arXiv subjects

Louise Banniard

Publications and source records attributed to Louise Banniard.

6 recordsLinked to original sources

arXiv2026

Measurement of the Casimir force between superconductors

The Casimir force follows from quantum fluctuations of the electromagnetic field and yields a nonlinear attractive force between closely spaced conductive objects. Measuring the Casimir force in superconducting materials on either side of the transition should allow to isolate the specific contribution of low frequencies to the Casimir effect. There is significant interest in this contribution as it is suspected to be involved in an unexplained discrepancy between predictions and measurements of the Casimir force between normal metals. Here, we observe a force acting on a superconducting drum resonator integrated in a microwave optomechanical cavity through the nonlinear dynamics this force imparts to the resonator. The measured dynamics points to an extremely intense force found to be compatible in magnitude with the Casimir force for the range of vacuum separations that can be expected in this device, and incompatible with estimates of other known sources of nonlinearity. This nonlinearity is intense enough that, with a modified design, this device type should operate in the single-phonon nonlinear regime. Accessing this regime has been a long-standing goal that would greatly facilitate quantum operations of mechanical resonators.

cond-mat.mes-hall↗

arXiv2024

Optomechanics driven by noisy and narrowband fields

We report a study of a cavity optomechanical system driven by narrow-band electromagnetic fields, which are applied either in the form of uncorrelated noise, or as a more structured spectrum. The bandwidth of the driving spectra is smaller than the mechanical resonant frequency, and thus we can describe the resulting physics using concepts familiar from regular cavity optomechanics in the resolved-sideband limit. With a blue-detuned noise driving, the noise-induced interaction leads to anti-damping of the mechanical oscillator, and a self-oscillation threshold at an average noise power that is comparable to that of a coherent driving tone. This process can be seen as noise-induced dynamical amplification of mechanical motion. However, when the noise bandwidth is reduced down to the order of the mechanical damping, we discover a large shift of the power threshold of self-oscillation. This is due to the oscillator adiabatically following the instantaneous noise profile. In addition to blue-detuned noise driving, we investigate narrow-band driving consisting of two coherent drive tones nearby in frequency. Also in these cases, we observe deviations from a naive optomechanical description relying only on the tones' frequencies and powers.

quant-ph↗

arXiv2023

Ground-state cooling of a mechanical oscillator by heating

Dissipation and the accompanying fluctuations are often seen as detrimental for quantum systems, since they are associated with fast relaxation and loss of phase coherence. However, it has been proposed that a pure state can be prepared if external noise induces suitable downwards transitions, while exciting transitions are blocked. We demonstrate such a refrigeration mechanism in a cavity optomechanical system, where we prepare a mechanical oscillator in its ground state by injecting strong electromagnetic noise at frequencies around the red mechanical sideband of the cavity. The optimum cooling is reached with a noise bandwidth smaller than, but on the order of the cavity decay rate. At higher bandwidths, cooling is less efficient. In the opposite regime where the noise bandwidth becomes comparable to the mechanical damping rate, damping follows the noise amplitude adiabatically, and the cooling is also suppressed.

quant-ph↗

arXiv2022

Fast feedback control of mechanical motion using circuit optomechanics

Measurement-based control, utilizing an active feedback loop, is a standard tool in technology. Feedback control is also emerging as a useful and fundamental tool in quantum technology and in related fundamental studies, where it can be used to prepare and stabilize pure quantum states in various quantum systems. Feedback-cooling of center-of-mass micromechanical oscillators, which typically exhibit a high thermal noise far above the quantum regime has been particularly actively studied and has recently been shown to allow for ground-state cooling using optical measurements. Here, we realize measurement-based feedback operations in an electromechanical system, cooling the mechanical thermal noise down to 3 quanta, limited by added amplifier noise. Counter-intuitively, we also obtain significant cooling when the system is pumped at the blue optomechanical sideband, where the system is unstable without feedback.

quant-ph↗

arXiv2021

Real-time sensing with multiplexed optomechanical resonators

Nanoelectromechanical resonators have been successfully used for a variety of sensing applications. Their extreme resolution comes from their small size at the cost of low capture area, making the "needle in a haystack" issue acute. This leads to poor instrument sensitivity and long analysis time. Moreover, electrical transductions are limited in frequency, which limits the achievable mechanical bandwidth again limiting throughput. Multiplexing a large number of high-frequency resonators appears as a solution, but this is complex with electrical transductions. We propose here a route to solve these issues, with a multiplexing scheme for very high frequency optomechanical resonators. We demonstrate the simultaneous frequency measurement of three silicon microdisks resonators fabricated through a Very Large Scale Integration process. The readout architecture is simple and does not degrade the sensing resolutions. This paves the way towards the realization of sensors for multi-parametric analysis, extremely low limit of detection and response time.

physics.app-ph↗

arXiv2020

Optomechanical mass spectrometry

It has been demonstrated in the recent years that nanomechanical mass spectrometry was well suited for the analysis of specific high mass species such as viruses. Still, the exclusive use of one-dimensional devices such as vibrating beams forces a trade-off between analysis time (related to capture area) and mass resolution (inversely proportional to device mass). Such devices also require complex readout schemes to simultaneously monitor multiple resonance modes, in particular when stiffness or shape come into play, which degrades mass resolution. These issues restrict nanomechanical MS to the analysis of species with specific properties. We report here the first demonstration of single-particle mass spectrometry with nano-optomechanical resonators fabricated with a Very Large Scale Integration process. The unique motion sensitivity of optomechanical techniques allows the use of resonators with new topologies. The device introduced here is designed to be impervious to particle position, stiffness or shape, opening the way to the analysis of large aspect ratio biological objects of great significance such as viruses with a tail or fibrils. Compared to top-down beam resonators with electrical read-out and state-of-the-art mass resolution, we show a three-fold improvement in capture area with no resolution degradation, despite the use of a single resonance mode. Short analysis time is in reach thanks to the sensitivity and bandwidth of optomechanical read-out and its compliance with telecom multiplexing techniques.

physics.app-ph↗