arXiv subjects

K. M. Rabe

Publications and source records attributed to K. M. Rabe.

At least 19 recordsLinked to original sources

arXiv2018

First-Principles Bulk-Layer Model for Dielectric and Piezoelectric Responses in Superlattices

In the first-principles bulk-layer model the superlattice structure and polarization are determined by first-principles computation of the bulk responses of the constituents to the electrical and mechanical boundary conditions in an insulating superlattice. In this work the model is extended to predict functional properties, specifically dielectric permittivity and piezoelectric response. A detailed comparison between the bulk-layer model and full first-principles calculations for three sets of perovskite oxide superlattices, PbTiO$_3$/BaTiO$_3$, BaTiO$_3$/SrTiO$_3$ and PbTiO$_3$/SrTiO$_3$, is presented. The bulk-layer model is shown to give an excellent first approximation to these important functional properties, and to allow for the identification and investigation of additional physics, including interface reconstruction and finite size effects. Technical issues in the generation of the necessary data for constituent compounds are addressed. These results form the foundation for a powerful data-driven method to facilitate discovery and design of superlattice systems with enhanced and tunable polarization, dielectric permittivity, and piezoelectric response.

cond-mat.mtrl-sci↗

arXiv2014

Strong spin-phonon coupling in infrared and Raman spectra of SrMnO3

Infrared reflectivity spectra of cubic SrMnO$_{3}$ ceramics reveal 18 % stiffening of the lowest-frequency phonon below the antiferromagnetic phase transition occurring at T$_{N}$ = 233 K. Such a large temperature change of the polar phonon frequency is extraordinary and we attribute it to an exceptionally strong spin-phonon coupling in this material. This is consistent with our prediction from first principles calculations. Moreover, polar phonons become Raman active below T$_{N}$, although their activation is forbidden by symmetry in $Pm\bar{3}m$ space group. This gives evidence that the cubic $Pm\bar{3}m$ symmetry is locally broken below T$_{N}$ due to a strong magnetoelectric coupling. Multiphonon and multimagnon scattering is also observed in Raman spectra. Microwave and THz permittivity is strongly influenced by hopping electronic conductivity, which is caused by small non-stoichiometry of the sample. Thermoelectric measurements show room-temperature concentration of free carriers $n_{e}=$3.6 10$^{20}$ cm$^{-3}$ and the sample composition Sr$^{2+}$Mn$_{0.98}^{4+}$Mn$_{0.02}^{3+}$O$_{2.99}^{2-}$. The conductivity exhibits very unusual temperature behavior: THz conductivity increases on cooling, while the static conductivity markedly decreases on cooling. We attribute this to different conductivity of the ceramic grains and grain boundaries.

cond-mat.mtrl-sci↗

arXiv2010

Multiferroic BiFeO3-BiMnO3 Nanocheckerboard From First Principles

We present a first principles study of an unusual heterostructure, an atomic-scale checkerboard of BiFeO3-BiMnO3, and compare its properties to the two bulk constituent materials, BiFeO3 and BiMnO3. The "nanocheckerboard" is found to have a multiferroic ground state with the desired properties of each constituent: polar and ferrimagnetic due to BiFeO3 and BiMnO3, respectively. The effect of B-site cation ordering on magnetic ordering in the BiFeO3-BiMnO3 system is studied. The checkerboard geometry is seen to give rise to a a novel magnetostructural effect that is neither present in the bulk constituent materials, nor in the layered BiFeO3-BiMnO3 superlattice.

cond-mat.mtrl-sci↗

arXiv2009

Magnetostructural Effect in the Multiferroic BiFeO3-BiMnO3 Checkerboard from First Principles

Using first principles calculations, we present a magnetostructural effect in the BiFeO3-BiMnO3 nanocheckerboard that is not found in either bulk parent compound or in BiFeO3-BiMnO3 superlattices. We also demonstrate that the atomic-scale checkerboard has a multiferroic ground state with the desired properties of each constitutent material: polar and ferrimagnetic due to BiFeO3 and BiMnO3 respectively.

cond-mat.mtrl-sci↗

arXiv2009

Strain-induced ferroelectricity in CaTiO$_3$ from first principles

First principles calculations are used to investigate the effects of epitaxial strain on the structure of the perovskite oxide CaTiO$_3$, with particular focus on the stabilization of a ferroelectric phase related to a polar instability hidden in the orthorhombic equilibrium bulk $Pbnm$ structure but found in previous first-principles studies of the ideal cubic perovskite high-symmetry reference structure. At 1.5% strain, we find an epitaxial orientation transition between the $ab$-$ePbnm$ phase, favored for compressive strains, and the $c$-$ePbnm$ phase. For larger tensile strains, a polar instability develops in the $c$-$ePbnm$ phase and an epitaxial-strain-induced ferroelectric phase is obtained with polarization along a $<$110$>$ direction with respect to the primitive perovskite lattice vectors of the square substrate.

cond-mat.mtrl-sci↗

arXiv2009

Broadband Dielectric Spectroscopy of Ruddlesden-Popper Sr$_{n+1}$Ti$_{n}$O$_{3n+1}$ ($n$ = 1, 2, 3) Thin Films

We explore the frequency-dependent relative permittivity of Ruddlesden-Popper series Sr(n+1)Ti(n)O(3n+1) (n =1,2,3) thin films as a function of temperature and dc electric field. Interdigitated capacitors and coplanar waveguides were used to extract the frequency response from 500 Hz to 40 GHz. At room temperature, the in-plane relative permittivities obtained for Sr(n+1)Ti(n)O(3n+1) (n =1,2,3) were 42+/-3, 54+/-3, and 77+/-2, respectively, and were independent of frequency. At low temperatures, permittivity increases and electric field tunability develops in Sr(4)Ti(3)O(10).

cond-mat.mtrl-sci↗

arXiv2007

Modelling Thickness-Dependence of Ferroelectric Thin Film Properties

We present a segregrated strain model that describes the thickness-dependent dielectric properties of ferroelectric films. Using a phenomenological Landau approach, we present results for two specific materials, making comparison with experiment and with first-principles calculations whenever possible. We also suggest a "smoking gun" benchtop probe to test our elastic scenario.

cond-mat.mtrl-sci↗

arXiv2006

Fcc breathing instability in BaBiO_3 from first principles

We present first-principles density-functional calculations using the local density approximation to investigate the structural instability of cubic perovskite BaBiO_3. This material might exhibit charge disproportionation and some evidence thereof has been linked to the appearance of an additional, fourth peak in the experimental IR spectrum. However, our results suggest that the origin of this additional peak can be understood within the picture of a simple structural instability. While the true instability consists of an oxygen-octahedra breathing distortion and a small octahedra rotation, we find that the breathing alone in a fcc-type cell doubling is sufficient to explain the fourth peak in the IR spectrum. Our results show that the oscillator strength of this particular mode is of the same order of magnitude as the other three modes, in agreement with experiment.

cond-mat.other↗

arXiv2005

Epitaxial Growth of Multiferroic YMnO3 on GaN

In this work, we report on the epitaxial growth of multiferroic YMnO3 on GaN. Both materials are hexagonal with a nominal lattice mismatch of 4%, yet x-ray diffraction reveals an unexpected 30 degree rotation between the unit cells of YMnO3 and GaN that results in a much larger lattice mismatch (10%) compared to the unrotated case. Estimates based on first principles calculations show that the bonding energy gained from the rotated atomic arrangement compensates for the increase in strain energy due to the larger lattice mismatch. Understanding the energy competition between chemical bonding energy and strain energy provides insight into the heteroepitaxial growth mechanisms of complex oxide-semiconductor systems.

cond-mat.mtrl-sci↗

arXiv2005

Anomalous vibrational effects in non-magnetic and magnetic Heusler alloys

First-principles calculations are used in order to investigate phonon anomalies in non-magnetic and magnetic Heusler alloys. Phonon dispersions for several systems in their cubic L2$\mathrm{_1}$ structure were obtained along the [110] direction. We consider compounds which exhibit phonon instabilities and compare them with their stable counterparts. The analysis of the electronic structure allows us to identify the characteristic features leading to structural instabilities. The phonon dispersions of the unstable compounds show that, while the acoustic modes tend to soften, the optical modes disperse in a way which is significantly different from that of the stable structures. The optical modes that appear to disperse at anomalously low frequencies are Raman active, which is considered an indication of a stronger polarizability of the unstable systems. We show that phonon instability of the TA$_{2}$ mode in Heusler alloys is driven by interaction(repulsion) with the low energy optical vibrations. The optical modes show their unusual behavior due to covalent interactions which are additional bonding features incommensurate with the dominating metallicity in Heusler compounds.

cond-mat.mtrl-sci↗

arXiv2005

Unusual behaviour of the ferroelectric polarization in PbTiO$_{3}$/SrTiO$_{3}$ superlattices

Artificial PbTiO$_{3}$/SrTiO$_{3}$ superlattices were constructed using off-axis RF magnetron sputtering. X-ray diffraction and piezoelectric atomic force microscopy were used to study the evolution of the ferroelectric polarization as the ratio of PbTiO$_{3}$ to SrTiO$_{3}$ was changed. For PbTiO$_{3}$ layer thicknesses larger than the 3-unit cells SrTiO$_{3}$ thickness used in the structure, the polarization is found to be reduced as the PbTiO$_{3}$ thickness is decreased. This observation confirms the primary role of the depolarization field in the polarization reduction in thin films. For the samples with ratios of PbTiO$_{3}$ to SrTiO$_{3}$ of less than one a surprising recovery of ferroelectricity that cannot be explained by electrostatic considerations was observed.

cond-mat.mtrl-sci↗

arXiv2005

Polarization enhancement in two- and three-component ferroelectric superlattices

Composition-dependent structural and polar properties of epitaxial short-period CaTiO_3/SrTiO_3/BaTiO_3 superlattices grown on a SrTiO_3 substrate are investigated with first-principles density-functional theory computational techniques. Polarization enhancement with respect to bulk tetragonal BaTiO_3 is found for two- and three-component superlattices with a BaTiO_3 concentration of more than 30%. Individual BaTiO_3 layer thickness is identified as an important factor governing the polarization improvement. In addition, the degree of inversion-symmetry breaking in three-component superlattices can be controlled by varying the thicknesses of the component layers. The flexibility allowed within this large family of structures makes them highly suitable for various applications in modern nano-electro-mechanical devices.

cond-mat.mtrl-sci↗

arXiv2005

Physics of thin-film ferroelectric oxides

This review covers the important advances in recent years in the physics of thin film ferroelectric oxides, the strongest emphasis being on those aspects particular to ferroelectrics in thin film form. We introduce the current state of development in the application of ferroelectric thin films for electronic devices and discuss the physics relevant for the performance and failure of these devices. Following this we cover the enormous progress that has been made in the first principles computational approach to understanding ferroelectrics. We then discuss in detail the important role that strain plays in determining the properties of epitaxial thin ferroelectric films. Finally, we look at the emerging possibilities for nanoscale ferroelectrics, with particular emphasis on ferroelectrics in non conventional nanoscale geometries.

cond-mat.mtrl-sci↗

arXiv2004

Coexistence of antiferrodistortive and ferroelectric distortions at the PbTiO$_3$ (001) surface

The c(2$\times$2) reconstruction of (001) PbTiO$_3$ surfaces is studied by means of first principles calculations for paraelectric (non-polar) and ferroelectric ([001] polarized) films. Analysis of the atomic displacements in the near-surface region shows how the surface modifies the antiferrodistortive (AFD) instability and its interaction with ferroelectric (FE) distortions. The effect of the surface is found to be termination dependent. The AFD instability is suppressed at the TiO$_2$ termination while it is strongly enhanced, relative to the bulk, at the PbO termination resulting in a c(2x2) surface reconstruction which is in excellent agreement with experiments. We find that, in contrast to bulk PbTiO$_3$, in-plane ferroelectricity at the PbO termination does not suppress the AFD instability. The AFD and the in-plane FE distortions are instead concurrently enhanced at the PbO termination. This leads to a novel surface phase with coexisting FE and AFD distortions which is not found in PbTiO$_3$ bulk.

cond-mat.mtrl-sci↗

arXiv2004

First-principles study of spontaneous polarization in multiferroic BiFeO$_3$

The ground-state structural and electronic properties of ferroelectric BiFeO$_3$ are calculated using density functional theory within the local spin-density approximation and the LSDA+U method. The crystal structure is computed to be rhombohedral with space group $R3c$, and the electronic structure is found to be insulating and antiferromagnetic, both in excellent agreement with available experiments. A large ferroelectric polarization of 90-100 $μ$C/cm$^2$ is predicted, consistent with the large atomic displacements in the ferroelectric phase and with recent experimental reports, but differing by an order of magnitude from early experiments. One possible explanation is that the latter may have suffered from large leakage currents. However both past and contemporary measurements are shown to be consistent with the modern theory of polarization, suggesting that the range of reported polarizations may instead correspond to distinct switching paths in structural space. Modern measurements on well-characterized bulk samples are required to confirm this interpretation.

cond-mat.mtrl-sci↗

arXiv2003

Epitaxially strained [001]-(PbTiO$_3$)$_1$(PbZrO$_3$)$_1$ superlattice and PbTiO$_3$ from first principles

The effect of layer-by-layer heterostructuring and epitaxial strain on lattice instabilities and related ferroelectric properties is investigated from first principles for the [001]-(PbTiO$_3$)$_1$(PbZrO$_3$)$_1$ superlattice and pure PbTiO$_3$ on a cubic substrate. The results for the superlattice show an enhancement of the stability of the monoclinic r-phase with respect to pure PbTiO$_3$. Analysis of the lattice instabilities of the relaxed centrosymmetric reference structure computed within density functional perturbation theory suggests that this results from the presence of two unstable zone-center modes, one confined in the PbTiO$_3$ layer and one in the PbZrO$_3$ layer, which produce in-plane and normal components of the polarization, respectively. The zero-temperature dielectric response is computed and shown to be enhanced not only near the phase boundaries, but throughout the r-phase. Analysis of the analogous calculation for pure PbTiO$_3$ is consistent with this interpretation, and suggests useful approaches to engineering the dielectric properties of artificially structured perovskite oxides.

cond-mat.mtrl-sci↗

arXiv2003

First-principles study of lattice instabilities in the ferromagnetic martensite Ni$_2$MnGa

The phonon dispersion relations and elastic constants for ferromagnetic Ni$_2$MnGa in the cubic and tetragonally distorted Heusler structures are computed using density-functional and density-functional perturbation theory within the spin-polarized generalized-gradient approximation. For $0.9<c/a<1.06$, the TA$_2$ tranverse acoustic branch along $[110]$ and symmetry-related directions displays a dynamical instability at a wavevector that depends on $c/a$. Through examination of the Fermi-surface nesting and electron-phonon coupling, this is identified as a Kohn anomaly. In the parent cubic phase the computed tetragonal shear elastic constant, C$^\prime$=(C$_{11}-$C$_{12}$)/2, is close to zero, indicating a marginal elastic instability towards a uniform tetragonal distortion. We conclude that the cubic Heusler structure is unstable against a family of energy-lowering distortions produced by the coupling between a uniform tetragonal distortion and the corresponding $[110]$ modulation. The computed relation between the $c/a$ ratio and the modulation wavevector is in excellent agreement with structural data on the premartensitic ($c/a$ = 1) and martensitic ($c/a$ = 0.94) phases of Ni$_2$MnGa.

cond-mat.mtrl-sci↗

arXiv2002

Theory of polarization enhancement in epitaxial BaTiO$_3$/SrTiO$_3$ superlattices

The spontaneous polarization of epitaxial BaTiO$_3$/SrTiO$_3$ superlattices is studied as a function of composition using first-principles density functional theory within the local density approximation. With the in-plane lattice parameter fixed to that of bulk SrTiO$_3$, the computed superlattice polarization is enhanced above that of bulk BaTiO$_3$ for superlattices with BaTiO$_3$ fraction larger than 40%. In contrast to their bulk paraelectric character, the SrTiO$_3$ layers are found to be {\it tetragonal and polar}, possessing nearly the same polarization as the BaTiO$_3$ layers. General electrostatic arguments elucidate the origin of the polarization in the SrTiO$_3$ layers, with important implications for other ferroelectric nanostructures.

cond-mat.mtrl-sci↗