arXiv subjects

Kedar Hippalgaonkar

Publications and source records attributed to Kedar Hippalgaonkar.

At least 37 records · Page 2Linked to original sources

arXiv2024

Exploring material compositions for synthesis using oxidation states

Recent advances in machine learning techniques have made it possible to use high-throughput screening to identify novel materials with specific properties. However, the large number of potential candidates produced by these techniques can make it difficult to select the most promising ones. In this study, we develop the oxidation state probability (OSP) method which evaluates ternary compounds based on the probability (the OSP metric) of each element to adopt the required oxidation states for fulfilling charge neutrality. We compare this model with Roost and the Fourier-transformed crystal properties (FTCP)-based synthesizability score. Among the top 1000 systems with the most database entries in Materials Project (MP), more than 500 systems exhibit an attested compound among the top 3 compositions when ranked by the OSP metric. We find that the OSP method shows promising results for certain classes of ternary systems, especially those containing nonmetals, s-block, or transition metals. When applied to the Cu-In-Te ternary system, an interesting system for thermoelectric applications, the OSP method predicted the synthesizability of CuIn$_3$Te$_5$ without prior knowledge, and we have successfully synthesized CuIn$_3$Te$_5$ in experiment. Our method has the potential to accelerate the discovery of novel compounds by providing a guide for experimentalists to easily select the most synthesizable candidates from an arbitrarily large set of possible chemical compositions.

cond-mat.mtrl-sci↗

arXiv2024

Explainable machine learning to enable high-throughput electrical conductivity optimization and discovery of doped conjugated polymers

The combination of high-throughput experimentation techniques and machine learning (ML) has recently ushered in a new era of accelerated material discovery, enabling the identification of materials with cutting-edge properties. However, the measurement of certain physical quantities remains challenging to automate. Specifically, meticulous process control, experimentation and laborious measurements are required to achieve optimal electrical conductivity in doped polymer materials. We propose a ML approach, which relies on readily measured absorbance spectra, to accelerate the workflow associated with measuring electrical conductivity. The classification model accurately classifies samples with a conductivity > 25 to 100 S/cm, achieving a maximum of 100 % accuracy rate. For the subset of highly conductive samples, we employed a regression model to predict their conductivities, yielding an impressive test R2 value of 0.984. We tested the models with samples of the two highest conductivities (498 and 506 S/cm) and showed that they were able to correctly classify and predict the two extrapolative conductivities at satisfactory levels of errors. The proposed ML-assisted workflow results in an improvement in the efficiency of the conductivity measurements by 89 % of the maximum achievable using our experimental techniques. Furthermore, our approach addressed the common challenge of the lack of explainability in ML models by exploiting bespoke mathematical properties of the descriptors and ML model, allowing us to gain corroborated insights into the spectral influences on conductivity. Through this study, we offer an accelerated pathway for optimizing the properties of doped polymer materials while showcasing the valuable insights that can be derived from purposeful utilization of ML in experimental science.

physics.app-ph↗

arXiv2024

WyCryst: Wyckoff Inorganic Crystal Generator Framework

Generative design marks a significant data-driven advancement in the exploration of novel inorganic materials, which entails learning the symmetry equivalent to the crystal structure prediction (CSP) task and subsequent learning of their target properties. Generative models have been developed in the last few years that use custom Variational Autoencoders (VAEs), Generative Adversarial Networks (GANs), and diffusion models. While periodicity and global Euclidian symmetry in three dimensions through translations, rotations and reflections have recently been accounted for, symmetry constraints within allowed space groups have not. This is especially important because the final step involves energy relaxation on the generated crystal structures to find the relaxed crystal structure, typically using Density Functional Theory (DFT). To address this explicitly, we introduce a generative design framework (WyCryst), composed of three pivotal components: 1) a Wyckoff position based inorganic crystal representation, 2) a property-directed VAE model and 3) an automated DFT workflow for structure refinement. Our model selectively generates materials that follow the ground truth of unit cell space group symmetry by encoding the Wyckoff representation for each space group. We successfully reproduce a variety of existing materials: CaTiO3 (space group, SG No. 62 and 221), CsPbI3 (SG No. 221), BaTiO3 (SG No. 160), and CuInS2 (SG No.122) for both ground state as well as polymorphic structure predictions. We also generate several new ternary materials not found in the inorganic materials database (Materials Project), which are proved to be stable, retaining their symmetry, and we also check their phonon stability, using our automated DFT workflow highlighting the validity of our approach. We believe our symmetry-aware WyCryst takes a vital step towards AI-driven inorganic materials discovery.

cond-mat.mtrl-sci↗

arXiv2023

Constructing Custom Thermodynamics Using Deep Learning

One of the most exciting applications of artificial intelligence (AI) is automated scientific discovery based on previously amassed data, coupled with restrictions provided by known physical principles, including symmetries and conservation laws. Such automated hypothesis creation and verification can assist scientists in studying complex phenomena, where traditional physical intuition may fail. Here we develop a platform based on a generalized Onsager principle to learn macroscopic dynamical descriptions of arbitrary stochastic dissipative systems directly from observations of their microscopic trajectories. Our method simultaneously constructs reduced thermodynamic coordinates and interprets the dynamics on these coordinates. We demonstrate its effectiveness by studying theoretically and validating experimentally the stretching of long polymer chains in an externally applied field. Specifically, we learn three interpretable thermodynamic coordinates and build a dynamical landscape of polymer stretching, including the identification of stable and transition states and the control of the stretching rate. Our general methodology can be used to address a wide range of scientific and technological applications.

cond-mat.soft↗

arXiv2023

Reply to: Mobility overestimation in MoS$_2$ transistors due to invasive voltage probes

In this reply, we include new experimental results and verify that the observed non-linearity in rippled-MoS$_2$ (leading to mobility kink) is an intrinsic property of a disordered system, rather than contact effects (invasive probes) or other device issues. Noting that Peng Wu's hypothesis is based on a highly ordered ideal system, transfer curves are expected to be linear, and the carrier density is assumed be constant. Wu's model is therefore oversimplified for disordered systems and neglects carrier-density dependent scattering physics. Thus, it is fundamentally incompatible with our rippled-MoS$_2$, and leads to the wrong conclusion.

cond-mat.mtrl-sci↗

arXiv2023

Automated Electrokinetic Stretcher for Manipulating Nanomaterials

In this work, we present an automated platform for trapping and stretching individual micro- and nanoscale objects in solution using electrokinetic forces. The platform can trap objects at the stagnation point of a planar elongational electrokinetic field for long time scales, as demonstrated by the trapping of ~100 nanometer polystyrene beads and DNA molecules for minutes, with a standard deviation in displacement from the trap center < 1 micrometer. This capability enables the stretching of deformable nanoscale objects in a high-throughput fashion, as illustrated by the stretching of more than 400 DNA molecules within ~4 hours. The flexibility of the electrokinetic stretcher opens up numerous possibilities for contact-free manipulation, with size-based sorting of DNA molecules performed as an example. The platform described provides an automated, high-throughput method to track and manipulate objects for real-time studies of micro- and nanoscale systems.

physics.ins-det↗

arXiv2021

An invertible crystallographic representation for general inverse design of inorganic crystals with targeted properties

Realizing general inverse design could greatly accelerate the discovery of new materials with user-defined properties. However, state-of-the-art generative models tend to be limited to a specific composition or crystal structure. Herein, we present a framework capable of general inverse design (not limited to a given set of elements or crystal structures), featuring a generalized invertible representation that encodes crystals in both real and reciprocal space, and a property-structured latent space from a variational autoencoder (VAE). In three design cases, the framework generates 142 new crystals with user-defined formation energies, bandgap, thermoelectric (TE) power factor, and combinations thereof. These generated crystals, absent in the training database, are validated by first-principles calculations. The success rates (number of first-principles-validated target-satisfying crystals/number of designed crystals) ranges between 7.1% and 38.9%. These results represent a significant step toward property-driven general inverse design using generative models, although practical challenges remain when coupled with experimental synthesis.

physics.comp-ph↗

arXiv2021

Accelerated automated screening of viscous graphene suspensions with various surfactants for optimal electrical conductivity

Functional composite thin films have a wide variety of applications in flexible and/or electronic devices, telecommunications and multifunctional emerging coatings. Rapid screening of their properties is a challenging task, especially with multiple components defining the targeted properties. In this work we present a manifold for accelerated automated screening of viscous graphene suspensions for optimal electrical conductivity. Using Opentrons OT2 robotic auto-pipettor, we tested 3 most industrially significant surfactants - PVP, SDS and T80 - by fabricating 288 samples of graphene suspensions in aqueous hydroxypropylmethylcellulose. Enabled by our custom motorized 4-point probe measurement setup and computer vision algorithms, we then measured electrical conductivity of every sample using custom and identified that the highest performance is achieved for PVP-based samples, peaking at 10.4 mS/cm. The automation of the experimental procedure allowed us to perform majority of the experiments using robots, while involvement of human researcher was kept to minimum. Overall the experiment was completed in less than 18 hours, only 3 of which involved humans.

physics.app-ph↗

arXiv2021

Benchmarking the Performance of Bayesian Optimization across Multiple Experimental Materials Science Domains

In the field of machine learning (ML) for materials optimization, active learning algorithms, such as Bayesian Optimization (BO), have been leveraged for guiding autonomous and high-throughput experimentation systems. However, very few studies have evaluated the efficiency of BO as a general optimization algorithm across a broad range of experimental materials science domains. In this work, we evaluate the performance of BO algorithms with a collection of surrogate model and acquisition function pairs across five diverse experimental materials systems, namely carbon nanotube polymer blends, silver nanoparticles, lead-halide perovskites, as well as additively manufactured polymer structures and shapes. By defining acceleration and enhancement metrics for general materials optimization objectives, we find that for surrogate model selection, Gaussian Process (GP) with anisotropic kernels (automatic relevance detection, ARD) and Random Forests (RF) have comparable performance and both outperform the commonly used GP without ARD. We discuss the implicit distributional assumptions of RF and GP, and the benefits of using GP with anisotropic kernels in detail. We provide practical insights for experimentalists on surrogate model selection of BO during materials optimization campaigns.

cond-mat.mtrl-sci↗

arXiv2021

Electronic transport descriptors for the rapid screening of thermoelectric materials

The discovery of novel materials for thermoelectric energy conversion has potential to be accelerated by data-driven screening combined with high-throughput calculations. One way to increase the efficacy of successfully choosing a candidate material is through its evaluation using transport descriptors. Using a data-driven screening, we selected 12 potential candidates in the trigonal ABX2 family, followed by charge transport property simulations from first principles. The results suggest that carrier scattering processes in these materials are dominated by ionised impurities and polar optical phonons, contrary to the oft-assumed acoustic-phonon-dominated scattering. Combined with calculations of thermal conductivity based on three-phonon scattering, we predict p-type AgBiS2 and TlBiTe2 as potential high-performance thermoelectrics in the intermediate temperature range for low grade waste heat harvesting, with a predicted zT above 1 at 500 K. Using these data, we further derive ground-state transport descriptors for the carrier mobility and the thermoelectric power factor. In addition to low carrier mass, high dielectric constant was found to be an important factor towards high carrier mobility. A quadratic correlation between dielectric constant and transport performance was established and further validated with literature. Looking ahead, dielectric constant can potentially be exploited as an independent tuning knob for improving the thermoelectric performance.

cond-mat.mtrl-sci↗

arXiv2020

Machine learning and high-throughput robust design of P3HT-CNT composite thin films for high electrical conductivity

Combining high-throughput experiments with machine learning allows quick optimization of parameter spaces towards achieving target properties. In this study, we demonstrate that machine learning, combined with multi-labeled datasets, can additionally be used for scientific understanding and hypothesis testing. We introduce an automated flow system with high-throughput drop-casting for thin film preparation, followed by fast characterization of optical and electrical properties, with the capability to complete one cycle of learning of fully labeled ~160 samples in a single day. We combine regio-regular poly-3-hexylthiophene with various carbon nanotubes to achieve electrical conductivities as high as 1200 S/cm. Interestingly, a non-intuitive local optimum emerges when 10% of double-walled carbon nanotubes are added with long single wall carbon nanotubes, where the conductivity is seen to be as high as 700 S/cm, which we subsequently explain with high fidelity optical characterization. Employing dataset resampling strategies and graph-based regressions allows us to account for experimental cost and uncertainty estimation of correlated multi-outputs, and supports the proving of the hypothesis linking charge delocalization to electrical conductivity. We therefore present a robust machine-learning driven high-throughput experimental scheme that can be applied to optimize and understand properties of composites, or hybrid organic-inorganic materials.

physics.app-ph↗

arXiv2020

Efficacious symmetry-adapted atomic displacement method for lattice dynamical studies

Small displacement methods have been successfully used to calculate the lattice dynamical properties of crystals. It involves displacing atoms by a small amount in order to calculate the induced forces on all atoms in a supercell for the computation of force constants. Even though these methods are widely in use, to our knowledge, there is no systematic discussion of optimal displacement directions from the crystal's symmetry point of view nor a rigorous error analysis of such methods. Based on the group theory and point group symmetry of a crystal, we propose displacement directions, with an equivalent concept of the group of $k$, deduced directly in the Cartesian coordinates rather than the usual fractional coordinates, that maintain the theoretical maximum for the triple product $V$ spanned by the three displacements to avoid possible severe roundoff errors. The proposed displacement directions are generated from a minimal set of irreducible atomic displacements that keep the required independent force calculations to a minimum. We find the error in the calculated force constant explicitly depends on the inverse of $V$ and inaccuracy of the forces. Test systems such as Si, graphene, and orthorhombic Sb2S3 are used to illustrate the method. Our displacement method is shown to be very robust in treating low-symmetry cells with a large `aspect ratio' due to huge differences in lattice parameters, use of a large vacuum height, or a very oblique unit cell due to unconventional choice of primitive lattice vectors. It is expected that our displacement strategy can be used to address higher-order interatomic interactions to achieve good accuracy and efficiency.

cond-mat.mtrl-sci↗

arXiv2020

Machine-learning assisted cross-domain prediction of ionic conductivity in sodium and lithium-based superionic conductors

Solid state lithium- and sodium-ion batteries utilize solid ionicly conducting compounds as electrolytes. However, the ionic conductivity of such materials tends to be lower than their liquid counterparts, necessitating research efforts into finding suitable alternatives. The process of electrolyte screening is often based on a mixture of domain expertise and trial-and-error, both of which are time and resource-intensive. Data-driven and machine learning approaches have recently come to the fore to accelerate learnings towards discovery. In this work, we present a simple machine-learning based approach to predict the ionic conductivity of sodium and lithium-based SICON compounds. Using primarily theoretical elemental feature descriptors derivable from tabulated information on the unit cell and the atomic properties of the components of a target compound on a limited dataset of 70 NASICON-examples, we have designed a logistic regression-based model capable of distinguishing between poor and good superionic conductors with a cross-validation accuracy of over 82%. Moreover, we demonstrate how such a system is capable of cross-domain classification on lithium-based examples at the same accuracy, despite being introduced to zero lithium-based compounds during training. Through a systematic permutation-based evaluation process, we reduced the number of considered features from 47 to 7, reduction of over 83%, while simultaneously improving model performance. The contributions of different electronic and structural features to overall ionic conductivity is also discussed, and contrasted with accepted theories in literature. Our results demonstrate the utility of such a simple, yet interpretable tool provides opportunities for initial screening of potential candidates as solid-state electrolytes through the use of existing data.

cond-mat.mtrl-sci↗

arXiv2019

Hassle-free Approach to Thermal Transport Measurements Using Spatial-Temporal Temperature Data

Nanoscale engineering and novel materials have created interesting effects in thermal transport. Thermal conductivity can now be different due to physical and heating sizes. Also, highly anisotropic thermal conductivity can result from unique material composition and geometries. Various experimental methods have been developed to measure these thermal conductivity variations. All of them require varying the physical size of the sample, the heating size or relative positions between heating and detection. Here, we numerically propose a time-domain optical method that uses spatial temporal temperature data to resolve anisotropic and size-dependent thermal conductivity. Our method is hassle-free as it does not vary any experimental parameters and is easily compatible with various methods of measuring temperature in the time domain. This technique can high throughput screening of thermal properties for nanoengineered and novel materials in thermal transport. Also, this technique can be used to identify novel effects in thermal transport within a single experiment.

cond-mat.mtrl-sci↗

arXiv2019

Machine Learning for Novel Thermal-Materials Discovery: Early Successes, Opportunities, and Challenges

High-throughput computational and experimental design of materials aided by machine learning have become an increasingly important field in material science. This area of research has emerged in leaps and bounds in the thermal sciences, in part due to the advances in computational and experimental methods in obtaining thermal properties of materials. In this paper, we provide a current overview of some of the recent work and highlight the challenges and opportunities that are ahead of us in this field. In particular, we focus on the use of machine learning and high-throughput methods for screening of thermal conductivity for compounds, composites and alloys as well as interfacial thermal conductance. These new tools have brought about a feedback mechanism for understanding new correlations and identifying new descriptors, speeding up the discovery of novel thermal functional materials.

cond-mat.mtrl-sci↗

arXiv2019

Kondo Impurities in Two Dimensional MoS2 for Achieving Ultrahigh Thermoelectric Powerfactor

Local magnetic impurities arising from atomic vacancies in two-dimensional (2D) nanosheets are predicted to have a profound effect on charge transport due to resonant scattering, and provide a handle for enhancing thermoelectric properties through the Kondo effect. However, the effects of these impurities are often masked by external fluctuations and turbostratic interfaces, therefore, it is highly challenging to probe the correlation between magnetic impurities and thermoelectric parameters experimentally. In this work, we demonstrate that by placing Molybdenum Disulfide on a hexagonal Boron Nitride substrate, a colossal spin splitting of the conduction sub-band up to ~50.0 meV is observed at the sulfur vacancies, suggesting that these are local magnetic states. Transport measurements reveal a large anomalous positive Seebeck coefficient in highly conducting n type MoS2, originating from quasiparticle resonance near the Fermi level described by the Kondo effect. Furthermore, by tuning the chemical potential, a record power factor of 50mW/mK2 in low-dimensional materials was achieved. Our work shows that defect engineering of 2D materials affords a strategy for controlling Kondo impurities and tuning thermoelectric transport.

cond-mat.mes-hall↗

arXiv2018

Predicting thermoelectric properties from crystal graphs and material descriptors - first application for functional materials

We introduce the use of Crystal Graph Convolutional Neural Networks (CGCNN), Fully Connected Neural Networks (FCNN) and XGBoost to predict thermoelectric properties. The dataset for the CGCNN is independent of Density Functional Theory (DFT) and only relies on the crystal and atomic information, while that for the FCNN is based on a rich attribute list mined from Materialsproject.org. The results show that the optimized FCNN is three layer deep and is able to predict the scattering-time independent thermoelectric powerfactor much better than the CGCNN (or XGBoost), suggesting that bonding and density of states descriptors informed from materials science knowledge obtained partially from DFT are vital to predict functional properties.

physics.comp-ph↗

arXiv2018

Graph Convolutional Neural Networks for Polymers Property Prediction

A fast and accurate predictive tool for polymer properties is demanding and will pave the way to iterative inverse design. In this work, we apply graph convolutional neural networks (GCNN) to predict the dielectric constant and energy bandgap of polymers. Using density functional theory (DFT) calculated properties as the ground truth, GCNN can achieve remarkable agreement with DFT results. Moreover, we show that GCNN outperforms other machine learning algorithms. Our work proves that GCNN relies only on morphological data of polymers and removes the requirement for complicated hand-crafted descriptors, while still offering accuracy in fast predictions.

cond-mat.mtrl-sci↗