arXiv subjects

Kazumasa Iida

Publications and source records attributed to Kazumasa Iida.

At least 19 recordsLinked to original sources

arXiv2026

Freestanding GdBa2Cu3O7 Thin Films via Optimized Buffer Layer Design: Preserving Superconducting Properties

Freestanding GdBa2Cu3O7 (GdBCO) superconducting thin films were fabricated using a water-soluble Sr3Al2O6 (SAO) sacrificial layer in combination with thermal release tape. An amorphous Al2O3 capping layer was introduced to suppress crack formation during the lift-off process. The influence of buffer-layer design inserted between the GdBCO and SAO layers was systematically investigated with respect to structural integrity and superconducting properties after lift-off. A LaAlO3/SrTiO3 bilayer buffer was found to be essential for maintaining epitaxial growth and a superconducting transition temperature (Tc) of approximately 92 K after lift-off, comparable to that of the as-grown films. In contrast, a reversed SrTiO3/LaAlO3 bilayer and single-layer buffer structures led to a suppression of Tc, highlighting the critical role of stacking sequence. These results demonstrate that optimization of the buffer-layer design is a key factor for realizing high-quality freestanding GdBCO films while maintaining their superconducting characteristics.

cond-mat.supr-con↗

arXiv2025

Status of Iron Based Superconductors: characteristics and relevant properties for applications

Since the discovery of iron-based superconductors (IBSs) on LaFePO in 2006, many types of IBSs have been fabricated. IBSs have usually been compared to cuprates and MgB2, and the methodology of research developed by them have been implemented to IBSs. As a result, many similarities between IBSs and cuprates have been revealed, e.g., the parent compounds being antiferromagnets and grain boundaries being weak-links to some extent. On the other hands, the distinct features of IBSs are highlighted as multiband superconductors (i.e., the 5 bands of Fe 3d orbital crossing Fermi level) and extended s-wave symmetry. Additionally, some of the IBSs are topological superconductors that can be possible platforms for quantum computing. In this paper, an overview of IBS research and development in the last 18 years will be reported, involving characteristics of IBSs as well as strategies of increasing the superconducting transition temperature and critical current density.

cond-mat.supr-con↗

arXiv2024

Structural analysis and transport properties of [010]-tilt grain boundaries in Fe(Se,Te)

Understanding the nature of grain boundaries is a prerequisite for fabricating high-performance superconducting bulks and wires. For iron-based superconductors [e.g. Ba(Fe,Co)$_2$As$_2$, Fe(Se,Te), and NdFeAs(O,F)], the dependence of the critical current density $J_\mathrm{c}$ on misorientation angle ($θ_\mathrm{GB}$) has been explored on [001]-tilt grain boundaries, but no data for other types of orientations have been reported. Here, we report on the structural and transport properties of Fe(Se,Te) grown on CeO$_2$-buffered symmetric [010]-tilt roof-type SrTiO$_3$ bicrystal substrates by pulsed laser deposition. X-ray diffraction and transmission electron microscopy revealed that $θ_\mathrm{GB}$ of Fe(Se,Te) was smaller whereas $θ_\mathrm{GB}$ of CeO$_2$ was larger than that of the substrate. The difference in $θ_\mathrm{GB}$ between the CeO$_2$ buffer layer and the substrate is getting larger with increasing $θ_\mathrm{GB}$. For $θ_\mathrm{GB}\geq24^\circ$ of the substrates, $θ_\mathrm{GB}$ of Fe(Se,Te) was zero, whereas $θ_\mathrm{GB}$ of CeO$_2$ was continuously increasing. The inclined growth of CeO$_2$ can be explained by the geometrical coherency model. The $c$-axis growth of Fe(Se,Te) for $θ_\mathrm{GB}\geq24^\circ$ of the substrates is due to the domain matching epitaxy on (221) planes of CeO$_2$. Electrical transport measurements confirmed no reduction of inter-grain $J_\mathrm{c}$ for $θ_\mathrm{GB}\leq9^\circ$, indicative of strong coupling between the grains.

cond-mat.supr-con↗

arXiv2022

K-doped Ba122 epitaxial thin film on MgO substrate by buffer engineering

Molecular beam epitaxy of K-doped Ba122 (Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$) superconductor was realized on a MgO substrate. Microstructural observation revealed that the undoped Ba122 served as a perfect buffer layer for epitaxial growth of the K-doped Ba122. The film exhibited a high critical temperature of 39.8 K and a high critical current density of 3.9 MA/cm$^\text{2}$ at 4 K. The successful growth of epitaxial thin film will enable artificial single grain boundary on oxide bicrystal substrates and reveal the grain boundary transport nature of K-doped Ba122.

cond-mat.supr-con↗

arXiv2021

Nanoscale Texture and Microstructure in NdFeAs(O,F)/IBAD-MgO Superconducting Thin Film with Superior Critical Current Properties

This paper reports the nanoscale texture and microstructure of a high-performance NdFeAs(O,F) superconducting thin film grown by molecular beam epitaxy on a textured MgO/Y$_2$O$_3$/Hastelloy substrate. The NdFeAs(O,F) film forms a highly textured columnar grain structure by epitaxial growth on the MgO template. Although the film contains stacking faults along the $ab$-plane as well as grain boundaries perpendicular to the $ab$-plane, good superconducting properties are measured: a critical temperature, $T _{\rm c}$, of 46 K and a self-field critical current density, $J_{\rm c}$, of $2 \times 10^6 \,{\rm A/cm^2}$ at 4.2 K. Automated crystal orientation mapping by scanning precession electron diffraction in transmission electron microscopy is employed to analyze the misorientation angles between adjacent grains in a large ensemble (247 grains). 99% of the grain boundaries show in-plane misorientation angles ($Δγ$) less than the critical angle $θ_{\rm c}$, which satisfies one of the necessary conditions for the high $J_{\rm c}$. Comparing the columnar grain size distribution with the mean distance of the flux line lattice, the triple junctions of low-angle grain boundaries are found to be effective pinning centers, even at high temperatures ($\ge$35 K) and/or low magnetic fields.

cond-mat.supr-con↗

arXiv2021

Approaching the ultimate superconducting properties of (Ba,K)Fe2As2 by naturally formed low-angle grain boundary networks

The most effective way to enhance the dissipation-free supercurrent in presence of magnetic field for type II superconductors is the introduction of defects that acts as artificial pinning centres (APCs) for the vortices. For instance, the in-field critical current density of doped BaFe2As2 (Ba122), one of the most technologically important Fe-based superconductors, has been improved over the last decade by APCs created by ion-irradiation. The technique of ion-irradiation has been commonly implemented to determine the ultimate superconducting properties. However, this method is rather complicated and expensive. Here, we report on a surprisingly high critical current density and strong pinning efficiency close to the crystallographic c-axis for a K-doped Ba122 epitaxial thin film without APCs, achieving performance comparable to ion-irradiated K-doped Ba122 single crystals. Microstructural analysis reveals that the film is composed of columnar grains having width around 30-60 nm. The grains are rotated around the b- (or a-) axis by 1.5 degree and around the c-axis by -1 degree, resulting in the formation of low-angle grain boundary networks. This study demonstrates that the upper limit of in-field properties reached in ion-irradiated K-doped Ba122 is achievable by grain boundary engineering, which is a simple and industrially scalable manner.

cond-mat.supr-con↗

arXiv2021

High $J_{\rm c}$ and low anisotropy of hydrogen doped NdFeAsO superconducting thin film

The recent realisations of hydrogen doped $Ln$FeAsO ($Ln$=Nd and Sm) superconducting epitaxial thin films call for further investigation of their structural and electrical transport properties. Here, we report on the microstructure of a NdFeAs(O,H) epitaxial thin film and its temperature, field, and orientation dependencies of the resistivity and the critical current density $J_{\rm c}$. The superconducting transition temperature $T_{\rm c}$ is comparable to NdFeAs(O,F). Transmission electron microscopy investigation supported that hydrogen is homogenously substituted for oxygen. A high self-field $J_{\rm c}$ of over 10 MA/cm$^2$ was recorded at 5 K, which is likely to be caused by a short London penetration depth. The anisotropic Ginzburg-Landau scaling for the angle dependence of $J_{\rm c}$ yielded temperature-dependent scaling parameters $γ_{\rm J}$ that decreased from 1.6 at 30 K to 1.3 at 5 K. This is opposite to the behaviour of NdFeAs(O,F). Additionally, $γ_{\rm J}$ of NdFeAs(O,H) is smaller than that of NdFeAs(O,F). Our results indicate that heavily electron doping by means of hydrogen substitution for oxygen in $Ln$FeAsO is highly beneficial for achieving high $J_{\rm c}$ with low anisotropy without compromising $T_{\rm c}$, which is favourable for high-field magnet applications.

cond-mat.supr-con↗

arXiv2021

Realization of epitaxial thin films of the superconductor K-doped BaFe$_\text{2}$As$_\text{2}$

The iron-based superconductor Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$ is emerging as a key material for high magnetic field applications owing to the recent developments in superconducting wires and bulk permanent magnets. Epitaxial thin films play important roles in investigating and artificially tuning physical properties; nevertheless, the synthesis of Ba$_{1-x}$K$_x$Fe$_2$As$_2$ epitaxial thin films remained challenging because of the high volatility of K. Herein, we report the successful growth of epitaxial Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$ thin films by molecular-beam epitaxy with employing a combination of fluoride substrates (CaF$_\text{2}$, SrF$_\text{2}$, and BaF$_\text{2}$) and a low growth temperature (350$-$420$^\circ$C). Our epitaxial thin film grown on CaF$_\text{2}$ showed sharp superconducting transition at an onset critical temperature of 36 K, slightly lower than bulk crystals by ~2 K due presumably to the strain effect arising from the lattice and thermal expansion mismatch. Critical current density ($J$$_\text{c}$) determined by the magnetization hysteresis loop is as high as 2.2 MA/cm$^\text{2}$ at 4 K under self-field. In-field $J$$_\text{c}$ characteristics of the film are superior to the bulk crystals. The realization of epitaxial thin films opens opportunities for tuning superconducting properties by epitaxial strain and revealing intrinsic grain boundary transport of Ba$_{1-x}$K$_x$Fe$_\text{2}$As$_\text{2}$.

cond-mat.supr-con↗

arXiv2020

Grain boundary characteristics of Fe-based superconductors

Understanding the nature of grain boundary (GB) characteristics in combination with creating low-energy GBs by modifying the processing conditions, so-called GB engineering, is of great importance for controlling and reducing the defect density, leading to improved functionalities of polycrystalline metals and ceramics. For superconductors particularly, including both low- and high-temperature superconductors, GB engineering has been developed to improve especially the critical current densities, Jc, across these GBs. The intrinsic physical properties of a given superconductor such as the coherence length, the order parameter symmetry, and their anisotropies would determine the strategy of GB engineering. In this topical review, we present an overview of the GB characteristics and GB engineering of Fe-based superconductors (FBS) in the form of polycrystalline bulks and wires, and thin films with application potential, e.g. for high-field magnet wires. Prior to the FBS, GB engineering of the cuprates and MgB2 are also briefly covered.

cond-mat.supr-con↗

arXiv2020

Anisotropy of the transport properties of NdFeAs(O,F) thin films grown on vicinal substrates

NdFeAs(O,F) thin films having different fluorine contents were grown on 5 deg. or 10 deg. vicinal cut MgO and CaF2 single crystalline substrates by molecular beam epitaxy. Structural characterisations by reflection high-energy electron diffraction and x-ray diffraction confirmed the epitaxial growth of NdFeAs(O,F). The resistivities of the ab-plane and along the c-axis were derived from the resistivity measurements in the longitudinal and transversal directions. The c-axis resistivity was always higher than the ab-plane resistivity, resulting from the anisotropic electronic structure. The resistivity anisotropy at 300 K was almost constant in the range of 50-90 irrespective of the F content. On the other hand, the resistivity anisotropy at 56 K showed a strong fluorine dependence: the resistivity anisotropy was over 200 for the films with optimum F contents (superconducting transition temperature Tc around 50 K), whereas the resistivity anisotropy was around 70 for the films in the under-doped regime (Tc between 35 and 45 K). The mass anisotropy are the effective masses along the c-axis and on the ab-plane) close to Tc derived from the anisotropic Ginzburg-Landau approach using the angular-dependency of the ab-plane resistivity was in the range from 2 to 5. On the assumption that the square of the mass anisotropy is equal to the resistivity anisotropy, those values are small compared to the normal state anisotropy.

cond-mat.supr-con↗

arXiv2019

Ambipolar suppression of superconductivity by ionic gating in optimally-doped BaFe2(As,P)2 ultrathin films

Superconductivity (SC) in the Ba-122 family of iron-based compounds can be controlled by aliovalent or isovalent substitutions, applied external pressure, and strain, the combined effects of which are sometimes studied within the same sample. Most often, the result is limited to a shift of the SC dome to different doping values. In a few cases, the maximum SC transition at optimal doping can also be enhanced. In this work, we study the combination of charge doping together with isovalent P substitution and strain by performing ionic gating experiments on BaFe$_2$(As$_{0.8}$P$_{0.2}$)$_2$ ultrathin films. We show that the polarization of the ionic gate induces modulations to the normal-state transport properties that can be mainly ascribed to surface charge doping. We demonstrate that ionic gating can only shift the system away from the optimal conditions, as the SC transition temperature is suppressed by both electron and hole doping. We also observe a broadening of the resistive transition, which suggests that the SC order parameter is modulated nonhomogeneously across the film thickness, in contrast with earlier reports on charge-doped standard BCS superconductors and cuprates.

cond-mat.supr-con↗

arXiv2019

Grain boundary characteristics of oxypnictide NdFeAs(O,F) superconductors

We have systematically investigated the grain boundary (GB) angle dependence of transport properties for NdFeAs(O,F) fabricated on [001]-tilt symmetric MgO bicrystal substrates. In our previous study, NdFeAs(O,F) bicrystal films showed a weak-link behaviour even at a GB angle of 6°. However, this was caused by an extrinsic effect originating from the damage to both NdFeAs(O,F) and MgO substrate by excess F-diffusion along the grain boundary. To investigate the intrinsic nature of grain boundaries, we minimized the damage to NdFeAs(O,F) and MgO by reducing the deposition temperature of NdOF over-layer needed for F-doping. The resultant NdFeAs(O,F) bicrystal films have a critical angle of 8.5°, above which Jc starts to decrease exponentially. This critical angle is almost the same as those of other Fe-based superconductors.

cond-mat.supr-con↗

arXiv2019

Novel method to study strain effect of thin films using a piezoelectric-based device and a flexible metallic substrate

For applying tensile or compressive uniaxial strain to functional thin films, we propose a novel approach in combining a piezoelectric-based device and a technical metallic substrate used widely in the 2nd generation coated conductors (i.e. superconducting tapes). A strain-induced shift of the superconducting transition temperature of 0.1 K for Co-doped BaFe2As2 was observed along [100] direction, corresponding to a uniaxial pressure derivative dTc/dp100=-4 K/GPa. For Mn3CuN, a uniaxial strain derivative along [100] direction of the Curie temperature dTC/de100=13 K/% was observed. The current approach is applicable to various functional thin films in a wide range of temperatures.

cond-mat.supr-con↗

arXiv2018

Fe-based superconducting thin films on metallic substrates: growth, characteristics and relevant properties

The discovery of Fe-based superconductors (FBS) as the second class of high-temperature superconducting transition (high-Tc) materials after the cuprates generated a significant impact on the community of fundamental and applied superconductivity research. Whenever a new class of high-Tc superconducting materials is discovered, a lot of effort is devoted to growing single crystals and epitaxial thin films for exploring basic physical quantities. Although several properties of FBS are similar to the cuprates (large upper critical fields, resulting from a short coherence lengths, and small carrier density), others are distinctly different. For instance, in FBS the symmetry of the superconducting order parameter is most likely not a d-wave but an s+-wave, depending on the stoichiometry, crystallographic system, and doping level. Additionally, the critical current densities of FBS are less sensitive to the presence of grain boundaries (GBs) than those of the high-Tc cuprates. These features are highly beneficial for the realization of cheaper conductors for high-field magnets at low temperatures. Indeed, several groups have demonstrated FBS thin films on technical metallic substrates and powder-in-tube processed FBS wires as proof-of-principle studies for conductor applications. FBS on technical substrates also give many opportunities for studying how GB networks affect the critical current and how uniaxial strain impacts the superconducting properties. In this article, we review FBS thin films, especially on technical metallic substrates, and focus on application-relevant properties like pinning improvement by natural and artificial defects as well as the transparency of GBs and GB networks. The recent development of FBS thin films on technical substrates and their superconducting properties are presented and the performance gap with respect to films on single crystals is discussed.

cond-mat.supr-con↗

arXiv2018

Universal scaling behavior of the upper critical field in strained FeSe0.7Te0.3 thin films

Revealing the universal behaviors of iron-based superconductors (FBS) is important to elucidate the microscopic theory of superconductivity. In this work, we investigate the effect of in-plane strain on the slope of the upper critical field Hc2 at the superconducting transition temperature Tc (i.e. -dHc2/dT) for FeSe0.7Te0.3 thin films. The in-plane strain tunes Tc in a broad range, while the composition and disorder are almost unchanged. We show that -dHc2/dT scales linearly with Tc, indicating that FeSe0.7Te0.3 follows the same universal behavior as observed for pnictide FBS. The observed behavior is consistent with a multiband superconductivity paired by interband interaction such as sign change s+- superconductivity.

cond-mat.supr-con↗

arXiv2018

Fabrication of grain boundary junctions using NdFeAs(O,F) superconducting thin films

We report on the growth of NdFeAs(O,F) thin films on [001]-tilt MgO bicrystal substrates with misorientation angle theta_GB=6°, 12°, 24° and 45°, and their inter- and intra-grain transport properties. X-ray diffraction study confirmed that all our NdFeAs(O,F) films are epitaxially grown on the MgO bicrystals. The theta_GB dependence of the inter-grain critical current density Jc shows that, unlike Co-doped BaFe2As2 and Fe(Se,Te), its decay with theta_GB is rather significant. As a possible reason of this result, fluorine may have diffused preferentially to the grain boundary region and eroded the crystal structure.

cond-mat.supr-con↗

arXiv2017

Observation of Zero Resistance in As-Electrodeposited FeSe

Superconducting FeSe films were electrochemically deposited on rolling-assisted biaxially textured substrate (RABiTS) tape. We observed zero resistivity in the as-electrodeposited FeSe film prepared on the RABiTS when the appropriate voltage was applied while it was dipped into the solution. When the RABiTS tape was dipped in the solution without applying voltage, a thin Se film was deposited on the substrate. The compositional ratio of the FeSe film got closer to the stoichiometric ratio with decreasing the dipping time before applying voltage.

cond-mat.supr-con↗

arXiv2017

The influence of the in-plane lattice constant on the superconducting transition temperature of FeSe0.7Te0.3 thin films

Epitaxial Fe(Se,Te) thin films were prepared by pulsed laser deposition on (La0.18Sr0.82)(Al0.59Ta0.41)O3 (LSAT), CaF2-buffered LSAT and bare CaF2 substrates, which exhibit an almost identical in-plane lattice parameter. The composition of all Fe(Se,Te) films were determined to be FeSe0.7Te0.3 by energy dispersive X-ray spectroscopy, irrespective of the substrate. Albeit the lattice parameters of all templates have comparable values, the in-plane lattice parameter of the FeSe0.7Te0.3 films varies significantly. We found that the superconducting transition temperature (Tc) of FeSe0.7Te0.3 thin films is strongly correlated with their a-axis lattice parameter. The highest Tc of over 19 K was observed for the film on bare CaF2 substrate, which is related to unexpectedly large in-plane compressive strain originating mostly from the thermal expansion mismatch between the FeSe0.7Te0.3 film and the substrate.

cond-mat.supr-con↗