arXiv subjects

Junil Choi

Publications and source records attributed to Junil Choi.

At least 91 records · Page 5Linked to original sources

arXiv2020

Beam Design for Millimeter-Wave Backhaul with Dual-Polarized Uniform Planar Arrays

This paper proposes a beamforming design for millimeter-wave (mmWave) backhaul systems with dual-polarization antennas in uniform planar arrays (UPAs). The proposed design method optimizes a beamformer to mimic an ideal beam pattern, which has flat gain across its coverage, under the dominance of the line-of-sight (LOS) component in mmWave systems. The dual-polarization antenna structure is considered as constraints of the optimization. Simulation results verify that the resulting beamformer has uniform beam pattern and high minimum gain in the covering region.

eess.SP↗

arXiv2019

Channel Estimation via Gradient Pursuit for MmWave Massive MIMO Systems with One-Bit ADCs

In millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems, one-bit analog-to-digital converters (ADCs) are employed to reduce the impractically high power consumption, which is incurred by the wide bandwidth and large arrays. In practice, the mmWave band consists of a small number of paths, thereby rendering sparse virtual channels. Then, the resulting maximum a posteriori (MAP) channel estimation problem is a sparsity-constrained optimization problem, which is NP-hard to solve. In this paper, iterative approximate MAP channel estimators for mmWave massive MIMO systems with one-bit ADCs are proposed, which are based on the gradient support pursuit (GraSP) and gradient hard thresholding pursuit (GraHTP) algorithms. The GraSP and GraHTP algorithms iteratively pursue the gradient of the objective function to approximately optimize convex objective functions with sparsity constraints, which are the generalizations of the compressive sampling matching pursuit (CoSaMP) and hard thresholding pursuit (HTP) algorithms, respectively, in compressive sensing (CS). However, the performance of the GraSP and GraHTP algorithms is not guaranteed when the objective function is ill-conditioned, which may be incurred by the highly coherent sensing matrix. In this paper, the band maximum selecting (BMS) hard thresholding technique is proposed to modify the GraSP and GraHTP algorithms, namely the BMSGraSP and BMSGraHTP algorithms, respectively. The BMSGraSP and BMSGraHTP algorithms pursue the gradient of the objective function based on the band maximum criterion instead of the naive hard thresholding. In addition, a fast Fourier transform-based (FFT-based) fast implementation is developed to reduce the complexity. The BMSGraSP and BMSGraHTP algorithms are shown to be both accurate and efficient, whose performance is verified through extensive simulations.

eess.SP↗

arXiv2019

Channel Estimation for Spatially/Temporally Correlated Massive MIMO Systems with One-Bit ADCs

This paper considers the channel estimation problem for massive multiple-input multiple-output (MIMO) systems that use one-bit analog-to-digital converters (ADCs). Previous channel estimation techniques for massive MIMO using one-bit ADCs are all based on single-shot estimation without exploiting the inherent temporal correlation in wireless channels. In this paper, we propose an adaptive channel estimation technique taking the spatial and temporal correlations into account for massive MIMO with one-bit ADCs. We first use the Bussgang decomposition to linearize the one-bit quantized received signals. Then, we adopt the Kalman filter to estimate the spatially and temporally correlated channels. Since the quantization noise is not Gaussian, we assume the effective noise as a Gaussian noise with the same statistics to apply the Kalman filtering. We also implement the truncated polynomial expansion-based low complexity channel estimator with negligible performance loss. Numerical results reveal that the proposed channel estimators can improve the estimation accuracy significantly by using the spatial and temporal correlations of channels.

cs.IT↗

arXiv2019

FCFGS-CV-Based Channel Estimation for Wideband MmWave Massive MIMO Systems with Low-Resolution ADCs

In this paper, the fully corrective forward greedy selection-cross validation-based (FCFGS-CV-based) channel estimator is proposed for wideband millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems with low-resolution analog-to-digital converters (ADCs). The sparse nature of the mmWave virtual channel in the angular and delay domains is exploited to convert the maximum a posteriori (MAP) channel estimation problem to an optimization problem with a concave objective function and sparsity constraint. The FCFGS algorithm, which is the generalized orthogonal matching pursuit (OMP) algorithm, is used to solve the sparsity-constrained optimization problem. Furthermore, the CV technique is adopted to determine the proper termination condition by detecting overfitting when the sparsity level is unknown.

eess.SP↗

arXiv2019

Gradient Pursuit-Based Channel Estimation for MmWave Massive MIMO Systems with One-Bit ADCs

In this paper, channel estimation for millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems with one-bit analog-to-digital converters (ADCs) is considered. In the mmWave band, the number of propagation paths is small, which results in sparse virtual channels. To estimate sparse virtual channels based on the maximum a posteriori (MAP) criterion, sparsity-constrained optimization comes into play. In general, optimizing objective functions with sparsity constraints is NP-hard because of their combinatorial complexity. Furthermore, the coarse quantization of one-bit ADCs makes channel estimation a challenging task. In the field of compressed sensing (CS), the gradient support pursuit (GraSP) and gradient hard thresholding pursuit (GraHTP) algorithms were proposed to approximately solve sparsity-constrained optimization problems iteratively by pursuing the gradient of the objective function via hard thresholding. The accuracy guarantee of these algorithms, however, breaks down when the objective function is ill-conditioned, which frequently occurs in the mmWave band. To prevent the breakdown of gradient pursuit-based algorithms, the band maximum selecting (BMS) technique, which is a hard thresholder selecting only the "band maxima," is applied to GraSP and GraHTP to propose the BMSGraSP and BMSGraHTP algorithms in this paper.

eess.SP↗

arXiv2019

Efficient Channel AoD/AoA Estimation Using Widebeams for Millimeter Wave MIMO Systems

Using millimeter-wave (mmWave) bands is expected to provide high data rates through large licensed and unlicensed spectrum. Due to large path loss and sparse scattering propagation properties, proper beam alignment is important in mmWave systems. Small carrier wavelengths at mmWave bands let wireless communication systems use large antenna arrays to provide sufficient beamforming gain with highly directional beams. Hence, high resolution channel angle-of-departure (AoD) and angle-of-arrival (AoA) estimation is crucial for beam alignment to get the advantages of large beamforming gain. Using large antenna arrays, however, can lead to high system complexity and channel estimation overhead. This paper proposes a channel AoD/AoA estimation technique using widebeams to lower estimation overhead and auxiliary-beam-pair (ABP) to get high resolution channel AoD/AoA estimates considering hybrid transceiver structures. To fully use the hybrid transceiver structures, the linear combination of discrete Fourier transform (DFT) vectors is considered to construct widebeams. Numerical results show that the proposed estimator can get high resolution channel AoD/AoA estimates with lower overhead compared to previous estimators.

eess.SP↗

arXiv2018

Channel Estimation for One-Bit Massive MIMO Systems Exploiting Spatio-Temporal Correlations

Massive multiple-input multiple-output (MIMO) can improve the overall system performance significantly. Massive MIMO systems, however, may require a large number of radio frequency (RF) chains that could cause high cost and power consumption issues. One of promising approaches to resolve these issues is using low-resolution analog-to-digital converters (ADCs) at base stations. Channel estimation becomes a difficult task by using low-resolution ADCs though. This paper addresses the channel estimation problem for massive MIMO systems using one-bit ADCs when the channels are spatially and temporally correlated. Based on the Bussgang decomposition, which reformulates a non-linear one-bit quantization to a statistically equivalent linear operator, the Kalman filter is used to estimate the spatially and temporally correlated channel by assuming the quantized noise follows a Gaussian distribution. Numerical results show that the proposed technique can improve the channel estimation quality significantly by properly exploiting the spatial and temporal correlations of channels.

cs.IT↗

arXiv2018

Dominant Channel Estimation via MIPS for Large-Scale Antenna Systems with One-Bit ADCs

In large-scale antenna systems, using one-bit analog-to-digital converters (ADCs) has recently become important since they offer significant reductions in both power and cost. However, in contrast to high-resolution ADCs, the coarse quantization of one-bit ADCs results in an irreversible loss of information. In the context of channel estimation, studies have been developed extensively to combat the performance loss incurred by one-bit ADCs. Furthermore, in the field of array signal processing, direction-of-arrival (DOA) estimation combined with one-bit ADCs has gained growing interests recently to minimize the estimation error. In this paper, a channel estimator is proposed for one-bit ADCs where the channels are characterized by their angular geometries, e.g., uniform linear arrays (ULAs). The goal is to estimate the dominant channel among multiple paths. The proposed channel estimator first finds the DOA estimate using the maximum inner product search (MIPS). Then, the channel fading coefficient is estimated using the concavity of the log-likelihood function. The limit inherent in one-bit ADCs is also investigated, which results from the loss of magnitude information.

cs.IT↗

arXiv2018

Advanced Quantizer Designs for FDD-Based FD-MIMO Systems Using Uniform Planar Arrays

Massive multiple-input multiple-output (MIMO) systems, which utilize a large number of antennas at the base station, are expected to enhance network throughput by enabling improved multiuser MIMO techniques. To deploy many antennas in reasonable form factors, base stations are expected to employ antenna arrays in both horizontal and vertical dimensions, which is known as full-dimension (FD) MIMO. The most popular two-dimensional array is the uniform planar array (UPA), where antennas are placed in a grid pattern. To exploit the full benefit of massive MIMO in frequency division duplexing (FDD), the downlink channel state information (CSI) should be estimated, quantized, and fed back from the receiver to the transmitter. However, it is difficult to accurately quantize the channel in a computationally efficient manner due to the high dimensionality of the massive MIMO channel. In this paper, we develop both narrowband and wideband CSI quantizers for FD-MIMO taking the properties of realistic channels and the UPA into consideration. To improve quantization quality, we focus on not only quantizing dominant radio paths in the channel, but also combining the quantized beams. We also develop a hierarchical beam search approach, which scans both vertical and horizontal domains jointly with moderate computational complexity. Numerical simulations verify that the performance of the proposed quantizers is better than that of previous CSI quantization techniques.

cs.IT↗

arXiv2018

High-Resolution Angle Tracking for Mobile Wideband Millimeter-Wave Systems with Antenna Array Calibration

Millimeter-wave (mmWave) systems use directional beams to support high-rate data communications. Small misalignment between the transmit and receive beams (e.g., due to the mobility) can result in significant drop of the received signal quality especially in line-of-sight communication channels. In this paper, we propose and evaluate high-resolution angle tracking strategies for wideband mmWave systems with mobility. We custom design pairs of auxiliary beams as the tracking beams, and use them to capture the angle variations, towards which the steering directions of the data beams are adjusted. Different from conventional beam tracking designs, the proposed framework neither depends on the angle variation model nor requires an on-grid assumption. For practical implementation of the proposed methods, we examine the impact of the array calibration errors on the auxiliary beam pair design. Numerical results reveal that by employing the proposed methods, good angle tracking performance can be achieved under various antenna array configurations, channel models, and mobility conditions.

eess.SP↗

arXiv2017

Inverse Multipath Fingerprinting for Millimeter Wave V2I Beam Alignment

Efficient beam alignment is a crucial component in millimeter wave systems with analog beamforming, especially in fast-changing vehicular settings. This paper proposes a position-aided approach where the vehicle's position (e.g., available via GPS) is used to query the multipath fingerprint database, which provides prior knowledge of potential pointing directions for reliable beam alignment. The approach is the inverse of fingerprinting localization, where the measured multipath signature is compared to the fingerprint database to retrieve the most likely position. The power loss probability is introduced as a metric to quantify misalignment accuracy and is used for optimizing candidate beam selection. Two candidate beam selection methods are developed, where one is a heuristic while the other minimizes the misalignment probability. The proposed beam alignment is evaluated using realistic channels generated from a commercial ray-tracing simulator. Using the generated channels, an extensive investigation is provided, which includes the required measurement sample size to build an effective fingerprint, the impact of measurement noise, the sensitivity to changes in traffic density, and beam alignment overhead comparison with IEEE 802.11ad as the baseline. Using the concept of beam coherence time, which is the duration between two consecutive beam alignments, and parameters of IEEE 802.11ad, the overhead is compared in the mobility context. The results show that while the proposed approach provides increasing rates with larger antenna arrays, IEEE 802.11ad has decreasing rates due to the larger beam training overhead that eats up a large portion of the beam coherence time, which becomes shorter with increasing mobility.

cs.IT↗

arXiv2017

Enhancing Secrecy with Multi-Antenna Transmission in Millimeter Wave Vehicular Communication Systems

Millimeter wave (mmWave) vehicular communication systems will provide an abundance of bandwidth for the exchange of raw sensor data and support driver-assisted and safety-related functionalities. Lack of secure communication links, however, may lead to abuses and attacks that jeopardize the efficiency of transportation systems and the physical safety of drivers. In this paper, we propose two physical layer (PHY) security techniques for vehicular mmWave communication systems. The first technique uses multiple antennas with a single RF chain to transmit information symbols to a target receiver and noise-like signals in non-receiver directions. The second technique uses multiple antennas with a few RF chains to transmit information symbols to a target receiver and opportunistically inject artificial noise in controlled directions, thereby reducing interference in vehicular environments. Theoretical and numerical results show that the proposed techniques provide higher secrecy rate when compared to traditional PHY security techniques that require digital or more complex antenna architectures.

cs.IT↗

arXiv2017

IEEE 802.11ad-based Radar: An Approach to Joint Vehicular Communication-Radar System

Millimeter-wave (mmWave) radar is widely used in vehicles for applications such as adaptive cruise control and collision avoidance. In this paper, we propose an IEEE 802.11ad-based radar for long-range radar (LRR) applications at the 60 GHz unlicensed band. We exploit the preamble of a single-carrier (SC) physical layer (PHY) frame, which consists of Golay complementary sequences with good correlation properties, as a radar waveform. This system enables a joint waveform for automotive radar and a potential mmWave vehicular communication system based on IEEE 802.11ad, allowing hardware reuse. To formulate an integrated framework of vehicle-to-vehicle (V2V) communication and LRR based on a mmWave consumer wireless local area network (WLAN) standard, we make typical assumptions for LRR applications and incorporate the full duplex radar assumption due to the possibility of sufficient isolation and self-interference cancellation. We develop single- and multi-frame radar receiver algorithms for target detection as well as range and velocity estimation within a coherent processing interval. Our proposed radar processing algorithms leverage channel estimation and time-frequency synchronization techniques used in a conventional IEEE 802.11ad receiver with minimal modifications. Analysis and simulations show that in a single target scenario, a Gbps data rate is achieved simultaneously with cm-level range accuracy and cm/s-level velocity accuracy. The target vehicle is detected with a high probability of detection ($>$99.9$\%$) at a low false alarm of 10$^{-6}$ for an equivalent isotropically radiated power (EIRP) of 43 dBm up to a vehicle separation distance of 200 m.

cs.IT↗

arXiv2017

Two-Dimensional AoD and AoA Acquisition for Wideband mmWave Systems with Cross-Polarized MIMO

In this paper, a novel two-dimensional super-resolution angle-of-departure (AoD) and angle-of-arrival (AoA) estimation technique is proposed for wideband millimeter-wave multiple-input multiple-output systems with cross-polarized antenna elements. The key ingredient of the proposed method is to form custom designed beam pairs, and devise an invertible function of the AoD/AoA to be estimated from the corresponding beam pairs. Further, a new multi-layer reference signal structure is developed for the proposed method to facilitate angle estimation for wideband channels with cross-polarized antenna elements. To facilitate feedback in closed-loop frequency division duplexing systems, a novel differential feedback strategy is proposed aiming at feedback reduction for the two-dimensional angle estimation. Numerical results demonstrate that by using the proposed method, good azimuth/elevation AoD and AoA estimation performance can be achieved under different levels of signal-to-noise ratio, channel conditions, and antenna array configurations.

cs.IT↗

arXiv2017

Common Codebook Millimeter Wave Beam Design: Designing Beams for Both Sounding and Communication with Uniform Planar Arrays

Fifth generation (5G) wireless networks are expected to utilize wide bandwidths available at millimeter wave (mmWave) frequencies for enhancing system throughput. However, the unfavorable channel conditions of mmWave links, e.g., higher path loss and attenuation due to atmospheric gases or water vapor, hinder reliable communications. To compensate for these severe losses, it is essential to have a multitude of antennas to generate sharp and strong beams for directional transmission. In this paper, we consider mmWave systems using uniform planar array (UPA) antennas, which effectively place more antennas on a two-dimensional grid. A hybrid beamforming setup is also considered to generate beams by combining a multitude of antennas using only a few radio frequency chains. We focus on designing a set of transmit beamformers generating beams adapted to the directional characteristics of mmWave links assuming a UPA and hybrid beamforming. We first define ideal beam patterns for UPA structures. Each beamformer is constructed to minimize the mean squared error from the corresponding ideal beam pattern. Simulation results verify that the proposed codebooks enhance beamforming reliability and data rate in mmWave systems.

cs.IT↗

arXiv2016

Auxiliary Beam Pair Enabled AoD and AoA Estimation in Closed-Loop Large-Scale mmWave MIMO Systems

Channel estimation is of critical importance in millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems. Due to the use of large antenna arrays, low-complexity mmWave specific channel estimation algorithms are required. In this paper, an auxiliary beam pair design is proposed to provide high-resolution estimates of the channel's angle-of-departure (AoD) and angle-of-arrival (AoA) for mmWave MIMO systems. By performing an amplitude comparison with respect to each auxiliary beam pair, a set of ratio measures that characterize the channel's AoD and AoA are obtained by the receiver. Either the best ratio measure or the estimated AoD is quantized and fed back to the transmitter via a feedback channel. The proposed technique can be incorporated into control channel design to minimize initial access delay. Though the design principles are derived assuming a high-power regime, evaluation under more realistic assumption shows that by employing the proposed method, good angle estimation performance is achieved under various signal-to-noise ratio levels and channel conditions.

cs.IT↗

arXiv2016

Achievable Uplink Rates for Massive MIMO with Coarse Quantization

The high hardware complexity of a massive MIMO base station, which requires hundreds of radio chains, makes it challenging to build commercially. One way to reduce the hardware complexity and power consumption of the receiver is to lower the resolution of the analog-to-digital converters (ADCs). We derive an achievable rate for a massive MIMO system with arbitrary quantization and use this rate to show that ADCs with as low as 3 bits can be used without significant performance loss at spectral efficiencies around 3.5 bpcu per user, also under interference from stronger transmitters and with some imperfections in the automatic gain control.

cs.IT↗

arXiv2016

Uplink Performance of Wideband Massive MIMO with One-Bit ADCs

Analog-to-digital converters (ADCs) stand for a significant part of the total power consumption in a massive MIMO base station. One-bit ADCs are one way to reduce power consumption. This paper presents an analysis of the spectral efficiency of single-carrier and OFDM transmission in massive MIMO systems that use one-bit ADCs. A closed-form achievable rate, i.e., a lower bound on capacity, is derived for a wideband system with a large number of channel taps that employs low-complexity linear channel estimation and symbol detection. Quantization results in two types of error in the symbol detection. The circularly symmetric error becomes Gaussian in massive MIMO and vanishes as the number of antennas grows. The amplitude distortion, which severely degrades the performance of OFDM, is caused by variations between symbol durations in received interference energy. As the number of channel taps grows, the amplitude distortion vanishes and OFDM has the same performance as single-carrier transmission. A main conclusion of this paper is that wideband massive MIMO systems work well with one-bit ADCs.

cs.IT↗