arXiv subjects

Kenneth E. Goodson

Publications and source records attributed to Kenneth E. Goodson.

14 recordsLinked to original sources

arXiv2023

Non-volatile electrically programmable integrated photonics with a 5-bit operation

Scalable programmable photonic integrated circuits (PICs) can potentially transform the current state of classical and quantum optical information processing. However, traditional means of programming, including thermo-optic, free carrier dispersion, and Pockels effect result in either large device footprints or high static energy consumptions, significantly limiting their scalability. While chalcogenide-based non-volatile phase-change materials (PCMs) could mitigate these problems thanks to their strong index modulation and zero static power consumption, they often suffer from large absorptive loss, low cyclability, and lack of multilevel operation. Here, we report a wide-bandgap PCM antimony sulfide (Sb2S3)-clad silicon photonic platform simultaneously achieving low loss, high cyclability, and 5-bit operation. We switch Sb2S3 via an on-chip silicon PIN diode heater and demonstrate components with low insertion loss (<1.0 dB), high extinction ratio (>10 dB), and high endurance (>1,600 switching events). Remarkably, we find that Sb2S3 can be programmed into fine intermediate states by applying identical and thermally isolated pulses, providing a unique approach to controllable multilevel operation. Through dynamic pulse control, we achieve on-demand and accurate 5-bit (32 levels) operations, rendering 0.50 +- 0.16 dB contrast per step. Using this multilevel behavior, we further trim random phase error in a balanced Mach-Zehnder interferometer. Our work opens an attractive pathway toward non-volatile large-scale programmable PICs with low-loss and on-demand multi-bit operations.

physics.optics↗

arXiv2021

Uncovering Thermal and Electrical Properties of Sb2Te3/GeTe Superlattice Films

Superlattice-like phase change memory (SL-PCM) promises lower switching current than conventional PCM based on Ge2Sb2Te5 (GST). However, a fundamental understanding of SL-PCM requires detailed characterization of the interfaces within such a SL. Here, we explore the electrical and thermal transport of SLs with deposited Sb2Te3 and GeTe alternating layers of various thicknesses. We find up to ~4X reduction of the effective cross-plane thermal conductivity of the SL stack (as-deposited polycrystalline) compared to polycrystalline GST (as-deposited amorphous and later annealed) due to the thermal interface resistances within the SL. Thermal measurements with varying periods of our SLs show a signature of phonon coherence with a transition from wave-like to particle-like phonon transport, further described by our modeling. Electrical resistivity measurements of such SLs reveal strong anisotropy (~2000X) between the in-plane and cross-plane directions due to the weakly interacting van der Waals gaps. This work uncovers electro-thermal transport in SLs based on Sb2Te3 and GeTe, for improved design of low-power PCM.

cond-mat.mtrl-sci↗

arXiv2021

Engineering thermal transport across layered graphene-MoS2 superlattices

Layering two-dimensional van der Waals materials provides unprecedented control over atomic placement, which could enable tailoring of vibrational spectra and heat flow at the sub-nanometer scale. Here, using spatially-resolved ultrafast thermoreflectance and spectroscopy, we uncover the design rules governing cross-plane heat transport in superlattices assembled from monolayers of graphene (G) and MoS2 (M). Using a combinatorial experimental approach, we probe nine different stacking sequences: G, GG, MG, GGG, GMG, GGMG, GMGG, GMMG, GMGMG and identify the effects of vibrational mismatch, interlayer adhesion, and junction asymmetry on thermal transport. Pure G sequences display signatures of quasi-ballistic transport, whereas adding even a single M layer strongly disrupts heat conduction. The experimental data are described well by molecular dynamics simulations which include thermal expansion, accounting for the effect of finite temperature on the interlayer spacing. The simulations show that a change of only 1.5% in the layer separation can lead to a nearly 100% increase of the thermal resistance. Using these design rules, we experimentally demonstrate a 5-layer GMGMG superlattice with an ultralow effective cross-plane thermal conductivity comparable to air, paving the way for a new class of thermal metamaterials with extreme properties.

cond-mat.mes-hall↗

arXiv2020

Graphene-Based Electromechanical Thermal Switches

Thermal management is an important challenge in modern electronics, avionics, automotive, and energy storage systems. While passive thermal solutions (like heat sinks or heat spreaders) are often used, actively modulating heat flow (e.g. via thermal switches or diodes) would offer additional degrees of control over the management of thermal transients and system reliability. Here we report the first thermal switch based on a flexible, collapsible graphene membrane, with low operating voltage, < 2 V. We also employ active-mode scanning thermal microscopy (SThM) to measure the device behavior and switching in real time. A compact analytical thermal model is developed for the general case of a thermal switch based on a double-clamped suspended membrane, highlighting the thermal and electrical design challenges. System-level modeling demonstrates the thermal trade-offs between modulating temperature swing and average temperature as a function of switching ratio. These graphene-based thermal switches present new opportunities for active control of fast (even nanosecond) thermal transients in densely integrated systems.

cond-mat.mtrl-sci↗

arXiv2020

Temperature Dependent Thermal Boundary Conductance of Monolayer MoS$_2$ by Raman Thermometry

The electrical and thermal behavior of nanoscale devices based on two-dimensional (2D) materials is often limited by their contacts and interfaces. Here we report the temperature-dependent thermal boundary conductance (TBC) of monolayer MoS$_2$ with AlN and SiO$_2$, using Raman thermometry with laser-induced heating. The temperature-dependent optical absorption of the 2D material is crucial in such experiments, which we characterize here for the first time above room temperature. We obtain TBC ~ 15 MWm$^-$$^2$K$^-$$^1$ near room temperature, increasing as ~ T$^0$$^.$$^6$$^5$ in the range 300 - 600 K. The similar TBC of MoS$_2$ with the two substrates indicates that MoS$_2$ is the "softer" material with weaker phonon irradiance, and the relatively low TBC signifies that such interfaces present a key bottleneck in energy dissipation from 2D devices. Our approach is needed to correctly perform Raman thermometry of 2D materials, and our findings are key for understanding energy coupling at the nanoscale.

cond-mat.mes-hall↗

arXiv2019

Thermal conductivity of crystalline AlN and the influence of atomic-scale defects

Aluminum nitride (AlN) plays a key role in modern power electronics and deep-ultraviolet photonics, where an understanding of its thermal properties is essential. Here we measure the thermal conductivity of crystalline AlN by the 3$ω$ method, finding it ranges from 674 ${\pm}$ 56 W/m/K at 100 K to 186 ${\pm}$ 7 W/m/K at 400 K, with a value of 237 ${\pm}$ 6 W/m/K at room temperature. We compare these data with analytical models and first principles calculations, taking into account atomic-scale defects (O, Si, C impurities, and Al vacancies). We find Al vacancies play the greatest role in reducing thermal conductivity because of the largest mass-difference scattering. Modeling also reveals that 10% of heat conduction is contributed by phonons with long mean free paths, over ~7 $μ$m at room temperature, and 50% by phonons with MFPs over ~0.3 $μ$m. Consequently, the effective thermal conductivity of AlN is strongly reduced in sub-micron thin films or devices due to phonon-boundary scattering.

cond-mat.mtrl-sci↗

arXiv2019

Phase change dynamics and 2-dimensional 4-bit memory in Ge2Sb2Te5 via telecom-band encoding

As modern computing gets continuously pushed up against the von Neumann Bottleneck -- limiting the ultimate speeds for data transfer and computation -- new computing methods are needed in order to bypass this issue and keep our computer's evolution moving forward, such as hybrid computing with an optical co-processor, all-optical computing, or photonic neuromorphic computing. In any of these protocols, we require an optical memory: either a multilevel/accumulator memory, or a computational memory. Here, we propose and demonstrate a 2-dimensional 4-bit fully optical non-volatile memory using Ge2Sb2Te5 (GST) phase change materials, with encoding via a 1550 nm laser. Using the telecom-band laser, we are able to reach deeper into the material due to the low-loss nature of GST at this wavelength range, hence increasing the number of optical write/read levels compared to previous demonstrations, while simultaneously staying within acceptable read/write energies. We verify our design and experimental results via rigorous numerical simulations based on finite element and nucleation theory, and we successfully write and read a string of characters using direct hexadecimal encoding.

physics.app-ph↗

arXiv2019

Strongly Tunable Anisotropic Thermal Transport in MoS2 by Strain and Lithium Intercalation: First--Principles Calculations

The possibility of tuning the vibrational properties and the thermal conductivity of layered van der Waals materials either chemically or mechanically paves the way to significant advances in nanoscale heat management. Using first-principles calculations we investigate the modulation of heat transport in MoS2 by lithium intercalation and cross-plane strain. We find that both the in-plane and cross-plane thermal conductivity (kr, kz) of MoS2 are extremely sensitive to both strain and electrochemical intercalation. Combining lithium intercalation and strain, the in-plane and cross-plane thermal conductivity can be tuned over one and two orders of magnitude, respectively. Furthermore, since kr and kz respond in different ways to intercalation and strain, the thermal conductivity anisotropy can be modulated by two orders of magnitude. The underlying mechanisms for such large tunability of the anisotropic thermal conductivity of \Mos are explored by computing and analyzing the dispersion relations, group velocities, relaxation times and mean free paths of phonons. Since both intercalation and strain can be applied reversibly, their stark effect on thermal conductivity can be exploited to design novel phononic devices, as well as for thermal management in MoS2-based electronic and optoelectronic systems.

cond-mat.mtrl-sci↗

arXiv2019

Quasi-ballistic thermal transport across MoS$_2$ thin films

Layered two-dimensional (2D) materials have highly anisotropic thermal properties between the in-plane and cross-plane directions. In general, it is thought that cross-plane thermal conductivities ($κ_z$) are low, and therefore c-axis phonon mean free paths (MFPs) are small. Here, we measure $κ_z$ across MoS$_2$ films of varying thickness (20 to 240 nm) and uncover evidence of very long c-axis phonon MFPs at room temperature in these layered semiconductors. Experimental data obtained using time-domain thermoreflectance (TDTR) are in good agreement with first-principles density functional theory (DFT). These calculations reveal that ~50% of the heat is carried by phonons with MFP >200 nm, exceeding kinetic theory estimates by nearly two orders of magnitude. Because of quasi-ballistic effects, the $κ_z$ of nanometer thin films of MoS$_2$ scales with their thickness and the volumetric thermal resistance asymptotes to a non-zero value, ~10 m$^{2}$KGW$^{-1}$. This contributes as much as 30% to the total thermal resistance of a 20 nm thick film, the rest being limited by thermal interface resistance with the SiO$_2$ substrate and top-side aluminum transducer. These findings are essential for understanding heat flow across nanometer-thin films of MoS$_2$ for optoelectronic and thermoelectric applications.

cond-mat.mes-hall↗

arXiv2019

An electrochemical thermal transistor

The ability to actively regulate heat flow at the nanoscale could be a game changer for applications in thermal management and energy harvesting. Such a breakthrough could also enable the control of heat flow using thermal circuits, in a manner analogous to electronic circuits. Here we demonstrate switchable thermal transistors with an order of magnitude thermal on/off ratio, based on reversible electrochemical lithium intercalation in MoS2 thin films. We use spatially-resolved time-domain thermoreflectance to map the lithium ion distribution during device operation, and atomic force microscopy to show that the lithiated state correlates with increased thickness and surface roughness. First principles calculations reveal that the thermal conductance modulation is due to phonon scattering by lithium rattler modes, c-axis strain, and stacking disorder. This study lays the foundation for electrochemically-driven nanoscale thermal regulators, and establishes thermal metrology as a useful probe of spatio-temporal intercalant dynamics in nanomaterials.

physics.app-ph↗

arXiv2018

Improving the performance of Ge$_2$Sb$_2$Te$_5$ materials via nickel doping: Towards RF-compatible phase-change devices

High-speed electrical switching of Ge2Sb2Te5 (GST) remains a challenging task due to the large impedance mismatch between the low-conductivity amorphous state and the high-conductivity crystalline state. In this letter, we demonstrate an effective doping scheme using nickel to reduce the resistivity contrast between the amorphous and crystalline states by nearly three orders of magnitude. Most importantly, our results show that doping produces the desired electrical performance without adversely affecting the film's optical properties. The nickel doping level is approximately 2% and the lattice structure remains nearly unchanged when compared with undoped-GST. The refractive indices at amorphous and crystalline states were obtained using ellipsometry which echoes the results from XRD. The material's thermal transport properties are measured using time-domain thermoreflectance (TDTR), showing no change upon doping. The advantages of this doping system will open up new opportunities for designing electrically reconfigurable high speed optical elements in the near-infrared spectrum.

cond-mat.mtrl-sci↗

arXiv2018

Direct Visualization of Thermal Conductivity Suppression Due to Enhanced Phonon Scattering Near Individual Grain Boundaries

Understanding the impact of lattice imperfections on nanoscale thermal transport is crucial for diverse applications ranging from thermal management to energy conversion. Grain boundaries (GBs) are ubiquitous defects in polycrystalline materials, which scatter phonons and reduce thermal conductivity. Historically, their impact on heat conduction has been studied indirectly through spatially-averaged measurements, that provide little information about phonon transport near a single GB. Here, using spatially-resolved time-domain thermoreflectance (TDTR) measurements in combination with electron backscatter diffraction (EBSD), we make localized measurements of thermal conductivity within few μm of individual GBs in boron-doped polycrystalline diamond. We observe strongly suppressed thermal transport near GBs, a reduction in conductivity from ~1000 W/m-K at the center of large grains to ~400 W/m-K in the immediate vicinity of GBs. Furthermore, we show that this reduction in conductivity is measured up to ~10 μm away from a GB. A theoretical model is proposed that captures the local reduction in phonon mean-free-paths due to strongly diffuse phonon scattering at the disordered grain boundaries. Our results provide a new framework for understanding phonon-defect interactions in nanomaterials, with implications for the use of high thermal conductivity polycrystalline materials as heat sinks in electronics thermal management.

cond-mat.mes-hall↗

arXiv2018

The Heat Conduction Renaissance

Some of the most exciting recent advancements in heat conduction physics have been motivated, enabled, or achieved by the thermal management community that ITherm serves so effectively. In this paper we highlight the resulting renaissance in basic heat conduction research, which is linked to cooling challenges from power transistors to portables. Examples include phonon transport and scattering in nanotransistors, engineered high-conductivity composites, modulated conductivity through phase transitions, as well as the surprising transport properties of low-dimensional (1D and 2D) nanomaterials. This work benefits strongly from decades of collaboration and leadership from the semiconductor industry.

physics.app-ph↗

arXiv2017

Enhanced thermal conduction through nanostructured interfaces

Interfaces dominate heat conduction in nanostructured systems, and much work has focused on methods to enhance interfacial conduction. These approaches generally address planar interfaces, where the heat flux vector is everywhere normal to the interface. Here, we explore a nanostructured interface geometry that uses nonplanar features to enhance the effective interfacial conductance beyond what is possible with planar interfaces. This interface consists of interdigitating Al pillars embedded within SiO2 with characteristic feature size ranging from 100 nm to 800 nm. The total sidewall surface area is modulated to highlight the impact of this additional channel by changing the pillar-to-pillar pitch L_P between 1.6 um and 200 nm while maintaining the same Al:SiO2 fill fraction. Using optical pump-probe thermoreflectance measurements, we show that the effective conductance of a ~65 nm thick fin layer monotonically increases with decreasing L_P, and that the conductance for L_P = 200 nm is more than twice the prediction for a layered stack with the same volume ratio and a planar interface. Through a combination of Boltzmann transport modeling and finite element calculations, we explore the impact of the pitch L_P and the pillar aspect ratio on effective thermal conductance. This analysis suggests that the concept of nanostructured interfaces can be extended to interfaces between diffusive and quasi-ballistic media in highly scaled devices. Our work proposes that the controlled texturing of interfaces can facilitate interfacial conduction beyond the planar interface regime, opening new avenues for thermal management at the nanoscale.

cond-mat.mes-hall↗