arXiv subjects

Lincoln J. Lauhon

Publications and source records attributed to Lincoln J. Lauhon.

At least 19 recordsLinked to original sources

arXiv2025

Robust interpretation of electrochemical impedance spectra using numerical complex analysis

Electrochemical Impedance Spectroscopy (EIS) is a non-invasive technique widely used for understanding charge transfer and charge transport processes in electrochemical systems and devices. Standard approaches for the interpretation of EIS data involve starting with a hypothetical circuit model for the physical processes in the device based on experience/intuition, and then fitting the EIS data to this circuit model. This work explores a mathematical approach for extracting key characteristic features from EIS data by relying on fundamental principles of complex analysis. These characteristic features can ascertain the presence of inductors and constant phase elements (non-ideal capacitors) in circuit models and enable us to answer questions about the identifiability and uniqueness of equivalent circuit models. In certain scenarios such as models with only resistors and capacitors, we are able to enumerate all possible families of circuit models. Finally, we apply the mathematical framework presented here to real-world electrochemical systems and highlight results using impedance measurements from a lithium-ion battery coin cell.

physics.app-ph↗

arXiv2019

Correlated nanoscale analysis of the emission from wurtzite versus zincblende (In,Ga)As/GaAs nanowire core-shell quantum wells

While the properties of wurtzite GaAs have been extensively studied during the past decade, little is known about the influence of the crystal polytype on ternary (In,Ga)As quantum well structures. We address this question with a unique combination of correlated, spatially-resolved measurement techniques on core-shell nanowires that contain extended segments of both the zincblende and wurtzite polytypes. Cathodoluminescence hyperspectral imaging reveals a blueshift of the quantum well emission energy by $75\pm15$ meV in the wurtzite polytype segment. Nanoprobe x-ray diffraction and atom probe tomography enable $\mathbf{k}\cdot\mathbf{p}$ calculations for the specific sample geometry to reveal two comparable contributions to this shift. First, there is a 30% drop in In mole fraction going from the zincblende to the wurtzite segment. Second, the quantum well is under compressive strain, which has a much stronger impact on the hole ground state in the wurtzite than in the zincblende segment. Our results highlight the role of the crystal structure in tuning the emission of (In,Ga)As quantum wells and pave the way to exploit the possibilities of three-dimensional bandgap engineering in core-shell nanowire heterostructures. At the same time, we have demonstrated an advanced characterization toolkit for the investigation of semiconductor nanostructures.

cond-mat.mes-hall↗

arXiv2018

Charge Separation at Mixed-Dimensional Single and Multilayer MoS2/Silicon Nanowire Heterojunctions

Layered two-dimensional (2-D) semiconductors can be combined with other low-dimensional semiconductors to form non-planar mixed-dimensional van der Waals (vdW) heterojunctions whose charge transport behavior is influenced by the heterojunction geometry, providing a new degree of freedom to engineer device functions. Towards that end, we investigated the photoresponse of Si nanowire/MoS2 heterojunction diodes with scanning photocurrent microscopy and time-resolved photocurrent measurements. Comparison of n-Si/MoS2 isotype heterojunctions with p-Si/MoS2 heterojunction diodes under varying biases shows that the depletion region in the p-n heterojunction promotes exciton dissociation and carrier collection. We measure an instrument limited response time of 1 us, which is 10 times faster than previously reported response times for planar Si/MoS2 devices, highlighting the advantages of the 1-D/2-D heterojunction. Finite element simulations of device models provide a detailed understanding of how the electrostatics affect charge transport in nanowire/vdW heterojunctions and inform the design of future vdW heterojunction photodetectors and transistors.

physics.app-ph↗

arXiv2018

Template-assisted scalable nanowire networks

Topological qubits based on Majorana fermions have the potential to revolutionize the emerging field of quantum computing by making information processing significantly more robust to decoherence. Nanowires (NWs) are a promising medium for hosting these kinds of qubits, though branched NWs are needed to perform qubit manipulations. Here we report gold-free templated growth of III-V NWs by molecular beam epitaxy using an approach that enables patternable and highly regular branched NW arrays on a far greater scale than what has been reported thus far. Our approach relies on the lattice-mismatched growth of InAs on top of defect-free GaAs nanomembranes (NMs) yielding laterally-oriented, low-defect InAs and InGaAs NWs whose shapes are determined by surface and strain energy minimization. By controlling NM width and growth time, we demonstrate the formation of compositionally graded NWs with cross-sections less than 50 nm. Scaling the NWs below 20 nm leads to the formation of homogenous InGaAs NWs which exhibit phase-coherent, quasi-1D quantum transport as shown by magnetoconductance measurements. These results are an important advance towards scalable topological quantum computing.

quant-ph↗

arXiv2018

Self-Aligned van der Waals Heterojunction Diodes and Transistors

A general self-aligned fabrication scheme is reported here for a diverse class of electronic devices based on van der Waals materials and heterojunctions. In particular, self-alignment enables the fabrication of source-gated transistors in monolayer MoS2 with near-ideal current saturation characteristics and channel lengths down to 135 nm. Furthermore, self-alignment of van der Waals p-n heterojunction diodes achieves complete electrostatic control of both the p-type and n-type constituent semiconductors in a dual-gated geometry, resulting in gate-tunable mean and variance of anti-ambipolar Gaussian characteristics. Through finite-element device simulations, the operating principles of source-gated transistors and dual-gated anti-ambipolar devices are elucidated, thus providing design rules for additional devices that employ self-aligned geometries. For example, the versatility of this scheme is demonstrated via contact-doped MoS2 homojunction diodes and mixed-dimensional heterojunctions based on organic semiconductors. The scalability of this approach is also shown by fabricating self-aligned short-channel transistors with sub-diffraction channel lengths in the range of 150 nm to 800 nm using photolithography on large-area MoS2 films grown by chemical vapor deposition. Overall, this self-aligned fabrication method represents an important step towards the scalable integration of van der Waals heterojunction devices into more sophisticated circuits and systems.

physics.app-ph↗

arXiv2017

Control of interlayer delocalization in 2H transition metal dichalcogenides

It is assessed in detail both experimentally and theoretically how the interlayer coupling of transition metal dichalcogenides controls the electronic properties of the respective devices. Gated transition metal dichalcogenide structures show electrons and holes to either localize in individual monolayers, or delocalize beyond multiple layers - depending on the balance between spin-orbit inter- action and interlayer hopping. This balance depends on layer thickness, momentum space symmetry points and applied gate fields. A good quantitative agreement of predictions and measurements of the quantum confined Stark effect in gated MoS2 systems unveils intralayer excitons as major source for the observed photoluminesence.

cond-mat.mes-hall↗

arXiv2017

High-Resolution Nanoscale Solid-State Nuclear Magnetic Resonance Spectroscopy

We present a new method for high-resolution nanoscale magnetic resonance imaging (nano-MRI) that combines the high spin sensitivity of nanowire-based magnetic resonance detection with high spectral resolution nuclear magnetic resonance (NMR) spectroscopy. By applying NMR pulses designed using optimal control theory, we demonstrate a factor of $500$ reduction of the proton spin resonance linewidth in a $(50\text{-nm})^{\text{3}}$ volume of polystyrene and image proton spins in one dimension with a spatial resolution below $2~\text{nm}$.

cond-mat.mes-hall↗

arXiv2015

Hybrid, Gate-Tunable, van der Waals p-n Heterojunctions from Pentacene and MoS2

The recent emergence of a wide variety of two-dimensional (2D) materials has created new opportunities for device concepts and applications. In particular, the availability of semiconducting transition metal dichalcogenides, in addition to semi-metallic graphene and insulating boron nitride, has enabled the fabrication of all 2D van der Waals heterostructure devices. Furthermore, the concept of van der Waals heterostructures has the potential to be significantly broadened beyond layered solids. For example, molecular and polymeric organic solids, whose surface atoms possess saturated bonds, are also known to interact via van der Waals forces and thus offer an alternative for scalable integration with 2D materials. Here, we demonstrate the integration of an organic small molecule p-type semiconductor, pentacene, with a 2D n-type semiconductor, MoS2. The resulting p-n heterojunction is gate-tunable and shows asymmetric control over the anti-ambipolar transfer characteristic. In addition, the pentacene-MoS2 heterojunction exhibits a photovoltaic effect attributable to type II band alignment, which suggests that MoS2 can function as an acceptor in hybrid solar cells.

cond-mat.mtrl-sci↗

arXiv2015

Investigation of Band-Offsets at Monolayer-Multilayer MoS2 Junctions by Scanning Photocurrent Microscopy

The thickness-dependent band structure of MoS2 implies that discontinuities in energy bands exist at the interface of monolayer (1L) and multilayer (ML) thin films. The characteristics of such heterojunctions are analyzed here using current versus voltage measurements, scanning photocurrent microscopy, and finite element simulations of charge carrier transport. Rectifying I-V curves are consistently observed between contacts on opposite sides of 1L-ML junctions, and a strong bias-dependent photocurrent is observed at the junction. Finite element device simulations with varying carrier concentrations and electron affinities show that a type II band alignment at single layer/multi-layer junctions reproduces both the rectifying electrical characteristics and the photocurrent response under bias. However, the zero-bias junction photocurrent and its energy dependence are not explained by conventional photovoltaic and photothermoelectric mechanisms, indicating the contributions of hot carriers.

cond-mat.mes-hall↗

arXiv2014

Large-area, low-voltage, anti-ambipolar heterojunctions from solution-processed semiconductors

The emergence of semiconducting materials with inert or dangling bond-free surfaces has created opportunities to form van der Waals heterostructures without the constraints of traditional epitaxial growth. For example, layered two-dimensional (2D) semiconductors have been incorporated into heterostructure devices with gate-tunable electronic and optical functionalities. However, 2D materials present processing challenges that have prevented these heterostructures from being produced with sufficient scalability and/or homogeneity to enable their incorporation into large-area integrated circuits. Here, we extend the concept of van der Waals heterojunctions to semiconducting p-type single-walled carbon nanotube (s-SWCNT) and n-type amorphous indium gallium zinc oxide (a-IGZO) thin films that can be solution-processed or sputtered with high spatial uniformity at the wafer scale. The resulting large-area, low-voltage p-n heterojunctions exhibit anti-ambipolar transfer characteristics with high on/off ratios that are well-suited for electronic, optoelectronic, and telecommunication technologies.

cond-mat.mtrl-sci↗

arXiv2014

Effective Passivation of Exfoliated Black Phosphorus Transistors against Ambient Degradation

Unencapsulated, exfoliated black phosphorus (BP) flakes are found to chemically degrade upon exposure to ambient conditions. Atomic force microscopy, electrostatic force microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy are employed to characterize the structure and chemistry of the degradation process, suggesting that O2 saturated H2O irreversibly reacts with BP to form oxidized phosphorus species. This interpretation is further supported by the observation that BP degradation occurs more rapidly on hydrophobic octadecyltrichlorosilane self-assembled monolayers and on H-Si(111), versus hydrophilic SiO2. For unencapsulated BP field-effect transistors, the ambient degradation causes large increases in threshold voltage after 6 hours in ambient, followed by a ~10^3 decrease in FET current on/off ratio and mobility after 48 hours. Atomic layer deposited AlOx overlayers effectively suppress ambient degradation, allowing encapsulated BP FETs to maintain high on/off ratios of ~10^3 and mobilities of ~100 cm2/(V*s) for over two weeks in ambient. This work shows that the ambient degradation of BP can be managed effectively when the flakes are sufficiently passivated. In turn, our strategy for enhancing BP environmental stability will accelerate efforts to implement BP in electronic and optoelectronic applications.

cond-mat.mes-hall↗

arXiv2014

Influence of Stoichiometry on the Optical and Electrical Properties of Chemical Vapor Deposition Derived MoS$_{2}$

Ultrathin transition metal dichalcogenides (TMDCs) of Mo and W show great potential for digital electronics and optoelectronic applications. Whereas early studies were limited to mechanically exfoliated flakes, the large-area synthesis of 2D TMDCs has now been realized by chemical vapor deposition (CVD) based on a sulfurization reaction. Since then, the optoelectronic properties of CVD grown monolayer MoS$_{2}$ have been heavily investigated, but the influence of stoichiometry on the electrical and optical properties has been largely overlooked. Here we systematically vary the stoichiometry of monolayer MoS$_{2}$ during CVD via controlled sulfurization and investigate the associated changes in photoluminescence and electrical properties. X-ray photoelectron spectroscopy is employed to measure relative variations in stoichiometry and the persistence of MoO$_{x}$ species. As MoS$_{2-δ}$ is reduced (increasing δ), the field-effect mobility of monolayer transistors increases while the photoluminescence yield becomes non-uniform. Devices fabricated from monolayers with the lowest sulfur content have negligible hysteresis and a threshold voltage of ~0 V. We conclude that the electrical and optical properties of monolayer MoS$_{2}$ crystals can be tuned via stoichiometry engineering to meet the requirements of various applications.

cond-mat.mtrl-sci↗

arXiv2014

Wafer-scale solution-derived molecular gate dielectrics for low-voltage graphene electronics

Graphene field-effect transistors are integrated with solution-processed multilayer hybrid organic-inorganic self-assembled nanodielectrics (SANDs). The resulting devices exhibit low-operating voltage (2 V), negligible hysteresis, current saturation with intrinsic gain > 1.0 in vacuum (pressure < 2 x 10-5 Torr), and overall improved performance compared to control devices on conventional SiO2 gate dielectrics. Statistical analysis of the field-effect mobility and residual carrier concentration demonstrate high spatial uniformity of the dielectric interfacial properties and graphene transistor characteristics over full 3 inch wafers. This work thus establishes SANDs as an effective platform for large-area, high-performance graphene electronics.

cond-mat.mtrl-sci↗

arXiv2014

Emerging Device Applications for Semiconducting Two-Dimensional Transition Metal Dichalcogenides

With advances in exfoliation and synthetic techniques, atomically thin films of semiconducting transition metal dichalcogenides have recently been isolated and characterized. Their two-dimensional structure, coupled with a direct band gap in the visible portion of the electromagnetic spectrum, suggests suitability for digital electronics and optoelectronics. Towards that end, several classes of high-performance devices have been reported along with significant progress in understanding their physical properties. Here, we present a review of the architecture, operating principles, and physics of electronic and optoelectronic devices based on ultrathin transition metal dichalcogenide semiconductors. By critically assessing and comparing the performance of these devices with competing technologies, the merits and shortcomings of this emerging class of electronic materials are identified, thereby providing a roadmap for future development.

cond-mat.mes-hall↗

arXiv2014

Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing

In the last three decades, zero-dimensional, one-dimensional, and two-dimensional carbon nanomaterials (i.e., fullerenes, carbon nanotubes, and graphene, respectively) have attracted significant attention from the scientific community due to their unique electronic, optical, thermal, mechanical, and chemical properties. While early work showed that these properties could enable high performance in selected applications, issues surrounding structural inhomogeneity and imprecise assembly have impeded robust and reliable implementation of carbon nanomaterials in widespread technologies. However, with recent advances in synthesis, sorting, and assembly techniques, carbon nanomaterials are experiencing renewed interest as the basis of numerous scalable technologies. Here, we present an extensive review of carbon nanomaterials in electronic, optoelectronic, photovoltaic, and sensing devices with a particular focus on the latest examples based on the highest purity samples. Specific attention is devoted to each class of carbon nanomaterial, thereby allowing comparative analysis of the suitability of fullerenes, carbon nanotubes, and graphene for each application area. In this manner, this article will provide guidance to future application developers and also articulate the remaining research challenges confronting this field.

cond-mat.mes-hall↗

arXiv2013

Gate-tunable carbon nanotube-MoS2 heterojunction p-n diode

The p-n junction diode and field-effect transistor (FET) are the two most ubiquitous building blocks of modern electronics and optoelectronics. In recent years, the emergence of reduced dimensionality materials has suggested that these components can be scaled down to atomic thicknesses. Although high performance field-effect devices have been achieved from monolayered materials and their heterostructures, a p-n heterojunction diode derived from ultrathin materials is notably absent and constrains the fabrication of complex electronic and optoelectronic circuits. Here, we demonstrate a gate-tunable p-n heterojunction diode using semiconducting single-walled carbon nanotubes (s-SWCNTs) and single-layer molybdenum disulfide (SL-MoS2) as p-type and n-type semiconductors, respectively. The vertical stacking of these two direct band gap semiconductors forms a heterojunction with electrical characteristics that can be tuned with an applied gate bias to achieve a wide range of charge transport behavior ranging from insulating to rectifying with forward-to-reverse bias current ratios exceeding 10^4. This heterojunction diode also responds strongly to optical irradiation with an external quantum efficiency (EQE) of 25% and fast photoresponse < 15 μs. Since SWCNTs have a diverse range of electrical properties as a function of chirality, and since an increasing number of atomically thin 2D nanomaterials are being isolated, the gate-tunable p-n heterojunction concept presented here should be widely generalizable to realize diverse ultrathin, high-performance electronics and optoelectronics.

cond-mat.mtrl-sci↗

arXiv2013

Low Frequency Electronic Noise in Single-Layer MoS2 Transistors

Ubiquitous low frequency 1/f noise can be a limiting factor in the performance and application of nanoscale devices. Here, we quantitatively investigate low frequency electronic noise in single-layer transition metal dichalcogenide MoS2 field-effect transistors. The measured 1/f noise can be explained by an empirical formulation of mobility fluctuations with the Hooge parameter ranging between 0.005 and 2.0 in vacuum (< 10-5 Torr). The field-effect mobility decreased and the noise amplitude increased by an order of magnitude in ambient conditions, revealing the significant influence of atmospheric adsorbates on charge transport. In addition, single Lorentzian generation-recombination noise was observed to increase by an order of magnitude as the devices were cooled from 300 K to 6.5 K.

cond-mat.mes-hall↗

arXiv2013

Elucidating the photoresponse of ultrathin MoS2 field-effect transistors by scanning photocurrent microscopy

The mechanisms underlying the intrinsic photoresponse of few-layer (FL) molybdenum disulphide (MoS2) field-effect transistors are investigated via scanning photocurrent microscopy. We attribute the locally enhanced photocurrent to band-bending assisted separation of photoexcited carriers at the MoS2/Au interface. The wavelength-dependent photocurrents of few layer MoS2 transistors qualitatively follow the optical absorption spectra of MoS2, providing direct evidence of interband photoexcitation. Time and spectrally resolved photocurrent measurements at varying external electric fields and carrier concentrations establish that drift-diffusion currents dominate photothermoelectric currents in devices under bias.

cond-mat.mes-hall↗