arXiv subjects

L. Zhang

Publications and source records attributed to L. Zhang.

At least 127 records · Page 7Linked to original sources

arXiv2022

A 40 Gbps Optical Transceiver for Particle Physics Experiments

We present the design and the test results of a quad-channel optical transceiver module (QTRx) possibly for future particle physics experiments. The transmitters of QTRx, each at 10 Gbps, are based on a Quad-channel VCSEL Diode array Driver (QLDD) and 1 x 4 VCSEL array. The receivers of QTRx, with data rates of 2.56 Gbps or 10 Gbps per channel, are based on a Quad-channel Trans-Impedance and limiting Amplifier (QTIA) and 1 x 4 photodiode array of GaAs or InGaAs. QTRx is 20 mm x 10 mm x 5 mm and couples to an MT fiber connector. Test results indicate that QTRx achieves the design goals with a power consumption of 124 mW per transmitter channel at 10 Gbps and 120 mW at 2.56 Gbps for the receiver channel with an on-chip charge pump. The sensitivities of QTIA are -17 dBm at 2.56 Gbps and -8 dBm at 10 Gbps, respectively. Further improvements with a gold-finger interface and a more compact optical lens are being designed.

physics.ins-det↗

arXiv2022

A prototype optical link board with redundancy design for the ATLAS liquid argon calorimeter Phase-2 upgrade

A prototype optical-link board has been developed for the ATLAS Liquid Argon Calorimeter Phase-2 upgrade. The board consists of 24 lpGBT chips and 8 VTRx+ modules and demonstrates the full optical link design of the future front-end board. The board has 22 simplex optical links to transmit detector data, which are emulated in FPGAs and injected through 6 FMC connectors, to the off-detector electronics. The board implements 2 duplex optical links for clocks, control, and monitoring with redundant design to improve the system reliability. Data transmission and all redundant designs have been verified. A fiber routing scheme, in which 2 or 3 VTRx+ modules are re-connected to the front panel with an MPO connector, has been prototyped.

physics.ins-det↗

arXiv2022

Role of the companion lensing galaxy in the CLASS gravitational lens B1152+199

We reinvestigate the Cosmic Lens All-Sky Survey (CLASS) gravitational lens B1152+199 using archived Hubble Space Telescope (HST) data and Very Long Baseline Interferometry (VLBI) data. A consistent luminosity ratio within effective radius between the host galaxy and the X-galaxy is measured from HST tri-band images, which leads to a mass ratio between the two galaxies as $r_b\sim 2$. To determine the role of the X-galaxy in the lens system, we modelled the dual-lens system with constraints from the VLBI-resolved jet components and the HST images. The 8.4-GHz global-VLBI data currently provide the most stringent constraints to the mass model, especially to the radial power-law slope. The optimized models for this two-image three-component radio lens favour a steeper-than-isothermal inner slope. The jet bending in image B was also investigated and it turned out to be rather a misalignment than a curvature. The goodness of fit indicates that the role of the X-galaxy is crucial in the lens system if three pairs of resolved jet components are to be fitted. When we imported the optimal model from radio constraints to optical modelling with the HST tri-band data, the optimization kept the consistency of the optimal model and successfully reproduced the features observed in the HST images. This implies that the diffuse emission discovered in the HST images is actually a detection of the secondary lensing effects from the companion lens.

astro-ph.GA↗

arXiv2022

A radiation tolerant clock generator for the CMS Endcap Timing Layer readout chip

We present the test results of a low jitter Phase Locked Loop (PLL) prototype chip for the CMS Endcap Timing Layer readout chip (ETROC). This chip is based on the improved version of a clock synthesis circuit named ljCDR from the Low-Power Gigabit Transceiver (lpGBT) project. The ljCDR is tested in its PLL mode. An automatic frequency calibration (AFC) block with the Triple Modular Redundancy (TMR) register is developed for the LC-oscillator calibration. The chip was manufactured in a 65 nm CMOS process with 10 metal layers. The chip has been extensively tested, including Total Ionizing Dose (TID) testing up to 300 Mrad and Single Event Upset (SEU) testing with heavy ions possessing a Linear energy transfer (LET) from 1.3 to 62.5 MeV*cm^2/mg.

physics.ins-det↗

arXiv2022

QTIA, a 2.5 or 10 Gbps 4-Channel Array Optical Receiver ASIC in a 65 nm CMOS Technology

The Quad transimpedance and limiting amplifier (QTIA) is a 4-channel array optical receiver ASIC, developed using a 65 nm CMOS process. It is configurable between the bit rate of 2.56 Gbps and 10 Gbps per channel. QTIA offers careful matching to both GaAs and InGaAs photodiodes. At this R&D stage, each channel has a different biasing scheme to the photodiode for optimal coupling. A charge pump is implemented in one channel to provide a higher reverse bias voltage, which is especially important to mitigate radiation effects on the photodiodes. The circuit functions of QTIA successfully passed the lab tests with GaAs photodiodes.

physics.ins-det↗

arXiv2022

Characterization of Pedestal Burst Instabilities during I-mode to H-mode Transition in the EAST Tokamak

Quasi-periodic Pedestal Burst Instabilities (PBIs), featuring alternative turbulence suppression and bursts, have been clearly identified by various edge diagnostics during I-mode to H-mode transition in the EAST Tokamak. The radial distribution of the phase perturbation caused by PBI shows that PBI is localized in the pedestal. Prior to each PBI, a significant increase of density gradient close to the pedestal top can be clearly distinguished, then the turbulence burst is generated, accompanied by the relaxation of the density profile, and then induces an outward particle flux. The relative density perturbation caused by PBIs is about $6 \sim 8\%$. Statistic analyses show that the pedestal normalized density gradient triggering the first PBI has a threshold value, mostly in the range of $22 \sim 24$, suggesting that a PBI triggering instability could be driven by the density gradient. And the pedestal normalized density gradient triggering the last PBI is about $30 \sim 40$ and seems to increase with the loss power and the chord-averaged density. In addition, the frequency of PBI is likely to be inversely proportional to the chord-averaged density and the loss power. These results suggest that PBIs and the density gradient prompt increase prior to PBIs can be considered as the precursor for controlling I-H transition.

physics.plasm-ph↗

arXiv2022

A 20 Gbps PAM4 Data Transmitter ASIC for Particle Physics Experiments

We present the design and test results of a novel data transmitter ASIC operating up to 20.48 Gbps with 4-level Pulse-Amplitude-Modulation (PAM4) for particle physics experiments. This ASIC, named GBS20, is fabricated in a 65 nm CMOS technology. Two serializers share a 5.12 GHz Phase Locked Loop (PLL) clock. The outputs from the serializers are combined into a PAM4 signal that directly drives a Vertical-Cavity-Surface-Emitting-Laser (VCSEL). The input data channels, each at 1.28 Gbps, are scrambled with an internal 27-1 Pseudo-Random Binary Sequence (PRBS), which also serves as a frame aligner. GBS20 is tested to work at 10.24 and 20.48 Gbps with a VCSEL-based Transmitter-Optical-Subassembly (TOSA). The power consumption of GBS20 is below 238 mW and reduced to 164 mW in the low-power mode.

physics.ins-det↗

arXiv2021

Characterization of a CMOS pixel sensor for charged particle tracking

A prototype of the CMOS pixel sensor named SUPIX-1 has been fabricated and tested in order to investigate the feasibility of a pixelated tracker for a proposed Higgs factory, namely, the Circular Electron-Positron Collider (CEPC). The sensor, taped out with a 180 nm CMOS Image Sensor (CIS) process, consists of nine different pixel arrays varying in pixel pitches, diode sizes and geometries in order to study the particle detection performance of enlarged pixels. The test was carried out with a Fe-55 radioactive source. Two soft X-ray peaks observed were used to calibrate the charge to voltage factor of the sensor. The pixel-wise equivalent noise charge, charge collection efficiency and signal-to-noise ratio were evaluated. A reconstruction method for clustering pixels of a signal has been developed and the cluster-wise performance was studied as well. The test results show that pixels with the area as large as of $21μ$m$\times 84μ$m have satisfactory noise level and charge collection performance, meeting gerenal requirements for a pixel sensor. This contribution demonstrates that the CMOS pixel sensor with enlarged pitches, using the CIS technology, can be used in tracking for upcoming collider detectors akin to the CEPC.

physics.ins-det↗

arXiv2021

Determining impact parameters of heavy-ion collisions at low-intermediate incident energies using deep learning with convolutional neural network

A deep learning based method with the convolutional neural network (CNN) algorithm for determining the impact parameters is developed using the constrained molecular dynamics model simulations, focusing on the heavy-ion collisions at the low-intermediate incident energies from several ten to one hundred MeV/nucleon in which the emissions of heavy fragments with the charge numbers larger than 3 become crucial. To make the CNN applicable in the task of the impact parameter determination at the present energy range, specific improvements are made in the input selection, the CNN construction and the CNN training. It is demonstrated from the comparisons of the deep CNN method and the conventional methods with the impact parameter-sensitive observables, that the deep CNN method shows better performance for determining the impact parameters, especially leading to the capability of providing better recognition of the central collision events. With a proper consideration of the experimental filter effect in both training and testing processes to keep consistency with the actual experiments, the good performance of the deep CNN method holds, and shows significantly better in terms of predicting the impact parameters and recognizing the central collision events, compared to that of the conventional methods, demonstrating the superiority of the present deep CNN method. The deep CNN method with the consideration of the filter effect is applied in the deduction of nuclear stopping power. Higher accuracy for the stopping power deduction is achieved benefitting from the better impact parameter determination using the deep CNN method, compared to using the the conventional methods. This result reveals the importance to select a reliable impact parameter determination method in the experimental deduction of the nuclear stopping power as well as other observables.

nucl-th↗

arXiv2021

Unusual Emission Variations Near the Eclipse of A Black Widow PSR J1720$-$0533

We report on an {unusually} bright observation of PSR J1720$-$0533 using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). The pulsar is in a black widow system that {was discovered by the Commensal Radio Astronomy FAST Survey (CRAFTS). By coincidence, a bright scintillation maximum was simultaneous with the eclipse in our observation which allowed for precise measurements of flux density variations, as well as dispersion measure (DM) and polarization.} We found that there are quasi-periodic pulse emission variations with a modulation period of $\sim$ {22\,s} during the ingress of the eclipse, which could be caused by plasma lensing. {No such periodic modulation was found during the egress of the eclipse. } {The linear polarization of the pulsar disappears before the eclipse, even before there is a visually obvious change in DM. We also found that the pulse scattering maybe play an important role in the eclipse of PSR J1720$-$0533.}

astro-ph.HE↗

arXiv2021

A bimodal burst energy distribution of a repeating fast radio burst source

The event rate, energy distribution, and time-domain behaviour of repeating fast radio bursts (FRBs) contains essential information regarding their physical nature and central engine, which are as yet unknown. As the first precisely-localized source, FRB 121102 has been extensively observed and shows non-Poisson clustering of bursts over time and a power-law energy distribution. However, the extent of the energy distribution towards the fainter end was not known. Here we report the detection of 1652 independent bursts with a peak burst rate of 122~hr^{-1}, in 59.5 hours spanning 47 days. A peak in the isotropic equivalent energy distribution is found to be ~4.8 x 10^{37} erg at 1.25~GHz, below which the detection of bursts is suppressed. The burst energy distribution is bimodal, and well characterized by a combination of a log-normal function and a generalized Cauchy function. The large number of bursts in hour-long spans allow sensitive periodicity searches between 1 ms and 1000 s. The non-detection of any periodicity or quasi-periodicity poses challenges for models involving a single rotating compact object. The high burst rate also implies that FRBs must be generated with a high radiative efficiency, disfavoring emission mechanisms with large energy requirements or contrived triggering conditions.

astro-ph.HE↗

arXiv2021

Superconductivity in PtPb$_{4}$ with Possible Nontrivial Band Topology

Superconductivity in topological quantum materials is much sought after as it represents the key avenue to searching for topological superconductors, which host a full pairing gap in the bulk but Majorana bound states at the surface. To date, however, the simultaneous realization of nontrivial band topology and superconductivity in the same material under ambient conditions remains rare. In this paper, we study both superconducting and topological properties of a binary compound PtPb$_{4}$ ($T_c$ $\sim$ 2.7 K) that was recently reported to exhibit large Rashba splitting, inherent to the heavy 5$d$ Pt and 6$p$ Pb. We show that in PtPb$_{4}$, the specific heat jump at $T_c$ reaches $ΔC/γT_{c}$$\sim$1.70$\pm0.04$, larger than 1.43 expected for the weak-coupling BCS superconductors. Moreover, the measurement of quantum oscillation suggests the possibility for a topological band structure, which is further studied by density functional theory calculations. Our study may stimulate future experimental and theoretical investigations in this intriguing material.

cond-mat.supr-con↗

arXiv2021

The TaichuPix1: A Monolithic Active Pixel Sensor with fast in-pixel readout electronics for the CEPC vertex detector

The proposed Circular Electron Positron Collider (CEPC) imposes new challenges for the vertex detector in terms of high resolution, low material, fast readout and low power. The Monolithic Active Pixel Sensor (MAPS) technology has been chosen as one of the most promising candidates to satisfy these requirements. A MAPS prototype, called TaichuPix1, based on a data-driven structure, together with a column drain readout architecture, benefiting from the ALPIDE and FE-I3 approaches, has been implemented to achieve fast readout. This paper presents the overall architecture of TaichuPix1, the experimental characterization of the FE-I3-like matrix, the threshold dispersion, the noise distribution of the pixels and verifies the charge collection using a radioactive source. These results prove the functionality of the digital periphery and serializer are able to transmit the collected charge to the data interface correctly. Moreover, the individual self-tests of the serializer verify it can work up to about 3 Gbps. And it also indicates that the analog front-end features a fast-rising signal with a short time walk and that the FE-I3-like in-pixel digital logic is properly operating at the 40 MHz system clock.

physics.ins-det↗

arXiv2021

In-pixel automatic threshold calibration for the CMS Endcap Timing Layer readout chip

We present the implementation and verification of an in-pixel automatic threshold calibration circuit for the CMS Endcap Timing Layer (ETL) in the High-Luminosity LHC upgrade. The discriminator threshold of the ETL readout chip (ETROC) needs to be calibrated regularly to mitigate the circuit baseline change. Traditional methods need a lot of communication through a slow control system hence are time-consuming. This paper describes an in-pixel automatic scheme with improvements in operating time and usability. In this scheme, a sample-accumulation circuit is used to measure the average discriminator output. A binary successive approximation and linear combination scan are applied to find the equivalent baseline. The actual calibration procedure has been first implemented in FPGA firmware and tested with the ETROC front-end prototype chip (ETROC0). The calibration circuit has been implemented with Triple Modular Redundancy (TMR) and verified with Single Event Effects (SEEs) simulation. A complete calibration process lasts 35 ms with a 40 MHz clock. In the worst case, the dynamic and static power consumption are estimated to be 300 uW and 10.4 uW, respectively. The circuit design, implemented in a 65 CMOS technology, will be integrated into ETROC2, the next iteration of the ETROC with a 16x16 pixel matrix.

physics.ins-det↗

arXiv2021

Characterization of the CMS Endcap Timing Layer readout chip prototype with charge injection

We present the characterization of a readout Application-Specific Integrated Circuit (ASIC) for the CMS Endcap Timing Layer (ETL) of the High-Luminosity LHC upgrade with charge injection. The ASIC, named ETROC and developed in a 65 nm CMOS technology, reads out a 16x16 pixel matrix of the Low-Gain Avalanche Detector (LGAD). The jitter contribution from ETROC is required to be below 40 ps to achieve the 50 ps overall time resolution per hit. The analog readout circuits in ETROC consist of the preamplifier and the discriminator. The preamplifier handles the LGAD charge signal with the most probable value of around 15 fC. The discriminator generates the digital pulse, which provides the Time-Of-Arrival (TOA, leading edge) and Time-Over-Threshold (TOT, pulse width) information. The prototype of ETROC (ETROC0) that implements a single channel of analog readout circuits has been evaluated with charge injection. The jitter of the analog readout circuits, measured from the discriminator's leading edge, is better than 16 ps for a charge larger than 15 fC with the sensor capacitance. The time walk resulting from different pulse heights can be corrected using the TOT measurement. The time resolution distribution has a standard deviation of 29 ps after the time-walk correction from the charge injection. At room temperature, the preamplifier's power consumption is measured to be 0.74 mW and 1.53 mW per pixel in the low- and high-power mode, respectively. The measured power consumption of the discriminator is 0.84 mW per pixel. With the ASIC alone or the LGAD sensor, The characterization performances fulfill the ETL's challenging requirements.

physics.ins-det↗

arXiv2021

Extraordinary Phase Coherence Length in Epitaxial Halide Perovskites

Inorganic halide perovskites have emerged as a promising platform in a wide range of applications from solar energy harvesting to computing, and light emission. The recent advent of epitaxial thin film growth of halide perovskites has made it possible to investigate low-dimensional quantum electronic devices based on this class of materials. This study leverages advances in vapor-phase epitaxy of halide perovskites to perform low-temperature magnetotransport measurements on single-domain cesium tin iodide (CsSnI$_3$) epitaxial thin films. The low-field magnetoresistance carries signatures of coherent quantum interference effects and spin-orbit coupling. These weak anti-localization measurements reveal a micron-scale low-temperature phase coherence length for charge carriers in this system. The results indicate that epitaxial halide perovskite heterostructures are a promising platform for investigating long coherent quantum electronic effects and potential applications in spintronics and spin-orbitronics.

cond-mat.mes-hall↗

arXiv2021

On the evidence for a common-spectrum process in the search for the nanohertz gravitational-wave background with the Parkes Pulsar Timing Array

A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Waves collaboration (NANOGrav) found evidence for the common-spectrum component in their 12.5-year data set. Here we report on a search for the background using the second data release of the Parkes Pulsar Timing Array. If we are forced to choose between the two NANOGrav models $\unicode{x2014}$ one with a common-spectrum process and one without $\unicode{x2014}$ we find strong support for the common-spectrum process. However, in this paper, we consider the possibility that the analysis suffers from model misspecification. In particular, we present simulated data sets that contain noise with distinctive spectra but show strong evidence for a common-spectrum process under the standard assumptions. The Parkes data show no significant evidence for, or against, the spatially correlated Hellings-Downs signature of the gravitational-wave background. Assuming we did observe the process underlying the spatially uncorrelated component of the background, we infer its amplitude to be $A = 2.2^{+0.4}_{-0.3} \times 10^{-15}$ in units of gravitational-wave strain at a frequency of $1\, \text{yr}^{-1}$. Extensions and combinations of existing and new data sets will improve the prospects of identifying spatial correlations that are necessary to claim a detection of the gravitational-wave background.

astro-ph.HE↗

arXiv2021

Quality control tests of the front-end optical link components for the ATLAS Liquid Argon Calorimeter Phase-1 upgrade

We present the procedures and results of the quality control tests for the front-end optical link components in the ATLAS Liquid Argon Calorimeter Phase-1 upgrade. The components include a Vertical-Cavity Surface-Emitting Laser (VCSEL) driver ASIC LOCld, custom optical transmitter/transceiver modules MTx/MTRx, and a transmitter ASIC LOCx2. LOCld, MTx, and LOCx2 each contain two channels with the same structure, while MTRx has a transmitter channel and a receiver channel. Each channel is tested at 5.12 Gbps. A total of 5341 LOCld chips, 3275 MTx modules, 797 MTRx modules, and 3198 LOCx2 chips are qualified. The yields are 73.9%, 98.0%, 98.4%, and 61.9% for LOCld, LOCx2, MTx, and MTRx, respectively.

physics.ins-det↗