arXiv subjects

Joshua Combes

Publications and source records attributed to Joshua Combes.

At least 55 records · Page 3Linked to original sources

arXiv2015

Weak-value amplification: state of play

Weak values arise in quantum theory when the result of a weak measurement is conditioned on a subsequent strong measurement. The majority of the trials are discarded, leaving only very few successful events. Intriguingly those can display a substantial signal amplification. This raises the question of whether weak values carry potential to improve the performance of quantum sensors, and indeed a number of impressive experimental results suggested this may be the case. By contrast, recent theoretical studies have found the opposite: using weak-values to obtain an amplification generally worsens metrological performance. This survey summarises the implications of those studies, which call for a reappraisal of weak values' utility and for further work to reconcile theory and experiment.

quant-ph↗

arXiv2015

Cost of postselection in decision theory

Postselection is the process of discarding outcomes from statistical trials that are not the event one desires. Postselection can be useful in many applications where the cost of getting the wrong event is implicitly high. However, unless this cost is specified exactly, one might conclude that discarding all data is optimal. Here we analyze the optimal decision rules and quantum measurements in a decision theoretic setting where a prespecified cost is assigned to discarding data. Our scheme interpolates between unambiguous state discrimination (when the cost of postselection is zero) and a minimum error measurement (when the cost of postselection is maximal). We also relate our formulation to previous approaches which focus on minimizing the probability of indecision.

quant-ph↗

arXiv2015

An integrated quantum photonic sensor based on Hong-Ou-Mandel interference

Photonic-crystal-based integrated optical systems have been used for a broad range of sensing applications with great success. This has been motivated by several advantages such as high sensitivity, miniaturization, remote sensing, selectivity and stability. Many photonic crystal sensors have been proposed with various fabrication designs that result in improved optical properties. In parallel, integrated optical systems are being pursued as a platform for photonic quantum information processing using linear optics and Fock states. Here we propose a novel integrated Fock state optical sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an "effective beam splitter". The sensor works based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We demonstrate this generic scheme in coupled L3 photonic crystal cavities as an example and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as $10^{-7}$ Newtons and can measure one part per million change in refractive index using a very low input power of $10^{-10}$W. Thus linear optical quantum photonic architectures can achieve comparable sensor performance to semiclassical devices.

quant-ph↗

arXiv2014

Rapid readout of a register of qubits using open loop quantum control

Measurements are a primitive for characterizing quantum systems. Reducing the time taken to perform a measurement may be beneficial in many areas of quantum information processing. We show that permuting the eigenvalues of the state matrix in the logical basis, using open loop control, provides a $O(n)$ reduction in the measurement time, where $n$ is the number of qubits in the register. This reduction is of the same order as the (previously introduced) locally optimal feedback protocol. The advantage of the open loop protocol is that it is far less difficult experimentally. Because the control commutes with the measured observable at all times, our rapid measurement protocol could be used for characterizing a quantum system, by state or process tomography, or to implement measurement-based quantum error correction.

quant-ph↗

arXiv2014

Classical correlation alone supplies the anomaly to weak values

The question of what is genuinely quantum about weak values is only ever going to elicit strongly subjective opinions---it is not a scientific question. Good questions, when comparing theories, are operational---they deal with the unquestionable outcomes of experiment. We give the anomalous shift of weak values an objective meaning through a generalization to an operational definition of anomalous post-selected averages. We show the presence of these averages necessitate correlations in every model giving rise to them---quantum or classical. Characterizing such correlations shows that they are ubiquitous. We present the simplest classical example without the need of disturbance realizing these generalized anomalous weak values.

quant-ph↗

arXiv2014

How the result of a single coin toss can turn out to be 100 heads

We show that the phenomenon of anomalous weak values is not limited to quantum theory. In particular, we show that the same features occur in a simple model of a coin subject to a form of classical backaction with pre- and post-selection. This provides evidence that weak values are not inherently quantum, but rather a purely statistical feature of pre- and post-selection with disturbance.

quant-ph↗

arXiv2014

Global versus local optimality in feedback-controlled qubit purification: new insights from minimizing Rényi entropies

It was first shown by Jacobs, in 2003, that the process of qubit state purification by continuous measurement of one observable can be enhanced, on average, by unitary feedback control. Here, we quantify this by the reduction in any one of the family of Rényi entropies $S_α$, with $0< α< \infty$, at some terminal time, revealing the rich structure of stochastic quantum control even for this simple problem. We generalize Jacobs' original argument, which was for (the unique) impurity measure with a linear evolution map under his protocol, by replacing linearity with convexity, thereby making it applicable to Rényi entropies $S_α$ for $α$ in a finite interval about $1$. Even with this generalization, Jacobs' argument fails to identify the surprising fact, which we prove by Bellman's principle of dynamic programming, that his protocol is globally optimal for all Rényi entropies whose decrease is locally maximized by that protocol. Also surprisingly, even though there is a range of Rényi entropies whose decrease is always locally maximized by the null-control protocol, that null-control protocol cannot be shown to be globally optimal in any instance. These results highlight the non-intuitive relation between local and global optimality in stochastic quantum control.

quant-ph↗

arXiv2014

In-situ characterization of quantum devices with error correction

Syndrome measurements made in quantum error correction contain more information than is typically used. We show that the statistics of data from syndrome measurements can be used to do the following: (i) estimation of parameters of an error channel, including the ability correct away the invertible part of the error channel, once it is estimated; (ii) hypothesis testing (or model selection) to distinguish error channels, e.g., to determine if the errors are correlated. The unifying theme is to make use of all of the information in the statistics of the data collected from syndrome measurements using machine learning and control algorithms.

quant-ph↗

arXiv2014

Quantum limits on post-selected, probabilistic quantum metrology

Probabilistic metrology attempts to improve parameter estimation by occasionally reporting an excellent estimate and the rest of the time either guessing or doing nothing at all. Here we show that probabilistic metrology can never improve quantum limits on estimation of a single parameter, both on average and asymptotically in number of trials, if performance is judged relative to mean-square estimation error. We extend the result by showing that for a finite number of trials, the probability of obtaining better estimates using probabilistic metrology, as measured by mean-square error, decreases exponentially with the number of trials. To be tight, the performance bounds we derive require that likelihood functions be approximately normal, which in turn depends on how rapidly specific distributions converge to a normal distribution with number of trials.

quant-ph↗

arXiv2014

Non-absorbing high-efficiency counter for itinerant microwave photons

Detecting an itinerant microwave photon with high efficiency is an outstanding problem in microwave photonics and its applications. We present a scheme to detect an itinerant microwave photon in a transmission line via the nonlinearity provided by a transmon in a driven microwave resonator. With a single transmon we achieve 84% distinguishability between zero and one microwave photons and 90% distinguishability with two cascaded transmons by performing continuous measurements on the output field of the resonator. We also show how the measurement diminishes coherence in the photon number basis thereby illustrating a fundamental principle of quantum measurement: the higher the measurement efficiency, the faster is the decoherence.

quant-ph↗

arXiv2014

Reply to comments on "Weak value amplification is suboptimal for estimation and detection"

Kedem's Comment [arXiv:1402.1352] on our Letter [PRL 112, 040406 (2014)] contains only the criticism that we did not consider complex weak values. We point out follow-up work which uses the same analysis as in our Letter, includes any type of weak values and draws the same conclusion. Vaidman's Comment [arXiv:1402.0199] on our Letter can be deconstructed in to two distinct logical fallacies.

quant-ph↗

arXiv2014

Weak value amplification is suboptimal for estimation and detection

We show using statistically rigorous arguments that the technique of weak value amplification (WVA) does not perform better than standard statistical techniques for the tasks of single parameter estimation and signal detection. Specifically we prove that post-selection, a necessary ingredient for WVA, decreases estimation accuracy and, moreover, arranging for anomalously large weak values is a suboptimal strategy. In doing so, we explicitly provide the optimal estimator, which in turn allows us to identify the optimal experimental arrangement to be the one in which all outcomes have equal weak values (all as small as possible) and the initial state of the meter is the maximal eigenvalue of the square of the system observable. Finally, we give precise quantitative conditions for when weak measurement (measurements without post-selection or anomalously large weak values) can mitigate the effect of uncharacterized technical noise in estimation.

quant-ph↗

arXiv2013

Quantum nondemolition detection of a propagating microwave photon

The ability to nondestructively detect the presence of a single, traveling photon has been a long-standing goal in optics, with applications in quantum information and measurement. Realising such a detector is complicated by the fact that photon-photon interactions are typically very weak. At microwave frequencies, very strong effective photon-photon interactions in a waveguide have recently been demonstrated. Here we show how this type of interaction can be used to realize a quantum nondemolition measurement of a single propagating microwave photon. The scheme we propose uses a chain of solid-state 3-level systems (transmons), cascaded through circulators which suppress photon backscattering. Our theoretical analysis shows that microwave-photon detection with fidelity around 90% can be realized with existing technologies.

quant-ph↗

arXiv2013

Quantum limits on probabilistic amplifiers

An ideal phase-preserving linear amplifier is a deterministic device that adds to an input signal the minimal amount of noise consistent with the constraints imposed by quantum mechanics. A noiseless linear amplifier takes an input coherent state to an amplified coherent state, but only works part of the time. Such a device is actually better than noiseless, since the output has less noise than the amplified noise of the input coherent state; for this reason we refer to such devices as {\em immaculate}. Here we bound the working probabilities of probabilistic and approximate immaculate amplifiers and construct theoretical models that achieve some of these bounds. Our chief conclusions are the following: (i) the working probability of any phase-insensitive immaculate amplifier is very small in the phase-plane region where the device works with high fidelity; (ii) phase-sensitive immaculate amplifiers that work only on coherent states sparsely distributed on a phase-plane circle centered at the origin can have a reasonably high working probability.

quant-ph↗

arXiv2012

Optimal rotation control for a qubit subject to continuous measurement

In this article we analyze the optimal control strategy for rotating a monitored qubit from an initial pure state to an orthogonal state in minimum time. This strategy is described for two different cost functions of interest which do not have the usual regularity properties. Hence, as classically smooth cost functions may not exist, we interpret these functions as viscosity solutions to the optimal control problem. Specifically we prove their existence and uniqueness in this weak-solution setting. In addition, we also give bounds on the time optimal control to prepare any pure state from a mixed state.

math.OC↗

arXiv2012

Breakdown of the cross-Kerr scheme for Photon Counting

We show, in the context of single photon detection, that an atomic three-level model for a transmon in a transmission line does not support the predictions of the nonlinear polarisability model known as the cross-Kerr effect. We show that the induced displacement of a probe in the presence or absence of a single photon in the signal field, cannot be resolved above the quantum noise in the probe. This strongly suggests that cross-Kerr media are not suitable for photon counting or related single photon applications. Our results are presented in the context of a transmon in a one dimensional microwave waveguide, but the conclusions also apply to optical systems.

quant-ph↗

arXiv2012

Quantum Filtering (Quantum Trajectories) for Systems Driven by Fields in Single Photon States and Superposition of Coherent States

We derive the stochastic master equations, that is to say, quantum filters, and master equations for an arbitrary quantum system probed by a continuous-mode bosonic input field in two types of non-classical states. Specifically, we consider the cases where the state of the input field is a superposition or combination of: (1) a continuous-mode single photon wave packet and vacuum, and (2) any number of continuous-mode coherent states.

quant-ph↗

arXiv2012

Quantum limits on phase-preserving linear amplifiers

The purpose of a phase-preserving linear amplifier is to make a small signal larger, regardless of its phase, so that it can be perceived by instruments incapable of resolving the original signal, while sacrificing as little as possible in signal-to-noise. Quantum mechanics limits how well this can be done: a high-gain linear amplifier must degrade the signal-to-noise; the noise added by the amplifier, when referred to the input, must be at least half a quantum at the operating frequency. This well-known quantum limit only constrains the second moments of the added noise. Here we derive the quantum constraints on the entire distribution of added noise: we show that any phase-preserving linear amplifier is equivalent to a parametric amplifier with a physical state for the ancillary mode; the noise added to the amplified field mode is distributed according to the Wigner function of the ancilla state.

quant-ph↗