraction and thermal bistability are exacerbated. In this letter, we propose and demonstrate a highly effective method of achieving cavity stabilization using an auxiliary laser for controlling photorefraction in a z-cut periodically poled lithium niobate (LN) microcavity system. Our numerical study accurately models the photorefractive effect under high input powers, guiding future analyses and development of LN microcavity systems.

physics.optics↗

arXiv2020

Efficient frequency conversion in a degenerate $χ^{(2)}$ microresonator

Microresonators on a photonic chip could enhance nonlinear optics effects, thus are promising for realizing scalable high-efficiency frequency conversion devices. However, fulfilling phase matching conditions among multiple wavelengths remains a significant challenge. Here, we present a feasible scheme for degenerate sum-frequency conversion that only requires the two-mode phase matching condition. When the drive and the signal are both near resonance to the same telecom mode, an efficient on-chip photon-number conversion efficiency upto 42% was achieved, showing a broad tuning bandwidth over 250GHz. Furthermore, cascaded Pockels and Kerr nonlinear optical effects are observed, enabling the parametric amplification of the optical signal to a distinct wavelength in a single device. The scheme demonstrated in this work provides an alternative approach to realizing high-efficiency frequency conversion and is promising for future studies on communications, atom clocks, sensing, and imaging.

physics.optics↗

arXiv2020

Photonic dissipation control for Kerr soliton generation in strongly Raman-active media

Microcavity solitons enable miniaturized coherent frequency comb sources. However, the formation of microcavity solitons can be disrupted by stimulated Raman scattering (SRS), particularly in the emerging crystalline microcomb materials with high Raman gain. Here, we propose and implement dissipation control---tailoring the energy dissipation of selected cavity modes---to purposely raise/lower the threshold of Raman lasing in a strongly Raman-active lithium niobate microring resonator, and realize on-demand soliton mode-locking or Raman lasing. Numerical simulations are carried out to confirm our analyses and agree well with experiment results. Our work demonstrates an effective approach to address strong SRS for microcavity soliton generation.

physics.optics↗

arXiv2020

Pockels Soliton Microcomb

Kerr soliton microcombs have recently emerged as a prominent topic in integrated photonics and enabled new horizons for optical frequency metrology. Kerr soliton microcombs, as its name suggests, are based on the high-order cubic optical nonlinearity. It is desirable to exploit quadratic photonic materials, namely Pockels materials, for soliton generation and on-chip implementation of 1f-2f comb self-referencing. Such quadratically-driven solitons have been theoretically proposed, but have not yet been observed in a nanophotonic platform despite of recent progresses in quadratic comb generation in free-space and crystalline resonators. Here we report photonic chip-based Pockels microcomb solitons driven by three-wave mixing in an aluminum nitride microring resonator. In contrast to typical Kerr solitons, our Pockels soliton features unity soliton generation fidelity, two-by-two annihilation of multi-soliton states, favorable tuning dynamics, and high pump-to-soliton conversion efficiency.

physics.optics↗

arXiv2019

Beyond 100 THz-spanning ultraviolet frequency combs in a non-centrosymmetric crystalline waveguide

Ultraviolet frequency combs enable applications ranging from precision spectroscopy to atomic clocks by addressing the electronic transitions of atoms and molecules. Access to ultraviolet light via integrated nonlinear optics is usually hampered by the strong material dispersion and large waveguide attention in the ultraviolet region. Here we demonstrate a simple route to chip-scale ultraviolet comb generators, simultaneously showing a gap-free frequency span of ~128 terahertz and supercontinuum sourced by an ultrafast fiber laser. The simultaneous cubic and quadratic nonlinear processes are implemented in single-crystalline aluminum nitride thin films, where a chirp-modulated taper waveguide is patterned to ensure a broad phase matching. The heterodyne beatnote characterization suggests that both the near-visible and ultraviolet supercontinuum combs maintain a high degree of coherence. Our approach is also adaptable to other non-centrosymmetric photonic platforms for ultrafast nonlinear optics with scalable bandwidth.

physics.optics↗

arXiv2019

Periodically poled thin film lithium niobate microring resonators with a second-harmonic generation efficiency of 250,000%/W

Lithium niobate (LN), dubbed by many as the silicon of photonics, has recently risen to the forefront of chip-scale nonlinear optics research since its demonstration as an ultralow-loss integrated photonics platform. Due to its significant quadratic nonlinearity ($χ^{(2)}$), LN inspires many important applications such as second-harmonic generation (SHG), spontaneous parametric down-conversion, and optical parametric oscillation. Here, we demonstrate high-efficiency SHG in dual-resonant, periodically poled z-cut LN microrings, where quasi-phase matching is realized by field-assisted domain engineering. Meanwhile, dual-band operation is accessed by optimizing the coupling conditions in fundamental and second-harmonic bands via a single pulley waveguide. As a result, when pumping a periodically poled LN microring in the low power regime at around 1617nm, an on-chip SHG efficiency of 250,000%/W is achieved, a state-of-the-art value reported among current integrated photonics platforms. An absolute conversion efficiency of 15% is recorded with a low pump power of 115$μ$W in the waveguide. Such periodically poled LN microrings also present a versatile platform for other cavity-enhanced quasi-phase matched $χ^{(2)}$ nonlinear optical processes.

physics.optics↗

arXiv2019

On-chip $χ^{(2)}$ microring optical parametric oscillator

Optical parametric oscillators (OPOs) have been widely used for decades as tunable, narrow linewidth, and coherent light sources for reaching long wavelengths and are attractive for applications such as quantum random number generation and Ising machines. To date, waveguide-based OPOs have suffered from relatively high thresholds on the order of hundreds of milliwatts. With the advance in integrated photonic techniques demonstrated by high-efficiency second harmonic generation in aluminum nitride (AlN) photonic microring resonators, highly compact and nanophotonic implementation of parametric oscillation is feasible. Here, we employ phase-matched AlN microring resonators to demonstrate low-threshold parametric oscillation in the telecom infrared band with an on-chip efficiency up to 17% and milliwatt-level output power. A broad phase-matching window is observed, enabling tunable generation of signal and idler pairs over a 180 nm bandwidth across the C band. This result establishes an important milestone in integrated nonlinear optics and paves the way towards chip-based quantum light sources and tunable, coherent radiation for spectroscopy and chemical sensing.

physics.optics↗

arXiv2019

Infrared Laser Locking to Rubidium Saturated Absorption Spectrum via a Photonic Chip Frequency Doubler

Photonic integrated resonators stand out as reliable frequency converters due to their compactness and stability, with second-harmonic generation (SHG) efficiencies of up to 17000%/W reported recently in aluminum nitride microrings. In this work, a sufficiently strong second-harmonic (SH) signal up to microwatts was generated by a photonic integrated frequency doubler using a milliwatt infrared (IR) laser source. Furthermore, increased SHG bandwidth covering $^{85}$Rb and $^{87}$Rb D$_2$ transition lines as well as saturated absorption spectroscopy (SAS) were demonstrated by tuning the pump power and chip temperature. Here, we present, to the best of our knowledge, the first successful locking of an IR laser to Rb saturated absorption lines via a photonic chip frequency doubler.

physics.ins-det↗

arXiv2018

17,000 %/W Second Harmonic Conversion Efficiency in Single Crystalline Aluminum Nitride Microresonators

High quality factor optical microcavities have been employed in a variety of material systems to enhance nonlinear optical interactions. While single-crystalline aluminum nitride microresonators have recently emerged as a low loss platform for integrated nonlinear optics such as four wave mixing and Raman lasing, few studies have investigated this material for second-harmonic generation. In this Letter, we demonstrate an optimized fabrication of dually-resonant phase-matched ring resonators from epitaxial aluminum nitride thin films. An unprecendented second-harmonic generation efficiency of 17,000%/W is obtained in the low power regime and pump depletion is observed at a relatively low input power of 3.5 mW. This poses epitaxial aluminum nitride as the highest efficiency second-harmonic generator among current integrated platforms.

physics.optics↗

arXiv2018

Ultra-high-Q UV microring resonators based on single-crystalline AlN platform

Development of low-loss photonic components in the ultraviolet (UV) band will open new prospects for classical and quantum optics. Compared with other integrated platforms, aluminum nitride (AlN) is particularly attractive as it features an enormous bandgap of ~6.2 eV and intrinsic chi(2) and chi(3) susceptibilities. In this work, we demonstrate a record quality factor of 2.1 x 105 (optical loss ~ 8 dB/cm) at 390 nm based on single-crystalline AlN microrings. The low-loss AlN UV waveguide represents a significant milestone toward UV photonic integrated circuits as it features full compatibility for future incorporation of AlGaN-based UV emitters and receivers. On-chip UV spectroscopy, nonlinear optics and quantum information processing can also be envisioned.

physics.app-ph↗

arXiv2018

Control of Second Harmonic Generation in Doubly Resonant Aluminum Nitride Microrings to Address Rubidium Two-Photon Clock Transition

Nonlinear optical effects have been studied extensively in microresonators as more photonics applications transition to integrated on-chip platforms. Due to low optical losses and small mode volumes, microresonators are demonstrably the state-of-the-art platform for second harmonic generation (SHG). However, the working bandwidth of such microresonator-based devices are relatively small, presenting a challenge for applications where a specifically targeted wavelength needs to be addressed. In this work, we analyzed the phase-matching window and resonance wavelength with respect to varying microring width, radius and temperature. A chip with precise design parameters was fabricated with phase-matching realized at the exact wavelength of two-photon transition of 85-Rubidium. This procedure can be generalized to any target pump wavelength in the telecom-band with picometer precision.

physics.optics↗

arXiv2017

Efficient Third Harmonic Generation in Composite Aluminum Nitride / Silicon Nitride Microrings

Aluminum nitride and silicon nitride have recently emerged as important nonlinear optical materials in integrated photonics respectively for their quadratic and cubic optical nonlinearity. A composite aluminum nitride and silicon nitride waveguide structure, if realized, will simultaneously allow highly efficient second and third harmonic generation on the same chip platform and therefore assists 2f-3f self-referenced frequency combs. On-chip third harmonic generation, being a higher order nonlinear optics effect, is more demanding than second harmonic generation due to the large frequency difference between the fundamental and third harmonic frequencies which implies large change of refractive indices and more strigent requirements on phase matching. In this work we demonstrate high-efficiency third harmonic generation in a high Q composite aluminum nitride / silicon nitide ring cavity. By carefully engineering the microring resonator geometry of the bilayer structure to optimize the quality factor, mode volume and modal overlap of the optical fields, we report a maximum conversion efficiency of $180\%\,\mathrm{W^{-2}}$. This composite photonic chip design provides a solution for efficient frequency conversion over a large wavelength span, broadband comb generation and self-referenced frequency combs.

physics.optics↗