arXiv subjects

Kartik Srinivasan

Publications and source records attributed to Kartik Srinivasan.

At least 109 records · Page 6Linked to original sources

arXiv2019

Indistinguishable photons from deterministically integrated single quantum dots in heterogeneous GaAs/Si$_3$N$_4$ quantum photonic circuits

Silicon photonics enables scaling of quantum photonic systems by allowing the creation of extensive, low-loss, reconfigurable networks linking various functional on-chip elements. Inclusion of single quantum emitters onto photonic circuits, acting as on-demand sources of indistinguishable photons or single-photon nonlinearities, may enable large-scale chip-based quantum photonic circuits and networks. Towards this, we use low-temperature $\textit{in situ}$ electron-beam lithography to deterministically produce hybrid GaAs/Si$_3$N$_4$ photonic devices containing single InAs quantum dots precisely located inside nanophotonic structures, which act as efficient, Si$_3$N$_4$ waveguide-coupled on-chip, on-demand single-photon sources. The precise positioning afforded by our scalable fabrication method furthermore allows observation of post-selected indistinguishable photons. This indicates a promising path towards significant scaling of chip-based quantum photonics, enabled by large fluxes of indistinguishable single-photons produced on-demand, directly on-chip.

physics.app-ph↗

arXiv2019

Tunable quantum beat of single photons enabled by nonlinear nanophotonics

We demonstrate the tunable quantum beat of single photons through the co-development of core nonlinear nanophotonic technologies for frequency-domain manipulation of quantum states in a common physical platform. Spontaneous four-wave mixing in a nonlinear resonator is used to produce non-degenerate, quantum-correlated photon pairs. One photon from each pair is then frequency shifted, without degradation of photon statistics, using four-wave mixing Bragg scattering in a second nonlinear resonator. Fine tuning of the applied frequency shift enables tunable quantum interference of the two photons as they are impinged on a beamsplitter, with an oscillating signature that depends on their frequency difference. Our work showcases the potential of nonlinear nanophotonic devices as a valuable resource for photonic quantum information science.

quant-ph↗

arXiv2019

Multi-functional integrated photonics in the mid-infrared with suspended AlGaAs on silicon

The microscale integration of mid- and longwave-infrared photonics could enable the development of fieldable, robust chemical sensors, as well as highly efficient infrared frequency converters. However, such technology would be defined by the choice of material platform, which immediately determines the strength and types of optical nonlinearities available, the optical transparency window, modal confinement, and physical robustness. In this work, we demonstrate a new platform, suspended AlGaAs waveguides integrated on silicon, providing excellent performance in all of these metrics. We demonstrate low propagation losses within a span of nearly two octaves (1.26 to 4.6 $μ$m) with exemplary performance of 0.45 dB/cm at $λ= 2.4$ $μ$m. We exploit the high nonlinearity of this platform to demonstrate 1560 nm-pumped second-harmonic generation and octave-spanning supercontinuum reaching out to 2.3 $μ$m with 3.4 pJ pump pulse energy. With mid-IR pumping, we generate supercontinuum spanning from 2.3 to 6.5 $μ$m. Finally, we demonstrate the versatility of the platform with mid-infrared passive devices such as low-loss 10 $μ$m-radius bends, compact power splitters with 96 $\pm$ 1% efficiency and edge couplers with 3.0 $\pm$ 0.1 dB loss. This platform has strong potential for multi-functional integrated photonic systems in the mid-IR.

physics.app-ph↗

arXiv2019

Quantum Frequency Conversion of a Quantum Dot Single-Photon Source on a Nanophotonic Chip

Single self-assembled InAs/GaAs quantum dots are promising bright sources of indistinguishable photons for quantum information science. However, their distribution in emission wavelength, due to inhomogeneous broadening inherent to their growth, has limited the ability to create multiple identical sources. Quantum frequency conversion can overcome this issue, particularly if implemented using scalable chip-integrated technologies. Here, we report the first demonstration of quantum frequency conversion of a quantum dot single-photon source on a silicon nanophotonic chip. Single photons from a quantum dot in a micropillar cavity are shifted in wavelength with an on-chip conversion efficiency of approximately 12 %, limited by the linewidth of the quantum dot photons. The intensity autocorrelation function g(2)(tau) for the frequency-converted light is antibunched with g(2)(0) = 0.290 +/- 0.030, compared to the before-conversion value g(2)(0) = 0.080 +/- 0.003. We demonstrate the suitability of our frequency conversion interface as a resource for quantum dot sources by characterizing its effectiveness across a wide span of input wavelengths (840 nm to 980 nm), and its ability to achieve tunable wavelength shifts difficult to obtain by other approaches.

quant-ph↗

arXiv2019

Photonic-crystal-reflector nano-resonators for Kerr-frequency combs

We demonstrate Kerr-frequency-comb generation with nanofabricated Fabry-Perot resonators with photonic-crystal-reflector (PCR) end mirrors. The PCR group-velocity-dispersion (GVD) is engineered to counteract the strong normal GVD of a rectangular waveguide fabricated on a thin, 450 nm silicon nitride device layer. The reflectors provide the resonators with both the high optical quality factor and anomalous GVD required for Kerr-comb generation. We report design, fabrication, and characterization of devices in the 1550 nm wavelengths bands, including the GVD spectrum and quality factor. Kerr-comb generation is achieved by exciting the devices with a continuous-wave (CW) laser. The versatility of PCRs enables a general design principle and a material-independent device infrastructure for Kerr-nonlinear-resonator processes, opening new possibilities for manipulation of light. Visible and multi-spectral-band resonators appear to be natural extensions of the PCR approach.

physics.optics↗

arXiv2019

Efficient telecom-to-visible spectral translation through ultra-low power nonlinear nanophotonics

The ability to spectrally translate lightwave signals in a compact, low-power platform is at the heart of the promise of nonlinear nanophotonic technologies. For example, a device to link the telecommunications band with visible and short near-infrared wavelengths can enable a connection between high-performance chip-integrated lasers based on scalable nanofabrication technology with atomic systems used for time and frequency metrology. While second-order nonlinear (χ^(2)) systems are the natural approach for bridging such large spectral gaps, here we show that third-order nonlinear (chi^(3)) systems, despite their typically much weaker nonlinear response, can realize spectral translation with unprecedented performance. By combining resonant enhancement with nanophotonic mode engineering in a silicon nitride microring resonator, we demonstrate efficient spectral translation of a continuous-wave signal from the telecom band (~ 1550 nm) to the visible band (~ 650 nm) through cavity-enhanced four-wave mixing. We achieve such translation over a wide spectral range >250 THz with a translation efficiency of (30.1 +/- 2.8) % and using an ultra-low pump power of (329 +/- 13) uW. The translation efficiency projects to (274 +/- 28) % at 1 mW and is more than an order of magnitude larger than what has been achieved in current nanophotonic devices.

physics.optics↗

arXiv2019

A solid-state entangled photon pair source with high brightness and indistinguishability

The generation of high-quality entangled photon pairs has been being a long-sought goal in modern quantum communication and computation. To date, the most widely-used entangled photon pairs are generated from spontaneous parametric downconversion, a process that is intrinsically probabilistic and thus relegated to a regime of low pair-generation rates. In contrast, semiconductor quantum dots can generate triggered entangled photon pairs via a cascaded radiative decay process, and do not suffer from any fundamental trade-off between source brightness and multi-pair generation. However, a source featuring simultaneously high photon-extraction efficiency, high-degree of entanglement fidelity and photon indistinguishability has not yet been reported. Here, we present an entangled photon pair source with high brightness and indistinguishability by deterministically embedding GaAs quantum dots in broadband photonic nanostructures that enable Purcell-enhanced emission. Our source produces entangled photon pairs with a record pair collection probability of up to 0.65(4) (single-photon extraction efficiency of 0.85(3)), entanglement fidelity of 0.88(2), and indistinguishabilities of 0.901(3) and 0.903(3), which immediately creates opportunities for advancing quantum photonic technologies.

quant-ph↗

arXiv2019

Stellar Spectroscopy in the Near-infrared with a Laser Frequency Comb

The discovery and characterization of exoplanets around nearby stars is driven by profound scientific questions about the uniqueness of Earth and our Solar System, and the conditions under which life could exist elsewhere in our Galaxy. Doppler spectroscopy, or the radial velocity (RV) technique, has been used extensively to identify hundreds of exoplanets, but with notable challenges in detecting terrestrial mass planets orbiting within habitable zones. We describe infrared RV spectroscopy at the 10 m Hobby-Eberly telescope that leverages a 30 GHz electro-optic laser frequency comb with nanophotonic supercontinuum to calibrate the Habitable Zone Planet Finder spectrograph. Demonstrated instrument precision <10 cm/s and stellar RVs approaching 1 m/s open the path to discovery and confirmation of habitable zone planets around M-dwarfs, the most ubiquitous type of stars in our Galaxy.

astro-ph.EP↗

arXiv2018

Dual-comb spectroscopy with tailored spectral broadening in Si$_3$N$_4$ nanophotonics

Si$_3$N$_4$ waveguides, pumped at 1550 nm, can provide spectrally smooth, broadband light for gas spectroscopy in the important 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m atmospheric water window, which is only partially accessible with silica-fiber based systems. By combining Er+:fiber frequency combs and supercontinuum generation in tailored Si$_3$N$_4$ waveguides, high signal-to-noise dual-comb spectroscopy (DCS) spanning 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m is demonstrated. Acquired broadband dual-comb spectra of CO and CO$_2$ agree well with database line shape models and have a spectral-signal-to-noise as high as 48$/\sqrt{\mathrm{s}}$, showing that the high coherence between the two combs is retained in the Si$_3$N$_4$ supercontinuum generation. The DCS figure of merit is 6$\times 10^6/\sqrt{\mathrm{s}}$, equivalent to that of all-fiber DCS systems in the 1.6 ${\mathrmμ}$m band. Based on these results, future DCS can combine fiber comb technology with Si$_3$N$_4$ waveguides to access new spectral windows in a robust non-laboratory platform.

physics.optics↗

arXiv2018

A Kerr-microresonator optical clockwork

Kerr microresonators generate interesting and useful fundamental states of electromagnetic radiation through nonlinear interactions of continuous-wave (CW) laser light. Using photonic-integration techniques, functional devices with low noise, small size, low-power consumption, scalable fabrication, and heterogeneous combinations of photonics and electronics can be realized. Kerr solitons, which stably circulate in a Kerr microresonator, have emerged as a source of coherent, ultrafast pulse trains and ultra-broadband optical-frequency combs. Using the f-2f technique, Kerr combs support carrier-envelope-offset phase stabilization for optical synthesis and metrology. In this paper, we introduce a Kerr-microresonator optical clockwork based on optical-frequency division (OFD), which is a powerful technique to transfer the fractional-frequency stability of an optical clock to a lower frequency electronic clock signal. The clockwork presented here is based on a silicon-nitride (Si$_3$N$_4$) microresonator that supports an optical-frequency comb composed of soliton pulses at 1 THz repetition rate. By electro-optic phase modulation of the entire Si$_3$N$_4$ comb, we arbitrarily generate additional CW modes between the Si$_3$N$_4$ comb modes; operationally, this reduces the pulse train repetition frequency and can be used to implement OFD to the microwave domain. Our experiments characterize the residual frequency noise of this Kerr-microresonator clockwork to one part in $10^{17}$, which opens the possibility of using Kerr combs with high performance optical clocks. In addition, the photonic integration and 1 THz resolution of the Si$_3$N$_4$ frequency comb makes it appealing for broadband, low-resolution liquid-phase absorption spectroscopy, which we demonstrate with near infrared measurements of water, lipids, and organic solvents.

physics.optics↗

arXiv2018

Tuning Kerr-Soliton Frequency Combs to Atomic Resonances

Frequency combs based on nonlinear-optical phenomena in integrated photonics are a versatile light source that can explore new applications, including frequency metrology, optical communications, and sensing. We demonstrate robust frequency-control strategies for near-infrared, octave-bandwidth soliton frequency combs, created with nanofabricated silicon-nitride ring resonators. Group-velocity-dispersion engineering allows operation with a 1064 nm pump laser and generation of dual-dispersive-wave frequency combs linking wavelengths between approximately 767 nm and 1556 nm. To tune the mode frequencies of the comb, which are spaced by 1 THz, we design a photonic chip containing 75 ring resonators with systematically varying dimensions and we use 50 $^\circ$C of thermo-optic tuning. This single-chip frequency comb source provides access to every wavelength including those critical for near-infrared atomic spectroscopy of rubidium, potassium, and cesium. To make this possible, solitons are generated consistently from device-to-device across a single chip, using rapid pump frequency sweeps that are provided by an optical modulator.

physics.optics↗

arXiv2018

Fully self-referenced frequency comb consuming 5 Watts of electrical power

We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fiber oscillator/amplifier pumped by two 250-mW passively-cooled pump diodes that consume less than 5 W of electrical power. The temperature tuning of the oscillator, necessary to stabilize the repetition rate in the presence of environmental temperature changes, is achieved by resistive heating of a section of gold-palladium-coated fiber within the laser cavity. By heating only the small thermal mass of the fiber, the repetition rate is tuned over 4.2 kHz (corresponding to an effective temperature change of 4.2 °C) with a fast time constant of 0.5 s, at a low power consumption of 0.077 W/°C, compared to 2.5 W/°C in the conventional 200-MHz comb design.

physics.ins-det↗

arXiv2018

Tunable mid-infrared generation via wide-band four wave mixing in silicon nitride waveguides

We experimentally demonstrate wide-band (>100 THz) frequency down-conversion of near-infrared (NIR) femtosecond-scale pulses from an Er:fiber laser to the mid-infrared (MIR) using four-wave-mixing (FWM) in photonic-chip silicon-nitride waveguides. The engineered dispersion in the nanophotonic geometry, along with the wide transparency range of silicon nitride, enables large-detuning FWM phase-matching and results in tunable MIR from 2.6-3.6 um on a single chip with 100-pJ-scale pump-pulse energies. Additionally, we observe > 20 dB broadband parametric gain for the NIR pulses when the FWM process is operated in a frequency up-conversion configuration. Our results demonstrate how integrated photonic circuits could realize multiple nonlinear optical phenomena on the same chip and lead to engineered synthesis of broadband, tunable, and coherent light across the NIR and MIR wavelength bands from fiber-based pumps.

physics.app-ph↗

arXiv2018

Tuning and Stabilization of Optomechanical Crystal Cavities Through NEMS Integration

Nanobeam optomechanical crystals, in which localized GHz frequency mechanical modes are coupled to wavelength-scale optical modes, are being employed in a variety of experiments across different material platforms. Here, we demonstrate the electrostatic tuning and stabilization of such devices, by integrating a Si$_3$N$_4$ slot-mode optomechanical crystal cavity with a nanoelectromechanical systems (NEMS) element, which controls the displacement of an additional "tuning" beam within the optical near-field of the optomechanical cavity. Under DC operation, tuning of the optical cavity wavelength across several optical linewidths with little degradation of the optical quality factor ($Q\approx10^5$) is observed. The AC response of the tuning mechanism is measured, revealing actuator resonance frequencies in the 10 MHz to 20 MHz range, consistent with the predictions from simulations. Feedback control of the optical mode resonance frequency is demonstrated, and alternative actuator geometries are presented.

physics.app-ph↗

arXiv2018

Self-organized nonlinear gratings for ultrafast nanophotonics

Modern nonlinear optical materials allow light of one wavelength be efficiently converted into light at another wavelength. However, designing nonlinear optical materials to operate with ultrashort pulses is difficult, because it is necessary to match both the phase velocities and group velocities of the light. Here we show that self-organized nonlinear gratings can be formed with femtosecond pulses propagating through nanophotonic waveguides, providing simultaneous group-velocity matching and quasi-phase-matching for second harmonic generation. We record the first direct microscopy images of photo-induced nonlinear gratings, and demonstrate how these waveguides enable simultaneous $χ^{(2)}$ and $χ^{(3)}$ nonlinear processes, which we utilize to stabilize a laser frequency comb. Finally, we derive the equations that govern self-organized grating formation for femtosecond pulses and explain the crucial role of group-velocity matching. In the future, such nanophotonic waveguides could enable scalable, reconfigurable nonlinear optical systems.

physics.optics↗

arXiv2018

Chip-integrated visible-telecom photon pair sources for quantum communication

Photon pair sources are fundamental building blocks for quantum entanglement and quantum communication. Recent studies in silicon photonics have documented promising characteristics for photon pair sources within the telecommunications band, including sub-milliwatt optical pump power, high spectral brightness, and high photon purity. However, most quantum systems suitable for local operations, such as storage and computation, support optical transitions in the visible or short near-infrared bands. In comparison to telecommunications wavelengths, the significantly higher optical attenuation in silica at such wavelengths limits the length scale over which optical-fiber-based quantum communication between such local nodes can take place. One approach to connect such systems over fiber is through a photon pair source that can bridge the visible and telecom bands, but an appropriate source, which should produce narrow-band photon pairs with a high signal-to-noise ratio, has not yet been developed in an integrated platform. Here, we demonstrate a nanophotonic visible-telecom photon pair source for the first time, using high quality factor silicon nitride resonators to generate bright photon pairs with an unprecedented coincidence-to-accidental ratio (CAR) up to (3800 +/- 200). We further demonstrate dispersion engineering of the microresonators to enable the connection of different species of trapped atoms/ions, defect centers, and quantum dots to the telecommunications bands for future quantum communication systems.

physics.optics↗

arXiv2018

Phased-Locked Two-Color Single Soliton Microcombs in Dispersion-Engineered Si3N4 Resonators

We propose and theoretically investigate a dispersion-engineered Si3N4 microring resonator, based on a cross-section containing a partially-etched trench, that supports phase-locked, two-color soliton microcomb states. These soliton states consist of a single circulating intracavity pulse with a modulated envelope that sits on a continuous wave background. Such temporal waveforms produce a frequency comb whose spectrum is spread over two widely-spaced spectral windows, each exhibiting a squared hyperbolic secant envelope, with the two windows phase-locked to each other via Cherenkov radiation. The first spectral window is centered around the 1550 nm pump, while the second spectral window is tailored based on straightforward geometric control, and can be centered as short as 750 nm and as long as 3000 nm. We numerically analyze the robustness of the design to parameter variation, and consider its implications to self-referencing and visible wavelength comb generation.

physics.optics↗

arXiv2018

Photonic waveguide mode to free-space Gaussian beam extreme mode converter

Integration of photonic chips with atomic, micromechanical, chemical and biological systems can advance science and open many possibilities in chip-scale devices and technology. Compact photonic structures for direct coupling of light between high-index single-mode waveguides and arbitrary free-space modes spanning hundreds of waves in cross-section would eliminate bulky optical components and enable integration of photonics into many new applications requiring wide beams, structured light and centimeter-scale propagation distances with low diffraction-limited losses. Conventional fiber-coupling approaches do not scale well for accurate, low-loss coupling across the extremely large mode scale mismatch ($\approx10^6$ times in modal area). Here we present an extreme mode converter that can transform the photonic waveguide mode to the diffraction-limited, free-space Gaussian beam, with a beam waist of about $160~μ$m. Using two identical converters, we demonstrate a grating-to-grating coupling that couples the radiating beam back to the chip through a mirror reflection in free-space. Operating at 780~nm for integration with chip-scale atomic vapor cell cavities, our design can be adapted for visible, telecommunication or other wavelengths. Furthermore, other types of beams can be implemented by using the 2-stage expansion approach presented in this paper.

physics.app-ph↗