arXiv subjects

Karl Jakobs

Publications and source records attributed to Karl Jakobs.

10 recordsLinked to original sources

arXiv2026

Fast Timing and TCT Measurement Results of CNM Double-Sided 3D Sensors

Sensors with fast timing capabilities (on the order of tens of picoseconds) are a critical component of future HEP tracking detectors, providing the ability to disentangle high multiplicity events. Silicon 3D sensors are capable of delivering this temporal resolution and additionally display an excellent radiation hardness, suitable for the harsh environments expected in future hadron colliders (e.g. FCC-hh). In the course of the RD50 project "3D detectors optimized for timing applications", double-sided 3D sensors with two different column layouts, hexagonal and orthogonal, and different column counts were designed and produced by CNM. In this study, results of IV, top-TCT and source timing measurements of unirradiated as well as proton irradiated sensor structures are presented. The IV characterisation shows a strong decrease of the overall high leakage current of the sensors after irradiation. Top-TCT measurements with both an infrared and red laser reveal a mostly homogenous charge collection in the sensor bulk, while higher signals are observed in the outermost columns for surface charge injection. The time resolution of sensors irradiated up to a $1 \, \mathrm{MeV}$ neutron equivalent fluence of $3\times10^{15} \, \mathrm{cm^{-2}}$ reaches down to ca. $65\,\mathrm{ps}$, showing only a slight degradation compared to unirradiated sensors.

physics.ins-det↗

arXiv2026

Particle Physics and Gravitational Waves as complementary windows on the Universe

Particle physics and gravitational waves provide complementary probes of the deep structure of the Universe. Gravitational waves from the mergers of neutron stars and black holes are sensitive to the structure of dense quark matter and to different dark matter scenarios. Measurements of stochastic gravitational waves backgrounds can teach us about possible first order phase transitions in the early Universe, including providing sensitivity to the TeV scale which is of key interest to future particle collider experiments. Gravitational waves measurements will also give new probes of the evolution and expansion of the Universe, complementary to measurements with electromagnetic radiation. This Perspectives article explores the physics synergies between the science opportunities provided by next generation gravitational waves measurements and particle physics experiments. Gravitational waves can also probe deep into the early Universe reaching physics much above possible collider energies if the signals can be detected.

astro-ph.CO↗

arXiv2026

Characterization of Passive CMOS Strip Detectors After Proton Irradiation

Strip detectors are populating outer trackers of high-energy particle experiments. They are convenient for covering large areas of sensitive material since they use less power and have fewer readout channels compared to pixels sensors. Nevertheless, they are typically manufactured with a mask set that covers the full wafer, otherwise when using smaller reticles the strip implants have to be stitched. For this project, strip detectors were fabricated in a CMOS commercial foundry using different reticles to be stitched several times, proving the feasibility of this technology. LFoundry produced the passive CMOS strip detector with a production line of 150 nm node technology, using a 150 um thick FZ wafer. Those strip sensors have three different geometries to study different impacts of the CMOS technology. The strips have lengths of 2.1 cm and 4.1 cm, stitching 3 or 5 reticles respectively. This work shows results of 24 GeV proton irradiated passive CMOS strip detectors. The detectors were irradiated at CERN and were tested with different set-ups, not showing any effect from the strips stitching. Proving that this technology is feasible for detecting high-energy particles opens the door to future large productions of passive strip detectors and also to produce active strip sensors in commercial CMOS foundries.

physics.ins-det↗

arXiv2024

TCAD Simulation of Stitching for Passive CMOS Strip Detectors

Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and they can take advantage of the silicon electronics foundries developments and production lines. Strip detectors are very useful to cover large areas for tracking purposes, while consuming less power per area compared to pixel sensors. The majority of particle physics experiments use conventional silicon strip detectors fabricated in foundries that do not use stitching, relying on a very small number of foundries worldwide that can provide large amounts of strip detectors. Fabricating strip detectors in a CMOS foundry opens the possibility to use more foundries and to include active elements in the strips for future productions. For the passive CMOS strip detectors project we fabricated strip detectors in a CMOS foundry using two 1 cm2 reticles that are stitched together along the wafer. The fabricated strips stitched the reticles three and five times, and it was shown that the performance of those strips is not affected by the stitching. This paper shows 3D TCAD simulations of the stitching area to investigate the possible effects stitching can have on the performance of the strip detectors, considering different stitching mismatches. We will show that the mismatch of stitched structures up to 1 um does not impact the performance with TCAD simulations which agrees with the results obtained from the measurements.

physics.ins-det↗

arXiv2024

Characterisation and simulation of stitched CMOS strip sensors

In high-energy physics, there is a need to investigate alternative silicon sensor concepts that offer cost-efficient, large-area coverage. Sensors based on CMOS imaging technology present such a silicon sensor concept for tracking detectors. The CMOS Strips project investigates passive CMOS strip sensors fabricated by LFoundry in a 150nm technology. By employing the technique of stitching, two different strip sensor formats have been realised. The sensor performance is characterised based on measurements at the DESY II Test Beam Facility. The sensor response was simulated utilising Monte Carlo methods and electric fields provided by TCAD device simulations. This study shows that employing the stitching technique does not affect the hit detection efficiency. A first look at the electric field within the sensor and its impact on generated charge carriers is being discussed.

physics.ins-det↗

arXiv2024

Focus topics for the ECFA study on Higgs / Top / EW factories

In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.

hep-ph↗

arXiv2023

The profile of the Higgs boson -- status and prospects

The Higgs boson, which was discovered at CERN in 2012, stands out as a remarkable elementary particle with distinct characteristics. Unlike any other observed particle, it possesses zero spin within the Standard Model (SM) of particle physics. Theoretical predictions had anticipated the existence of this scalar boson, postulating its interaction with the $W$ and $Z$ bosons as well as through Yukawa interactions with fermions. Furthermore the Higgs boson can interact with itself, commonly referred to as the Higgs self-interaction. In this review, the current state of experimental and theoretical investigations of Higgs boson production at the LHC and the ongoing efforts to unravel its properties are described, and an up-to-date assessment of our understanding of the Higgs sector of the SM is provided. In addition, potential links between the Higgs boson and significant unresolved questions within the realm of particle physics are presented.

hep-ph↗

arXiv2022

50 Years of Quantum Chromodynamics

This paper presents a comprehensive review of both the theory and experimental successes of Quantum Chromodynamics, starting with its emergence as a well defined theory in 1972-73 and following developments and results up to the present day. Topics include a review of the earliest theoretical and experimental foundations; the fundamental constants of QCD; an introductory discussion of lattice QCD, the only known method for obtaining exact predictions from QCD; methods for approximating QCD, with special focus on effective field theories; QCD under extreme conditions; measurements and predictions of meson and baryon states; a special discussion of the structure of the nucleon; techniques for study of QCD at high energy, including treatment of jets and showers; measurements at colliders; weak decays and quark mixing; and a section on the future, which discusses new experimental facilities or upgrades currently funded. The paper is intended to provide a broad background for Ph.D. students and postdocs starting their career. Some contributions include personal accounts of how the ideas or experiments were developed.

hep-ph↗

arXiv2022

Characterization of Passive CMOS Strip Sensors

Recent advances in CMOS imaging sensor technology , e.g. in CMOS pixel sensors, have proven that the CMOS process is radiation tolerant enough to cope with certain radiation levels required for tracking layers in hadron collider experiments. With the ever-increasing area covered by silicon tracking detectors cost effective alternatives to the current silicon sensors and more integrated designs are desirable. This article describes results obtained from laboratory measurements of silicon strip sensors produced in a passive p-CMOS process. Electrical characterization and charge collection measurements with a 90Sr source and a laser with infrared wavelength showed no effect of the stitching process on the performance of the sensor.

physics.ins-det↗

arXiv2012

Physics at the LHC -- From Standard Model measurements to Searches for New Physics

The successful operation of the {\em Large Hadron Collider} (LHC) during the past two years allowed to explore particle interaction in a new energy regime. Measurements of important Standard Model processes like the production of high-\pt\ jets, $W$ and $Z$ bosons and top and $b$-quarks were performed by the LHC experiments. In addition, the high collision energy allowed to search for new particles in so far unexplored mass regions. Important constraints on the existence of new particles predicted in many models of physics beyond the Standard Model could be established. With integrated luminosities reaching values around 5 \ifb\ in 2011, the experiments reached as well sensitivity to probe the existence of the Standard Model Higgs boson over a large mass range. In the present report the major physics results obtained by the two general-purpose experiments ATLAS and CMS are summarized.

hep-ex↗