arXiv subjects

L. Gammaitoni

Publications and source records attributed to L. Gammaitoni.

13 recordsLinked to original sources

arXiv2020

Direct probe of the interior of an electric pion in a Cooper pair superinsulator

The nature of hadrons is one of the most fundamental mysteries of physics. It is generally agreed that they are made of "colored" quarks, which move nearly free at short scales but are confined inside hadrons by strong interactions at large distances. Because of confinement, quarks are never directly observable and, experimentally, their properties can be tested only indirectly, via high energy collisions. Here we show that superinsulating films realize a complete, one-color model system of hadron physics with Cooper pairs playing the role of quarks. We report measurements on highly controlled NbTiN films that provide a window into the interior of "Cooper pair mesons" and present the first direct evidence of asymptotic freedom, `t Hooft's dual superconductivity confinement mechanism, and magnetic monopoles.

cond-mat.supr-con↗

arXiv2018

Energy Harvesting from a bio cell

This work shows experimentally how electrical energy can be harvested directly from cell membrane potential and used to power a wireless communication. The experiment is performed by exploiting the membrane potential of Xenopus oocytes taken from female frogs. Electrical potential energy of the membrane is transferred to a capacitor connected to the cell via a proper electrical circuit. Once the capacitor has reached the planned amount of energy, the circuit is disconnected from the cell and the stored energy is used to power a radio frequency communication that carries bio-sensed information to a distanced receiving circuit. Our result shows that electrical energy can be harvested directly from biological cells and used for a number of purposes, including wireless communication of sensed biological quantities to a remote receiving hub.

physics.bio-ph↗

arXiv2015

Reset and switch protocols at Landauer limit in a graphene buckled ribbon

Heat produced during a reset operation is meant to show a fundamental bound known as Landauer limit, while simple switch operations have an expected minimum amount of produced heat equal to zero. However, in both cases, present-day technology realizations dissipate far beyond these theoretical limits. In this paper we present a study based on molecular dynamics simulations, where reset and switch protocols are applied on a graphene buckled ribbon, employed here as a nano electromechanical switch working at the thermodynamic limit.

cond-mat.mes-hall↗

arXiv2015

Conditional entropy and Landauer principle

Landauer principle describes the minimum heat produced by an information-processing device. Recently a new term has been included in the minimum heat production: it's called conditional entropy and takes into account the microstates content of a given logic state. Usually this term is assumed zero in bistable symmetric systems thanks to the strong hypothesis used to derive Landauer principle. In this paper we show that conditional entropy can be nonzero even for bistable symmetric systems and that it can be expressed as the sum of three different terms related to the probabilistic features of the device. The contribution of the three terms to conditional entropy (and thus to minimum heat production) is then discussed for the case of bit-reset.

cond-mat.stat-mech↗

arXiv2014

Advanced Virgo: a 2nd generation interferometric gravitational wave detector

Advanced Virgo is the project to upgrade the Virgo interferometric detector of gravitational waves, with the aim of increasing the number of observable galaxies (and thus the detection rate) by three orders of magnitude. The project is now in an advanced construction phase and the assembly and integration will be completed by the end of 2015. Advanced Virgo will be part of a network with the two Advanced LIGO detectors in the US and GEO HF in Germany, with the goal of contributing to the early detections of gravitational waves and to opening a new observation window on the universe. In this paper we describe the main features of the Advanced Virgo detector and outline the status of the construction.

gr-qc↗

arXiv2014

Reconstruction of the gravitational wave signal $h(t)$ during the Virgo science runs and independent validation with a photon calibrator

The Virgo detector is a kilometer-scale interferometer for gravitational wave detection located near Pisa (Italy). About 13 months of data were accumulated during four science runs (VSR1, VSR2, VSR3 and VSR4) between May 2007 and September 2011, with increasing sensitivity. In this paper, the method used to reconstruct, in the range 10 Hz-10 kHz, the gravitational wave strain time series $h(t)$ from the detector signals is described. The standard consistency checks of the reconstruction are discussed and used to estimate the systematic uncertainties of the $h(t)$ signal as a function of frequency. Finally, an independent setup, the photon calibrator, is described and used to validate the reconstructed $h(t)$ signal and the associated uncertainties. The uncertainties of the $h(t)$ time series are estimated to be 8% in amplitude. The uncertainty of the phase of $h(t)$ is 50 mrad at 10 Hz with a frequency dependence following a delay of 8 $μ$s at high frequency. A bias lower than $4\,\mathrm{μs}$ and depending on the sky direction of the GW is also present.

gr-qc↗

arXiv2014

Fundamental energy limits in the physics of small-scale binary switches

Binary switches are the basic element of modern digital computers. In this paper we discuss the role of switching procedure with reference to the fundamental limits in minimum energy dissipation. We show that the minimum energy depends on the switching procedure and test this result with micromagnetic simulations of a nanoscale switch realized with single cylindrical element of permalloy (NiFe). Finally we establish a relation between minimum energy and switching error probability.

cond-mat.mes-hall↗

arXiv2011

Energy dissipation in small-scale shape-change dynamics

Shape is an important feature of physical systems although very seldom it is addressed in the framework of a quantitative description approach. In this paper we propose to interpret the shape of things as a physical manifestation of the content of information associated with each thing and show that a change of shape in a physical system is necessarily connected with a change of its entropy and thus involves energy. We estimate the amount of energy dissipated during a shape change and propose experimental tests to be performed in nanoscale systems, to verify this prediction by measuring the expected dissipation in few simple cases.

nlin.AO↗

arXiv2011

Characterization of the Virgo Seismic Environment

The Virgo gravitational wave detector is an interferometer (ITF) with 3km arms located in Pisa, Italy. From July to October 2010, Virgo performed its third science run (VSR3) in coincidence with the LIGO detectors. Despite several techniques adopted to isolate the interferometer from the environment, seismic noise remains an important issue for Virgo. Vibrations produced by the detector infrastructure (such as air conditioning units, water chillers/heaters, pumps) are found to affect Virgo's sensitivity, with the main coupling mechanisms being through beam jitter and scattered light processes. The Advanced Virgo (AdV) design seeks to reduce ITF couplings to environmental noise by having most vibration-sensitive components suspended and in-vacuum, as well as muffle and relocate loud machines. During the months of June and July 2010, a Guralp-3TD seismometer was stationed at various locations around the Virgo site hosting major infrastructure machines. Seismic data were examined using spectral and coherence analysis with seismic probes close to the detector. The primary aim of this study was to identify noisy machines which seismically affect the ITF environment and thus require mitigation attention. Analyzed machines are located at various distances from the experimental halls, ranging from 10m to 100m. An attempt is made to measure the attenuation of emitted noise at the ITF and correlate it to the distance from the source and to seismic attenuation models in soil.

gr-qc↗

arXiv2011

Calibration and sensitivity of the Virgo detector during its second science run

The Virgo detector is a kilometer-length interferometer for gravitational wave detection located near Pisa (Italy). During its second science run (VSR2) in 2009, six months of data were accumulated with a sensitivity close to its design. In this paper, the methods used to determine the parameters for sensitivity estimation and gravitational wave reconstruction are described. The main quantities to be calibrated are the frequency response of the mirror actuation and the sensing of the output power. Focus is also put on their absolute timing. The monitoring of the calibration data as well as the parameter estimation with independent techniques are discussed to provide an estimation of the calibration uncertainties. Finally, the estimation of the Virgo sensitivity in the frequency-domain is described and typical sensitivities measured during VSR2 are shown.

gr-qc↗

arXiv2010

Virgo calibration and reconstruction of the gravitational wave strain during VSR1

Virgo is a kilometer-length interferometer for gravitational waves detection located near Pisa. Its first science run, VSR1, occured from May to October 2007. The aims of the calibration are to measure the detector sensitivity and to reconstruct the time series of the gravitational wave strain h(t). The absolute length calibration is based on an original non-linear reconstruction of the differential arm length variations in free swinging Michelson configurations. It uses the laser wavelength as length standard. This method is used to calibrate the frequency dependent response of the Virgo mirror actuators and derive the detector in-loop response and sensitivity within ~5%. The principle of the strain reconstruction is highlighted and the h(t) systematic errors are estimated. A photon calibrator is used to check the sign of h(t). The reconstructed h(t) during VSR1 is valid from 10 Hz up to 10 kHz with systematic errors estimated to 6% in amplitude. The phase error is estimated to be 70 mrad below 1.9 kHz and 6 micro-seconds above.

gr-qc↗

arXiv2008

Universal and reconfigurable logic gates in a noise-triggered artificial neuron node

Submicron-sized mesas of resonant tunneling diodes (RTDs) with split drain contacts have been realized and the current-voltage characteristics have been studied in the bistable regime at room temperature. Dynamically-biased, the RTDs show noise-triggered firing of spike-like signals and can act as reconfigurable universal logic gates for small voltage changes of a few mV at the input branches. These observations are interpreted in terms of a stochastic nonlinear processes in the split RTD, which are found to be robust against noise. The split RTDs show also gain for the fired-signal bursts, can be easily integrated to arrays of multiple inputs and have thus the potential to mimic neuron nodes in nanoelectronic circuits.

cond-mat.dis-nn↗

arXiv2008

Nonlinear energy harvesting

Ambient energy harvesting has been in recent years the recurring object of a number of research efforts aimed at providing an autonomous solution to the powering of small-scale electronic mobile devices. Among the different solutions, vibration energy harvesting has played a major role due to the almost universal presence of mechanical vibrations: from ground shaking to human movements, from ambient sound to thermal noise. Standard approaches are mainly based on resonant linear oscillators that are acted on by ambient vibrations. Here we propose a new method based on the exploitation of the dynamical features of stochastic nonlinear oscillators. Such a method is shown to outperform standard linear oscillators and to overcome some of the most severe limitations of present approaches, like narrow bandwidth, need for continuous frequency tuning and low efficiency. We demonstrate the superior performances of this method by applying it to piezoelectric energy harvesting from ambient vibration. Experimental results from a toy-model oscillator are described in terms of nonlinear stochastic dynamics. We prove that the method proposed here is quite general in principle and could be applied to a wide class of nonlinear oscillators and different energy conversion principles. There are also potentials for realizing micro/nano-scale power generators.

nlin.AO↗