SearcharxivSearch

arXiv subjects

L. F. Edge

Publications and source records attributed to L. F. Edge.

14 recordsLinked to original sources

How valley-orbit states in silicon quantum dots probe quantum well interfaces

The energies of valley-orbit states in silicon quantum dots are determined by an as yet poorly understood interplay between interface roughness, orbital confinement, and electron interactions. Here, we report measurements of one- and two-electron valley-orbit state energies as the dot potential is modified by changing gate voltages, and we calculate these same energies using full configuration interaction calculations. The results enable an understanding of the interplay between the physical contributions and enable a new probe of the quantum well interface.

cond-mat.mes-hall

Probing the Spatial Variation of the Inter-Valley Tunnel Coupling in a Silicon Triple Quantum Dot

Electrons confined in silicon quantum dots exhibit orbital, spin, and valley degrees of freedom. The valley degree of freedom originates from the bulk bandstructure of silicon, which has six degenerate electronic minima. The degeneracy can be lifted in silicon quantum wells due to strain and electronic confinement, but the "valley splitting" of the two lowest lying valleys is known to be sensitive to atomic-scale disorder. Large valley splittings are desirable to have a well-defined spin qubit. In addition, an understanding of the inter-valley tunnel coupling that couples different valleys in adjacent quantum dots is extremely important, as the resulting gaps in the energy level diagram may affect the fidelity of charge and spin transfer protocols in silicon quantum dot arrays. Here we use microwave spectroscopy to probe spatial variations in the valley splitting, and the intra- and inter-valley tunnel couplings ($t_{ij}$ and $t'_{ij}$) that couple dots $i$ and $j$ in a triple quantum dot (TQD). We uncover large spatial variations in the ratio of inter-valley to intra-valley tunnel couplings $t_{12}'/t_{12}=0.90$ and $t_{23}'/t_{23}=0.56$. By tuning the interdot tunnel barrier we also show that $t'_{ij}$ scales linearly with $t_{ij}$, as expected from theory. The results indicate strong interactions between different valley states on neighboring dots, which we attribute to local inhomogeneities in the silicon quantum well.

cond-mat.mes-hall

Coherent control and spectroscopy of a semiconductor quantum dot Wigner molecule

Multi-electron semiconductor quantum dots have found wide application in qubits, where they enable readout and enhance polarizability. However, coherent control in such dots has typically been restricted to only the lowest two levels, and such control in the strongly interacting regime has not been realized. Here we report quantum control of eight different resonances in a silicon-based quantum dot. We use qubit readout to perform spectroscopy, revealing a dense set of energy levels with characteristic spacing far smaller than the single-particle energy. By comparing with full configuration interaction calculations, we argue that the dense set of levels arises from Wigner-molecule physics.

cond-mat.mes-hall

Magnetic Gradient Fluctuations from Quadrupolar $^{73}$Ge in Si/SiGe Exchange-Only Qubits

We study the time-fluctuating magnetic gradient noise mechanisms in pairs of Si/SiGe quantum dots using exchange echo noise spectroscopy. We find through a combination of spectral inversion and correspondence to theoretical modeling that quadrupolar precession of the $^{73}$Ge nuclei play a key role in the spin-echo decay time $T_2$, with a characteristic dependence on magnetic field and the width of the Si quantum well. The $^{73}$Ge noise peaks appear at the fundamental and first harmonic of the $^{73}$Ge Larmor resonance, superimposed over $1/f$ noise due to $^{29}$Si dipole-dipole dynamics, and are dependent on material epitaxy and applied magnetic field. These results may inform the needs of dynamical decoupling when using Si/SiGe quantum dots as qubits in quantum information processing devices.

quant-ph

Fabrication process and failure analysis for robust quantum dots in silicon

We present an improved fabrication process for overlapping aluminum gate quantum dot devices on Si/SiGe heterostructures that incorporates low-temperature inter-gate oxidation, thermal annealing of gate oxide, on-chip electrostatic discharge (ESD) protection, and an optimized interconnect process for thermal budget considerations. This process reduces gate-to-gate leakage, damage from ESD, dewetting of aluminum, and formation of undesired alloys in device interconnects. Additionally, cross-sectional scanning transmission electron microscopy (STEM) images elucidate gate electrode morphology in the active region as device geometry is varied. We show that overlapping aluminum gate layers homogeneously conform to the topology beneath them, independent of gate geometry, and identify critical dimensions in the gate geometry where pattern transfer becomes non-ideal, causing device failure.

physics.app-ph

Microwave Engineering for Semiconductor Quantum Dots in a cQED Architecture

We develop an engineered microwave environment for coupling high Q superconducting resonators to quantum dots using a multilayer fabrication stack for the dot control wiring. Analytic and numerical models are presented to understand how parasitic capacitive coupling to the dot bias leads can result in microwave energy leakage and low resonator quality factors. We show that by controlling the characteristic impedance of the dot bias wiring, on-chip quality factors of 8140 can be attained without the addition of explicit filtering. Using this approach we demonstrate single electron occupation in double and triple dots detected via dipole or quadrupole coupling to a superconducting resonator. Additionally, by using multilayer fabrication we are able to improve ground plane integrity and keep microwave crosstalk below -20 dB out to 18 GHz while maintaining high wire density which will be necessary for future circuit quantum electrodyanmics (cQED) quantum dot processors.

cond-mat.mes-hall

Progress Towards a Capacitively Mediated CNOT Between Two Charge Qubits in Si/SiGe

Fast operations, an easily tunable Hamiltonian, and a straightforward two-qubit interaction make charge qubits a useful tool for benchmarking device performance and exploring two-qubit dynamics. Here, we tune a linear chain of four Si/SiGe quantum dots to host two double dot charge qubits. Using the capacitance between the double dots to mediate a strong two-qubit interaction, we simultaneously drive coherent transitions to generate correlations between the qubits. We then sequentially pulse the qubits to drive one qubit conditionally on the state of the other. We find that a conditional $π$-rotation can be driven in just 74 ps with a modest fidelity demonstrating the possibility of two-qubit operations with a 13.5 GHz clockspeed.

quant-ph

Split-Gate Cavity Coupler for Silicon Circuit Quantum Electrodynamics

Coherent charge-photon and spin-photon coupling has recently been achieved in silicon double quantum dots (DQD). Here we demonstrate a versatile split-gate cavity-coupler that allows more than one DQD to be coupled to the same microwave cavity. Measurements of the cavity transmission as a function of level detuning yield a charge cavity coupling rate $g_c/2π$ = 58 MHz, charge decoherence rate $γ_c/2π$ = 36 MHz, and cavity decay rate $κ/2π$ = 1.2 MHz. The charge cavity coupling rate is in good agreement with device simulations. Our coupling technique can be extended to enable simultaneous coupling of multiple DQDs to the same cavity mode, opening the door to long-range coupling of semiconductor qubits using microwave frequency photons.

quant-ph

Measurements of capacitive coupling within a quadruple quantum dot array

We present measurements of the capacitive coupling energy and the inter-dot capacitances in a linear quadruple quantum dot array in undoped Si/SiGe. With the device tuned to a regime of strong ($>$1 GHz) intra-double dot tunnel coupling, as is typical for double dot qubits, we measure a capacitive coupling energy of $20.9 \pm 0.3$ GHz. In this regime, we demonstrate a fitting procedure to extract all the parameters in the 4D Hamiltonian for two capacitively coupled charge qubits from a 2D slice through the quadruple dot charge stability diagram. We also investigate the tunability of the capacitive coupling energy, using inter-dot barrier gate voltages to tune the inter- and intra-double dot capacitances, and change the capacitive coupling energy of the double dots over a range of 15-32 GHz. We provide a model for the capacitive coupling energy based on the electrostatics of a network of charge nodes joined by capacitors, which shows how the coupling energy should depend on inter-double dot and intra-double dot capacitances in the network, and find that the expected trends agree well with the measurements of coupling energy.

quant-ph

Coherent transfer of quantum information in silicon using resonant SWAP gates

Solid state quantum processors based on spins in silicon quantum dots are emerging as a powerful platform for quantum information processing. High fidelity single- and two-qubit gates have recently been demonstrated and large extendable qubit arrays are now routinely fabricated. However, two-qubit gates are mediated through nearest-neighbor exchange interactions, which require direct wavefunction overlap. This limits the overall connectivity of these devices and is a major hurdle to realizing error correction, quantum random access memory, and multi-qubit quantum algorithms. To extend the connectivity, qubits can be shuttled around a device using quantum SWAP gates, but phase coherent SWAPs have not yet been realized in silicon devices. Here, we demonstrate a new single-step resonant SWAP gate. We first use the gate to efficiently initialize and readout our double quantum dot. We then show that the gate can move spin eigenstates in 100 ns with average fidelity $\bar{F}_{SWAP}^p$ = 98%. Finally, the transfer of arbitrary two-qubit product states is benchmarked using state tomography and Clifford randomized benchmarking, yielding an average fidelity of $\bar{F}_{SWAP}^c$ = 84% for gate operation times of ~300 ns. Through coherent spin transport, our resonant SWAP gate enables the coupling of non-adjacent qubits, thus paving the way to large scale experiments using silicon spin qubits.

cond-mat.mes-hall

Site-selective quantum control in an isotopically enriched 28Si/SiGe quadruple quantum dot

Silicon spin qubits are a promising quantum computing platform offering long coherence times, small device sizes, and compatibility with industry-backed device fabrication techniques. In recent years, high fidelity single-qubit and two-qubit operations have been demonstrated in Si. Here, we demonstrate coherent spin control in a quadruple quantum dot fabricated using isotopically enriched 28Si. We tune the ground state charge configuration of the quadruple dot down to the single electron regime and demonstrate tunable interdot tunnel couplings as large as 20 GHz, which enables exchange-based two-qubit gate operations. Site-selective single spin rotations are achieved using electric dipole spin resonance in a magnetic field gradient. We execute a resonant-CNOT gate between two adjacent spins in 270 ns.

cond-mat.mes-hall

Spin-Blockade Spectroscopy of Si/SiGe Quantum Dots

We implement a technique for measuring the singlet-triplet energy splitting responsible for spin-to-charge conversion in semiconductor quantum dots. This method, which requires fast, single-shot charge measurement, reliably extracts an energy in the limits of both large and small splittings. We perform this technique on an undoped, accumulation-mode Si/SiGe triple-quantum dot and find that the measured splitting varies smoothly as a function of confinement gate biases. Not only does this demonstration prove the value of having an $in~situ$ excited-state measurement technique as part of a standard tune-up procedure, it also suggests that in typical Si/SiGe quantum dot devices, spin-blockade can be limited by lateral orbital excitation energy rather than valley splitting.

quant-ph

Circuit Quantum Electrodynamics Architecture for Gate-Defined Quantum Dots in Silicon

We demonstrate a hybrid device architecture where the charge states in a double quantum dot (DQD) formed in a Si/SiGe heterostructure are read out using an on-chip superconducting microwave cavity. A quality factor Q = 5,400 is achieved by selectively etching away regions of the quantum well and by reducing photon losses through low-pass filtering of the gate bias lines. Homodyne measurements of the cavity transmission reveal DQD charge stability diagrams and a charge-cavity coupling rate g_c/2pi = 23 MHz. These measurements indicate that electrons trapped in a Si DQD can be effectively coupled to microwave photons, potentially enabling coherent electron-photon interactions in silicon.

cond-mat.mes-hall

Si-compatible candidates for high-K dielectrics with the Pbnm perovskite structure

We analyze both experimentally (where possible) and theoretically from first-principles the dielectric tensor components and crystal structure of five classes of Pbnm perovskites. All of these materials are believed to be stable on silicon and are therefore promising candidates for high-K dielectrics. We also analyze the structure of these materials with various simple models, decompose the lattice contribution to the dielectric tensor into force constant matrix eigenmode contributions, explore a peculiar correlation between structural and dielectric anisotropies in these compounds and give phonon frequencies and infrared activities of those modes that are infrared-active. We find that CaZrO_3, SrZrO_3, LaHoO_3, and LaYO_3 are among the most promising candidates for high-K dielectrics among the compounds we considered.

cond-mat.mtrl-sci