arXiv subjects

Ling-Jie Zhou

Publications and source records attributed to Ling-Jie Zhou.

28 records · Page 2Linked to original sources

arXiv2022

Electrical Switching of the Edge Current Chirality in Quantum Anomalous Hall Insulators

A quantum anomalous Hall (QAH) insulator is a topological state of matter, in which the interior is insulating but electrical current flows along the edges of the sample, in either clockwise (right-handed) or counter-clockwise (left-handed) direction dictated by the spontaneous magnetization orientation. Such chiral edge current (CEC) eliminates any backscattering, giving rise to quantized Hall resistance and zero longitudinal resistance. In this work, we fabricate mesoscopic QAH sandwich (i.e. magnetic topological insulator (TI)/TI/magnetic TI) Hall bar devices and succeed in switching the CEC chirality in QAH insulators through spin-orbit torque (SOT) by applying a current pulse and suitably controlled gate voltage. The well-quantized QAH states with opposite CEC chiralities are demonstrated through four- and three-terminal measurements before and after SOT switching. Our theoretical calculations show that the SOT that enables the magnetization switching can be generated by both bulk and surface carriers in QAH insulators, in good agreement with experimental observations. Current pulse-induced switching of the CEC chirality in QAH insulators will not only advance our knowledge in the interplay between magnetism and topological states but also expedite easy and instantaneous manipulation of the QAH state in proof-of-concept energy-efficient electronic and spintronic devices as well as quantum information applications.

cond-mat.mes-hall↗

arXiv2022

Crossover of Ising- to Rashba-Type Superconductivity in Epitaxial Bi2Se3/Monolayer NbSe2 Heterostructures

A topological insulator (TI) interfaced with an s-wave superconductor has been predicted to host an unusual form of superconductivity known as topological superconductivity (TSC). Molecular beam epitaxy (MBE) has been the primary approach in the scalable synthesis of the TI/superconductor heterostructures. Although the growth of epitaxial TI films on s-wave superconductors has been achieved, it remains an outstanding challenge for synthesizing atomically thin TI/superconductor heterostructures, which are critical for engineering the TSC phase. Here, we used MBE to grow Bi2Se3 films with the controlled thickness on monolayer NbSe2 and performed in-situ angle-resolved photoemission spectroscopy and ex-situ magneto-transport measurements on these Bi2Se3/monolayer NbSe2 heterostructures. We found that the emergence of Rashba-type bulk quantum well bands and spin-nondegenerate surface states coincides with a marked suppression of the in-plane upper critical magnetic field of the superconductivity in Bi2Se3/monolayer NbSe2 heterostructures. This is the signature of a crossover from Ising- to Rashba-type superconducting pairings, induced by altering Bi2Se3 film thickness. Our work opens a new route for exploring a robust TSC phase in TI/Ising superconductor heterostructures.

cond-mat.supr-con↗

arXiv2022

Elucidating proximity magnetism through polarized neutron reflectometry and machine learning

Polarized neutron reflectometry is a powerful technique to interrogate the structures of multilayered magnetic materials with depth sensitivity and nanometer resolution. However, reflectometry profiles often inhabit a complicated objective function landscape using traditional fitting methods, posing a significant challenge to parameter retrieval. In this work, we develop a data-driven framework to recover the sample parameters from polarized neutron reflectometry data with minimal user intervention. We train a variational autoencoder to map reflectometry profiles with moderate experimental noise to an interpretable, low-dimensional space from which sample parameters can be extracted with high resolution. We apply our method to recover the scattering length density profiles of the topological insulator-ferromagnetic insulator heterostructure Bi$_2$Se$_3$/EuS exhibiting proximity magnetism, in good agreement with the results of conventional fitting. We further analyze a more challenging reflectometry profile of the topological insulator-antiferromagnet heterostructure (Bi,Sb)$_2$Te$_3$/Cr$_2$O$_3$ and identify possible interfacial proximity magnetism in this material. We anticipate the framework developed here can be applied to resolve hidden interfacial phenomena in a broad range of layered systems.

cond-mat.mtrl-sci↗

arXiv2021

Zero Magnetic Field Plateau Phase Transition in Higher Chern Number Quantum Anomalous Hall Insulators

The plateau-to-plateau transition in quantum Hall effect under high magnetic fields is a celebrated quantum phase transition between two topological states through either sweeping the magnetic field or tuning the carrier density. The recent realization of the quantum anomalous Hall (QAH) insulators with tunable Chern numbers introduces the channel degree of freedom to the dissipation-free chiral edge transport and makes the study of the quantum phase transition between two topological states under zero magnetic field possible. Here, we synthesized the magnetic topological insulator (TI)/TI penta-layer heterostructures with different Cr doping concentrations in the middle magnetic TI layers using molecular beam epitaxy (MBE). By performing transport measurements, we found a zero magnetic field quantum phase transition between the C = 1 and C = 2 QAH states. In tuning the transition, the Hall resistance monotonically decreases from h/e2 to h/2e2, concurrently, the longitudinal resistance exhibits a maximum at the critical point. Our results show that the ratio between the Hall resistance and the longitudinal resistance is greater than 1 at the critical point, which indicates that the original chiral edge channel from the C = 1 QAH state coexists with the dissipative bulk conduction channels. Subsequently, these bulk conduction channels appear to self-organize and form the second chiral edge channel in completing the plateau phase transition. Our study will motivate further investigations of this novel Chern number change-induced quantum phase transition and advance the development of the QAH chiral edge current-based electronic and spintronic devices.

cond-mat.mes-hall↗

arXiv2021

Even-Odd Layer-Dependent Anomalous Hall Effect in Topological Magnet MnBi2Te4 Thin Films

A central theme in condensed matter physics is to create and understand the exotic states of matter by incorporating magnetism into topological materials. One prime example is the quantum anomalous Hall (QAH) state. Recently, MnBi2Te4 has been demonstrated to be an intrinsic magnetic topological insulator and the QAH effect was observed in exfoliated MnBi2Te4 flakes. Here, we used molecular beam epitaxy (MBE) to grow MnBi2Te4 films with thickness down to 1 septuple layer (SL) and performed thickness-dependent transport measurements. We observed a non-square hysteresis loop in the antiferromagnetic state for films with thickness greater than 2 SL. The hysteresis loop can be separated into two AH components. Through careful analysis, we demonstrated that one AH component with the larger coercive field is from the dominant MnBi2Te4 phase, while the other AH component with the smaller coercive field is from the minor Mn-doped Bi2Te3 phase in the samples. The extracted AH component of the MnBi2Te4 phase shows a clear even-odd layer-dependent behavior, a signature of antiferromagnetic thin films. Our studies reveal insights on how to optimize the MBE growth conditions to improve the quality of MnBi2Te4 films, in which the QAH and other exotic states are predicted.

cond-mat.mtrl-sci↗

arXiv2021

Large Gap Quantum Anomalous Hall Effect in a Type-I Heterostructure Between a Magnetically Doped Topological Insulator and Antiferromagnetic Insulator

Heterostructures between topological insulators (TI) and magnetic insulators represent a pathway to realize the quantum anomalous Hall effect (QAHE). Using density functional theory based systematic screening and investigation of thermodynamic, magnetic and topological properties of heterostructures, we demonstrate that forming a type-I heterostructure between a wide gap antiferromagnetic insulator Cr$_2$O$_3$ and a TI-film, such as Sb$_2$Te$_3$, can lead to pinning of the Fermi-level at the center of the gap, even when magnetically doped. Cr-doping in the heterostructure increases the gap to $\sim$ 64.5 meV, with a large Zeeman energy from the interfacial Cr dopants, thus overcoming potential metallicity due to band bending effects. By fitting the band-structure around the Fermi-level to a 4-band k.p model Hamiltonian, we show that Cr doped Sb$_2$Te$_3$/Cr$_2$O$_3$ is a Chern insulator with a Chern number C = -1. Transport calculations further show chiral edge-modes localized at the top/bottom of the TI-film to be the dominant current carriers in the material. Our predictions of a large interfacial magnetism due to Cr-dopants, that coupled antiferromagnetically to the AFM substrate is confirmed by our polarised neutron reflectometry measurements on MBE grown Cr doped Sb$_2$Te$_3$/Cr$_2$O$_3$ heterostructures, and is consistent with a positive exchange bias measured in such systems recently. Consequently, Cr doped Sb$_2$Te$_3$/Cr$_2$O$_3$ heterostructure represents a promising platform for the development of functional topological magnetic devices, with high tunability.

cond-mat.mtrl-sci↗

arXiv2021

Local manifestations of thickness dependent topology and axion edge state in topological magnet MnBi$_2$Te$_4$

The interplay of non-trivial band topology and magnetism gives rise to a series of exotic quantum phenomena, such as the emergent quantum anomalous Hall (QAH) effect and topological magnetoelectric effect. Many of these quantum phenomena have local manifestations when the global symmetry is broken. Here, we report local signatures of the thickness dependent topology in intrinsic magnetic topological insulator MnBi$_2$Te$_4$(MBT), using scanning tunneling microscopy and spectroscopy on molecular beam epitaxy grown MBT thin films. A thickness-dependent band gap with an oscillatory feature is revealed, which we reproduce with theoretical calculations. Our theoretical results indicate a topological quantum phase transition beyond a film thickness of one monolayer, with alternating QAH and axion insulating states for even and odd layers, respectively. At an even-odd layer step, a localized gapped electronic state is observed, in agreement with an axion insulator edge state that results from a phase transition across the step. The demonstration of thickness-dependent topological properties highlights the role of nanoscale control over novel quantum states, reinforcing the necessity of thin film technology in quantum information science applications.

cond-mat.mes-hall↗

arXiv2020

Surface Charge Induced Dirac Band Splitting in a Charge Density Wave Material (TaSe4)2I

(TaSe4)2I, a quasi-one-dimensional (1D) crystal, shows a characteristic temperature-driven metal-insulator phase transition. Above the charge density wave (CDW) temperature Tc, (TaSe4)2I has been predicted to harbor a Weyl semimetal phase. Below Tc, it becomes an axion insulator. Here, we performed angle-resolved photoemission spectroscopy (ARPES) measurements on the (110) surface of (TaSe4)2I and observed two sets of Dirac-like energy bands in the first Brillion zone, which agree well with our first-principles calculations. Moreover, we found that each Dirac band exhibits an energy splitting of hundreds of meV under certain circumstances. In combination with core level measurements, our theoretical analysis showed that this Dirac band splitting is a result of surface charge polarization due to the loss of surface iodine atoms. Our findings here shed new light on the interplay between band topology and CDW order in Peierls compounds and will motivate more studies on topological properties of strongly correlated quasi-1D materials.

cond-mat.str-el↗

arXiv2020

Interface-Induced Sign Reversal of the Anomalous Hall Effect in Magnetic Topological Insulator Heterostructures

The Berry phase picture provides important insights into the electronic properties of condensed matter systems. The intrinsic anomalous Hall (AH) effect can be understood as a consequence of non-zero Berry curvature in momentum space. The realization of the quantum anomalous Hall effect provided conclusive evidence for the intrinsic mechanism of the AH effect in magnetic topological insulators (TIs). Here we fabricated magnetic TI/TI heterostructures and found both the magnitude and sign of the AH effect in the magnetic TI layer can be altered by tuning the TI thickness and/or the electric gate voltage. The sign change of the AH effect with increasing TI thickness is attributed to the charge transfer across the TI and magnetic TI layers, consistent with first-principles calculations. By fabricating the magnetic TI/TI/magnetic TI sandwich heterostructures with different dopants, we created an artificial topological Hall (TH) effect-like feature in Hall traces. This artificial TH effect is induced by the superposition of two AH effects with opposite signs instead of the formation of chiral spin textures in the samples. Our study provides a new route to engineer the Berry curvature in magnetic topological materials that may lead to potential technological applications.

cond-mat.mes-hall↗

arXiv2020

Tuning Chern Number in Quantum Anomalous Hall Insulators

The quantum anomalous Hall (QAH) state is a two-dimensional topological insulating state that has quantized Hall resistance of h/Ce2 and vanishing longitudinal resistance under zero magnetic field, where C is called the Chern number. The QAH effect has been realized in magnetic topological insulators (TIs) and magic-angle twisted bilayer graphene. Despite considerable experimental efforts, the zero magnetic field QAH effect has so far been realized only for C = 1. Here we used molecular beam epitaxy to fabricate magnetic TI multilayers and realized the QAH effect with tunable Chern number C up to 5. The Chern number of these QAH insulators is tuned by varying the magnetic doping concentration or the thickness of the interior magnetic TI layers in the multilayer samples. A theoretical model is developed to understand our experimental observations and establish phase diagrams for QAH insulators with tunable Chern numbers. The realization of QAH insulators with high tunable Chern numbers facilitates the potential applications of dissipationless chiral edge currents in energy-efficient electronic devices and opens opportunities for developing multi-channel quantum computing and higher-capacity chiral circuit interconnects.

cond-mat.mes-hall↗