Searcharxiv⌕ Search

arXiv subjects

Justin M. Shaw

Publications and source records attributed to Justin M. Shaw.

At least 37 records · Page 2Linked to original sources

Domain Wall Motion and Interfacial Dzyaloshinskii-Moriya Interactions in Pt/Co/Ir$(t_\mathrm{Ir})$/Ta Multilayers

The interfacial Dzyaloshinskii-Moriya interaction (DMI) is important for chiral domain walls (DWs) and for stabilizing magnetic skyrmions. We study the effects of introducing increasing thicknesses of Ir, from zero to 2 nm, into a Pt/Co/Ta multilayer between the Co and Ta. We observe a marked increase in magnetic moment, due to the suppression of the dead layer at the interface with Ta, but the perpendicular anisotropy is hardly affected. All samples show a universal scaling of the field-driven domain wall velocity across the creep and depinning regimes. Asymmetric bubble expansion shows that DWs in all of the samples have the left-handed Néel form. The value of in-plane field at which the creep velocity shows a minimum drops markedly on the introduction of Ir, as does the frequency shift of the Stokes and anti-Stokes peaks in Brillouin light scattering measurements. Despite this qualitative similarity, there are quantitative differences in the DMI strength given by the two measurements, with BLS often returning higher values. Many features in bubble expansion velocity curves do not fit simple models commonly used to date, namely a lack of symmetry about the velocity minimum and no difference in velocities at high in-plane field. These features are explained by the use of a model in which the depinning field is allowed to vary with in-plane field in a way determined from micromagnetic simulations. This theory shows that velocity minimum underestimates the DMI field, consistent with BLS returning higher values. Our results suggest that the DMI at an Ir/Co interface has the same sign as the DMI at a Pt/Co interface.

cond-mat.mes-hall↗

Magnetic domain texture and the Dzyaloshinskii-Moriya interaction in Pt/Co/IrMn and Pt/Co/FeMn thin films with perpendicular exchange bias

Antiferromagnetic materials present us with rich and exciting physics, which we can exploit to open new avenues in spintronic device applications. We explore perpendicularly magnetized exchange biased systems of Pt/Co/IrMn and Pt/Co/FeMn, where the crossover from paramagnetic to antiferromagnetic behavior in the IrMn and FeMn layers is accessed by varying the thickness. We demonstrate, through magneto-optical imaging, that the magnetic domain morphology of the ferromagnetic Co layer is influenced by the N${é}$el order of the antiferromagnet (AFM) layers. We relate these variations to the anisotropy energy of the AFM layer and the ferromagnet-antiferromagnet (FM-AFM) inter-layer exchange coupling. We also quantify the interfacial Dzyaloshinskii-Moriya interaction (DMI) in these systems by Brillouin light scattering spectroscopy. The DMI remains unchanged, within experimental uncertainty, for different phases of the AFM layers, which allows us to conclude that the DMI is largely insensitive to both AFM spin order and exchange bias. Understanding such fundamental mechanisms is crucial for the development of future devices employing chiral spin textures, such as N${é}$el domain walls and skyrmions, in FM-AFM heterostructures.

cond-mat.mes-hall↗

$\text{Co}_{25}\text{Fe}_{75}$ Thin Films with Ultralow Total Damping

We measure the dynamic properties of $\text{Co}_{25}\text{Fe}_{75}$ thin films grown by dc magnetron sputtering. Using ferromagnetic resonance spectroscopy, we demonstrate an ultralow total damping parameter in the out-of-plane configuration of < 0.0013, whereas for the in-plane configuration we find a minimum total damping of < 0.0020. In both cases, we observe low inhomogeneous linewidth broadening in macroscopic films. We observe a minimum full-width half-maximum linewidth of 1 mT at 10 GHz resonance frequency for a 12 nm thick film. We characterize the morphology and structure of these films as a function of seed layer combinations and find large variation of the qualitative behavior of the in-plane linewidth vs. resonance frequency. Finally, we use wavevector-dependent Brillouin light scattering spectroscopy to characterize the spin-wave dispersion at wave vectors up to 23 $μ\text{m}^{-1}$.

cond-mat.mtrl-sci↗

Observation of Spin-Orbit Effects with Spin Rotation Symmetry

The spin-orbit interaction enables interconversion between a charge current and a spin current. It is usually believed that in a nonmagnetic metal (NM) or at a NM/ferromagnetic metal (FM) bilayer interface, the symmetry of spin-orbit effects (SOE) requires that the spin current, charge current and spin orientation are all orthogonal to each other. Here we show the observation of a SOE near the NM/FM interface that exhibits a very different symmetry from the conventional spin Hall effect, insofar as the spin polarization is further rotated about the magnetization. These results imply that a perpendicularly polarized spin current can be generated with an in-plane charge current simply by use of a FM/NM bilayer with magnetization collinear to the charge current. The ability to generate a spin current with arbitrary polarization using typical magnetic materials will greatly benefit the development of magnetic memories.

cond-mat.mtrl-sci↗

Magnetic properties in ultra-thin 3d transition metal alloys II: Experimental verification of quantitative theories of damping and spin-pumping

A systematic experimental study of Gilbert damping is performed via ferromagnetic resonance for the disordered crystalline binary 3d transition metal alloys Ni-Co, Ni-Fe and Co-Fe over the full range of alloy compositions. After accounting for inhomogeneous linewidth broadening, the damping shows clear evidence of both interfacial damping enhancement (by spin pumping) and radiative damping. We quantify these two extrinsic contributions and thereby determine the intrinsic damping. The comparison of the intrinsic damping to multiple theoretical calculations yields good qualitative and quantitative agreement in most cases. Furthermore, the values of the damping obtained in this study are in good agreement with a wide range of published experimental and theoretical values. Additionally, we find a compositional dependence of the spin mixing conductance.

cond-mat.mtrl-sci↗

Magnetic properties of ultra-thin 3d transition-metal binary alloys I: spin and orbital moments, anisotropy, and confirmation of Slater-Pauling behavior

The structure and static magnetic properties - saturation magnetization, perpendicular anisotropy, spectroscopic g-factor, and orbital magnetization - of thin-film 3d transition metal alloys are determined over the full range of alloy compositions via X-ray diffraction, magnetometry, and ferromagnetic resonance measurements. We determine the interfacial perpendicular magnetic anisotropy by use of samples sets with varying thickness for specific alloy concentrations. The results agree with prior published data and theoretical predictions. They provide a comprehensive compilation of the magnetic properties of thin-film Ni-Co, Ni-Fe and Co-Fe alloys that goes well beyond the often-cited Slater-Pauling dependence of magnetic moment on alloy concentration.

cond-mat.mtrl-sci↗

Ultra-low magnetic damping of a metallic ferromagnet

The phenomenology of magnetic damping is of critical importance for devices that seek to exploit the electronic spin degree of freedom since damping strongly affects the energy required and speed at which a device can operate. However, theory has struggled to quantitatively predict the damping, even in common ferromagnetic materials. This presents a challenge for a broad range of applications in spintronics and spin-orbitronics that depend on materials and structures with ultra-low damping. Such systems enable many experimental investigations that further our theoretical understanding of numerous magnetic phenomena such as damping and spin-transport mediated by chirality and the Rashba effect. Despite this requirement, it is believed that achieving ultra-low damping in metallic ferromagnets is limited due to the scattering of magnons by the conduction electrons. However, we report on a binary alloy of Co and Fe that overcomes this obstacle and exhibits a damping parameter approaching 0.0001, which is comparable to values reported only for ferrimagnetic insulators. We explain this phenomenon by a unique feature of the bandstructure in this system: The density of states exhibits a sharp minimum at the Fermi level at the same alloy concentration at which the minimum in the magnetic damping is found. This discovery provides both a significant fundamental understanding of damping mechanisms as well as a test of theoretical predictions.

cond-mat.mtrl-sci↗

Radiative damping in wave guide based FMR measured via analysis of perpendicular standing spin waves in sputtered Permalloy films

The damping $α$ of the spinwave resonances in 75 nm, 120 nm, and 200nm -thick Permalloy films is measured via vector-network-analyzer ferromagnetic-resonance (VNA-FMR) in the out-of-plane geometry. Inductive coupling between the sample and the waveguide leads to an additional radiative damping term. The radiative contribution to the over-all damping is determined by measuring perpendicular standing spin waves (PSSWs) in the Permalloy films, and the results are compared to a simple analytical model. The damping of the PSSWs can be fully explained by three contributions to the damping: The intrinsic damping, the eddy-current damping, and the radiative damping. No other contributions were observed. Furthermore, a method to determine the radiative damping in FMR measurements with a single resonance is suggested.

cond-mat.mtrl-sci↗

Localization of Fe d-states in Ni-Fe-Cu alloys and implications for ultrafast demagnetization

Ni$_{80}$Fe$_{20}$ (Py) and Py-Cu exhibit intriguing ultrafast demagnetization behavior, where the Ni magnetic moment shows a delayed response relative to the Fe [S. Mathias et al., PNAS {\bf 109}, 4792 (2012)]. To unravel the mechanism responsible for this behavior, we have studied Py-Cu alloys for a wide range of Cu concentrations using X-ray magnetic circular dichroism (XMCD). The magnetic moments of Fe and Ni are found to respond very differently to Cu alloying: Fe becomes a strong ferromagnet in Py, with the magnetic moment largely unaffected by Cu alloying. In contrast, the Ni magnetic moment decreases continuously with increasing Cu concentration. Our results are corroborated by ab-initio calculations of the electronic structure, which we discuss in the framework of virtual bound states (VBSs). For high Cu concentrations, Ni exhibits VBSs below the Fermi level, which are likely responsible for an increased orbital/spin magnetic ratio at high Cu concentrations. Fe exhibits VBSs in the minority band, approximately 1 eV above the Fermi level in pure Py, that move closer to the Fermi level upon Cu alloying. A strong interaction between the VBSs and excited electrons above the Fermi level enhances the formation of localized magnons at Fe sites, which explains the different behavior between Fe and Ni during ultrafast demagnetization.

cond-mat.mtrl-sci↗

Domain structure and perpendicular magnetic anisotropy in CoFe/Pd multilayers using off-axis electron holography

Multilayers of Co90Fe10/Pd with different bilayer thicknesses, have been deposited by dc-magnetron sputtering on thermally oxidized Si wafers. Transmission electron microscopy showed that the highly textured crystalline films had columnar structure, while scanning transmission electron microscopy and atomic force microscopy respectively indicated some layer waviness and surface roughness. The magnetic domain structure and perpendicular magnetic anisotropy (PMA) of the Co90Fe10/Pd multilayers were investigated by off-axis electron holography and magnetic force microscopy. The Co90Fe10 layer thickness was the primary factor determining the magnetic domain size and the perpendicular magnetization: both decreased as the thickness increased. The strongest PMA was observed in the sample with the thinnest magnetic layer of 0.45 nm.

cond-mat.mtrl-sci↗

Spectroscopic confirmation of linear relation between Heisenberg- and interfacial Dzyaloshinskii-Moriya-exchange in polycrystalline metal films

Proposals for novel spin-orbitronic logic1 and memory devices2 are often predicated on assumptions as to how materials with large spin-orbit coupling interact with ferromagnets when in contact. Such interactions give rise to a host of novel phenomena, such as spin-orbit torques3,4 , chiral spin-structures5,6 and chiral spin-torques. These chiral properties are related to the anti-symmetric exchange, also referred to as the interfacial Dzyaloshinskii-Moriya interaction (DMI)9,10. For numerous phenomena, the relative strengths of the symmetric Heisenberg exchange and the DMI is of great importance. Here, we use optical spin-wave spectroscopy (Brillouin light scattering) to directly determine the DMI vector for a series of Ni80Fe20/Pt samples, and then compare the nearest-neighbor DMI coupling energy with the independently measured Heisenberg exchange integral. We find that the Ni80Fe20-thickness-dependencies of both the microscopic symmetric- and antisymmetric-exchange are identical, consistent with the notion that the basic mechanisms of the DMI and Heisenberg exchange essentially share the same underlying physics, as was originally proposed by Moriya11. While of significant fundamental importance, this result also leads us to a deeper understanding of DMI and how it could be optimized for spin-orbitronic applications.

cond-mat.mes-hall↗

Detection of the dc inverse spin Hall effect due to spin pumping in a novel meander-stripline geometry

The dc voltage obtained from the inverse spin Hall effect (iSHE) due to spin pumping in ferromagnet/normal-metal (NM) bilayers can be unintentionally superimposed with magnetoresistive rectification of ac charge currents in the ferromagnetic layer. We introduce a geometry in which these spurious rectification voltages vanish while the iSHE voltage is maximized. In this geometry, a quantitative study of the dc iSHE is performed in a broad frequency range for Permalloy/NM multilayers with NM={Pt, Ta, Cu/Au, Cu/Pt}. The experimentally recorded voltages can be fully ascribed to the iSHE due to spin pumping. Furthermore we measure a small iSHE voltage in single CoFe thin films.

cond-mat.mes-hall↗

Generation of phase-matched circularly-polarized extreme ultraviolet high harmonics for magnetic circular dichroism spectroscopy

Circularly-polarized extreme UV and X-ray radiation provides valuable access to the structural, electronic and magnetic properties of materials. To date, this capability was available only at large-scale X-ray facilities such as synchrotrons. Here we demonstrate the first bright, phase-matched, extreme UV circularly-polarized high harmonics and use this new light source for magnetic circular dichroism measurements at the M-shell absorption edges of Co. We show that phase matching of circularly-polarized harmonics is unique and robust, producing a photon flux comparable to the linearly polarized high harmonic sources that have been used very successfully for ultrafast element-selective magneto-optic experiments. This work thus represents a critical advance that makes possible element-specific imaging and spectroscopy of multiple elements simultaneously in magnetic and other chiral media with very high spatial and temporal resolution, using tabletop-scale setups.

physics.optics↗

Phase-sensitive detection of spin pumping via the ac inverse spin Hall effect

An intriguing feature of spintronics is the use of pure spin-currents to manipulate magnetization, e.g., spin-currents can switch magnetization in spin-torque MRAM, a next-generation DRAM alternative. Giant spin-currents via the spin Hall effect greatly expand the technological opportunities. Conversely, a ferromagnet/normal metal junction emits spin-currents under microwave excitation, i.e. spin-pumping. While such spin-currents are modulated at the excitation frequency, there is also a non-linear, rectified component that is commonly detected using the corresponding inverse spin Hall effect (iSHE) dc voltage. However, the ac component should be more conducive for quantitative analysis, as it is up to two orders of magnitude larger and linear. But any device that uses the ac iSHE is also sensitive to inductive signals via Faraday's Law and discrimination of the ac iSHE signal must rely on phase-sensitive measurements. We use the inductive signal as a reference for a quantitative measurement of the magnitude and phase of the ac iSHE.

cond-mat.mes-hall↗

Precise determination of the spectroscopic g-factor using broadband ferromagnetic resonance spectroscopy

We demonstrate that the spectroscopic g-factor can be determined with high precision and accuracy by broadband ferromagnetic resonance measurements and applying an asymptotic analysis to the data. Spectroscopic data used to determine the g-factor is always obtained over a finite range of frequencies, which can result in significant errors in the fitted values of the spectroscopic g-factor. We show that by applying an asymptotic analysis to broadband datasets, precise values of the intrinsic g-factor can be determined with errors well below 1 %, even when the exact form of the Kittel equation (which describes the relationship between the frequency and resonance field) is unknown. We demonstrate this methodology with measured data obtained for sputtered Ni80Fe20 ("Permalloy") thin films of varied thicknesses, where we determine the bulk g-factor value to be 2.109 +/- 0.003. Such an approach is further validated by application to simulated data that includes both noise and an anisotropy that is not included in the Kittel equation that was used in the analysis. Finally, we show a correlation of thickness and interface structure to the magnitude of the asymptotic behavior, which provide insight into additional mechanisms that may induce deviations from the Kittel equation.

cond-mat.mes-hall↗

Giant Secondary Grain Growth in Cu Films on Sapphire

Single crystal metal films on insulating substrates are attractive for microelectronics and other applications, but they are difficult to achieve on macroscopic length scales. The conventional approach to obtaining such films is epitaxial growth at high temperature using slow deposition in ultrahigh vacuum conditions. Here we describe a different approach: sputter deposition at modest temperatures followed by annealing to induce secondary grain growth. We show that polycrystalline as-deposited Cu on α-Al2O3(0001) can be transformed into Cu(111) with centimeter-sized grains. Employing optical microscopy, x-ray diffraction, and electron backscatter diffraction to characterize the films before and after annealing, we find a particular as-deposited grain structure that promotes the growth of giant grains upon annealing. To demonstrate one potential application of such films, we grow graphene by chemical vapor deposition on wafers of annealed Cu and obtain epitaxial graphene grains of 0.2 mm diameter.

cond-mat.mtrl-sci↗

Mode- and size-dependent Landau-Lifshitz damping in magnetic nanostructures: Evidence for non-local damping

We demonstrate a strong dependence of the effective damping on the nanomagnet size and the particular spin-wave mode that can be explained by the theory of intralayer transverse-spin-pumping. The effective Landau-Lifshitz damping is measured optically in individual, isolated nanomagnets as small as 100 nm. The measurements are accomplished by use of a novel heterodyne magneto-optical microwave microscope with unprecedented sensitivity. Experimental data reveal multiple standing spin-wave modes that we identify by use of micromagnetic modeling as having either localized or delocalized character, described generically as end- and center-modes. The damping parameter of the two modes depends on both the size of the nanomagnet as well as the particular spin-wave mode that is excited, with values that are enhanced by as much as 40% relative to that measured for an extended film. Contrary to expectations based on the ad hoc consideration of lithography-induced edge damage, the damping for the end-mode decreases as the size of the nanomagnet decreases. The data agree with the theory for damping caused by the flow of intralayer transverse spin-currents driven by the magnetization curvature. These results have serious implications for the performance of nanoscale spintronic devices such as spin-torque-transfer magnetic random access memory.

cond-mat.mes-hall↗