arXiv subjects

Linglong Dai

Publications and source records attributed to Linglong Dai.

At least 109 records · Page 6Linked to original sources

arXiv2020

Deep Learning for Wireless Communications: An Emerging Interdisciplinary Paradigm

Wireless communications are envisioned to bring about dramatic changes in the future, with a variety of emerging applications, such as virtual reality (VR), Internet of things (IoT), etc., becoming a reality. However, these compelling applications have imposed many new challenges, including unknown channel models, low-latency requirement in large-scale super-dense networks, etc. The amazing success of deep learning (DL) in various fields, particularly in computer science, has recently stimulated increasing interest in applying it to address those challenges. Hence, in this review, a pair of dominant methodologies of using DL for wireless communications are investigated. The first one is DL-based architecture design, which breaks the classical model-based block design rule of wireless communications in the past decades. The second one is DL-based algorithm design, which will be illustrated by several examples in a series of typical techniques conceived for 5G and beyond. Their principles, key features, and performance gains will be discussed. Furthermore, open problems and future research opportunities will also be pointed out, highlighting the interplay between DL and wireless communications. We expect that this review can stimulate more novel ideas and exciting contributions for intelligent wireless communications.

eess.SP↗

arXiv2020

Capacity Improvement in Wideband Reconfigurable Intelligent Surface-Aided Cell-Free Network

Thanks to the strong ability against the inter-cell interference, cell-free network has been considered as a promising technique to improve the network capacity of future wireless systems. However, for further capacity enhancement, it requires to deploy more base stations (BSs) with high cost and power consumption. To address the issue, inspired by the recently proposed technique called reconfigurable intelligent surface (RIS), we propose the concept of RIS-aided cell-free network to improve the network capacity with low cost and power consumption. Then, for the proposed RIS-aided cell-free network in the typical wideband scenario, we formulate the joint precoding design problem at the BSs and RISs to maximize the network capacity. Due to the non-convexity and high complexity of the formulated problem, we develop an alternating optimization algorithm to solve this challenging problem. Note that most of the considered scenarios in existing works are special cases of the general scenario in this paper, and the proposed joint precoding framework can also serve as a general solution to maximize the capacity in most of existing RIS-aided scenarios. Finally, simulation results verify that, compared with the conventional cell-free network, the network capacity of the proposed scheme can be improved significantly.

cs.IT↗

arXiv2020

THz Precoding for 6G: Applications, Challenges, Solutions, and Opportunities

Benefiting from the ultra-wide bandwidth, terahertz (THz) communication is becoming a promising technology for future 6G networks. For THz communication, precoding is an essential technique to overcome the severe path loss of THz signals in order to support the desired coverage. In this article, we systematically investigate the dominant THz precoding techniques for future 6G networks, with the highlight on its key challenges and opportunities. Specifically, we first illustrate three typical THz application scenarios including indoor, mobile, and satellite communications. Then, the major differences between millimeter-wave and THz channels are explicitly clarified, based on which we reveal the key challenges of THz precoding, such as the distance-dependent path loss, the beam split effect, and the high power consumption. To address these challenges, three representative THz precoding techniques, i.e., analog beamforming, hybrid precoding, and delay-phase precoding, are extensively investigated in terms of their different structures, designs, most recent results, pros and cons. We also provide simulation results of spectrum and energy efficiencies to compare these typical THz precoding schemes to draw some insights for their applications in future 6G networks. Finally, several important open issues and the potential research opportunities, such as the use of reconfigurable intelligent surface (RIS) to solve the THz blockage problem, are pointed out and discussed.

cs.IT↗

arXiv2020

Two-Timescale Channel Estimation for Reconfigurable Intelligent Surface Aided Wireless Communications

Channel estimation is challenging for the reconfigurable intelligent surface (RIS)-aided wireless communications. Since the number of coefficients of the cascaded channel among the base station (BS), the RIS and the user equipments (UEs) is the product of the number of BS antennas, the number of RIS elements, and the number of UEs, the pilot overhead can be prohibitively high. In this paper, we propose a two-timescale channel estimation framework to exploit the property that the BS-RIS channel is high-dimensional but quasi-static, while the RIS-UE channel is mobile but low-dimensional. Specifically, to estimate the quasi-static BS-RIS channel, we propose a dual-link pilot transmission scheme, where the BS transmits downlink pilots and receives uplink pilots reflected by the RIS. Then, we propose a coordinate descent-based algorithm to recover the BS-RIS channel. Since the quasi-static BS-RIS channel is estimated less frequently than the mobile channel be, the average pilot overhead can be reduced from a long-term perspective. Although the mobile RIS-UE channel has to be frequently estimated in a small timescale, the associated pilot overhead is low thanks to its low dimension. Simulation results show that the proposed two-timescale channel estimation framework can achieve accurate channel estimation with low pilot overhead.

eess.SP↗

arXiv2020

Channel Feedback for Reconfigurable Intelligent Surface Assisted Wireless Communications

Reconfigurable intelligent surface (RIS) has received widespread attention owing to the superiority of changing the wireless propagation environment intelligently. Channel feedback is essential in frequency division duplex (FDD) RIS-assisted wireless communications, since the downlink channel state information (CSI) needs to be acquired by the base station (BS) from the user equipment (UE) for the joint beamforming at the BS and the RIS. In this paper, we exploit the single-structured sparsity of RIS channel, which means that the sparse angular-domain channels of different users share the same structured sparsity only in the column dimension, but not in the row dimension. Based on this characteristic, we propose a dimension reduced channel feedback scheme with the low overhead. Specifically, the downlink CSI can be expressed with the structured information and unstructured information. The structured information of the multi-user channels can be fed back to the BS only by one user according to the single-structured sparsity, then the unstructured information can be fed back with a fairly low overhead by different users, respectively. Moreover, by utilizing the angle coherence time, the per-user overhead can be reduced further, while the near-optimal performance can still be guaranteed. Simulation results show that, the proposed scheme can reduce the channel feedback overhead by 80% compared to the conventional method.

cs.IT↗

arXiv2019

Reconfigurable Intelligent Surface-Based Wireless Communication: Antenna Design, Prototyping and Experimental Results

One of the key enablers of future wireless communications is constituted by massive multiple-input multiple-output (MIMO) systems, which can improve the spectral efficiency by orders of magnitude. However, in existing massive MIMO systems, conventional phased arrays are used for beamforming, which result in excessive power consumption and hardware cost. Recently, reconfigurable intelligent surface (RIS) has been considered as one of the revolutionary technologies to enable energy-efficient and smart wireless communications, which is a two-dimensional structure with a large number of passive elements. In this paper, we propose and develop a new type of high-gain yet low-cost RIS having 256 elements. The proposed RIS combines the functions of phase shift and radiation together on an electromagnetic surface, where positive intrinsic-negative (PIN) diodes are used to realize 2-bit phase shifting for beamforming. Based on this radical design, the world's first wireless communication prototype using RIS having 256 2-bit elements is designed and developed. Specifically, the prototype conceived consists of modular hardware and flexible software, including the hosts for parameter setting and data exchange, the universal software radio peripherals (USRPs) for baseband and radio frequency (RF) signal processing, as well as the RIS for signal transmission and reception. Our performance evaluation confirms the feasibility and efficiency of RISs in future wireless communications. More particularly, it is shown that a 21.7 dBi antenna gain can be obtained by the proposed RIS at 2.3 GHz, while at the millimeter wave (mmWave) frequency, i.e., 28.5 GHz, a 19.1 dBi antenna gain can be achieved. Furthermore, the over-the-air (OTA) test results show that the RIS-based wireless communication prototype developed is capable of significantly reducing the power consumption.

cs.IT↗

arXiv2019

Channel Estimation for Orthogonal Time Frequency Space (OTFS) Massive MIMO

Orthogonal time frequency space (OTFS) modulation outperforms orthogonal frequency division multiplexing (OFDM) in high-mobility scenarios. One challenge for OTFS massive MIMO is downlink channel estimation due to the large number of base station antennas. In this paper, we propose a 3D structured orthogonal matching pursuit algorithm based channel estimation technique to solve this problem. First, we show that the OTFS MIMO channel exhibits 3D structured sparsity: normal sparsity along the delay dimension, block sparsity along the Doppler dimension, and burst sparsity along the angle dimension. Based on the 3D structured channel sparsity, we then formulate the downlink channel estimation problem as a sparse signal recovery problem. Simulation results show that the proposed algorithm can achieve accurate channel state information with low pilot overhead.

cs.IT↗

arXiv2018

Hybrid Precoding-Based Millimeter-Wave Massive MIMO-NOMA with Simultaneous Wireless Information and Power Transfer

Non-orthogonal multiple access (NOMA) has been recently considered in millimeter-wave (mmWave) massive MIMO systems to further enhance the spectrum efficiency. In addition, simultaneous wireless information and power transfer (SWIPT) is a promising solution to maximize the energy efficiency. In this paper, for the first time, we investigate the integration of SWIPT in mmWave massive MIMO-NOMA systems. As mmWave massive MIMO will likely use hybrid precoding (HP) to significantly reduce the number of required radio-frequency (RF) chains without an obvious performance loss, where the fully digital precoder is decomposed into a high-dimensional analog precoder and a low-dimensional digital precoder, we propose to apply SWIPT in HP-based MIMO-NOMA systems, where each user can extract both information and energy from the received RF signals by using a power splitting receiver. Specifically, the cluster-head selection (CHS) algorithm is proposed to select one user for each beam at first, and then the analog precoding is designed according to the selected cluster heads for all beams. After that, user grouping is performed based on the correlation of users' equivalent channels. Then, the digital precoding is designed by selecting users with the strongest equivalent channel gain in each beam. Finally, the achievable sum rate is maximized by jointly optimizing power allocation for mmWave massive MIMO-NOMA and power splitting factors for SWIPT, and an iterative optimization algorithm is developed to solve the non-convex problem. Simulation results show that the proposed HP-based MIMO-NOMA with SWIPT can achieve higher spectrum and energy efficiency compared with HP-based MIMO-OMA with SWIPT.

cs.IT↗

arXiv2018

Mixed-ADC/DAC Multipair Massive MIMO Relaying Systems: Performance Analysis and Power Optimization

High power consumption and expensive hardware are two bottlenecks for practical massive multiple-input multiple-output (mMIMO) systems. One promising solution is to employ low-resolution analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). In this paper, we consider a general multipair mMIMO relaying system with a mixed-ADC/DAC architecture, in which some antennas are connected to low-resolution ADCs/DACs, while the rest of the antennas are connected to high-resolution ADCs/DACs. Leveraging on the additive quantization noise model, both exact and approximate closed-form expressions for the achievable rate are derived. It is shown that the achievable rate can approach the unquantized one by using only 2-3 bits of resolutions. Moreover, a power scaling law is presented to reveal that the transmit power can be scaled down inversely proportional to the number of antennas at the relay. We further propose an efficient power allocation scheme by solving a complementary geometric programming problem. In addition, a trade-off between the achievable rate and power consumption for different numbers of low-resolution ADCs/DACs is investigated by deriving the energy efficiency. Our results reveal that the large antenna array can be exploited to enable the mixed-ADC/DAC architecture, which significantly reduces the power consumption and hardware cost for practical mMIMO systems.

cs.IT↗

arXiv2018

Optimal 3D-Trajectory Design and Resource Allocation for Solar-Powered UAV Communication Systems

In this paper, we investigate the resource allocation algorithm design for multicarrier solar-powered unmanned aerial vehicle (UAV) communication systems. In particular, the UAV is powered by solar energy enabling sustainable communication services to multiple ground users. We study the joint design of the three-dimensional (3D) aerial trajectory and the wireless resource allocation for maximization of the system sum throughput over a given time period. As a performance benchmark, we first consider an offline resource allocation design assuming non-causal knowledge of the channel gains. The algorithm design is formulated as a mixed-integer non-convex optimization problem taking into account the aerodynamic power consumption, solar energy harvesting, a finite energy storage capacity, and the quality-of-service (QoS) requirements of the users. Despite the non-convexity of the optimization problem, we solve it optimally by applying monotonic optimization to obtain the optimal 3D-trajectory and the optimal power and subcarrier allocation policy. Subsequently, we focus on online algorithm design which only requires real-time and statistical knowledge of the channel gains. The optimal online resource allocation algorithm is motivated by the offline scheme and entails a high computational complexity. Hence, we also propose a low-complexity iterative suboptimal online scheme based on successive convex approximation. Our results unveil the tradeoff between solar energy harvesting and power-efficient communication. In particular, the solar-powered UAV first climbs up to a high altitude to harvest a sufficient amount of solar energy and then descents again to a lower altitude to reduce the path loss of the communication links to the users it serves.

cs.IT↗

arXiv2018

Super-resolution channel estimation for mmWave massive MIMO with hybrid precoding

Channel estimation is challenging for millimeter-wave (mmWave) massive MIMO with hybrid precoding, since the number of radio frequency (RF) chains is much smaller than that of antennas. Conventional compressive sensing based channel estimation schemes suffer from severe resolution loss due to the channel angle quantization. To improve the channel estimation accuracy, we propose an iterative reweight (IR)-based super-resolution channel estimation scheme in this paper. By optimizing an objective function through the gradient descent method, the proposed scheme can iteratively move the estimated angle of arrivals/departures (AoAs/AoDs) towards the optimal solutions, and finally realize the super-resolution channel estimation. In the optimization, a weight parameter is used to control the tradeoff between the sparsity and the data fitting error. In addition, a singular value decomposition (SVD)-based preconditioning is developed to reduce the computational complexity of the proposed scheme. Simulation results verify the better performance of the proposed scheme than conventional solutions.

cs.IT↗

arXiv2018

How to interconnect for Massive MIMO Self-Calibration?

In time-division duplexing (TDD) systems, massive multiple-input multiple-output (MIMO) relies on the channel reciprocity to obtain the downlink (DL) channel state information (CSI) with the acquired uplink (UL) CSI at the base station (BS). However, the mismatches in the radio frequency (RF) analog circuits at different antennas at the BS break the end-to-end UL and DL channel reciprocity. To restore the channel reciprocity, it is necessary to calibrate all the antennas at the BS. This paper addresses the interconnection strategy for the internal self-calibration at the BS where different antennas are interconnected via hardware transmission lines. Specifically, the paper reveals the optimality of the star interconnection and the daisy chain interconnection respectively. From the results, we see the star interconnection is the optimal interconnection strategy when the BS are given the same number of measurements. On the other hand, the daisy chain interconnection outperforms the star interconnection when the same amount of time resources are consumed. Numerical results corroborate our theoretical analyses.

eess.SP↗

arXiv2018

Resource Allocation for Solar Powered UAV Communication Systems

In this paper, we investigate the resource allocation design for multicarrier (MC) systems employing a solar powered unmanned aerial vehicle (UAV) for providing communication services to multiple downlink users. We study the joint design of the three-dimensional positioning of the UAV and the power and subcarrier allocation for maximization of the system sum throughput. The algorithm design is formulated as a mixed-integer non-convex optimization problem, which requires a prohibitive computational complexity for obtaining the globally optimal solution. Therefore, a low-complexity suboptimal iterative solution based on successive convex approximation is proposed. Simulation results confirm that the proposed suboptimal algorithm achieves a substantially higher system sum throughput compared to several baseline schemes.

cs.IT↗

arXiv2017

Low RF-Complexity Technologies to Enable Millimeter-Wave MIMO with Large Antenna Array for 5G Wireless Communications

Millimeter-wave (mmWave) MIMO with large antenna array has attracted considerable interests from academic and industry communities, as it can provide larger bandwidth and higher spectrum efficiency. However, with hundreds of antennas, the number of radio frequency (RF) chains required by mmWave MIMO is also huge, leading to unaffordable hardware cost and power consumption in practice. In this paper, we investigate low RF-complexity technologies to solve this bottleneck. We first review the evolution of low RF-complexity technologies from microwave frequencies to mmWave frequencies. Then, we discuss two promising low RF-complexity technologies for mmWave MIMO systems in detail, i.e., phased array based hybrid precoding (PAHP) and lens array based hybrid precoding (LAHP), including their principles, advantages, challenges, and recent results. We compare the performance of these two technologies to draw some insights about how they can be deployed in practice. Finally, we conclude this paper and point out some future research directions in this area.

cs.IT↗

arXiv2017

Millimeter-Wave Communication with Non-Orthogonal Multiple Access for 5G

To further improve the system capacity for 5G, we explore the integration of non-orthogonal multiple access (NOMA) in mmWave communications (mmWave-NOMA) for future 5G systems. Compared with the conventional NOMA, the distinguishing feature of mmWave-NOMA is that, it is usually characterized by transmit/receive beamforming with large antenna arrays. In this paper, we focus on the design challenges of mmWave-NOMA due to beamforming. Firstly, we study how beamforming affects the sum-rate performance of mmWave-NOMA, and find that with conventional single-beam forming, the performance may be offset by the relative angle between NOMA users. Then, we consider multi-beam forming for mmWave-NOMA, which is shown to be able to achieve promising performance enhancement as well as robustness. We further investigate the challenging joint design of the intertwined power allocation and user pairing for mmWave-NOMA. We also discuss the challenges and propose some potential solutions in detail. Finally, we consider hybrid spatial division multiple access (SDMA) and NOMA in mmWave communications, where some possible system configurations and the corresponding solutions are discussed to address the multi-user issues including multi-user precoding and multi-user interference (MUI) mitigation.

cs.IT↗

arXiv2017

Power-Efficient and Secure WPCNs with Hardware Impairments and Non-Linear EH Circuit

In this paper, we design a robust resource allocation algorithm for a wireless-powered communication network (WPCN) taking into account residual hardware impairments (HWIs) at the transceivers, the imperfectness of the channel state information, and the non-linearity of practical radio frequency energy harvesting circuits. In order to ensure power-efficient secure communication, physical layer security techniques are exploited to deliberately degrade the channel quality of a multiple-antenna eavesdropper. The resource allocation algorithm design is formulated as a non-convex optimization problem for minimization of the total consumed power in the network, while guaranteeing the quality of service of the information receivers in terms of secrecy rate. The globally optimal solution of the optimization problem is obtained via a two-dimensional search and semidefinite programming relaxation. To strike a balance between computational complexity and system performance, a low-complexity iterative suboptimal resource allocation algorithm is then proposed. Numerical results demonstrate that both the proposed optimal and suboptimal schemes can significantly reduce the total system power consumption required for guaranteeing secure communication, and unveil the impact of HWIs on the system performance: (1) residual HWIs create a system performance bottleneck in the high transmit/receive power regimes; (2) increasing the number of transmit antennas can effectively reduce the system power consumption and alleviate the performance degradation due to residual HWIs; (3) imperfect CSI increases the system power consumption and exacerbates the impact of residual HWIs.

cs.IT↗

arXiv2017

Compressive Sensing Techniques for Next-Generation Wireless Communications

A range of efficient wireless processes and enabling techniques are put under a magnifier glass in the quest for exploring different manifestations of correlated processes, where sub-Nyquist sampling may be invoked as an explicit benefit of having a sparse transform-domain representation. For example, wide-band next-generation systems require a high Nyquist-sampling rate, but the channel impulse response (CIR) will be very sparse at the high Nyquist frequency, given the low number of reflected propagation paths. This motivates the employment of compressive sensing based processing techniques for frugally exploiting both the limited radio resources and the network infrastructure as efficiently as possible. A diverse range of sophisticated compressed sampling techniques is surveyed and we conclude with a variety of promising research ideas related to large-scale antenna arrays, non-orthogonal multiple access (NOMA), and ultra-dense network (UDN) solutions, just to name a few.

cs.IT↗

arXiv2017

Reliable Beamspace Channel Estimation for Millimeter-Wave Massive MIMO Systems with Lens Antenna Array

Millimeter-wave massive MIMO with lens antenna array can considerably reduce the number of required radio-frequency (RF) chains by beam selection. However, beam selection requires the base station to acquire the accurate information of beamspace channel. This is a challenging task, as the size of beamspace channel is large while the number of RF chains is limited. In this paper, we investigate the beamspace channel estimation problem in mmWave massive MIMO systems with lens antenna array. Specifically, we first design an adaptive selecting network for mmWave massive MIMO systems with lens antenna array, and based on this network, we further formulate the beamspace channel estimation problem as a sparse signal recovery problem. Then, by fully utilizing the structural characteristics of mmWave beamspace channel, we propose a support detection (SD)-based channel estimation scheme with reliable performance and low pilot overhead. Finally, the performance and complexity analyses are provided to prove that the proposed SD-based channel estimation scheme can estimate the support of sparse beamspace channel with comparable or higher accuracy than conventional schemes. Simulation results verify that the proposed SD-based channel estimation scheme outperforms conventional schemes and enjoys satisfying accuracy, even in the low SNR region as the structural characteristics of beamspace channel can be exploited.

cs.IT↗