arXiv subjects

Khaled M. Rabie

Publications and source records attributed to Khaled M. Rabie.

31 records · Page 2Linked to original sources

arXiv2020

Reconfigurable Intelligent Surfaces-Enabled Vehicular Networks: A Physical Layer Security Perspective

This paper studies the physical layer security (PLS) of a vehicular network employing reconfigurable intelligent surfaces (RISs). RIS technologies are emerging as an important paradigm for the realisation of next-generation smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated energy source. Inspired by the promising potential of RIS-based transmission, we investigate the PLS of two vehicular network system models: One with vehicle-to-vehicle communication with the source employing a RIS-based access point, and the other is in the form of a vehicular adhoc network (VANET), with a RIS-based relay deployed on a building; both models assume the presence of an eavesdropper. The performance of the proposed systems are evaluated in terms of the average secrecy capacity (ASC) and the secrecy outage probability (SOP). We present accurate analytical expressions for the two performance metrics and study the impact of various system parameters on the overall performance of the two considered system configurations. Monte-Carlo simulations are provided throughout to validate the results. The results show that performance of the system in terms of the ASC and SOP is affected by the location of the RIS-relay as well as the number of RIS cells. Moreover, upto an order magnitude gain could be achieved within certain regions when the number of RIS cells are doubled, clearly indicating the benefit of employing a RIS configuration.

eess.SP↗

arXiv2019

Physical Layer Security in Vehicular Networks with Reconfigurable Intelligent Surfaces

This paper studies the physical layer security (PLS) of a vehicular network employing a reconfigurable intelligent surface (RIS). RIS technologies are emerging as an important paradigm for the realisation of smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated energy source. Inspired by the promising potential of RIS-based transmission, we investigate two vehicular network system models: One with vehicle-to-vehicle communication with the source employing a RIS-based access point, and the other model in the form of a vehicular adhoc network (VANET), with a RIS-based relay deployed on a building. Both models assume the presence of an eavesdropper, to investigate the average secrecy capacity of the considered systems. Monte-Carlo simulations are provided throughout to validate the results. The results show that performance of the system in terms of the secrecy capacity is affected by the location of the RIS-relay and the number of RIS cells. The effect of other system parameters such as source power and eavesdropper distances are also studied.

eess.SP↗

arXiv2019

Reconfigurable Intelligent Surface Enabled IoT Networks in Generalized Fading Channels

This paper studies an Internet-of-Things (IoT) network employing a reconfigurable intelligent surface (RIS) over generalized fading channels. Inspired by the promising potential of RIS-based transmission, we investigate a RIS-enabled IoT network with the source node employing a RIS-based access point. The system is modelled with reference to a receiver transmitter pair and the Fisher-Snedecor F model is adopted to analyse the composite fading and shadowing channel. Closed-form expressions are derived for the system with regards to the average capacity, average bit error rate (BER) and outage probability. Monte-Carlo simulations are provided throughout to validate the results. The results investigated and reported in this study extend early results reported in the emerging literature on RIS-enabled technologies and provides a framework for the evaluation of a basic RIS-enabled IoT network over the most common multipath fading channels. The results indicate the clear benefit of employing a RIS-enabled access point, as well as the versatility of the derived expressions in analysing the effects of fading and shadowing on the network. The results further demonstrate that for a RIS-enabled IoT network, there is the need to balance between the cost and benefit of increasing the RIS cells against other parameters such as increasing transmit power, especially at low SNR and/or high to moderate fading/shadowing severity.

eess.SP↗

arXiv2019

Physical Layer Security in Vehicular Communication Networks in the Presence of Interference

This paper studies the physical layer security of a vehicular communication network in the presence of interference constraints by analysing its secrecy capacity. The system considers a legitimate receiver node and an eavesdropper node, within a shared network, both under the effect of interference from other users. The double-Rayleigh fading channel is used to capture the effects of the wireless communication channel for the vehicular network. We present the standard logarithmic expression for the system capacity in an alternate form, to facilitate analysis in terms of the joint moment generating functions (MGF) of the random variables representing the channel fading and interference. Closed-form expressions for the MGFs are obtained and Monte-Carlo simulations are provided throughout to validate the results. The results show that performance of the system in terms of the secrecy capacity is affected by the number of interferers and their distances. The results further demonstrate the effect of the uncertainty in eavesdropper location on the analysis.

eess.SP↗

arXiv2018

On the Performance of DF-based Power-Line/Visible-Light Communication Systems

This paper presents a comprehensive performance analysis of an integrated indoor power line communication (PLC)/visible light communication (VLC) system with the presence of a decode-and-forward (DF) relay. The existing indoor power line networks are used as the backbone for VLCs. The performance of the proposed system is evaluated in terms of the average capacity and the outage probability. A new unified mathematical method is developed for the PLC/VLC system and analytical expressions for the aforementioned performance metrics are derived. Monte Carlo simulations are provided throughout the paper to verify the correctness of the analysis. The results reveal that the performance of the proposed system deteriorates with increasing the end-to-end distance and improves with increasing the relay transmit power. It is also shown that the outage probability of the system under consideration is negatively affected by the vertical distance to user plane.

eess.SP↗

arXiv2018

Outage Probability of the EH-based Full-Duplex AF and DF Relaying Systems in α-μEnvironment

Wireless power transfer and energy harvesting have attracted a significant research attention in terms of their application in cooperative relaying systems. Most of existing works in this field focus on the half-duplex (HD) relaying mechanism over certain fading channels, however, in contrast, this paper considers a dual-hop full-duplex (FD) relaying system over a generalized independent but not identically distributed α-μfading channel, where the relay node is energy-constrained and entirely depends on the energy signal from the source node. Three special cases of the α-μmodel are investigated, namely, Rayleigh, Nakagami-m and Weibull fading. As the system performance, we investigate the outage probability (OP) for which we derive exact unified closed-form expressions. The provided Monte Carlo simulations validate the accuracy of our analysis. Moreover, the results obtained for the FD scenario are compared to the ones related to the HD. The results demonstrate that the decode-andforward relaying outperforms the amplify-and-forward relaying for both HD and FD scenarios. It is also shown that the FD scenario performs better than the HD relaying systems. Finally, we analyzed the impact of the fading parameters αand μon the achievable OP.

eess.SP↗

arXiv2018

Performance Evaluation of Multi-hop Relaying over Non-Gaussian PLC Channels

Relaying over power line communication (PLC) channels can considerably enhance the performance and reliability of PLC systems. This paper is dedicated to study and analyze the energy efficiency of multi-hop cooperative relaying PLC systems. Incremental decode-and-forward (IDF) relying is exploited to reduce the transmit power consumption. The PLC channel is assumed to experience log-normal fading with impulsive noise. The performances of single-hop and conventional DF relaying systems are also analyzed in terms of outage probability and energy efficiency for which analytical expressions are derived. Results show that using more relays can improve the outage probability performance; however, this is achieved at the expense of increased power consumption due to the increased static power of the relays, especially when the total source-to-destination distance is relatively small. Results also demonstrate that the IDF PLC system has better energy efficiency performance compared to the other schemes.

eess.SP↗

arXiv2018

Performance Analysis of Integrated Power-Line/Visible-Light Communication Systems with AF Relaying

Reliable data transmissions and offering better mobility to the end user can be achieved by integrating different communication systems. In this paper, we investigate the performance of a cascaded indoor power line communication (PLC)/visible light communication (VLC) system with the presence of an amplify-and-forward (AF) relay. Using the pre-installed infrastructure of electricity wiring networks gives the advantage to use PLC as a backbone for VLCs. The performance of the proposed hybrid system is discussed in terms of the average capacity. A mathematical method is developed for this network to formulate the capacity by exploiting the statistical properties of both the PLC and VLC channels. The derived analytical expressions are validated by Monte Carlo simulations. The results showed that there is a considerable improvement in the performance of the hybrid system as the relay gain increases whereas it deteriorates with increasing the end-to-end distance. A comparison between the performance of a parallel hybrid/PLC and hybrid systems is also provided. It is found that the hybrid/PLC system outperforms the hybrid one. However, the user mobility offered by the latter system remains the main advantage over the former approach.

eess.SP↗

arXiv2018

Half-Duplex and Full-Duplex AF and DF Relaying with Energy-Harvesting in Log-Normal Fading

Energy-harvesting (EH) and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels, which represent outdoor environments. In contrast, this paper is dedicated to analyze the performance of dual-hop relaying systems with EH over indoor channels characterized by log-normal fading. Both half-duplex (HD) and full-duplex (FD) relaying mechanisms are studied in this work with decode-and-forward (DF) and amplify-and-forward (AF) relaying protocols. In addition, three EH schemes are investigated, namely, time switching relaying, power splitting relaying and ideal relaying receiver which serves as a lower bound. The system performance is evaluated in terms of the ergodic outage probability for which we derive accurate analytical expressions. Monte Carlo simulations are provided throughout to validate the accuracy of our analysis. Results reveal that, in both HD and FD scenarios, AF relaying performs only slightly worse than DF relaying which can make the former a more efficient solution when the processing energy cost at the DF relay is taken into account. It is also shown that FD relaying systems can generally outperform HD relaying schemes as long as the loop-back interference in FD is relatively small. Furthermore, increasing the variance of the log-normal channel has shown to deteriorate the performance in all the relaying and EH protocols considered.

eess.SP↗

arXiv2018

Hybrid Power-Line/Wireless Communication Systems For Indoor Applications

The high attenuation which increases as frequency increases in power line communication systems (PLC) makes achieving and sustaining high data rates over such channels a challenging task. In most communication systems, relays are normally deployed to overcome the effect of signal attenuation and to achieve reliable transmissions between users. Amplifyand- forward (AF) and decode-and-forward (DF) relays are often used. In contrast to the existing work on this topic which advocate utilizing relays either between PLC links or between wireless links, the authors of this paper focus on using AF relaying for in-home PLC and wireless systems where one PLC user wants to share data with one wireless user which has no access to the PLC network. We refer to this system as the Hybrid approach. A mathematical method is developed for this network to formulate the capacity of the system by exploiting the statistical properties of both PLC and wireless channels. Monte Carlo simulations are used throughout this paper to validate the analytical results. The impact of several system parameters is investigated in this paper. For the sake of comparison, we also provide the performance analysis and results for a PLC only network. The results showed that the performance of the hybrid system enhances as we increase the relay gain and deteriorates as the end-to-end distance increases. It is also found that the PLC only scheme may outperform the hybrid one if the relay gain is relatively small; however, the user mobility offered by the hybrid system remains the main advantage over the PLC only system.

eess.SP↗

arXiv2018

Vector OFDM Transmission over Non-Gaussian Power Line Communication Channels

Most of the recent power line communication (PLC) systems and standards, both narrow-band and broadband, are based on orthogonal frequency-division multiplexing (OFDM). This multiplexing scheme however suffers from the high peak-to-average power ratio (PAPR) which can considerably impact the energy efficiency, size and cost of PLC modems as well as cause electromagnetic compatibility (EMC) issues. This paper investigates the performance of vector OFDM (VOFDM), which has inherently better PAPR properties, over non-Gaussian broadband PLC channels equipped with two nonlinear preprocessors at the receiver. In addition, the low PAPR property of the VOFDM system is exploited to further enhance the efficiency of the nonlinear preprocessors. The achievable gains are studied in terms of the complementary cumulative distribution function of the PAPR, probability of noise detection error and the signal-to-noise ratio at the output of the nonlinear preprocessors. For comparison's sake, the performance of conventional OFDM systems is also presented throughout the paper. Results reveal that the proposed system is able to provide up to 2 dB saving in the transmit power relative to the conventional OFDM under same system conditions, which eventually also translates into a system that is more resilient to EMC limits, reduced cost and size of PLC modems. It is also shown that the achievable gains become more significant as the vector block (VB) size of the VOFDM system is increased.

eess.SP↗

arXiv2018

Wireless Power Transfer in Cooperative DF Relaying Networks with Log-Normal Fading

Energy-harvesting and wireless power transfer in cooperative relaying networks have recently attracted a considerable amount of research attention. Most of the existing work on this topic however focuses on Rayleigh fading channels which represents outdoor environments. Unlike these studies, in this paper we analyze the performance of wireless power transfer in two-hop decode-and-forward (DF) cooperative relaying systems in indoor channels characterized by log-normal fading. Three well-known energy-harvesting protocols are considered in our evaluations: a) time-switching relaying (TSR), b) power-splitting relaying (PSR) and c) ideal relaying receiver (IRR). The performance is evaluated in terms of the ergodic outage probability for which we derive accurate analytical expressions for the three systems under consideration. Results reveal that careful selection of the energy-harvesting time and power-splitting factors in the TSR- and PSR-based system are important to optimize performance. It is also presented that the optimized PSR system has near-ideal performance and that increasing the source transmit power and/or the energy-harvester efficiency can further improve performance.

eess.SP↗

arXiv2017

Ergodic Capacity Analysis of Wireless Powered AF Relaying Systems over $α$-$μ$ Fading Channels

In this paper, we consider a two-hop amplify-and-forward (AF) relaying system, where the relay node is energy-constrained and harvests energy from the source node. In the literature, there are three main energy-harvesting (EH) protocols, namely, time-switching relaying (TSR), power-splitting (PS) relaying (PSR) and ideal relaying receiver (IRR). Unlike the existing studies, in this paper, we consider $α$-$μ$ fading channels. In this respect, we derive accurate unified analytical expressions for the ergodic capacity for the aforementioned protocols over independent but not identically distributed (i.n.i.d) $α$-$μ$ fading channels. Three special cases of the $α$-$μ$ model, namely, Rayleigh, Nakagami-mandWeibull fading channels were investigated. Our analysis is verified through numerical and simulation results. It is shown that finding the optimal value of the PS factor for the PSR protocol and the EH time fraction for the TSR protocol is a crucial step in achieving the best network performance.

cs.IT↗