arXiv subjects

L. Francis

Publications and source records attributed to L. Francis.

26 records · Page 2Linked to original sources

arXiv2023

The diverse chemistry of protoplanetary disks as revealed by JWST

Early results from the JWST-MIRI guaranteed time programs on protostars (JOYS) and disks (MINDS) are presented. Thanks to the increased sensitivity, spectral and spatial resolution of the MIRI spectrometer, the chemical inventory of the planet-forming zones in disks can be investigated with unprecedented detail across stellar mass range and age. Here data are presented for five disks, four around low-mass stars and one around a very young high-mass star. The mid-infrared spectra show some similarities but also significant diversity: some sources are rich in CO2, others in H2O or C2H2. In one disk around a very low-mass star, booming C2H2 emission provides evidence for a ``soot'' line at which carbon grains are eroded and sublimated, leading to a rich hydrocarbon chemistry in which even di-acetylene (C4H2) and benzene (C6H6) are detected (Tabone et al. 2023). Together, the data point to an active inner disk gas-phase chemistry that is closely linked to the physical structure (temperature, snowlines, presence of cavities and dust traps) of the entire disk and which may result in varying CO2/H2O abundances and high C/O ratios >1 in some cases. Ultimately, this diversity in disk chemistry will also be reflected in the diversity of the chemical composition of exoplanets.

astro-ph.GA↗

arXiv2023

JOYS: JWST Observations of Young protoStars: Outflows and accretion in the high-mass star-forming region IRAS23385+605

Aims: The JWST program JOYS (JWST Observations of Young protoStars) aims at characterizing the physical and chemical properties of young high- and low-mass star-forming regions, in particular the unique mid-infrared diagnostics of the warmer gas and solid-state components. We present early results from the high-mass star formation region IRAS23385+6053. Methods: The JOYS program uses the MIRI MRS with its IFU to investigate a sample of high- and low-mass star-forming protostellar systems. Results: The 5 to 28mum MIRI spectrum of IRAS23385+6053 shows a plethora of features. While the general spectrum is typical for an embedded protostar, we see many atomic and molecular gas lines boosted by the higher spectral resolution and sensitivity compared to previous space missions. Furthermore, ice and dust absorption features are also present. Here, we focus on the continuum emission, outflow tracers like the H2, [FeII] and [NeII] lines as well as the potential accretion tracer Humphreys alpha HI(7--6). The short-wavelength MIRI data resolve two continuum sources A and B, where mid-infrared source A is associated with the main mm continuum peak. The combination of mid-infrared and mm data reveals a young cluster in its making. Combining the mid-infrared outflow tracer H2, [FeII] and [NeII] with mm SiO data shows a complex interplay of at least three molecular outflows driven by protostars in the forming cluster. Furthermore, the Humphreys alpha line is detected at a 3-4sigma level towards the mid-infrared sources A and B. Following Rigliaco et al. (2015), one can roughly estimate accretion luminosities and corresponding accretion rates between ~2.6x10^-6 and ~0.9x10^-4 M_sun/yr. This is discussed in the context of the observed outflow rates. Conclusions: The analysis of the MIRI MRS observations for this young high-mass star-forming region reveals connected outflow and accretion signatures.

astro-ph.SR↗

arXiv2022

Hot methanol in the [BHB2007] 11 protobinary system: hot corino versus shock origin? : FAUST V

Methanol is a ubiquitous species commonly found in the molecular interstellar medium. It is also a crucial seed species for the building-up of the chemical complexity in star forming regions. Thus, understanding how its abundance evolves during the star formation process and whether it enriches the emerging planetary system is of paramount importance. We used new data from the ALMA Large Program FAUST (Fifty AU STudy of the chemistry in the disk/envelope system of Solar-like protostars) to study the methanol line emission towards the [BHB2007] 11 protobinary system (sources A and B), where a complex structure of filaments connecting the two sources with a larger circumbinary disk has been previously detected. Twelve methanol lines have been detected with upper energies in the range [45-537] K along with one 13CH3OH transition. The methanol emission is compact and encompasses both protostars, separated by only 28 au and presents three velocity components, not spatially resolved by our observations, associated with three different spatial regions, with two of them close to 11B and the third one associated with 11A. A non-LTE radiative transfer analysis of the methanol lines concludes that the gas is hot and dense and highly enriched in methanol with an abundance as high as 1e-5. Using previous continuum data, we show that dust opacity can potentially completely absorb the methanol line emission from the two binary objects. Although we cannot firmly exclude other possibilities, we suggest that the detected hot methanol is resulting from the shocked gas from the incoming filaments streaming towards [BHB2007] 11 A and B, respectively. Higher spatial resolution observations are necessary to confirm this hypothesis.

astro-ph.GA↗

arXiv2021

Probing inner and outer disk misalignments in transition disks

For several transition disks (TDs), dark regions interpreted as shadows have been observed in scattered light imaging and are hypothesized to originate from misalignments between distinct disk regions. We aim to investigate the presence of misalignments in TDs. We study the inner disk geometries of 20 well-known transition disks with VLTI/GRAVITY observations and use complementary $^{12}$CO and $^{13}$CO molecular line data from ALMA to derive the orientation of the outer disk regions. We fit simple models to the GRAVITY data to derive the inner disks inclination and position angles. The outer disk geometries were derived from Keplerian fits to the ALMA velocity maps and compared to the inner disk constraints. We also predicted the locations of shadows for significantly misaligned systems. Our analysis reveals six disks to exhibit significant misalignments between their inner and outer disks. The predicted shadow positions agree well with the scattered light images of HD100453 and HD142527, and we find supporting evidence for a shadow in the disk around CQ Tau. In the other three targets for which we infer significantly misaligned disks, V1247 Ori, V1366 Ori, and RY Lup, we do not see any evident sign of shadows in the scattered light images. The scattered light shadows observed in DoAr44, HD135344B, and HD139614 are consistent with our observations, yet the underlying morphology is likely too complex to be described by our models and the accuracy achieved by our observations. Whereas we can derive precise constraints on the potential shadow positions for well-resolved inner disks around HAeBe stars, the statistical uncertainties for the marginally resolved inner disks around the TTS of our sample make it difficult to extract conclusive constraints for the presence of shadows in these systems.

astro-ph.EP↗

arXiv2020

FAUST I. The hot corino at the heart of the prototypical Class I protostar L1551 IRS5

The study of hot corinos in Solar-like protostars has been so far mostly limited to the Class 0 phase, hampering our understanding of their origin and evolution. In addition, recent evidence suggests that planet formation starts already during Class I phase, which, therefore, represents a crucial step in the future planetary system chemical composition. Hence, the study of hot corinos in Class I protostars has become of paramount importance. Here we report the discovery of a hot corino towards the prototypical Class I protostar L1551 IRS5, obtained within the ALMA Large Program FAUST. We detected several lines from methanol and its isopotologues ($^{13}$CH$_{\rm 3}$OH and CH$_{\rm 2}$DOH), methyl formate and ethanol. Lines are bright toward the north component of the IRS5 binary system, and a possible second hot corino may be associated with the south component. The methanol lines non-LTE analysis constrains the gas temperature ($\sim$100 K), density ($\geq$1.5$\times$10$^{8}$ cm$^{-3}$), and emitting size ($\sim$10 au in radius). All CH$_{\rm 3}$OH and $^{13}$CH$_{\rm 3}$OH lines are optically thick, preventing a reliable measure of the deuteration. The methyl formate and ethanol relative abundances are compatible with those measured in Class 0 hot corinos. Thus, based on the present work, little chemical evolution from Class 0 to I hot corinos occurs.

astro-ph.SR↗

arXiv2006

In Situ Evaluation of Density, Viscosity and Thickness of Adsorbed Soft Layers by Combined Surface Acoustic Wave and Surface Plasmon Resonance

We show the theoretical and experimental combination of acoustic and optical methods for the in situ quantitative evaluation of the density, the viscosity and the thickness of soft layers adsorbed on chemically tailored metal surfaces. For the highest sensitivity and an operation in liquids, a Love mode surface acoustic wave (SAW) sensor with a hydrophobized gold coated sensing area is the acoustic method, while surface plasmon resonance (SPR) on the same gold surface as the optical method is monitored simultaneously in a single set-up for the real-time and label-free measurement of the parameters of adsorbed soft layers, which means for layers with a predominant viscous behavior. A general mathematical modeling in equivalent viscoelastic transmission lines is presented to determine the correlation between experimental SAW signal shifts and the waveguide structure including the presence of the adsorbed layer and the supporting liquid from which it segregates. A methodology is presented to identify from SAW and SPR simulations the parameters representatives of the soft layer. During the absorption of a soft layer, thickness or viscosity changes are observed in the experimental ratio of the SAW signal attenuation to the SAW signal phase and are correlated with the theoretical model. As application example, the simulation method is applied to study the thermal behavior of physisorbed PNIPAAm, a polymer whose conformation is sensitive to temperature, under a cycling variation of temperature between 20 and 40 oC. Under the assumption of the bulk density and the bulk refractive index of PNIPAAm, thickness and viscosity of the film are obtained from simulations; the viscosity is correlated to the solvent content of the physisorbed layer.

cond-mat.soft↗

arXiv2003

Influence of electromagnetic interferences on the gravimetric sensitivity of surface acoustic waveguides

Surface acoustic waveguides are increasing in interest for (bio)chemical detection. The surface mass modification leads to measurable changes in the propagation properties of the waveguide. Among a wide variety of waveguides, Love mode has been investigated because of its high gravimetric sensitivity. The acoustic signal launched and detected in the waveguide by electrical transducers is accompanied by an electromagnetic wave; the interaction of the two signals, easily enhanced by the open structure of the sensor, creates interference patterns in the transfer function of the sensor. The influence of these interferences on the gravimetric sensitivity is presented, whereby the structure of the entire sensor is modelled. We show that electromagnetic interferences generate an error in the experimental value of the sensitivity. This error is different for the open and the closed loop configurations of the sensor. The theoretical approach is completed by the experimentation of an actual Love mode sensor operated under liquid in open loop configuration. The experiment indicates that the interaction depends on the frequency and the mass modifications.

physics.bio-ph↗

arXiv2003

Simultaneous surface acoustic wave and surface plasmon resonance measurements: electrodeposition and biological interactions monitoring

We present results from an instrument combining surface acoustic wave (SAW) propagation and surface plasmon resonance (SPR) measurements. The objective is to use two independent methods, the former based on adsorbed mass change measurements and the latter on surface dielectric properties variations, to identify physical properties of protein layers, and more specifically their water content. We display mass sensitivity calibration curves using electrodeposition of copper leading to a sensitivity in liquid of 150$\pm15$ $cm^2/g$ for the Love mode device used here, and the application to monitoring biological processes. The extraction of protein layer thickness and protein to water content ratio is also presented for S-layer proteins under investigation. We obtain respectively 4.7$\pm$0.7 nm and 75$\pm$15%.

cond-mat.soft↗