Searcharxiv⌕ Search

arXiv subjects

Kevin Garello

Publications and source records attributed to Kevin Garello.

25 records · Page 2Linked to original sources

Magnetoresistance of heavy and light metal/ferromagnet bilayers

We studied the magnetoresistance of normal metal (NM)/ferromagnet (FM) bilayers in the linear and nonlinear (current-dependent) regimes and compared it with the amplitude of the spin-orbit torques and thermally induced electric fields. Our experiments reveal that the magnetoresistance of the heavy NM/Co bilayers (NM = Ta, W, Pt) is phenomenologically similar to the spin Hall magnetoresistance (SMR) of YIG/Pt, but has a much larger anisotropy, of the order of 0.5%, which increases with the atomic number of the NM. This SMR-like behavior is absent in light NM/Co bilayers (NM = Ti, Cu), which present the standard AMR expected of polycrystalline FM layers. In the Ta, W, Pt/Co bilayers we find an additional magnetoresistance, directly proportional to the current and to the transverse component of the magnetization. This so-called unidirectional SMR, of the order of 0.005%, is largest in W and correlates with the amplitude of the antidamping spin-orbit torque. The unidirectional SMR is below the accuracy of our measurements in YIG/Pt.

cond-mat.mes-hall↗

Unidirectional spin Hall magnetoresistance in ferromagnet/normal metal bilayers

Magnetoresistive effects are usually invariant upon inversion of the magnetization direction. In noncentrosymmetric conductors, however, nonlinear resistive terms can give rise to a current dependence that is quadratic in the applied voltage and linear in the magnetization. Here we demonstrate that such conditions are realized in simple bilayer metal films where the spin-orbit interaction and spin-dependent scattering couple the current-induced spin accumulation to the electrical conductivity. We show that the longitudinal resistance of Ta|Co and Pt|Co bilayers changes when reversing the polarity of the current or the sign of the magnetization. This unidirectional magnetoresistance scales linearly with current density and has opposite sign in Ta and Pt, which we associate with the modification of the interface scattering potential induced by the spin Hall effect in these materials. Our results suggest a route to control the resistance and detect magnetization switching in spintronic devices using a two-terminal geometry, which applies also to heterostructures including topological insulators.

cond-mat.mes-hall↗

Interplay of spin-orbit torque and thermoelectric effects in ferromagnet/normal metal bilayers

We present harmonic transverse voltage measurements of current-induced thermoelectric and spin-orbit torque (SOT) effects in ferromagnet/normal metal bilayers, in which thermal gradients produced by Joule heating and SOT coexist and give rise to ac transverse signals with comparable symmetry and magnitude. Based on the symmetry and field-dependence of the transverse resistance, we develop a consistent method to separate thermoelectric and SOT measurements. By addressing first ferromagnet/light metal bilayers with negligible spin-orbit coupling, we show that in-plane current injection induces a vertical thermal gradient whose sign and magnitude are determined by the resistivity difference and stacking order of the magnetic and nonmagnetic layers. We then study ferromagnet/heavy metal bilayers with strong spin-orbit coupling, showing that second harmonic thermoelectric contributions to the transverse voltage may lead to a significant overestimation of the antidamping SOT. We find that thermoelectric effects are very strong in Ta(6nm)/Co(2.5nm) and negligible in Pt(6nm)/Co(2.5nm) bilayers. After including these effects in the analysis of the transverse voltage, we find that the antidamping SOTs in these bilayers, after normalization to the magnetization volume, are comparable to those found in thinner Co layers with perpendicular magnetization, whereas the field-like SOTs are about an order of magnitude smaller.

cond-mat.mes-hall↗

Ultrafast magnetization switching by spin-orbit torques

Spin-orbit torques induced by spin Hall and interfacial effects in heavy metal/ferromagnetic bilayers allow for a switching geometry based on in-plane current injection. Using this geometry, we demonstrate deterministic magnetization reversal by current pulses ranging from 180~ps to ms in Pt/Co/AlOx dots with lateral dimensions of 90~nm. We characterize the switching probability and critical current $I_c$ as function of pulse length, amplitude, and external field. Our data evidence two distinct regimes: a short-time intrinsic regime, where $I_c$ scales linearly with the inverse of the pulse length, and a long-time thermally assisted regime where $I_c$ varies weakly. Both regimes are consistent with magnetization reversal proceeding by nucleation and fast propagation of domains. We find that $I_c$ is a factor 3-4 smaller compared to a single domain model and that the incubation time is negligibly small, which is a hallmark feature of spin-orbit torques.

cond-mat.mes-hall↗

Fieldlike and antidamping spin-orbit torques in as-grown and annealed Ta/CoFeB/MgO layers

We present a comprehensive study of the current-induced spin-orbit torques in perpendicularly magnetized Ta/CoFeB/MgO layers. The samples were annealed in steps up to 300 degrees C and characterized using x-ray absorption spectroscopy, transmission electron microscopy, resistivity, and Hall effect measurements. By performing adiabatic harmonic Hall voltage measurements, we show that the transverse (field-like) and longitudinal (antidamping-like) spin-orbit torques are composed of constant and magnetization-dependent contributions, both of which vary strongly with annealing. Such variations correlate with changes of the saturation magnetization and magnetic anisotropy and are assigned to chemical and structural modifications of the layers. The relative variation of the constant and anisotropic torque terms as a function of annealing temperature is opposite for the field-like and antidamping torques. Measurements of the switching probability using sub-μs current pulses show that the critical current increases with the magnetic anisotropy of the layers, whereas the switching efficiency, measured as the ratio of magnetic anisotropy energy and pulse energy, decreases. The optimal annealing temperature to achieve maximum magnetic anisotropy, saturation magnetization, and switching efficiency is determined to be between 240 degrees and 270 degrees C.

cond-mat.mes-hall↗

Spin-orbit-torque magnetization switching of a three terminal perpendicular magnetic tunnel junction

We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and the read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density $5\times10^{11}$ A/m$^2$ in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof of concept of a perpendicular spin-orbit torque magnetic memory cell.

cond-mat.mtrl-sci↗

Symmetry and magnitude of spin-orbit torques in ferromagnetic heterostructures

Current-induced spin torques are of great interest to manipulate the orientation of nanomagnets without applying external magnetic fields. They find direct application in non-volatile data storage and logic devices, and provide insight into fundamental processes related to the interdependence between charge and spin transport. Recent demonstrations of magnetization switching induced by in-plane current injection in ferromagnetic heterostructures have drawn attention to a class of spin torques based on orbital-to-spin momentum transfer, which is alternative to pure spin transfer torque (STT) between noncollinear magnetic layers and amenable to more diversified device functions. Due to the limited number of studies, however, there is still no consensus on the symmetry, magnitude, and origin of spin-orbit torques (SOTs). Here we report on the quantitative vector measurement of SOTs in Pt/Co/AlO trilayers using harmonic analysis of the anomalous and planar Hall effects as a function of the applied current and magnetization direction. We provide an all-purpose scheme to measure the amplitude and direction of SOTs for any arbitrary orientation of the magnetization, including corrections due to the interplay of Hall and thermoelectric effects. Based on general space and time inversion symmetry arguments, we show that asymmetric heterostructures allow for two different SOTs having odd and even behavior with respect to magnetization reversal. Our results reveal a scenario that goes beyond established models of the Rashba and spin Hall contributions to SOTs. The even SOT is STT-like but stronger than expected from the spin Hall effect in Pt. The odd SOT is composed of a constant field-like term and an additional component, which is strongly anisotropic and does not correspond to a simple Rashba field.

cond-mat.mes-hall↗