arXiv subjects

L. Yan

Publications and source records attributed to L. Yan.

At least 55 records · Page 3Linked to original sources

arXiv2020

The Broad Absorption Line Tidal Disruption Event iPTF15af: Optical and Ultraviolet Evolution

We present multi-wavelength observations of the tidal disruption event (TDE) iPTF15af, discovered by the intermediate Palomar Transient Factory (iPTF) survey at redshift $z=0.07897$. The optical and ultraviolet (UV) light curves of the transient show a slow decay over five months, in agreement with previous optically discovered TDEs. It also has a comparable black-body peak luminosity of $L_{\rm{peak}} \approx 1.5 \times 10^{44}$ erg/s. The inferred temperature from the optical and UV data shows a value of (3$-$5) $\times 10^4$ K. The transient is not detected in X-rays up to $L_X < 3 \times 10^{42}$erg/s within the first five months after discovery. The optical spectra exhibit two distinct broad emission lines in the He II region, and at later times also H$α$ emission. Additionally, emission from [N III] and [O III] is detected, likely produced by the Bowen fluorescence effect. UV spectra reveal broad emission and absorption lines associated with high-ionization states of N V, C IV, Si IV, and possibly P V. These features, analogous to those of broad absorption line quasars (BAL QSOs), require an absorber with column densities $N_{\rm{H}} > 10^{23}$ cm$^{-2}$. This optically thick gas would also explain the non-detection in soft X-rays. The profile of the absorption lines with the highest column density material at the largest velocity is opposite that of BAL QSOs. We suggest that radiation pressure generated by the TDE flare at early times could have provided the initial acceleration mechanism for this gas. Spectral UV line monitoring of future TDEs could test this proposal.

astro-ph.HE↗

arXiv2020

The ALPINE-ALMA [CII] survey: Survey strategy, observations and sample properties of 118 star-forming galaxies at $4<z<6$

The ALMA-ALPINE [CII] survey is aimed at characterizing the properties of a sample of normal star-forming galaxies (SFGs). The ALMA Large Program to INvestigate (ALPINE) features 118 galaxies observed in the [CII]-158$μ$m line and far infrared (FIR) continuum emission during the period of rapid mass assembly, right after the end of the HI reionization, at redshifts of 4 5). Based on a visual inspection of the [CII] data cubes together with the large wealth of ancillary data, we find a surprisingly wide range of galaxy types, including 40% that are mergers, 20% extended and dispersion-dominated, 13% compact, and 11% rotating discs, with the remaining 16% too faint to be classified. This diversity indicates that a wide array of physical processes must be at work at this epoch, first and foremost, those of galaxy mergers. This paper sets a reference sample for the gas distribution in normal SFGs at 4<z<6.

astro-ph.CO↗

arXiv2020

The ALPINE-ALMA [CII] Survey: Size of Individual Star-Forming Galaxies at z=4-6 and their Extended Halo Structure

We present the physical extent of [CII] 158um line-emitting gas from 46 star-forming galaxies at z=4-6 from the ALMA Large Program to INvestigate CII at Early Times (ALPINE). Using exponential profile fits, we measure the effective radius of the [CII] line (r_e,[CII]) for individual galaxies and compare them with the rest-frame ultra-violet (UV) continuum (r_e,UV) from Hubble Space Telescope images. The effective radius r_e,[CII] exceeds r_e,UV by factors of ~2-3 and the ratio of r_e,[CII]/r_e,UV increases as a function of M_star. We do not find strong evidence that [CII] line, the rest-frame UV, and FIR continuum are always displaced over ~ 1-kpc scale from each other. We identify 30% of isolated ALPINE sources as having an extended [CII] component over 10-kpc scales detected at 4.1$σ$-10.9$σ$ beyond the size of rest-frame UV and far-infrared (FIR) continuum. One object has tentative rotating features up to ~10-kpc, where the 3D model fit shows the rotating [CII]-gas disk spread over 4 times larger than the rest-frame UV-emitting region. Galaxies with the extended [CII] line structure have high star-formation rate (SFR), stellar mass (M_star), low Lya equivalent-width, and more blue-shifted (red-shifted) rest-frame UV metal absorption (Lya line), as compared to galaxies without such extended [CII] structures. Although we cannot rule out the possibility that a selection bias towards luminous objects may be responsible for such trends, the star-formation driven outflow also explains all these trends. Deeper observations are essential to test whether the extended [CII] line structures are ubiquitous to high-z star-forming galaxies.

astro-ph.GA↗

arXiv2020

The ALPINE-ALMA [CII] survey: Molecular gas budget in the Early Universe as traced by [CII]

The molecular gas content of normal galaxies at z>4 is poorly constrained, because the commonly used molecular gas tracers become hard to detect. We use the [CII]158um luminosity, recently proposed as a molecular gas tracer, to estimate the molecular gas content in a large sample of main-sequence star-forming galaxies at z=4.4-5.9, with a median stellar mass of 10^9.7 Msun, drawn from the ALMA Large Program to INvestigate [CII] at Early times (ALPINE) survey. The agreement between molecular gas masses derived from [CII] luminosity, dynamical mass, and rest-frame 850um luminosity, extrapolated from the rest-frame 158um continuum, supports [CII] as a reliable tracer of molecular gas in our sample. We find a continuous decline of the molecular gas depletion timescale from z=0 to z=5.9, which reaches a mean value of (4.6+/-0.8)x10^8 yr at z~5.5, only a factor of 2-3 shorter than in present-day galaxies. This suggests a mild enhancement of star formation efficiency toward high redshifts, unless the molecular gas fraction significantly increases. Our estimates show that the rise in molecular gas fraction as reported previously, flattens off above z~3.7 to achieve a mean value of 63%+/-3 over z=4.4-5.9. This redshift evolution of the gas fraction is in line with the one of the specific star formation rate. We use multi-epoch abundance matching to follow the gas fraction evolution over cosmic time of progenitors of z=0 Milky Way-like galaxies in 10^13 Msun halos and of more massive z=0 galaxies in 10^14 Msun halos. Interestingly, the former progenitors show a monotonic decrease of the gas fraction with cosmic time, while the latter show a constant gas fraction from z=5.9 to z~2 and a decrease at z<2. We discuss three possible effects, namely outflows, halt of gas supplying, and over-efficient star formation, which may jointly contribute to the gas fraction plateau of the latter massive galaxies.

astro-ph.GA↗

arXiv2020

The ALPINE-ALMA [CII] Survey: Multi-Wavelength Ancillary Data and Basic Physical Measurements

We present the ancillary data and basic physical measurements for the galaxies in the ALMA Large Program to Investigate C+ at Early Times (ALPINE) survey - the first large multi-wavelength survey which aims at characterizing the gas and dust properties of 118 main-sequence galaxies at redshifts 4.4 < z < 5.9 via the measurement of [CII]-emission at 158 micro-meter (64% at >3.5$σ$) and the surrounding far-infrared (FIR) continuum in conjunction with a wealth of optical and near-infrared data. We outline in detail the spectroscopic data and selection of the galaxies as well as the ground- and space-based imaging products. In addition, we provide several basic measurements including stellar masses, star formation rates (SFR), rest-frame ultra-violet (UV) luminosities, UV continuum slopes ($β$), and absorption line redshifts, as well as H-alpha emission derived from Spitzer colors. We find that the ALPINE sample is representative of the 4 < z < 6 galaxy population selected by photometric methods and only slightly biased towards bluer colors ($Δβ$ ~ 0.2). Using [CII] as tracer of the systemic redshift (confirmed for one galaxy at z=4.5 out of 118 for which we obtained optical [OII]$λ$3727A emission), we confirm red shifted Ly-alpha emission and blue shifted absorption lines similar to findings at lower redshifts. By stacking the rest-frame UV spectra in the [CII] rest-frame we find that the absorption lines in galaxies with high specific SFR are more blue shifted, which could be indicative of stronger winds and outflows.

astro-ph.GA↗

arXiv2020

The ALPINE-ALMA [CII] Survey: On the nature of an extremely obscured serendipitous galaxy

We report the serendipitous discovery of a bright galaxy (Gal-A) observed as part of the ALMA Large Program to INvestigate [CII] at Early times (ALPINE). While this galaxy is detected both in line and continuum emission in ALMA Band 7, it is completely dark in UV/optical filters and only presents a marginal detection in the UltraVISTA Ks band. We discuss the nature of the observed ALMA line, i.e. whether the emission comes from [CII] at z~4.6, or from high-J CO transitions at z~2.2. In the first case we find a [CII]-to-FIR luminosity ratio of log(L_[CII]/L_FIR)=-2.5, consistent with the average value for local star-forming galaxies (SFGs); in the second case, instead, the source would lie outside of the empirical relations between L_CO and L_FIR found in the literature. At both redshifts, we derive the star-formation rate (SFR) from the ALMA continuum, and the stellar mass (M*) by using stellar population synthesis models as input for LePHARE spectral energy distribution (SED) fitting. Exploiting our results, we believe that Gal-A is a Main-Sequence (MS), dusty SFG at z=4.6 (i.e. [CII] emitter) with log(SFR/[M/yr])~1.4 and log(M*/M)~9.7. This work underlines the crucial role of the ALPINE survey in making a census of this class of objects, in order to unveil their contribution to the global star-formation rate density (SFRD) of the Universe at the end of the Reionisation epoch.

astro-ph.GA↗

arXiv2019

The ALPINE-ALMA [CII] Survey: A Triple Merger at z~4.56

We report the detection of [CII]158um emission from a system of three closely-separated sources in the COSMOS field at z~4.56, as part of the ALMA Large Program to INvestigate CII at Early times (ALPINE). The two dominant sources are closely associated, both spatially (1.6"~11kpc) and in velocity (~100km/s), while the third source is slightly more distant (2.8"~18kpc, ~300km/s). The second strongest source features a slight velocity gradient, while no significant velocity gradient is seen in the other two sources. Using the observed [CII] luminosities, we derive a total log(SFR_[CII]/[Msol/year])=2.8+/-0.2, which may be split into contributions of 59%, 31%, and 10% from the central, east, and west sources, respectively. Comparison of these [CII] detections to recent zoom-in cosmological simulations suggests an ongoing major merger. We are thus witnessing a system in a major phase of mass build-up by merging, including an on-going major merger and an upcoming minor merger, which is expected to end up in a single massive galaxy by z~2.5.

astro-ph.GA↗

arXiv2019

Triple GEM performance in magnetic field

Performance of triple GEM prototypes in strong magnetic field has been evaluated bymeans of a muon beam at the H4 line of the SPS test area at CERN. Data have been reconstructedand analyzed offline with two reconstruction methods: the charge centroid and the micro-Time-Projection-Chamber exploiting the charge and the time measurement respectively. A combinationof the two reconstruction methods is capable to guarantee a spatial resolution better than 150μmin magnetic field up to a 1 T.

physics.ins-det↗

arXiv2019

GRAAL: Gem Reconstruction And Analysis Library

MPGD are the new frontier in gas trackers. Among this kind of devices, theGEM chambers are widely used. The experimental signals acquired with the detector mustobviously be reconstructed and analysed. In this contribution, a new offline software to performreconstruction, alignment and analysis on the data collected with APV-25 and TIGER ASICswill be presented. GRAAL (Gem Reconstruction And Analysis Library) is able to measurethe performance of a MPGD detector with a strip segmented anode (presently). The code isdivided in three parts: reconstruction, where the hits are digitized and clusterized; tracking,where a procedure fits the points from the tracking system and uses that information to align thechamber with rotations and shifts; analysis, where the performance is evaluated (e.g. efficiency,spatial resolution,etc.). The user must set the geometry of the setup and then the programreturns automatically the analysis results, taking care of different conditions of gas mixture,electric field, magnetic field, geometries, strip orientation, dead strip, misalignment and manyothers.

physics.ins-det↗

arXiv2019

A fast and parametric digitization for triple-GEM detectors

Triple-GEM detectors are a well known technology in high energy physics. In order to have a complete understanding of their behavior, in parallel with on beam testing, a Monte Carlo code has to be developed to simulate their response to the passage of particles. The software must take into account all the physical processes involved from the primary ionization up to the signal formation, e.g. the avalanche multiplication and the effect of the diffusion on the electrons. In the case of gas detectors, existing software such as Garfield already perform a very detailed simulation but are CPU time consuming. A description of a reliable but faster simulation is presented here: it uses a parametric description of the variables of interest obtained by suitable preliminary Garfield simulations and tuned to the test beam data. It can reproduce the real values of the charge measured by the strip, needed to reconstruct the position with the Charge Centroid method. In addition, particular attention was put to the simulation of the timing information, which permits to apply also the micro-Time Projection Chamber position reconstruction, for the first time on a triple-GEM. A comparison between simulation and experimental values of some sentinel variables in different conditions of magnetic field, high voltage settings and incident angle will be shown.

physics.ins-det↗

arXiv2018

A model to explain angular distributions of $J/ψ$ and $ψ(2S)$ decays into $Λ\overlineΛ$ and $Σ^0\overlineΣ^0$

BESIII data show a particular angular distribution for the decay of the $J/ψ$ and $ψ(2S)$ mesons into the hyperons $Λ\overlineΛ$ and $Σ^0\overlineΣ^0$. More in details the angular distribution of the decay $ψ(2S) \to Σ^0\overlineΣ^0$ exhibits an opposite trend with respect to that of the other three channels: $J/ψ\to Λ\overlineΛ$, $J/ψ\to Σ^0\overlineΣ^0$ and $ψ(2S) \to Λ\overlineΛ$. We define a model to explain the origin of this phenomenon.

hep-ph↗

arXiv2018

R-band light-curve properties of Type Ia supernovae from the (intermediate) Palomar Transient Factory

We present the best 265 sampled R-band light curves of spectroscopically identified Type Ia supernovae (SNe) from the Palomar Transient Factory (PTF; 2009-2012) survey and the intermediate Palomar Transient Factory (iPTF; 2013-2017). A model-independent light curve template is built from our data-set with the purpose to investigate average properties and diversity in our sample. We searched for multiple populations in the light curve properties using machine learning tools. We also utilised the long history of our light curves, up to 4000 days, to exclude any significant pre- or post- supernova flares. From the shapes of light curves we found the average rise time in the R band to be $16.8^{+0.5}_{-0.6}$ days. Although PTF/iPTF were single-band surveys, by modelling the residuals of the SNe in the Hubble-Lemaître diagram, we estimate the average colour excess of our sample to be $<$E$($B$-$V$)> \approx 0.05(2)$ mag and thus the mean corrected peak brightness to be $M_R = -19.02\pm0.02$ $+5 \log( {\rm H}_0 [{\rm km} \cdot{\rm s}^{-1} {\rm Mpc}^{-1}]/70)$ mag with only weakly dependent on light curve shape. The intrinsic scatter is found to be $σ_R = 0.186 \pm 0.033$ mag for the redshift range $0.05<z<0.1$, without colour corrections of individual SNe. Our analysis shows that Malmquist bias becomes very significant at z=0.13. A similar limitation is expected for the ongoing Zwicky Transient Facility (ZTF) survey using the same telescope, but new camera expressly designed for ZTF.

astro-ph.HE↗

arXiv2018

Innovative design and construction technique for the Cylindrical GEM detector for the BESIII experiment

Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the particles and to exploit the its properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allow to create very large area GEM foils (up to 50x100 cm2) and thanks to the small thickness of these foil is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by permaglass rings glued at the edges. These rings are use to assembly the CGEM together with a dedicated Vertical Insertion System and moreover there is placed the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this presentation will be presented an overview of the construction technique and the validation of this technique through the realization of a CGEM and its first tests. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.

physics.ins-det↗

arXiv2018

Performance of the micro-TPC Reconstruction for GEM Detectors at High Rate

Gas detectors are one of the pillars of the research in fundamental physics. Since many years, a new concept of detectors, the Micro Pattern Gas Detectors, allows to overcome many of the problems of other types of commonly used detectors, as drift chambers and microstrips, reducing the discharge rate and increasing the radiation tolerance. Among these, one of the most commonly used is the Gas Electron Multiplier. Commonly deployed as fast timing detectors and triggers, due to their fast response, high rate capability and high radiation hardness, they can also be used as trackers. The center of gravity readout technique allows to overcome the limit of the digital pads, whose spatial resolution is constrained by the pitch size. The presence of a high external magnetic field can distort the electronic cloud and affect the spatial resolution. The micro-TPC reconstruction method allows to reconstruct the three dimensional particle position as in a traditional Time Projection Chamber, but within a drift gap of a few millimeters. This method brings these detectors into a new perspective for what concerns the spatial resolution in strong magnetic field. In this report, the basis of this new technique will be shown and it will be compared to the traditional center of gravity. The results of a series of test beam performed with 10 x 10 cm2 planar prototypes in magnetic field will also be presented. This is one of the first implementations of this technique for GEM detectors in magnetic field and allows to reach unprecedented performance for gas detectors, up to a limit of 120 micron at 1T, one of the world's best results for MPGDs in strong magnetic field. The micro-TPC reconstruction has been recently tested at very high rates in a test beam at the MAMI facility; preliminary results of the test will be presented.

physics.ins-det↗

arXiv2018

Test beam results of a Cylindrical GEM detector for the BESIII experiment

Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the charged particles and to exploit their properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allows to create very large area GEM foils (up to 50x100 $\mathrm{cm}^2$) and thanks to the small thickness of these foils is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by Permaglass rings glued at the edges. These rings are used to assembly the CGEM, together with a dedicated Vertical Insertion System and moreover they host the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this contribution an overview of the construction technique, the validation of this technique through the realization of a CGEM, and its first tests will be presented. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.

physics.ins-det↗

arXiv2018

The new cylindrical GEM inner tracker of BESIII

The Cylindrical GEM-Inner Tracker (CGEM-IT) is the upgrade of the internal tracking system of the BESIII experiment. It consists of three layers of cylindrically-shaped triple GEMs, with important innovations with respect to the existing GEM detectors, in order to achieve the best performance with the lowest material budget. It will be the first cylindrical GEM running with analog readout inside a 1T magnetic field. The simultaneous measurement of both the deposited charge and the signal time will permit to use a combination of two algorithms to evaluate the spatial position of the charged tracks inside the CGEM-IT: the charge centroid and the micro time projection chamber modes. They are complementary and can cope with the asymmetry of the electron avalanche when running in magnetic field and with non-orthogonal incident tracks. To evaluate the behavior under different working settings, both planar chambers and the first cylindrical prototype have been tested during various test beams at CERN with 150 GeV/c muons and pions. This paper reports the results obtained with the two reconstruction methods and a comparison between the planar and cylindrical chambers.

physics.ins-det↗

arXiv2018

Test beam results with prototypes for the new Cylindrical GEM Inner Tracker of the BESIII experiment

A cylindrical GEM tracker is under construction in order to replace and improve the inner tracking system of the BESIII experiment. Tests with planar chamber prototypes were carried out on the H4 beam line of SPS (CERN) with muons of 150 GeV/c momentum, to evaluate the efficiency and resolution under different working conditions. The obtained efficiency was in the 96 - 98% range. Two complementary algorithms for the position determination were developed: the charge centroid and the micro-TPC methods. With the former, resolutions <100 micron and <200 micron were achieved without and with magnetic field, respectively. The micro-TPC improved these results. By the end of 2016, the first cylindrical prototype was tested on the same beam line. It showed optimal stability under different settings. The comparison of its performance with respect to the planar chambers is ongoing. Here, the results of the planar prototype tests will be addressed.

physics.ins-det↗

arXiv2017

Illuminating Gravitational Waves: A Concordant Picture of Photons from a Neutron Star Merger

Merging neutron stars offer an exquisite laboratory for simultaneously studying strong-field gravity and matter in extreme environments. We establish the physical association of an electromagnetic counterpart EM170817 to gravitational waves (GW170817) detected from merging neutron stars. By synthesizing a panchromatic dataset, we demonstrate that merging neutron stars are a long-sought production site forging heavy elements by r-process nucleosynthesis. The weak gamma-rays seen in EM170817 are dissimilar to classical short gamma-ray bursts with ultra-relativistic jets. Instead, we suggest that breakout of a wide-angle, mildly-relativistic cocoon engulfing the jet elegantly explains the low-luminosity gamma-rays, the high-luminosity ultraviolet-optical-infrared and the delayed radio/X-ray emission. We posit that all merging neutron stars may lead to a wide-angle cocoon breakout; sometimes accompanied by a successful jet and sometimes a choked jet.

astro-ph.HE↗