arXiv subjects
Publications and source records attributed to K. S. Novoselov.
We have measured the quantum Hall activation gaps in bilayer graphene at filling factors $ν=\pm4$ and $ν=\pm8$ in high magnetic fields up to 30 T. We find that energy levels can be described by a 4-band relativistic hyperbolic dispersion. The Landau level width is found to contain a field independent background due to an intrinsic level broadening and a component which increases linearly with magnetic field.
We report a stoichiometric derivative of graphene with a fluorine atom attached to each carbon. Raman, optical, structural, micromechanical and transport studies show that the material is qualitatively different from the known graphene-based nonstoichiometric derivatives. Fluorographene is a high-quality insulator (resistivity >10^12 Ohm per square) with an optical gap of 3 eV. It inherits the mechanical strength of graphene, exhibiting Young's modulus of 100 N/m and sustaining strains of 15%. Fluorographene is inert and stable up to 400C even in air, similar to Teflon.
We describe the identification of single- and few- layer boron nitride. Its optical contrast is much smaller than that of graphene but even monolayers are discernable by optimizing viewing conditions. Raman spectroscopy can be used to confirm BN monolayers. They exhibit an upshift in the fundamental Raman mode by up to 4 cm-1. The number of layers in thicker crystals can be counted by exploiting an integer-step increase in the Raman intensity and optical contrast.
The temperature dependence of the mobility in suspended graphene samples is investigated. In clean samples, flexural phonons become the leading scattering mechanism at temperature $T \gtrsim 10\,\,$K, and the resistivity increases quadratically with $T$. Flexural phonons limit the intrinsic mobility down to a few $\text{m}^2/\text{Vs}$ at room $T$. Their effect can be eliminated by applying strain or placing graphene on a substrate.
Graphene is considered to be a promising material for future electronics. The envisaged transistor applications often rely on precision cutting of graphene sheets with nanometer accuracy. In this letter we demonstrate graphene-based quantum dots created by using atomic force microscopy (AFM) with tip-assisted electrochemical etching. This lithography technique provides resolution of about 20 nm, which can probably be further improved by employing sharper tips and better humidity control. The behavior of our smallest dots in magnetic field has allowed us to identify the charge neutrality point and distinguish the states with one electron, no charge and one hole left inside the quantum dot.
Graphene is one of the stiffest known materials, with a Young's modulus of 1 TPa, making it an ideal candidate for use as a reinforcement in high-performance composites. However, being a one-atom thick crystalline material, graphene poses several fundamental questions: (1) can decades of research on carbon-based composites be applied to such an ultimately-thin crystalline material? (2) is continuum mechanics used traditionally with composites still valid at the atomic level? (3) how does the matrix interact with the graphene crystals and what kind of theoretical description is appropriate? We have demonstrated unambiguously that stress transfer takes place from the polymer matrix to monolayer graphene, showing that the graphene acts as a reinforcing phase. We have also modeled the behavior using shear-lag theory, showing that graphene monolayer nanocomposites can be analyzed using continuum mechanics. Additionally, we have been able to monitor stress transfer efficiency and breakdown of the graphene/polymer interface.
We report capacitors in which a finite electronic compressibility of graphene dominates the electrostatics, resulting in pronounced changes in capacitance as a function of magnetic field and carrier concentration. The capacitance measurements have allowed us to accurately map the density of states D, and compare it against theoretical predictions. Landau oscillations in D are robust and zero Landau level (LL) can easily be seen at room temperature in moderate fields. The broadening of LLs is strongly affected by charge inhomogeneity that leads to zero LL being broader than other levels.
Surface enhanced Raman scattering (SERS) exploits surface plasmons induced by the incident field in metallic nanostructures to significantly increase the Raman intensity. Graphene provides the ideal prototype two dimensional (2d) test material to investigate SERS. Its Raman spectrum is well known, graphene samples are entirely reproducible, height controllable down to the atomic scale, and can be made virtually defect-free. We report SERS from graphene, by depositing arrays of Au particles of well defined dimensions on graphene/SiO$_2$(300nm)/Si. We detect significant enhancements at 633nm. To elucidate the physics of SERS, we develop a quantitative analytical and numerical theory. The 2d nature of graphene allows for a closed-form description of the Raman enhancement. This scales with the nanoparticle cross section, the fourth power of the Mie enhancement, and is inversely proportional to the tenth power of the separation between graphene and the nanoparticle. One consequence is that metallic nanodisks are an ideal embodiment for SERS in 2d.
We study, within the tight-binding approximation, the electronic properties of a graphene bilayer in the presence of an external electric field applied perpendicular to the system -- \emph{biased bilayer}. The effect of the perpendicular electric field is included through a parallel plate capacitor model, with screening correction at the Hartree level. The full tight-binding description is compared with its 4-band and 2-band continuum approximations, and the 4-band model is shown to be always a suitable approximation for the conditions realized in experiments. The model is applied to real biased bilayer devices, either made out of SiC or exfoliated graphene, and good agreement with experimental results is found, indicating that the model is capturing the key ingredients, and that a finite gap is effectively being controlled externally. Analysis of experimental results regarding the electrical noise and cyclotron resonance further suggests that the model can be seen as a good starting point to understand the electronic properties of graphene bilayer. Also, we study the effect of electron-hole asymmetry terms, as the second-nearest-neighbor hopping energies $t'$ (in-plane) and $γ_{4}$ (inter-layer), and the on-site energy $Δ$.
We demonstrate that optical transparency of any two-dimensional system with a symmetric electronic spectrum is governed by the fine structure constant and suggest a simple formula that relates a quasi-particle spectrum to an optical absorption of such a system. These results are applied to graphene deposited on a surface of oxidized silicon for which we measure ellipsometric spectra, extract optical constants of a graphene layer and reconstruct the electronic dispersion relation near the K point using optical transmission spectra. We also present spectroscopic ellipsometry analysis of graphene placed on amorphous quartz substrates and report a pronounced peak in ultraviolet absorption at 4.6 eV because of a van Hove singularity in graphene's density of states. The peak is downshifted by 0.5 eV probably due to excitonic effects.
We show that graphene deposited on a substrate has a non-negligible density of atomic scale defects. This is evidenced by a previously unnoticed D peak in the Raman spectra with intensity of about 1% with respect to the G peak. We evaluated the effect of such impurities on electron transport by mimicking them with hydrogen adsorbates and measuring the induced changes in both mobility and Raman intensity. If the intervalley scatterers responsible for the D peak are monovalent, their concentration is sufficient to account for the limited mobilities achievable in graphene on a substrate.
We analyze the mechanical deformations that are required to create uniform pseudomagnetic fields in graphene. It is shown that, if a ribbon is bent in-plane into a circular arc, this can lead to fields exceeding 10T, which is sufficient for the observation of pseudo-Landau quantization. The arc geometry is simpler than those suggested previously and, in our opinion, has much better chances to be realized experimentally soon. The effects of a scalar potential induced by dilatation in this geometry is shown to be negligible.
We show that strong photoluminescence (PL) can be induced in single-layer graphene on using an oxygen plasma treatment. PL characteristics are spatially uniform across the flakes and connected to elastic scattering spectra distinctly different from those of gapless pristine graphene. Oxygen plasma can be used to selectively convert the topmost layer when multi-layer samples are treated
We observe a giant increase of the infrared intensity and a softening of the in-plane antisymmetric phonon mode Eu (~0.2 eV) in bilayer graphene as a function of the gate-induced doping. The phonon peak has a pronounced Fano-like asymmetry. We suggest that the intensity growth and the softening originate from the coupling of the phonon mode to the narrow electronic transition between parallel bands of the same character, while the asymmetry is due to the interaction with the continuum of transitions between the lowest hole and electron bands. The growth of the peak is a manifestation of the "charged-phonon" effect observed previously in organic chain conductors and doped fullerenes, which can now be tuned with the gate voltage.
We present a compelling evidence for the opening of a bandgap in exfoliated bottom-gated bilayer graphene by fitting the gate-voltage modulated infrared reflectivity spectra in a large range of doping levels with a tight-binding model and the Kubo formula. A close quantitative agreement between the experimental and calculated spectra is achieved, allowing us to determine self-consistently the full set of Slonczewski-Weiss-McClure tight-binding parameters together with the gate-voltage dependent bandgap. The doping dependence of the bandgap shows a good agreement with the existing calculations that take the effects of self-screening into account. We also identify certain mismatches between the tight-binding model and the data, which can be related to electron-electron and electron-phonon interactions.
The temperature dependence of the magneto-conductivity in graphene shows that the widths of the longitudinal conductivity peaks, for the N=1 Landau level of electrons and holes, display a power-law behavior following $Δν\propto T^κ$ with a scaling exponent $κ= 0.37\pm0.05$. Similarly the maximum derivative of the quantum Hall plateau transitions $(dσ_{xy}/dν)^{max}$ scales as $T^{-κ}$ with a scaling exponent $κ= 0.41\pm0.04$ for both the first and second electron and hole Landau level. These results confirm the universality of a critical scaling exponent. In the zeroth Landau level, however, the width and derivative are essentially temperature independent, which we explain by a temperature independent intrinsic length that obscures the expected universal scaling behavior of the zeroth Landau level.
There is an increasing amount of literature concerning electronic properties of graphene close to the neutrality point. Many experiments continue using the two-probe geometry or invasive contacts or do not control samples' macroscopic homogeneity. We believe that it is helpful to point out some problems related to such measurements. By using experimental examples, we illustrate that the charge inhomogeneity induced by spurious chemical doping or metal contacts can lead to large systematic errors in assessing graphene's transport properties and, in particular, its minimal conductivity. The problems are most severe in the case of two-probe measurements where the contact resistance is found to strongly vary as a function of gate voltage.
It is widely assumed that the dominant source of scattering in graphene is charged impurities in a substrate. We have tested this conjecture by studying graphene placed on various substrates and in high-k media. Unexpectedly, we have found no significant changes in carrier mobility either for different substrates or by using glycerol, ethanol and water as a top dielectric layer. This suggests that Coulomb impurities are not the scattering mechanism that limits the mean free path currently attainable for graphene on a substrate.