arXiv subjects

Karl K. Berggren

Publications and source records attributed to Karl K. Berggren.

At least 19 recordsLinked to original sources

arXiv2026

Compact Circuit Models for Nanoantenna-Based Lightwave Electronics

As the field of nanoscale lightwave electronics matures from centering around fundamental science to focusing on device engineering, there is a growing need for compact models that can provide rapid and scalable quantitative analysis of the performance of petahertz-frequency optical-field-driven electronics. In this work, we developed a circuit model framework for describing nano-scale lightwave electronics. Our framework captures the physics governing nanoscale optical devices, such as electrically-connected nanoantennas, using compact circuit models that predict their electromagnetic response, their electron emission, and their charge transfer dynamics. This approach allows scalable simulation of large integrated systems containing networks of nanoscale lightwave electronic components, which is not possible using full-wave electromagnetic and particle-in-cell simulation methods. We implemented the compact model in an free commercial circuit solver (LTspice) and validated its electromagnetic response against a full-wave electromagnetic solver (MEEP). We propose an experiment to fully benchmark the model's ability to capture non-linear charge-transfer-based coupling between devices. The circuit model implementation speeds up the electromagnetic analysis from hours to seconds and accounts for charge-driven coupling, enabling rapid quantitative studies of device operation which provide new insights into how femtosecond signals propagate through nanoscale lightwave electronic structures. We anticipate that the methods we introduce here will become essential to the development and performance analysis of nanoscale lightwave electronics for communication, computation, and signal processing at optical frequencies.

physics.optics↗

arXiv2026

Dark Matter Haloscope with a Disordered Dielectric Absorber

Light dark matter candidates such as axions and dark photons generically couple to electromagnetism, yielding dark-matter-to-photon conversion as a key search strategy. In addition to resonant conversion in cavities and circuits, light dark matter bosons efficiently convert to photons on material interfaces, with a broadband power proportional to the total area of these interfaces. In this work, we make use of interface conversion to develop a new experimental dark matter detector design: the disordered dielectric detector. We show that a volume filled with dielectric powder is an efficient, robust, and broadband target for axion-to-photon or dark-photon-to-photon conversion. We perform semi-analytical and numerical studies in small-volume 2D and 3D disordered systems to compute the conversion power as a function of dark matter mass. We also discuss the power gathered onto a sensitive photodetector in terms of the bulk properties of the disordered material, making it possible to characterize the predicted dark-matter-to-photon conversion rate across a wide range of wavelengths. Finally, we propose DPHaSE: the Dielectric Powder Haloscope SNSPD Experiment which is composed of a disordered dielectric target, a veto system, and a photon collection chamber to maximize the coupling between the powder target and a low noise superconducting nanowire single photon detector (SNSPD). With ambitious but realistic improvements to sensor area and detection efficiency at low energy, the projected reach in the 10 meV-eV mass range is sensitive to QCD axion-photon couplings and exceeds current constraints on dark photon dark matter by up to 5 orders of magnitude.

hep-ph↗

arXiv2026

Reconfigurable Superconducting Logic for On-Chip Photon Coincidence Detection

Scaling photonic quantum-information platforms requires arrays of superconducting nanowire single-photon detectors (SNSPDs) for feedforward control, in which optical operations are conditioned on Bell-state measurements relying on photon-coincidence detections. On-chip superconducting cryotron electronics, performing logic on detector outputs and driving optical modulators, could reduce latency and room-temperature interconnect complexity for feedforward schemes. To date, no cryotron circuits designed for this purpose have been demonstrated. We demonstrate a bias-programmable logic gate based on three nanocryotrons (nTrons) that implements selectable AND (coincidence), XOR (odd-parity), and OR functions. It operates on two electrical pulses at 4.2 K, with bit-error rates below $10^{-3}$, bias margins up to $\pm21.7\%$, and operation extending to 25 MHz over narrower bias windows. It performs coincidence and odd-parity detection on two SNSPDs' outputs with bit-error rates below $3.2 \times 10^{-2}$. As proof-of-concept, we show that nTrons can drive capacitive loads up to 1.15 V, potentially enabling compatibility with electro-optic modulators in feedforward schemes.

physics.app-ph↗

arXiv2026

Enhanced Mid-Infrared Single-Photon Detection with Antenna-Coupled Superconducting Nanowires

Scaling the photon-detection area of superconducting nanowire single-photon detectors (SNSPDs) has traditionally been achieved by nanowire meandering. However, material inhomogeneities and fabrication-induced defects, such as line-edge roughness, increase with nanowire length, leading to reduced internal photon-detection efficiency and elevated dark-count rates. This trade-off becomes increasingly pronounced as nanowires are scaled to sub-100 nm widths and sub-5 nm thicknesses required for mid- to far-infrared sensitivity. Here, we demonstrate an antenna-coupled SNSPD architecture that enhances the effective photon-detection area without increasing nanowire length. A crossed bowtie antenna integrated with an 80 nm-wide, 3 nm-thick WSi nanowire yields 15.7$\times$ increase in effective detection area at 7.4 $μ$m compared to a bare nanowire of identical geometric footprint, while maintaining the same internal detection efficiency and dark-count rate. Antenna coupling provides a scalable approach to increasing photon-detection area while reducing the noise-equivalent power, offering performance benefits for applications in astronomy, biological imaging, and molecular spectroscopy.

physics.optics↗

arXiv2026

Dark matter searches with a 13 meV threshold superconducting sensor array

Many well-motivated dark matter models predict meV-scale energy deposits in interactions with terrestrial experiments, but this regime is challenging to probe due to a lack of mature single-quantum detectors. Here we report results from QUALIPHIDE (QUAntum LImited PHotons In the Dark Experiment), a cryogenic dark matter search using a $41$-pixel array of energy-resolving microwave kinetic inductance detectors with a $13$ meV threshold, simultaneously used to look for both conversion photons from THz wavelength hidden photon dark matter and phonons from particle-like light dark matter interactions. The experimental design, with on- and off-focus pixels for the hidden photon search, allows for a data-driven background model, giving the experiment discovery potential. A blind analysis of $22$ hours of data shows no significant excess, setting the strongest constraints on the hidden photon kinetic mixing parameter $χ$ over the mass range of $13$-$90$ meV/$c^2$, reaching $1.5\times10^{-12}$ at $50$ meV/$c^2$. These data also yield among the first terrestrial limits on dark matter scattering off nuclei and electrons, down to $5$ MeV/$c^2$ and $20$ keV/$c^2$, respectively. The low threshold also enables future study of the low-energy excess limiting cryogenic detectors and, as we project, will allow for a terahertz-scale QCD axion search with a magnetic field.

hep-ex↗

arXiv2026

Ultrafast dynamics and light-induced superconductivity from first principles

Experiments on superconducting materials have unveiled unique emergent properties when they are driven far from equilibrium. However, a quantitative first-principles treatment that describes experimental observations is lacking. In this work, we develop an ab-initio model for the nonequilibrium response of optically irradiated superconducting films within the framework of conventional electron-phonon-mediated superconductivity, leveraging new numerical techniques to solve the Migdal-Eliashberg equations directly on the real-frequency axis. This enables us to quantitatively reproduce the optical response of superconducting films in pump-probe experiments and validate our approach on measurements of the differential reflectance of Pb and LaH$_{10}$ in response to a pump excitation. Similar calculations performed on the alkali-doped fulleride K$_3$C$_{60}$ reveal that a photo-induced superconducting state is generated after irradiation by an ultrafast mid-infrared pulse of sufficient intensity, as reported in prior experimental work. The enhancement in this framework is attributed to the excitation of quasiparticles to energies resonant with the strongest electron-phonon coupling in K$_3$C$_{60}$, in close analogy to the mechanism for enhancement of superconductivity under microwave irradiation, explaining the nature of the photo-induced superconducting state and elucidating the subsequent quasiparticle and phonon dynamics. Our results suggest that photo-induced superconductivity is accessible in more materials than previously recognized. We demonstrate this by performing calculations on calcium-intercalated graphite, CaC$_6$, and predict a similar photo-induced superconducting gap.

cond-mat.supr-con↗

arXiv2026

Fast Real-Axis Eliashberg Calculations: Full-bandwidth solutions beyond the constant density of states approximation

Experimentally relevant signatures of superconductivity require access to real-frequency quantities, such as the spectral functions, optical response, and transport properties, yet Migdal-Eliashberg calculations are commonly performed on the imaginary axis and then analytically continued, a step that is numerically delicate and can obscure physically relevant spectral features. Here we present a practical route to solving the finite-temperature Migdal-Eliashberg equations directly on the real-frequency axis, while retaining the effects from the full-bandwidth electronic structure. Our formulation accounts for particle-hole asymmetry through an energy-dependent electronic density of states, avoiding the constant density of states approximation often used in real-axis calculations, and includes a static screened Coulomb contribution. We introduce an efficient numerical technique to solve the Migdal-Eliashberg integrals whose computational cost scales linearly with the real-frequency grid, making high-resolution, full-bandwidth real-axis calculations feasible and providing direct access to the interacting Green's function and derived observables without analytic continuation. As an illustration, we apply the method to H$_{3}$S, where a van-Hove singularity near the Fermi level produces strong particle-hole asymmetry. The full-bandwidth solution yields noticeably different spectra than the constant density of states approximation and brings the superconducting gap and lineshapes into closer agreement with experiment, highlighting when band-structure details are essential. Furthermore, the methods presented here open the door to time-dependent, nonequilibrium simulations within Eliashberg theory.

cond-mat.supr-con↗

arXiv2025

Fast-Recovery Epitaxial NbN Superconducting Nanowire Single-Photon Detectors with Saturated Efficiency at 1550 nm in Liquid Helium

Achieving both high internal efficiency and fast reset times at elevated temperatures remains challenging due to limited understanding of how film properties govern SNSPD performance. We demonstrate that epitaxial NbN films on sapphire enable simultaneous high efficiency and rapid response. We fabricate and characterize SNSPDs based on these films deposited via DC magnetron sputtering on c-cut sapphire. High-quality epitaxial growth preserves a low electron diffusion coefficient and promotes strong electron-phonon coupling, yielding a high critical temperature and efficient hotspot formation in the dirty limit. X-ray diffraction and transmission electron microscopy confirm epitaxial alignment and lattice order. Nanowires of 20 nm width exhibit saturated internal efficiency at 1550 nm wavelength and short reset times at 4.2 K, enabled by lattice matching and high thermal conductance of the sapphire interface. Ab initio modeling reproduces photon count rates, linking device performance quantitatively to film properties such as diffusivity and electron-phonon coupling.

physics.app-ph↗

arXiv2025

Modeling electrothermal feedback of superconducting nanowire single photon detectors in SPICE

Superconducting nanowire single-photon detectors (SNSPDs) exhibit complex switching behaviors due to electrothermal feedback during the detection process. Modeling and understanding these behaviors is integral for designing superconducting devices; however, many models often prioritize accuracy over computational speed and intuitive integration for circuit designers. Here, we build upon a growing architecture of SPICE tools for superconducting nanowire devices by capturing complex residual heating effects in a compact thermal model of an SNSPD. We demonstrate that our model is comparable to more complicated thermal models of superconducting nanowire devices, including finite-element simulations, and is applicable for the fast development of SNSPD circuits.

physics.app-ph↗

arXiv2025

Photolithography-Compatible Three-Terminal Superconducting Switch for Driving CMOS Loads

Superconducting devices have enabled breakthrough performance in quantum sensing and ultra-low-power computing. Nevertheless, the need for a cryo-electronics platform that can interface superconductor electronics with Complementary Metal-Oxide-Semiconductor (CMOS) devices has become increasingly evident in many cutting-edge applications. In this work, we present a three-terminal micrometer-wide superconducting wire-based cryotron switch (wTron), fabricated using photolithography, that can directly interface with CMOS electronics. The wTron features an output impedance exceeding 1 k$Ω$ and exhibits reduced sensitivity to ambient magnetic noise, similar to its nanoscale predecessor, the nanocryotron. In addition, its micrometer-wide wires support switching currents in the mA range, making wTrons well-suited for driving current-hungry resistive loads and highly capacitive CMOS loads. We demonstrate this capability by using the wTron to drive room-temperature CMOS electronics, including an LED and a MOSFET with a gate capacitance of 500 pF. We then examine the optimal design parameters of wTrons to drive CMOS loads, such as MOSFETs, HEMTs, and electro-optic modulators. Furthermore, to demonstrate the foundry readiness of the wTron, we fabricated wTrons using MIT Lincoln Laboratory's SFQ5ee superconducting process and characterized their switching behavior. Our work shows that wTron will facilitate the interface between superconductor electronics and CMOS, thereby paving the way for the development of foundry-compatible cryo-electronic ecosystems to advance next-generation computing and quantum applications.

physics.app-ph↗

arXiv2025

Time-tagging data acquisition system for testing superconducting electronics based on an RFSoC and custom analog frontend

Novel electronic devices can often be operated in a plethora of ways, which makes testing circuits comprised of them difficult. Often, no single tool can simultaneously analyze the operating margins, maximum speed, and failure modes of a circuit, particularly when the intended behavior of subcomponents of the circuit is not standardized. This work demonstrates a cost-effective time-domain data acquisition system for electronic circuits that enables more intricate verification techniques than are practical with conventional experimental setups. We use high-speed digital-to-analog converters and real-time multi-gigasample-per-second waveform processing to push experimental circuits beyond their maximum operating speed. Our custom time-tagging data capture firmware reduces memory requirements and can be used to determine when errors occur. The firmware is combined with a thermal-noise-limited analog frontend with 50 dB of dynamic range. Compared to currently available commercial test equipment that is seven times more expensive, this data acquisition system was able to operate a superconducting shift register at a nearly three-times-higher clock frequency (200 MHz vs. 80 MHz).

physics.ins-det↗

arXiv2025

Ab initio modeling of nonequilibrium dynamics in superconducting detectors and qubits

Nonequilibrium quasiparticle (QP) and phonon dynamics are central to the operation of superconducting devices. Superconducting detectors, such as the superconducting nanowire single-photon detector, perform best when a large QP population is generated in response to small perturbations. Conversely, for superconducting qubits and topologically protected Majorana fermions, even relatively small QP densities can lead to significant performance degradation, and thus, ideal materials are less susceptible to QP poisoning. However, existing models of these devices lack a rigorous description of the QP and phonon dynamics, relying on approximations and phenomenology. In this article, we combine kinetic equations with density functional theory to model the nonequilibrium dynamics of a superconducting film ab initio. To demonstrate the universality of our model, we illustrate two examples: (1) we develop a model for the detection of single photons in superconducting nanowires, and (2) we calculate the energy-relaxation rate of a transmon qubit due to the presence of excess QPs. Our examples demonstrate from first principles that NbN is well-suited for single-photon detection and that Ta transmon qubits possess reduced sensitivity to QP poisoning relative to other materials, which is likely in part responsible for their longer coherence times. In contrast to previous models, our ab initio approach makes these predictions without experimental input and thus can be used to accelerate progress in device development. Moreover, by considering the full-bandwidth electron-phonon coupling, our approach can incorporate strong-coupling effects. Our methods effectively integrate ab initio materials modeling with nonequilibrium theory of superconductivity to perform practical modeling of superconducting devices, providing a comprehensive approach that connects fundamental theory with device applications.

cond-mat.supr-con↗

arXiv2025

Determination of Mid-Infrared Refractive Indices of Superconducting Thin Films Using Fourier Transform Infrared Spectroscopy

In this work, we present a technique to determine the mid-infrared refractive indices of thin superconducting films using Fourier transform infrared spectroscopy (FTIR). In particular, we performed FTIR transmission and reflection measurements on 10-nm-thick NbN and 15-nm-thick MoSi films in the wavelength range of 2.5 to 25 $μ$m, corresponding to frequencies of 12-120 THz or photon energies of 50-500 meV. To extract the mid-infrared refractive indices of these thin films, we used the Drude-Lorentz oscillator model to represent their dielectric functions and implemented an optimization algorithm to fit the oscillator parameters by minimizing the error between the measured and simulated FTIR spectra. We performed Monte Carlo simulations in the optimization routine to estimate error ranges in the extracted refractive indices resulting from multiple sources of measurement uncertainty. To evaluate the consistency of the extracted dielectric functions, we compared the refractive indices extrapolated from these dielectric functions in the UV to near-infrared wavelengths with the values separately measured using spectroscopic ellipsometry. We validated the applicability of the extracted mid-infrared refractive indices of NbN and MoSi at temperatures below their critical temperatures by comparing them with the Mattis-Bardeen model. This FTIR-based refractive index measurement approach can be extended to measure the refractive indices of thin films at wavelengths beyond 25 $μ$m, which will be useful for designing highly efficient photon detectors and photonic devices with enhanced optical absorption in the mid- and far-infrared wavelengths.

physics.optics↗

arXiv2025

High-Fidelity Control of a Strongly Coupled Electro-Nuclear Spin-Photon Interface

Long distance quantum networking requires combining efficient spin-photon interfaces with long-lived local memories. Group-IV color centers in diamond (SiV, GeV, and SnV) are promising candidates for this application, containing an electronic spin-photon interface and dopant nuclear spin memory. Recent work has demonstrated state-of-the-art performance in spin-photon coupling and spin-spin entanglement. However, coupling between the electron and nuclear spins introduces a phase kickback during optical excitation that limits the utility of the nuclear memory. Here, we propose using the large hyperfine coupling of SnV-117 to operate the device at zero magnetic field in a regime where the memory is insensitive to optical excitation. We further demonstrate ground state spin control of a SnV-117 color center integrated in a photonic integrated circuit, showing 97.8% gate fidelity and 2.5 ms coherence time for the memory spin level. This shows the viability of the zero-field protocol for high fidelity operation, and lays the groundwork for building quantum network nodes with SnV-117 devices.

quant-ph↗

arXiv2025

A superconducting full-wave bridge rectifier

Superconducting thin-film electronics are attractive for their low power consumption, fast operating speeds, and ease of interface with cryogenic systems such as single-photon detector arrays, and quantum computing devices. However, the lack of a reliable superconducting two-terminal asymmetric device, analogous to a semiconducting diode, limits the development of power-handling circuits, fundamental for scaling up these technologies. Existing efforts to date have been limited to single-diode proofs of principle and lacked integration of multiple controllable and reproducible devices to form complex circuits. Here, we demonstrate a robust superconducting diode with tunable polarity using the asymmetric vortex surface barrier in niobium nitride micro-bridges, achieving a 43% peak rectification efficiency, and showing half-wave rectification up to 120 MHz. We then realize and integrate several such diodes into a bridge rectifier circuit on a single microchip that performs continuous full-wave rectification up to 3 MHz and AC-to-DC conversion of a 50 MHz signal in periodic bursts with an estimated peak power efficiency of 50%.

physics.app-ph↗

arXiv2025

Coherent control of a superconducting qubit using light

Quantum communications technologies require a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states. Superconducting microwave qubits operating in cryogenic environments have emerged as promising candidates for quantum processor nodes. However, scaling these systems is challenging because they require bulky microwave components with high thermal loads that can quickly overwhelm the cooling power of a dilution refrigerator. Telecommunication frequency optical signals, meanwhile, can be fabricated in significantly smaller form factors while avoiding challenges due to high signal loss, noise sensitivity, and thermal loads due to their high carrier frequency and propagation in silica optical fibers. Transduction of information via coherent links between optical and microwave frequencies is therefore critical to leverage the advantages of optics for superconducting microwave qubits, while also enabling superconducting processors to be linked with low-loss optical interconnects. Here, we demonstrate coherent optical control of a superconducting qubit. We achieve this by developing a microwave-optical quantum transducer that operates with up to 1.18% conversion efficiency with low added microwave noise, and demonstrate optically-driven Rabi oscillations in a superconducting qubit.

quant-ph↗

arXiv2024

Electron Energy Loss Spectroscopy of 2D Materials in a Scanning Electron Microscope

This work demonstrates electron energy loss spectroscopy of 2D materials in a 1-30 keV electron microscope, observing 100-times stronger electron-matter coupling relative to 125 keV microscopes. We observe that the universal curve relating beam energy to scattering holds for the transition from bulk graphite to graphene, albeit with a scale factor. We calculate that optimal coupling for most 2D materials and optical nanostructures falls in this range, concluding that spectroscopy of such systems will greatly benefit from use of this previously unexplored energy regime.

physics.ins-det↗

arXiv2024

Characterizing and modeling the influence of geometry on the performance of superconducting nanowire cryotrons

The scaling of superconducting nanowire-based devices to larger arrays is often limited by the cabling required to interface with each device. Cryogenic integrated circuits constructed from nanowire cryotrons, or nanocryotrons, can address this limitation by performing signal processing on chip. In this study, we characterize key performance metrics of the nanocryotron to elucidate its potential as a logical element in cryogenic integrated circuits and develop an electro-thermal model to connect material parameters with device performance. We find that the performance of the nanocryotron depends significantly on the device geometry, and trade-offs are associated with optimizing the gain, jitter, and energy dissipation. We demonstrate that nanocryotrons fabricated on niobium nitride can achieve a grey zone less than 210 nA wide for a 5 ns long input pulse corresponding to a maximum achievable gain of 48 dB, an energy dissipation of less than 20 aJ per operation, and a jitter of less than 60 ps.

cond-mat.supr-con↗