arXiv subjects

Lingling Qiao

Publications and source records attributed to Lingling Qiao.

45 records · Page 3Linked to original sources

arXiv2015

Spatiotemporal focusing does not always improve axial intensity localization

We report on an experimental comparison on critical intensities of nonlinear self-focusing in air with conventional focusing and spatiotemporal focusing schemes. Our results show that the conventional focusing with the focal lens completely filled with the incident beam allows for the strongest axial intensity confinement against the self-focusing effect. This is because that in the high-numerical-aperture condition, the focal spot will have a compact size which results in a high focal intensity. Meanwhile, the Rayleigh length of the focused beam will be substantially shortened which efficiently postpones the onset of self-focusing.

physics.optics↗

arXiv2014

On-chip tuning of the resonant wavelength in a high-Q microresonator integrated with a microheater

We report on fabrication of a microtoroid resonator of high-quality (high-Q) factor integrated with an on-chip microheater. Both the microresonator and microheater are fabricated using femtosecond laser three-dimensional (3D) micromachining. The microheater, which is located about 200 micron away from the microresonator, has a footprint size of 200 micron by 400 micron. Tuning of the resonant wavelength in the microresonator has been achieved by varying the voltage applied on the microheater. The drifting of the resonant wavelength shows a linear dependence on the square of the voltage applied on the microheater. We found that the response time of the microresonator is less than 10 secs which is significantly shorter than the time required for reaching a thermal equilibrium on conventional heating instruments such as an external electric heater.

physics.optics↗

arXiv2014

Plasma waves excited at interface by femtosecond laser irradiation enabling formation of volume nanograting in glass

Irradiation of intense ultrafast laser pulses in glasses can lead to formation of nanogratings whose periods are significantly smaller than the incident irradiation wavelength. The mechanism of the exotic phenomenon is still under debate. Here, we access the snapshots of morphologies in the laser affected regions in a porous glass which reveal the evolution of the formation of nanogratings with increasing number of laser pulses. Combined with further theoretical analyses, our observation provides important clues which suggest that excitation of standing plasma waves at the interfaces between areas modified and unmodified by the femtosecond laser irradiation plays a crucial role for promoting the growth of periodic nanogratings. The finding indicates that the formation of volume nanogratings induced by irradiation of femtosecond laser pulses is initiated with a mechanism similar to the formation of surface nanoripples.

physics.optics↗

arXiv2014

Second harmonic generation in a high-Q lithium niobate microresonator fabricated by femtosecond laser micromachining

We report on fabrication of high Q lithium niobate (LN) whispering-gallery-mode (WGM) microresonators suspended on silica pedestals by femtosecond laser microfabrication. The micrometer-scale (diameter ~82 μm) LN resonator possesses a Q factor of 2.5x10^5 around 1550 nm wavelength range. Moreover, second harmonic generation with a continuous-wave tunable single-longitudinal-mode pump laser in the on-chip LN microresonator is demonstrated in the on-chip LN microresonator. A fiber taper is employed to couple the pump laser into the microresonator, showing a normalized conversion efficiency of 1.35x10^-5/mW.

physics.optics↗

arXiv2014

Interferometric characterization of pulse front tilt of spatiotemporally focused femtosecond laser pulses for three-dimensional micromachining application

We report on an experimental measurement of the pulse front tilt (PFT) of spatiotemporally focused femtosecond laser pulses in the focal plane in both air and bulk transparent materials, which is achieved by examination of the interference pattern between the spatiotemporally focused pulse and a conventional focused reference pulse as a function of time delay between the two pulses. Our simulation results agree well with the experimental observations.

physics.optics↗

arXiv2014

Fabrication of an integrated high-quality-factor (high-Q) optofluidic sensor by femtosecond laser micromachining

We report on fabrication of a microtoroid resonator of a high-quality factor (i. e., Q-factor of ~3.24x10^6 measured under the critical coupling condition) integrated in a microfluidic channel using femtosecond laser three-dimensional (3D) micromachining. Coupling of light into and out of the microresonator has been realized with a fiber taper that is reliably assembled with the microtoroid. The assembly of the fiber to the microtoroid is achieved by welding the fiber taper onto the sidewall of the microtoroid using CO_2 laser irradiation. The integrated microresonator maintains a high Q-factor of 3.21x10^5 as measured in air, which should still be sufficient for many sensing applications. We test the functionality of the integrated optofluidic sensor by performing bulk refractive index sensing of purified water doped with tiny amount of salt. It is shown that a detection limit of ~1.2x10^-4 refractive index unit can be achieved. Our result showcases the capability of integration of high-Q microresonators with complex microfluidic systems using femtosecond laser 3D micromachining.

physics.optics↗

arXiv2014

Integration of an optical fiber taper with an optical microresonator fabricated in glass by femtosecond laser 3D micromachining

We report on fabrication of a microtoroid resonator of a high-quality factor (i. e., Q-factor of ~3.24x10^6 measured under the critical coupling condition) using femtosecond laser three-dimensional (3D) micromachining. Coupling of light into and out of the microresonator has been realized with a fiber taper that is reliably assembled with the microtoroid. The assembly of the fiber taper to the microtoroid is achieved by welding the fiber taper onto the sidewall of the microtoroid using CO2 laser irradiation. The integrated microresonator maintains a high Q-factor of 3.21x10^5 as measured in air.

physics.optics↗

arXiv2012

Femtosecond laser nanostructuring in glass with sub-50nm feature sizes

We report on controllable production of nanostructures embedded in a porous glass substrate by femtosecond laser direct writing. We show that a hollow nano-void with a lateral size of ~40 nm and an axial size of ~1500 nm can be achieved by manipulating the peak intensity and polarization of the writing laser beam. Our finding enables direct construction of 3D nanofluidics inside glass.

physics.optics↗

arXiv2012

On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing

We report on the fabrication of three-dimensional (3D) high-Q whispering gallery microcavities on a fused silica chip by femtosecond laser microfabriction, enabled by the 3D nature of femtosecond laser direct writing. The processing mainly consists of formation of freestanding microdisks by femtosecond laser direct writing and subsequent wet chemical etching. CO2 laser annealing is followed to smooth the microcavity surface. Microcavities with arbitrary tilting angle, lateral and vertical positioning are demonstrated, and the quality (Q)-factor of a typical microcavity is measured to be up to 1.07x10^6, which is currently limited by the low spatial resolution of motion stage used during the laser patterning and can be improved with motion stages of higher resolutions.

physics.optics↗