arXiv subjects

Junil Choi

Publications and source records attributed to Junil Choi.

105 records · Page 6Linked to original sources

arXiv2016

On the Security of Millimeter Wave Vehicular Communication Systems using Random Antenna Subsets

Millimeter wave (mmWave) vehicular communica tion systems have the potential to improve traffic efficiency and safety. Lack of secure communication links, however, may lead to a formidable set of abuses and attacks. To secure communication links, a physical layer precoding technique for mmWave vehicular communication systems is proposed in this paper. The proposed technique exploits the large dimensional antenna arrays available at mmWave systems to produce direction dependent transmission. This results in coherent transmission to the legitimate receiver and artificial noise that jams eavesdroppers with sensitive receivers. Theoretical and numerical results demonstrate the validity and effectiveness of the proposed technique and show that the proposed technique provides high secrecy throughput when compared to conventional array and switched array transmission techniques.

cs.IT↗

arXiv2016

Millimeter Wave Vehicular Communication to Support Massive Automotive Sensing

As driving becomes more automated, vehicles are being equipped with more sensors generating even higher data rates. Radars (RAdio Detection and Ranging) are used for object detection, visual cameras as virtual mirrors, and LIDARs (LIght Detection and Ranging) for generating high resolution depth associated range maps, all to enhance the safety and efficiency of driving. Connected vehicles can use wireless communication to exchange sensor data, allowing them to enlarge their sensing range and improve automated driving functions. Unfortunately, conventional technologies, such as dedicated short-range communication (DSRC) and 4G cellular communication, do not support the gigabit-per-second data rates that would be required for raw sensor data exchange between vehicles. This paper makes the case that millimeter wave (mmWave) communication is the only viable approach for high bandwidth connected vehicles. The motivations and challenges associated with using mmWave for vehicle-to-vehicle and vehicle-to-infrastructure applications are highlighted. A high-level solution to one key challenge - the overhead of mmWave beam training - is proposed. The critical feature of this solution is to leverage information derived from the sensors or DSRC as side information for the mmWave communication link configuration. Examples and simulation results show that the beam alignment overhead can be reduced by using position information obtained from DSRC.

cs.IT↗

arXiv2016

Near Maximum-Likelihood Detector and Channel Estimator for Uplink Multiuser Massive MIMO Systems with One-Bit ADCs

In massive multiple-input multiple-output (MIMO) systems, it may not be power efficient to have a high-resolution analog-to-digital converter (ADC) for each antenna element. In this paper, a near maximum likelihood (nML) detector for uplink multiuser massive MIMO systems is proposed where each antenna is connected to a pair of one-bit ADCs, i.e., one for each real and imaginary component of the baseband signal. The exhaustive search over all the possible transmitted vectors required in the original maximum likelihood (ML) detection problem is relaxed to formulate an ML estimation problem. Then, the ML estimation problem is converted into a convex optimization problem which can be efficiently solved. Using the solution, the base station can perform simple symbol-by-symbol detection for the transmitted signals from multiple users. To further improve detection performance, we also develop a two-stage nML detector that exploits the structures of both the original ML and the proposed (one-stage) nML detectors. Numerical results show that the proposed nML detectors are efficient enough to simultaneously support multiple uplink users adopting higher-order constellations, e.g., 16 quadrature amplitude modulation. Since our detectors exploit the channel state information as part of the detection, an ML channel estimation technique with one-bit ADCs that shares the same structure with our proposed nML detector is also developed. The proposed detectors and channel estimator provide a complete low power solution for the uplink of a massive MIMO system.

cs.IT↗

arXiv2015

The Impact of Beamwidth on Temporal Channel Variation in Vehicular Channels and its Implications

Millimeter wave (mmWave) has great potential in realizing high data rate thanks to the large spectral channels. It is considered as a key technology for the fifth generation wireless networks and is already used in wireless LAN (e.g., IEEE 802.11ad). Using mmWave for vehicular communications, however, is often viewed with some skepticism due to a misconception that the Doppler spread would become too large at these high frequencies. This is not true when directional beam is employed for communications. In this paper, closed form expressions relating the channel coherence time and beamwidth are derived. Unlike prior work that assumed perfect beam pointing, the pointing error due to the receiver motion is incorporated to show that there exists a non-zero optimal beamwidth that maximizes the coherence time. To investigate the mobility effect on the beam alignment which is an important feature in mmWave systems, a novel concept of beam coherence time is defined. The beam coherence time, which is an effective measure of beam alignment frequency, is shown to be much larger than the conventional channel coherence time and thus results in reduced beam alignment overhead. Using the derived correlation function, the channel coherence time, and the beam coherence time, an overall performance metric considering both the channel time-variation and the beam alignment overhead is derived. Using this metric, it is shown that beam alignment in every beam coherence time performs better than the beam alignment in every channel coherence time due to the large overhead for the latter case.

cs.IT↗

arXiv2015

Antenna Grouping based Feedback Compression for FDD-based Massive MIMO Systems

Recent works on massive multiple-input multiple-output (MIMO) have shown that a potential breakthrough in capacity gains can be achieved by deploying a very large number of antennas at the basestation. In order to achieve the performance that massive MIMO systems promise, accurate transmit-side channel state information (CSI) should be available at the basestation. While transmit-side CSI can be obtained by employing channel reciprocity in time division duplexing (TDD) systems, explicit feedback of CSI from the user terminal to the basestation is needed for frequency division duplexing (FDD) systems. In this paper, we propose an antenna grouping based feedback reduction technique for FDD-based massive MIMO systems. The proposed algorithm, dubbed antenna group beamforming (AGB), maps multiple correlated antenna elements to a single representative value using pre-designed patterns. The proposed method modifies the feedback packet by introducing the concept of a header to select a suitable group pattern and a payload to quantize the reduced dimension channel vector. Simulation results show that the proposed method achieves significant feedback overhead reduction over conventional approach performing the vector quantization of whole channel vector under the same target sum rate requirement.

cs.IT↗

arXiv2015

Millimeter-wave Gbps Broadband Evolution towards 5G: Fixed Access and Backhaul

As wireless communication evolves towards 5G, both fixed broadband and mobile broadband will play a crucial part in providing the Gbps infrastructure for a connected society. This paper proposes a Millimeter-wave Gbps Broadband (MGB) system as the solution to two critical problems in this evolution: last-mile access for fixed broadband and small cell backhaul for mobile broadband. The key idea is to use spectrum that is already available in the millimeter wave bands for fixed wireless access with optimized dynamic beamforming and massive MIMO infrastructure to achieve high capacity with wide area coverage. This paper explains the MGB concept and describes potential array architectures for realizing the system. Simulations demonstrate that with 500 MHz of bandwidth (at 39 GHz band) and 28 dBm transmission power (55 dBm EIRP), it is possible to provide more than 11 Gbps backhaul capacity for 96 small cells within 1-km radius.

cs.IT↗

arXiv2015

Adaptive Millimeter Wave Beam Alignment for Dual-Polarized MIMO Systems

Fifth generation wireless systems are expected to employ multiple antenna communication at millimeter wave (mmWave) frequencies using small cells within heterogeneous cellular networks. The high path loss of mmWave as well as physical obstructions make communication challenging. To compensate for the severe path loss, mmWave systems may employ a beam alignment algorithm that facilitates highly directional transmission by aligning the beam direction of multiple antenna arrays. This paper discusses a mmWave system employing dual-polarized antennas. First, we propose a practical soft-decision beam alignment (soft-alignment) algorithm that exploits orthogonal polarizations. By sounding the orthogonal polarizations in parallel, the equality criterion of the Welch bound for training sequences is relaxed. Second, the analog beamforming system is adapted to the directional characteristics of the mmWave link assuming a high Ricean K-factor and poor scattering environment. The soft-algorithm enables the mmWave system to align innumerable narrow beams to channel subspace in an attempt to effectively scan the mmWave channel. Thirds, we propose a method to efficiently adapt the number of channel sounding observations to the specific channel environment based on an approximate probability of beam misalignment. Simulation results show the proposed soft-alignment algorithm with adaptive sounding time effectively scans the channel subspace of a mobile user by exploiting polarization diversity.

cs.IT↗

arXiv2015

Exploiting the Preferred Domain of FDD Massive MIMO Systems with Uniform Planar Arrays

Massive multiple-input multiple-output (MIMO) systems hold the potential to be an enabling technology for 5G cellular. Uniform planar array (UPA) antenna structures are a focus of much commercial discussion because of their ability to enable a large number of antennas in a relatively small area. With UPA antenna structures, the base station can control the beam direction in both the horizontal and vertical domains simultaneously. However, channel conditions may dictate that one dimension requires higher channel state information (CSI) accuracy than the other. We propose the use of an additional one bit of feedback information sent from the user to the base station to indicate the preferred domain on top of the feedback overhead of CSI quantization in frequency division duplexing (FDD) massive MIMO systems. Combined with variable-rate CSI quantization schemes, the numerical studies show that the additional one bit of feedback can increase the quality of CSI significantly for UPA antenna structures.

cs.IT↗

arXiv2014

Channel Estimation Techniques for Quantized Distributed Reception in MIMO Systems

The Internet of Things (IoT) could enable the development of cloud multiple-input multiple-output (MIMO) systems where internet-enabled devices can work as distributed transmission/reception entities. We expect that spatial multiplexing with distributed reception using cloud MIMO would be a key factor of future wireless communication systems. In this paper, we first review practical receivers for distributed reception of spatially multiplexed transmit data where the fusion center relies on quantized received signals conveyed from geographically separated receive nodes. Using the structures of these receivers, we propose practical channel estimation techniques for the block-fading scenario. The proposed channel estimation techniques rely on very simple operations at the received nodes while achieving near-optimal channel estimation performance as the training length becomes large.

cs.IT↗

arXiv2014

Trellis-Extended Codebooks and Successive Phase Adjustment: A Path from LTE-Advanced to FDD Massive MIMO Systems

It is of great interest to develop efficient ways to acquire accurate channel state information (CSI) for frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems for backward compatibility. It is theoretically well known that the codebook size for CSI quantization should be increased as the number of transmit antennas becomes larger, and 3GPP long term evolution (LTE) and LTE-Advanced codebooks also follow this trend. Thus, in massive MIMO, it is hard to apply the conventional approach of using pre-defined vector-quantized codebooks for CSI quantization mainly because of codeword search complexity. In this paper, we propose a trellis-extended codebook (TEC) that can be easily harmonized with current wireless standards such as LTE or LTE-Advanced by extending standardized codebooks designed for 2, 4, or 8 antennas with trellis structures. TEC exploits a Viterbi decoder and convolutional encoder in channel coding as the CSI quantizer and the CSI reconstructer, respectively. By quantizing multiple channel entries simultaneously using standardized codebooks in a state transition of trellis search, TEC can achieve fractional bits per channel entry quantization to have a practical feedback overhead. Thus, TEC can solve both the complexity and the feedback overhead issues of CSI quantization in massive MIMO systems. We also develop trellis-extended successive phase adjustment (TE-SPA) which works as a differential codebook of TEC. This is similar to the dual codebook concept of LTE-Advanced. TE-SPA can reduce CSI quantization error even with lower feedback overhead in temporally correlated channels. Numerical results verify the effectiveness of the proposed schemes in FDD massive MIMO systems.

cs.IT↗

arXiv2014

Distributed Reception with Spatial Multiplexing: MIMO Systems for the Internet of Things

The Internet of things (IoT) holds much commercial potential and could facilitate distributed multiple-input multiple-output (MIMO) communication in future systems. We study a distributed reception scenario in which a transmitter equipped with multiple antennas sends multiple streams via spatial multiplexing to a large number of geographically separated single antenna receive nodes. The receive nodes then quantize their received signals and forward the quantized received signals to a receive fusion center. With global channel knowledge and forwarded quantized information from the receive nodes, the fusion center attempts to decode the transmitted symbols. We assume the transmit vector consists of phase shift keying (PSK) constellation points, and each receive node quantizes its received signal with one bit for each of the real and imaginary parts of the signal to minimize the transmission overhead between the receive nodes and the fusion center. Fusing this data is a non-trivial problem because the receive nodes cannot decode the transmitted symbols before quantization. Instead, each receive node processes a single quantity, i.e., the received signal, regardless of the number of transmitted symbols. We develop an optimal maximum likelihood (ML) receiver and a low-complexity zero-forcing (ZF)-type receiver at the fusion center. Despite its suboptimality, the ZF-type receiver is simple to implement and shows comparable performance with the ML receiver in the low signal-to-noise ratio (SNR) regime but experiences an error rate floor at high SNR. It is shown that this error floor can be overcome by increasing the number of receive nodes. Hence, the ZF-type receiver would be a practical solution for distributed reception with spatial multiplexing in the era of the IoT where we can easily have a large number of receive nodes.

cs.IT↗

arXiv2014

Bounds on Eigenvalues of a Spatial Correlation Matrix

It is critical to understand the properties of spatial correlation matrices in massive multiple-input multiple-output (MIMO) systems. We derive new bounds on the extreme eigenvalues of a spatial correlation matrix that is characterized by the exponential model in this paper. The new upper bound on the maximum eigenvalue is tighter than the previous known bound. Moreover, numerical studies show that our new lower bound on the maximum eigenvalue is close to the true maximum eigenvalue in most cases. We also derive an upper bound on the minimum eigenvalue that is also tight. These bounds can be exploited to analyze many wireless communication scenarios including uniform planar arrays, which are expected to be widely used for massive MIMO systems.

cs.IT↗

arXiv2014

Coded Distributed Diversity: A Novel Distributed Reception Technique for Wireless Communication Systems

In this paper, we consider a distributed reception scenario where a transmitter broadcasts a signal to multiple geographically separated receive nodes over fading channels, and each node forwards a few bits representing a processed version of the received signal to a fusion center. The fusion center then tries to decode the transmitted signal based on the forwarded information from the receive nodes and possible channel state information. We show that there is a strong connection between the problem of minimizing a symbol error probability at the fusion center in distributed reception and channel coding in coding theory. This connection allows us to design a unified framework for coded distributed diversity reception. We focus linear block codes such as simplex codes or first-order Reed-Muller codes that achieve the Griesmer bound with equality to maximize the diversity gain. Due to its simple structure, no complex offline optimization process is needed to design the coding structure at the receive nodes for the proposed coded diversity technique. The proposed technique can support a wide array of distributed reception scenarios, i.e., arbitrary $M$-ary symbol transmission at the transmitter and received signal processing with multiple bits at the receive nodes. Numerical studies show that the proposed coded diversity technique can achieve practical symbol error rates even with moderate signal-to-noise ratio and numbers of the receive nodes.

cs.IT↗

arXiv2014

Downlink Training Techniques for FDD Massive MIMO Systems: Open-Loop and Closed-Loop Training with Memory

The concept of deploying a large number of antennas at the base station, often called massive multiple-input multiple-output (MIMO), has drawn considerable interest because of its potential ability to revolutionize current wireless communication systems. Most literature on massive MIMO systems assumes time division duplexing (TDD), although frequency division duplexing (FDD) dominates current cellular systems. Due to the large number of transmit antennas at the base station, currently standardized approaches would require a large percentage of the precious downlink and uplink resources in FDD massive MIMO be used for training signal transmissions and channel state information (CSI) feedback. To reduce the overhead of the downlink training phase, we propose practical open-loop and closed-loop training frameworks in this paper. We assume the base station and the user share a common set of training signals in advance. In open-loop training, the base station transmits training signals in a round-robin manner, and the user successively estimates the current channel using long-term channel statistics such as temporal and spatial correlations and previous channel estimates. In closed-loop training, the user feeds back the best training signal to be sent in the future based on channel prediction and the previously received training signals. With a small amount of feedback from the user to the base station, closed-loop training offers better performance in the data communication phase, especially when the signal-to-noise ratio is low, the number of transmit antennas is large, or prior channel estimates are not accurate at the beginning of the communication setup, all of which would be mostly beneficial for massive MIMO systems.

cs.IT↗

arXiv2013

Noncoherent Trellis Coded Quantization: A Practical Limited Feedback Technique for Massive MIMO Systems

Accurate channel state information (CSI) is essential for attaining beamforming gains in single-user (SU) multiple-input multiple-output (MIMO) and multiplexing gains in multi-user (MU) MIMO wireless communication systems. State-of-the-art limited feedback schemes, which rely on pre-defined codebooks for channel quantization, are only appropriate for a small number of transmit antennas and low feedback overhead. In order to scale informed transmitter schemes to emerging massive MIMO systems with a large number of transmit antennas at the base station, one common approach is to employ time division duplexing (TDD) and to exploit the implicit feedback obtained from channel reciprocity. However, most existing cellular deployments are based on frequency division duplexing (FDD), hence it is of great interest to explore backwards compatible massive MIMO upgrades of such systems. For a fixed feedback rate per antenna, the number of codewords for quantizing the channel grows exponentially with the number of antennas, hence generating feedback based on look-up from a standard vector quantized codebook does not scale. In this paper, we propose noncoherent trellis-coded quantization (NTCQ), whose encoding complexity scales linearly with the number of antennas. The approach exploits the duality between source encoding in a Grassmannian manifold and noncoherent sequence detection. Furthermore, since noncoherent detection can be realized near-optimally using a bank of coherent detectors, we obtain a low-complexity implementation of NTCQ encoding using an off-the-shelf Viterbi algorithm applied to standard trellis coded quantization. We also develop advanced NTCQ schemes which utilize various channel properties such as temporal/spatial correlations. Simulation results show the proposed NTCQ and its extensions can achieve near-optimal performance with moderate complexity and feedback overhead.

cs.IT↗