SearcharxivSearch

arXiv subjects

Kentaro Uno

Publications and source records attributed to Kentaro Uno.

At least 19 recordsLinked to original sources

Distributed Multi Robot Lunar Cargo Transportation via Phase Decomposed Reinforcement Learning

Modular reconfigurable robotic systems provide a scalable solution for cooperative surface operations in future lunar missions. However, cooperative cargo transportation remains challenging due to morphology-dependent topology changes, strong payload-induced coupling, long-horizon decision making, and safety constraints. This paper proposes a phase-decomposed reinforcement learning framework for cooperative cargo transport with distributed robotic units. The task is decomposed into lifting, transportation, and placement, each optimized with a dedicated joint-state policy capturing inter-agent coupling. Centralized training promotes stable convergence, while deployment uses onboard proprioception for control and OptiTrack motion capture for ground-truth evaluation and post-processed metrics. A deterministic phase controller expressed in Markov state representation regulates transitions between stages, and a failure-sensitive synchronization mechanism ensures coordinated progression and safety-aware halting during real-world execution. The framework is evaluated in simulation and through controlled field experiments at a JAXA space exploration test facility. Results demonstrate reliable cooperative transport across all stages in both simulation and hardware experiments.

cs.RO

LIMBERO: A Limbed Climbing Exploration Robot Toward Traveling on Rocky Cliffs

In lunar and planetary exploration, legged robots have attracted significant attention as an alternative to conventional wheeled robots, which struggle to traverse rough and uneven terrain. To enable locomotion over highly irregular and steeply inclined surfaces, limbed climbing robots equipped with grippers on their feet have emerged as a promising solution. In this paper, we present LIMBERO, a 10 kg-class quadrupedal climbing robot that employs spine-type grippers for stable locomotion and climbing on rugged and steep terrain. We first introduce a novel gripper design featuring coupled finger-closing and spine-hooking motions, tightly actuated by a single motor, which achieves exceptional grasping performance (>150 N) despite its lightweight design (525 g). Furthermore, we develop an efficient algorithm to visualize a geometry-based graspability index on continuous rough terrain. Finally, we integrate these components into LIMBERO and demonstrate its ability to ascend steep rocky surfaces under a 1 G gravity condition, a performance not previously achieved yet for limbed climbing robots of this scale.

cs.RO

A Pin-Array Structured Climbing Robot for Stable Locomotion on Steep Rocky Terrain

Climbing robots face significant challenges when navigating unstructured environments, where reliable attachment to irregular surfaces is critical. We present a novel mobile climbing robot equipped with compliant pin-array structured grippers that passively conform to surface irregularities, ensuring stable ground gripping without the need for complicated sensing or control. Each pin features a vertically split design, combining an elastic element with a metal spine to enable mechanical interlocking with microscale surface features. Statistical modeling and experimental validation indicate that variability in individual pin forces and contact numbers are the primary sources of grasping uncertainty. The robot demonstrated robust and stable locomotion in indoor tests on inclined walls (10-30 degrees) and in outdoor tests on natural rocky terrain. This work highlights that a design emphasizing passive compliance and mechanical redundancy provides a practical and robust solution for real-world climbing robots while minimizing control complexity.

cs.RO

A Pin-Array Structure for Gripping and Shape Recognition of Convex and Concave Terrain Profiles

This paper presents a gripper capable of grasping and recognizing terrain shapes for mobile robots in extreme environments. Multi-limbed climbing robots with grippers are effective on rough terrains, such as cliffs and cave walls. However, such robots may fall over by misgrasping the surface or getting stuck owing to the loss of graspable points in unknown natural environments. To overcome these issues, we need a gripper capable of adaptive grasping to irregular terrains, not only for grasping but also for measuring the shape of the terrain surface accurately. We developed a gripper that can grasp both convex and concave terrains and simultaneously measure the terrain shape by introducing a pin-array structure. We demonstrated the mechanism of the gripper and evaluated its grasping and terrain recognition performance using a prototype. Moreover, the proposed pin-array design works well for 3D terrain mapping as well as adaptive grasping for irregular terrains.

cs.RO

Assembling Solar Panels by Dual Robot Arms Towards Full Autonomous Lunar Base Construction

Since the successful Apollo program, humanity is once again aiming to return to the Moon for scientific discovery, resource mining, and inhabitation. Upcoming decades focus on building a lunar outpost, with robotic systems playing a crucial role to safely and efficiently establish essential infrastructure such as solar power generating towers. Similar to the construction of the International Space Station (ISS), shipping necessary components via modules and assembling them in situ should be a practical scenario. In this context, this paper focuses on the integration of vision, control, and hardware systems within an autonomous sequence for a dual-arm robot system. We explore a perception and control pipeline specifically designed for assembling solar panel modules, one of the benchmark tasks. Ad hoc hardware was designed and tested in real-world experiments. A mock-up of modular solar panels and active-passive connectors are employed, with the control of this grappling fixture integrated into the proposed pipeline. The successful implementation of our method demonstrates that the two robot manipulators can effectively connect arbitrarily placed panels, highlighting the seamless integration of vision, control, and hardware systems in complex space applications.

cs.RO

Design and Development of Modular Limbs for Reconfigurable Robots on the Moon

In this paper, we present the development of 4-DOF robot limbs, which we call Moonbots, designed to connect in various configurations with each other and wheel modules, enabling adaptation to different environments and tasks. These modular components are intended primarily for robotic systems in space exploration and construction on the Moon in our Moonshot project. Such modular robots add flexibility and versatility for space missions where resources are constrained. Each module is driven by a common actuator characterized by a high torque-to-speed ratio, supporting both precise control and dynamic motion when required. This unified actuator design simplifies development and maintenance across the different module types. The paper describes the hardware implementation, the mechanical design of the modules, and the overall software architecture used to control and coordinate them. Additionally, we evaluate the control performance of the actuator under various load conditions to characterize its suitability for modular robot applications. To demonstrate the adaptability of the system, we introduce nine functional configurations assembled from the same set of modules: 4DOF-limb, 8DOF-limb, vehicle, dragon, minimal, quadruped, cargo, cargo-minimal, and bike. These configurations reflect different locomotion strategies and task-specific behaviors, offering a practical foundation for further research in reconfigurable robotic systems.

cs.RO

Data-Driven Terramechanics Approach Towards a Realistic Real-Time Simulator for Lunar Rovers

High-fidelity simulators for the lunar surface provide a digital environment for extensive testing of rover operations and mission planning. However, current simulators focus on either visual realism or physical accuracy, which limits their capability to replicate lunar conditions comprehensively. This work addresses that gap by combining high visual fidelity with realistic terrain interaction for a realistic representation of rovers on the lunar surface. Because direct simulation of wheel-soil interactions is computationally expensive, a data-driven approach was adopted, using regression models for slip and sinkage from data collected in both full-rover and single-wheel experiments and simulations. The resulting regression-based terramechanics model accurately reproduced steady-state and dynamic slip, as well as sinkage behavior, on flat terrain and slopes up to 20 degrees, with validation against field test results. Additionally, improvements were made to enhance the realism of terrain deformation and wheel trace visualization. This method supports real-time applications that require physically plausible terrain response alongside high visual fidelity.

cs.RO

Discrete Fourier Transform-based Point Cloud Compression for Efficient SLAM in Featureless Terrain

Simultaneous Localization and Mapping (SLAM) is an essential technology for the efficiency and reliability of unmanned robotic exploration missions. While the onboard computational capability and communication bandwidth are critically limited, the point cloud data handled by SLAM is large in size, attracting attention to data compression methods. To address such a problem, in this paper, we propose a new method for compressing point cloud maps by exploiting the Discrete Fourier Transform (DFT). The proposed technique converts the Digital Elevation Model (DEM) to the frequency-domain 2D image and omits its high-frequency components, focusing on the exploration of gradual terrains such as planets and deserts. Unlike terrains with detailed structures such as artificial environments, high-frequency components contribute little to the representation of gradual terrains. Thus, this method is effective in compressing data size without significant degradation of the point cloud. We evaluated the method in terms of compression rate and accuracy using camera sequences of two terrains with different elevation profiles.

cs.RO

A Sequential Hermaphrodite Coupling Mechanism for Lattice-based Modular Robots

Lattice-based modular robot systems are envisioned for large-scale construction in extreme environments, such as space. Coupling mechanisms for heterogeneous structural modules should meet all of the following requirements: single-sided coupling and decoupling, flat surfaces when uncoupled, and coupling to passive coupling interfaces as well as coupling behavior between coupling mechanisms. The design requirements for such a coupling mechanism are complex. We propose a novel shape-matching mechanical coupling mechanism that satisfies these design requirements. This mechanism enables controlled, sequential transitions between male and female states. When uncoupled, all mechanisms are in the female state. To enable single-sided coupling, one side of the mechanisms switches to the male state during the coupling process. Single-sided decoupling is possible not only from the male side but also from the female side by forcibly switching the opposite mechanism's male state to the female state. This coupling mechanism can be applied to various modular robot systems and robot arm tool changers.

cs.RO

Towards the Automation in the Space Station: Feasibility Study and Ground Tests of a Multi-Limbed Intra-Vehicular Robot

This paper presents a feasibility study, including simulations and prototype tests, on the autonomous operation of a multi-limbed intra-vehicular robot (mobile manipulator), shortly MLIVR, designed to assist astronauts with logistical tasks on the International Space Station (ISS). Astronauts spend significant time on tasks such as preparation, close-out, and the collection and transportation of goods, reducing the time available for critical mission activities. Our study explores the potential for a mobile manipulator to support these operations, emphasizing the need for autonomous functionality to minimize crew and ground operator effort while enabling real-time task execution. We focused on the robot's transportation capabilities, simulating its motion planning in 3D space. The actual motion execution was tested with a prototype on a 2D table to mimic a microgravity environment. The results demonstrate the feasibility of performing these tasks with minimal human intervention, offering a promising solution to enhance operational efficiency on the ISS.

cs.RO

Optimal Trajectory Planning for Orbital Robot Rendezvous and Docking

Approaching a tumbling target safely is a critical challenge in space debris removal missions utilizing robotic manipulators onboard servicing satellites. In this work, we propose a trajectory planning method based on nonlinear optimization for a close-range rendezvous to bring a free-floating, rotating debris object in a two-dimensional plane into the manipulator's workspace, as a preliminary step for its capture. The proposed method introduces a dynamic keep-out sphere that adapts depending on the approach conditions, allowing for closer and safer access to the target. Furthermore, a control strategy is developed to reproduce the optimized trajectory using discrete ON/OFF thrusters, considering practical implementation constraints.

cs.RO

Online Inertia Parameter Estimation for Unknown Objects Grasped by a Manipulator Towards Space Applications

Knowing the inertia parameters of a grasped object is crucial for dynamics-aware manipulation, especially in space robotics with free-floating bases. This work addresses the problem of estimating the inertia parameters of an unknown target object during manipulation. We apply and extend an existing online identification method by incorporating momentum conservation, enabling its use for the floating-base robots. The proposed method is validated through numerical simulations, and the estimated parameters are compared with ground-truth values. Results demonstrate accurate identification in the scenarios, highlighting the method's applicability to on-orbit servicing and other space missions.

cs.RO

MoonBot: Modular and On-Demand Reconfigurable Robot Toward Moon Base Construction

The allure of lunar surface exploration and development has recently captured widespread global attention. Robots have proved to be indispensable for exploring uncharted terrains, uncovering and leveraging local resources, and facilitating the construction of future human habitats. In this article, we introduce the modular and on-demand reconfigurable robot (MoonBot), a modular and reconfigurable robotic system engineered to maximize functionality while operating within the stringent mass constraints of lunar payloads and adapting to varying environmental conditions and task requirements. This article details the design and development of MoonBot and presents a preliminary field demonstration that validates the proof of concept through the execution of milestone tasks simulating the establishment of lunar infrastructure. These tasks include essential civil engineering operations, infrastructural component transportation and deployment, and assistive operations with inflatable modules. Furthermore, we systematically summarize the lessons learned during testing, focusing on the connector design and providing valuable insights for the advancement of modular robotic systems in future lunar missions.

cs.RO

3D Mapping Using a Lightweight and Low-Power Monocular Camera Embedded inside a Gripper of Limbed Climbing Robots

Limbed climbing robots are designed to explore challenging vertical walls, such as the skylights of the Moon and Mars. In such robots, the primary role of a hand-eye camera is to accurately estimate 3D positions of graspable points (i.e., convex terrain surfaces) thanks to its close-up views. While conventional climbing robots often employ RGB-D cameras as hand-eye cameras to facilitate straightforward 3D terrain mapping and graspable point detection, RGB-D cameras are large and consume considerable power. This work presents a 3D terrain mapping system designed for space exploration using limbed climbing robots equipped with a monocular hand-eye camera. Compared to RGB-D cameras, monocular cameras are more lightweight, compact structures, and have lower power consumption. Although monocular SLAM can be used to construct 3D maps, it suffers from scale ambiguity. To address this limitation, we propose a SLAM method that fuses monocular visual constraints with limb forward kinematics. The proposed method jointly estimates time-series gripper poses and the global metric scale of the 3D map based on factor graph optimization. We validate the proposed framework through both physics-based simulations and real-world experiments. The results demonstrate that our framework constructs a metrically scaled 3D terrain map in real-time and enables autonomous grasping of convex terrain surfaces using a monocular hand-eye camera, without relying on RGB-D cameras. Our method contributes to scalable and energy-efficient perception for future space missions involving limbed climbing robots. See the video summary here: https://youtu.be/fMBrrVNKJfc

cs.RO

Designing for Distributed Heterogeneous Modularity: On Software Architecture and Deployment of MoonBots

This paper presents the software architecture and deployment strategy behind the MoonBot platform: a modular space robotic system composed of heterogeneous components distributed across multiple computers, networks and ultimately celestial bodies. We introduce a principled approach to distributed, heterogeneous modularity, extending modular robotics beyond physical reconfiguration to software, communication and orchestration. We detail the architecture of our system that integrates component-based design, a data-oriented communication model using ROS2 and Zenoh, and a deployment orchestrator capable of managing complex multi-module assemblies. These abstractions enable dynamic reconfiguration, decentralized control, and seamless collaboration between numerous operators and modules. At the heart of this system lies our open-source Motion Stack software, validated by months of field deployment with self-assembling robots, inter-robot cooperation, and remote operation. Our architecture tackles the significant hurdles of modular robotics by significantly reducing integration and maintenance overhead, while remaining scalable and robust. Although tested with space in mind, we propose generalizable patterns for designing robotic systems that must scale across time, hardware, teams and operational environments.

cs.RO

Design and Development of a Modular Bucket Drum Excavator for Lunar ISRU

In-Situ Resource Utilization (ISRU) is one of the key technologies for enabling sustainable access to the Moon. The ability to excavate lunar regolith is the first step in making lunar resources accessible and usable. This work presents the development of a bucket drum for the modular robotic system MoonBot, as part of the Japanese Moonshot program. A 3D-printed prototype made of PLA was manufactured to evaluate its efficiency through a series of sandbox tests. The resulting tool weighs 4.8 kg and has a volume of 14.06 L. It is capable of continuous excavation at a rate of 777.54 kg/h with a normalized energy consumption of 0.022 Wh/kg. In batch operation, the excavation rate is 172.02 kg/h with a normalized energy consumption of 0.86 Wh per kilogram of excavated material. The obtained results demonstrate the successful implementation of the concept. A key advantage of the developed tool is its compatibility with the modular MoonBot robotic platform, which enables flexible and efficient mission planning. Further improvements may include the integration of sensors and an autonomous control system to enhance the excavation process.

cs.RO

An Agnostic End-Effector Alignment Controller for Robust Assembly of Modular Space Robots

Modular robots offer reconfigurability and fault tolerance essential for lunar missions, but require controllers that adapt safely to real-world disturbances. We build on our previous hardware-agnostic actuator synchronization in Motion Stack to develop a new controller enforcing adaptive velocity bounds via a dynamic hypersphere clamp. Using only real-time end-effector and target pose measurements, the controller adjusts its translational and rotational speed limits to ensure smooth, stable alignment without abrupt motions. We implemented two variants, a discrete, step-based version and a continuous, velocity-based version, and tested them on two MoonBot limbs in JAXA's lunar environment simulator. Field trials demonstrate that the step-based variant produces highly predictable, low-wobble motions, while the continuous variant converges more quickly and maintains millimeter-level positional accuracy, and both remain robust across limbs with differing mechanical imperfections and sensing noise (e.g., backlash and flex). These results highlight the flexibility and robustness of our robot-agnostic framework for autonomous self-assembly and reconfiguration under harsh conditions.

cs.RO

Multi-Modal Decentralized Reinforcement Learning for Modular Reconfigurable Lunar Robots

Modular reconfigurable robots suit task-specific space operations, but the combinatorial growth of morphologies hinders unified control. We propose a decentralized reinforcement learning (Dec-RL) scheme where each module learns its own policy: wheel modules use Soft Actor-Critic (SAC) for locomotion and 7-DoF limbs use Proximal Policy Optimization (PPO) for steering and manipulation, enabling zero-shot generalization to unseen configurations. In simulation, the steering policy achieved a mean absolute error of 3.63{\deg} between desired and induced angles; the manipulation policy plateaued at 84.6 % success on a target-offset criterion; and the wheel policy cut average motor torque by 95.4 % relative to baseline while maintaining 99.6 % success. Lunar-analogue field tests validated zero-shot integration for autonomous locomotion, steering, and preliminary alignment for reconfiguration. The system transitioned smoothly among synchronous, parallel, and sequential modes for Policy Execution, without idle states or control conflicts, indicating a scalable, reusable, and robust approach for modular lunar robots.

cs.RO